Immobilization of native and dextran-free dextransucrases from Leuconostoc mesenteroides NRRL B-512F for the synthesis of glucooligosaccharides

Dextransucrase from Leuconostoc mesenteroides NRRL B-512F was immobilized using two different methods: covalent attachment to activated silica and entrapment in calcium alginate. For immobilization on silica, native enzyme and dextran-free enzyme were compared. However, the entrapment in calcium alginate beads gave the best results in terms of immobilization yield and stability. This biocatalyst was employed in the acceptor reaction with maltose showing similar glucooligosaccharide production than the native enzyme but increased operational stability.     

Immobilized cell technology applied in solubilization of insoluble inorganic (rock) phosphates and P plant acquisition

This paper reviews current knowledge of the production of organic acids by immobilized microorganisms with a simultaneous solubilization of rock phosphate in fermentation and soil conditions. The most widely applied methods are based on the passive immobilization in preformed porous carriers and entrapment of the microbial cells in natural gels. In general, immobilized systems show higher acid producing and rock phosphate solubilizing activity than freely suspended cells. The potential of gel-entrapped P-solubilizers and mycorrhizal fungi as microbial soil inoculants is also pointed out. Some advantages and constraints of using immobilized cells are discussed and a special emphasis on further research is given.     

Partial nitrification to nitrite for treating ammonium-rich organic wastewater by immobilized biomass system

This study focused on the characteristics of the partial nitrification and degradation of organics with immobilized biomass beads in the treatment of ammonium-rich organic wastewater. Sodium alginate (SA) was selected as the best entrapment support after comparing partial nitrification rate and adsorption efficiency. The immobilization methods were optimized by an orthogonal experiment. Zeta position and BET surface area were used to explain the adsorption behavior of SA immobilized beads. FT-IR revealed that a SA immobilized biomass bead was not a simply physical mixture of SA and biomass. The porous structure of SA immobilized biomass beads were observed by scanning electron microscopy (SEM), which confirmed the porosity of the beads. According to the experimental data, the effects of pH and temperature on partial nitrification and COD removal were evidently weakened in SA immobilized biomass beads due to the “protective” effect of immobilization, whereas the effects of HRT and DO were enhanced.     

产糖化酶黑曲霉固定化方法比较的研究

采用海藻酸钙凝胶电埋法、以沸石、多孔聚酯等材料为固定化载体的吸附法固定黑曲霉（Aspergillus niger AS3.4309)菌丝细胞,以游离菌丝体作为对照,进行发酵产糖化酶的比较,结果表明：以聚酯泡沫作为固定化载体吸附固定化菌丝细胞产糖化酶活力最高。在产糖化酶的发酵过程中,与游离菌丝体细胞相比,固定化黑曲霉持续产酶时间有一定程度的延长。     

Evaluation of activation methods with cellulose beads for immunosorbent purification of immunoglobulins

Attempts were made to evaluate the chemical properties of cross-linked cellulose beads in order to utilize them as a support material for the large scale purification of specific immunoglobulins via immunosorbent chromatography with goat anti-human IgG serving as the model affinity ligand. Since these cellulose beads have sufficient mechanical strength to sustain a high flow rate of viscous fluids, they are ideal for rapid purification of large fluid volumes. The beads were activated with cyanogen bromide, tosyl chloride, cyanuric chloride or oxidation reagents such as chromium trioxide, sodium periodate and dimethylsulfoxide-carbodiimide before the antibodies were immobilized under mild conditions. The inert hydroxyl groups were thus converted into more active cyanate ester, tosylate, reactive acyl-like chlorines, and carbonyl groups which readily react with amino groups of antibodies. Antibodies were immobilized on the activated cellulose beads under mild conditions with an average yield of 42.3%. Every immobilization method had disadvantages. The binding activity of the immobilized antibody depended on its concentration. Very high binding efficiency was achieved when the concentration was less than 0.2 mg/ml; however, the efficiency was only about 5% when the concentration was greater than 2 mg/ml. The binding activity of immobilized antibodies was affected by the steric factors imposed by the support material but not affected by the immobilization methods. Although some non-specific interaction between plasma components and the cellulose bead immunosorbent occurred, specific immunoglobulin could be purified from plasma in a single step.     

