Regeneration of plantlets fromEnteromorpha (Ulvales,Chlorophyta) protoplasts in axenic culture

High yields of protoplasts have been obtained from vegetative thalli of three species ofEnteromorpha by enzymatic degradation of the cell wall. Several commercial and crude enzymes prepared from the digestive system and hepatopancrease of abalone and top-shell were tested at different concentrations and combinations to evaluate the yield. Commercial enzymes in combination with either abalone or top-shell crude enzymes, consistently produced a high yield of protoplasts from all three species. High regeneration rate (85–95%) occurred in the protoplasts cultured at a density greater than 1.72 × 10³ cells cm⁻² at 20 and 25°C. Light intensities tested in the present study did not affect protoplast wall formation and regeneration. Protoplasts, after regenerating the cell wall, followed different types of developmental patterns under identical culture conditions. In one type some cells underwent repeated cell divisions and formed a round and oval shaped hollow thallus with a single layer of cells. In the second type many cells underwent one or two cell divisions (occasionally no division) and soon matured and discharged many motile spores, which on germination grew into normal plantlets. In the third type some cells divided irregularly to form a mass of callus-like cells (exceptE. prolifera). Culture medium supplemented with either mannitol, sorbitol, dextrose, saccharose or NaCl at higher concentrations (> 0.4 M) inhibited cell division and further differentiation in all species. author for correspondence     

Isolation of protoplasts and ion channel recording of plasma membrane patches and whole-cell recordings of the marine alga, <Emphasis Type="Italic">Ulva pertusa</Emphasis> (Chlorophyta)

Whole-cell patch-clamp techniques were used to study ion channels of a marine alga. High quality protoplasts suitable for electrophysiological studies were isolated from the green marine alga, Ulva pertusa, using enzyme mixtures consisting of cellulase and abalone power and identified by calcofluor fluorescence. The vitality of protoplasts varied depending on the alga growth stage, and those isolated from younger tissue in March maintained a high vitality with high sealing success rate compared with protoplasts isolated from mature or non-growing plants in August or November. In the whole-cell configuration, large inward currents were elicited by negative voltage pulses. The voltage-dependent component was predominantly carried by Cl⁻, as confirmed by the use of the Cl⁻ channel inhibitor DIDS and reversal potential of current-voltage plots. This evidence suggests that hyperpolarization-activated Cl⁻ permeable channels are responsible for the influx of Cl⁻ into U. pertusa cells. Voltage-dependent outward currents were also recorded in several protoplasts, and their properties need further investigation.     

Electrofusion of protoplasts from celery (Apium graveolens L.) with protoplasts from the filamentous fungus Aspergillus nidulans

A method was developed for electrofusion of higher-plant protoplasts from celery and protoplasts from the filamentous fungus Aspergillus nidulans. Initially, methods for the fusion of protoplasts from ecch species were determined individually and, subsequently, electrical parameters for fusion between the species were determined. Pronase-E treatment and the presence of calcium ions markedly increased celery protoplast stability under the electrical conditions required and increased fusion frequency with A. nidulans protoplasts. A reduction in protoplast viability was observed after electrofusion but the majority of the protoplasts remained viable over a 24-h incubation period. A small decline in protoplast respiration rate occurred during incubation but those celery protoplasts fused with A. nidulans protoplasts showed elevated respiration rates for 3 h after electrofusion.Abbreviations AC alternating current - DC direct current     

Production and analysis of asymmetric hybrid plants between monocotyledon (Oryza sativa L.) and dicotyledon (Daucus carota L.)

Asymmetric hybrid plants were obtained from fused protoplasts of a monocotyledon (Oryza sativa L.) and a dicotyledon (Daucus carota L.). X-ray-irradiated protoplasts isolated from a cytoplasmic malesterile (cms) carrot suspension culture were fused with iodoacetoamide-treated protoplasts isolated from a 5-methyltryptophan (5MT)-resistant rice suspension culture by electrofusion. The complementary recovered cells divided and formed colonies, which were then cultivated on regeneration medium supplemented with 25mg/l 5MT to eliminate any escaped carrot cells. Somatic hybrids were regenerated from 5 of the 5MT-resistant colonies. The morphologies of most of the regenerated plants closely resembled that of the parental carrot plants. A cytological analysis of callus cultures induced from these plants indicated that most of the cells possessed 20–22 chromosomes and were resistant to 5MT. An isozyme analysis revealed that several regenerated plants had the peroxidase isozyme patterns of both parents. A Southern hybridization analysis with non-radioactively labelled DNA fragments of the rgp1 gene showed that regenerated plants had hybridizing bands from both rice and carrot. Chloroplast (cp) and mitochondrial (mt) DNAs were also analyzed by Southern hybridization by using several probes. CpDNA patterns of the regenerated plants were indistinguishable from those of the carrot parent. However 1 of the regenerated plants had a novel band pattern of mtDNA that was not detected in either of the parents, indicating a possible recombination of mitochondrial genomes.     