Effects of immobilization on biomass production and acetic acid fermentation of Acetobacter aceti as a function of temperature and pH

Summary Acetobacter aceti cells were immobilized using entrapment in Ca-alginate gel and adsorption on preformed cellulose beads. The cell number within the supports showed no significant alterations on changing temperature or pH, whereas the acetic acid production was slightly increased by immobilization.     

Comparative studies on extracellular protease secretion and glucoamylase production by free and immobilized <Emphasis Type="Italic">Aspergillus niger</Emphasis> cultures

The effects of cell immobilization on the secretion of extracellular proteases and glucoamylase production by Aspergillus niger were investigated under a variety of immobilization techniques and culture conditions. Immobilization was achieved by means of cell attachment on metal surfaces or spore entrapment and subsequent growth on porous Celite beads. Free-suspension cultures were compared with immobilized mycelium under culture conditions that included growth in shake flasks and an airlift bioreactor. Cell attachment on metal surfaces minimized the secretion of proteases while enhancing glucoamylase production by the fungus. Growth on Celite beads in shake-flask cultures reduced the specific activity of the secreted proteases from 128 to 61 U g⁻¹, while glucoamylase specific activity increased from 205 to 350 U g⁻¹. The effect was more pronounced in bioreactor cultures. A reduction of six orders of magnitude in protease specific activities was observed when the fungus grew immobilized on a rolled metal screen, which served as the draft tube of an airlift bioreactor. Received 29 October 2001/ Accepted in revised form 14 June 2002     

Immobilization of enzymes with polyaziridines.

A novel method of enzyme immobilization using a low molecular weight prepolymer of tri-functional aziridines which can immobilize enzymes both by covalent attachment and entrapment within a gel matrix is described. The enzymes are immobilized on a solid support and exhibit an excellent retention of enzymatic activity. The immobilization procedure is essentially a single step process which can be easily performed at room temperature or 4 degrees C in either aqueous solution or in an inert organic solvent. The polyaziridines used in the immobilization are nontoxic, available in bulk at low cost and completely miscible with water and many organic solvents, thus providing one of the most satisfactory methods of immobilization available.     

Immobilization of Alcaligenes eutrophus using PVA crosslinked with sodium nitrate

A new cell immobilization technique using polyvinyl alcohol crosslinked with sodium nitrate was developed. This new technique can simultaneously eliminate the agglomeration of PVA beads and the toxicity of boric acid caused by the PVA-boric acid and PVA-orthophosphate methods. Alcaligenes eutrophus was immobilized using four different PVA entrapment processes. The stability, swelling, relative mechanical strength and denitrification activity of the PVA beads were compared in this study. © Rapid Science Ltd. 1998     

Immobilized microalgae in biotechnology

Here we present a brief account of current data on immobilization of oxygenic phototrophic microorganisms—cyanobacteria and eukaryotic microalgae—in natural and artificial experimental systems. We emphasize that immobilization e.g. in biofilms is a basic, widespread in nature strategy ensuring the survival of microorganisms. Accordingly, the artificially immobilized microalgal cells might be considered as a special group of biomimetic materials. Special attention is paid to the effect(s) of different immobilization on the physiology of microalgal cells and their stress tolerance as well as productivity of microalgal cultures. A comparison of the advantages and drawbacks of different immobilization techniques and cell carriers is presented. The review concludes with outlook on the possibilities of using of the immobilized phototrophic cells in biotechnology. Specific areas include (but not limited to) the biomass and metabolites production and harvesting, removal of heavy metals, biocapture of nutrients from wastewater and destroying of organic pollutants are explored.     

THE USE OF IMMOBILIZATION IN ALGINATE BEADS FOR LONG-TERM STORAGE OF PSEUDANABAENA GALEATA (CYANOBACTERIA) IN THE LABORATORY1

A new method for long-term storage of algal cultures in the laboratory was tested. The procedure is based on the cell immobilization technique. Cells of the filamentous cyanobacterium Pseudanabaena galeata Bocher were immobilized in sodium-alginate beads and stored for 14–18 months. The structure and functional features of the organism were maintained in this immobilized state and no ultrastructural biochemical, or growth rate differences were detected between stock and previously immobilized cell cultures after this period. We discuss the advantages of this method compared to other preservation methods and recommend the use of immobilization in alginate beads for long-term algal storage.     

Urease Immobilization on Arylamine Glass Beads and its Characterization

Jack bean urease has been immobilized on arylamine glass beads (200–400 mesh size, 75–100 Å pore size) and its properties compared with soluble enzyme. The binding of urease was 13.71 mg per gram beads. The K_m for soluble and immobilized urease for urea was 4.20 mM and 8.81 mM, respectively. V_max values of urease decreased from 200 to 43.48 μmol of ammonia formed per min per mg protein at 37°C on immobilization. Both pH and buffer ions influenced the activities of soluble as well as immobilized urease. Soluble urease exhibited pH optima at 5.5 and 8.0. However, immobilized urease showed one additional pH optimum at 6.5. In comparison to phosphate buffer, citrate buffer was inhibitory to urease activity. Immobilization of urease on arylamine glass beads resulted in improved thermal, storage and operational stability. Because of inertness of support and stability of immobilized urease, the preparation can find applications in ‘artificial kidney’ and urea estimation in biological fluids viz., blood, milk etc.     

固定化枯草杆菌生物吸附去除水中Cd的研究

采用明胶、琼脂、海藻酸钠作为载体对枯草杆菌进行固定,通过对三种载体的包埋效果、传质性能及操作难易的比较来选择适宜的固定化载体,比较固定化微生物与游离微生物及固定化载体海藻酸钠处理含镉废水的效果,并研究温度、pH值等环境因子对固定化枯草杆菌处理含镉废水效果的影响。结果表明：海藻酸钠作为固定化载体其传质性能强、方法简便,机械强度好;固定化枯草杆菌对含镉废水去除效果明显高于游离枯草杆菌。且随着废水中Cd浓度的变化,固定化枯草杆菌处理效果存在差异,在Cd浓度为1．0mg．L^-1 ～20mg．L^-1时,Cd的去除率在24h呈现3次曲线回归,而48h以4次多项式拟合;pH值对固定化枯草杆菌处理效果产生一定影响,在pH5．0-pH7．0,随pH值升高去除效率下降,温度在20℃-30℃,固定化枯草杆菌均有较好的处理效果。     

Immobilization of thermoalkalophilic recombinant esterase enzyme by entrapment in silicate coated Ca-alginate beads and its hydrolytic properties

Thermoalkalophilic esterase enzyme from Bal?ova (Agamemnon) geothermal site were aimed to be immobilized effectively via a simple and cost-effective protocol in silicate coated Calcium alginate (Ca-alginate) beads by entrapment. The optimal immobilization conditions of enzyme in Ca-alginate beads were investigated and obtained with 2% alginate using 0.5mg/ml enzyme and 0.7 M CaCl(2) solution. In order to prevent enzyme from leaking out of the gel beads, Ca-alginate beads were then coated with silicate. Enzyme loading efficiency and immobilization yield for silicate coated beads was determined as 98.1% and 71.27%, respectively and compared with non-coated ones which were 68.5% and 45.80%, respectively. Surface morphologies, structure and elemental analysis of both silicate coated and non-coated alginate beads were also compared using Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscope (SEM) equipped with Energy-dispersive X-ray spectroscopy (EDX). Moreover, silicate coated alginate beads enhanced reusability of esterase in continuous processes compared to non-coated beads. The hydrolytic properties of free and immobilized enzyme in terms of storage and thermal stability as well as the effects of the temperature and pH were determined. It was observed that operational, thermal and storage stabilities of the esterase were increased with immobilization.     

Immobilized microorganisms for hydrogen and ammonia production

Biological hydrogen and ammonia production are currently being studied as a means of lessening the dependence on non-renewable resources. Some of the systems considered show additional potential in various waste treatment processes. As the systems currently being examined employ a variety of organisms and metabolic pathways, the energetics of the various modes of hydrogen and ammonia production are examined in detail. The use of immobilized microorganisms may offer some advantages over free-living cultures. The present status of the work in this field employing immobilized microorganisms is reviewed, and areas for future research and the potential impacts of this technology are discussed.     

Biofiltration of volatile organic compounds

The removal of volatile organic compounds (VOCs) from contaminated airstreams has become a major air pollution concern. Improvement of the biofiltration process commonly used for the removal of odorous compounds has led to a better control of key parameters, enabling the application of biofiltration to be extended also to the removal of VOCs. Moreover, biofiltration, which is based on the ability of micro-organisms to degrade a large variety of compounds, proves to be economical and environmentally viable. In a biofilter, the waste gas is forced to rise through a layer of packed porous material. Thus, pollutants contained in the gaseous effluent are oxidised or converted into biomass by the action of microorganisms previously fixed on the packing material. The biofiltration process is then based on two principal phenomena: (1) transfer of contaminants from the air to the water phase or support medium, (2) bioconversion of pollutants to biomass, metabolic end-products, or carbon dioxide and water. The diversity of biofiltration mechanisms and their interaction with the microflora mean that the biofilter is defined as a complex and structured ecosystem. As a result, in addition to operating conditions, research into the microbial ecology of biofilters is required in order better to optimise the management of such biological treatment systems.     

Immobilization of alpha-glucosidase in chitosan coated polygalacturonic acid

Crude alpha-glucosidase from Baker's yeast was immobilized in polygalacturonic acid beads and coated with chitosan. Chemical and physical characterization were performed by using p-nitrophenyl-alpha-D-glucopyranoside (pNPG) as an artificial substrate. Operation, thermal, pH, and strorage stabilities of the free and immobilized enzyme were also examined. The stabilities of immobilized enzyme were found to be better than that of the free enzyme. Furthermore, the hydrolysis rate of the chitosan coated alpha-glucosidase polygalacturonic acid beads were studied. In conclusion, the enzyme beads appear to have good characteristics and offer the prospect that this system may find application in enzyme immobilization, in addition to controlled drug release studies.     

Immobilization of laccase from Streptomyces psammoticus and its application in phenol removal using packed bed reactor

Laccase was produced from Streptomyces psammoticus under solid-state fermentation. The enzyme was partially purified by ammonium sulphate precipitation and was immobilized in alginate beads by entrapment method. Calcium alginate beads retained 42.5% laccase activity, while copper alginate beads proved a better support for laccase immobilization by retaining 61% of the activity. Phenol and colour removal from a phenol model solution was carried out using immobilized laccase. Batch experiments were performed using packed bed bioreactor, containing immobilized beads. Reusability of the immobilized matrix was studied for up to 8 successive runs, each run with duration of 6 h. The system removed 72% of the colour and 69.9% of total phenolics from the phenol model solution after the initial run. The immobilized system maintained 50% of its efficiency after eight successive runs. The degradation of phenolic compounds by immobilized laccase was evaluated and confirmed by Thin layer chromatography and nuclear magnetic resonance spectroscopy.     

PVA-Ca(NO3)2法包埋固定氧化亚铁硫杆菌研究

首次报道了把聚乙烯醇(PVA)、海藻酸钠混合水溶胶和氧化亚铁硫杆菌混合后滴入1%~5%(W/V)的Ca(NO3)2溶液中凝固成型,并把成型后的颗粒置-20℃条件下冷冻1d,从而形成固定化颗粒,把该颗粒在摇瓶中进行分批培养,对Fe2 最大氧化速率可达2.45g/(L.h)。而且整个固定化操作简单,颗粒不粘连、强度高、稳定性好,可以同时消除PVA-H3BO3法中PVA颗粒的粘连膨胀和H3BO3对微生物的毒性,具有很好的应用价值。     

桦褶孔菌漆酶固定化及其对染料的降解

采用壳聚糖交联法和海藻酸钠-壳聚糖包埋交联法固定化桦褶孔菌产生的漆酶,探讨最佳固定化条件,固定化漆酶的温度,pH稳定性及操作稳定性,并以两种固定化酶分别对4种染料进行了降解.结果表明:(1)壳聚糖交联法固定化漆酶的最佳条件为:壳聚糖2.5%,戊二醛7%,交联时间2h,固定化时间5h,给酶量1g壳聚糖小球:1mL酶液(1U/mL),固定化效率56%;(2)海藻酸钠-壳聚糖包埋交联法固定化漆酶的最佳条件为:海藻酸钠浓度4%,壳聚糖浓度0.7%,氯化钙浓度5%,戊二醛浓度0.6%,给酶量4mL 4%海藻酸钠:1mL酶液(1U/mL),固定化效率高达86%;(3)固定化的漆酶相比游离漆酶有更好的温度和pH稳定性;(4)比较两种固定化漆酶,海藻酸钠-壳聚糖包埋交联法固定化酶的温度及酸度稳定性要优于壳聚糖固定化酶,但可重复操作性要弱于后者,两者重复使用8次后的剩余酶活比率分别为71%及64%;(5)两种固定化酶对所选的4种不同结构的合成染料均有较好的降解效果,其中壳聚糖固定化酶对茜素红的降解效果及重复使用性极佳,重复降解40mg/L的茜素红10次,降解率仍保持在100%.