Regeneration of interspecific somatic hybrids between Helianthus annuus L. and Helianthus maximiliani (Schrader) via protoplast electrofusion

Helianthus maximiliani is one of the wild Helianthus species with the genes for resistance to many pathogens including Sclerotinia sclerotiorum. Unfortunately, a transfer of disease resistance genes from this species into the cultivated sunflower is limited by its poor crossability with the cultivated sunflower and sterility of interspecific hybrids. To overcome this problem, mesophyll protoplasts of Sclerotinia sclerotiorum-resistant clone of H. maximiliani were electrically fused with etiolated hypocotyl protoplasts of the cultivated sunflower inbred line PH-BC₁-91A. Fusion products were embedded in agarose droplets and subjected to different regeneration protocols. Developed microcalluses were released from the agarose and transferred into solid media. Shoot regeneration was achieved by culture of calluses on regeneration medium containing 2.2 mg l⁻¹ BAP and 0.01 mg l⁻¹ NAA after the treatment with a high concentration of 2,4 D for a limited period of time. A morphological and RAPD analysis confirmed a hybrid nature of the regenerated plants.     

Regeneration of plants from Ipomoea cairica L. protoplasts and production of somatic hybrids between I. cairica L. and sweetpotato, I. batatas (L.) Lam.

Plants were regenerated from mesophyll protoplasts of Ipomoea cairica L., a wild relative of sweetpotato (Ipomoea batatas (L.) Lam.), and somatic hybrids between I. cairica L. and sweetpotato cv. Xushu 18 were obtained by PEG-mediated method. I. cairica L. protoplasts were isolated from the leaves of in vitro grown plants and cultured in a modified MS medium containing 0.05 mg l⁻¹ 2,4-D and 0.5 mg l⁻¹ kinetin. Nine weeks after plating, the obtained small calluses up to about 2 mm in diameter were transferred to solid MS medium supplemented with 0.05 mg l⁻¹ 2,4-D and 0.5 mg l⁻¹ kinetin for callus proliferation. Three weeks after transfer, the calluses were transferred to MS medium supplemented with 0–1.0 mg l⁻¹ IAA and 1.0–3.0 mg l⁻¹ BAP and further to hormone-free MS medium for plant regeneration. The frequencies of calluses forming plants ranged from 6.0% to 41.3% based on the different concentrations of IAA and BAP, and 2.0 mg l⁻¹ BAP gave the highest regeneration frequency of protoplast-derived calluses in I. cairica L.. The regenerated plants, when transferred to soil, showed 100% survival. No morphological variations were observed. Mesophyll protoplasts of I. cairica L. were fused with protoplasts isolated from embryogenic suspension cultures of Xushu 18 by PEG-mediated method. The fused products were cultured with the best protoplast culture system of I. cairica L.. Finally, 114 plants were produced from 63 of the 182 calluses derived from the fused protoplasts, and 46 plants of them were confirmed to be somatic hybrids through peroxidase isozyme, RAPD, morphological and cytological analyses.     

Plant regeneration capacity of mesophyll protoplasts from Brassica napus and related species

Protoplasts from a total of thirty-six genotypes of Brassica species – B. napus, B. campestris (syn. B. rapa), B. juncea, and three distant relatives, Orychophragmus violaceus, Isatis indigotica and Xinjiang wild rape – were analysed for shoot regeneration using a feeder culture system. With the exception of B. campestris and Xinjiang wild rape, some genotypes of all the species could regenerate plants with high efficiency (above 20% of isolated calli initiating shoots). Several genotypes with high regeneration ability were elite breeding lines. Culture conditions as well as genotype had a significant impact on shoot regeneration frequency. In particular, silver nitrate added to the regeneration medium at doses of 6 and 30 μM improved shoot regeneration frequency to 25.4% and 52.2% of isolated calli, respectively, compared to 7.3% percent shoot regeneration without silver nitrate in seven responsive genotypes. Addition of silver nitrate to the regeneration medium also induced shoot regeneration in non-responsive genotypes. Intact plants could be obtained within three months from protoplast isolation in the regenerative genotypes using the current culture system. Advantages of mesophyll protoplasts as compared to protoplasts isolated from hypocotyls for genetic manipulation in Brassica species are discussed. This revised version was published online in June 2006 with corrections to the Cover Date.     

Fusion of plant protoplasts: a study using auxotrophic mutants of Nicotiana plumbaginifolia,Viviani

Summary Protoplast fusion studies between various auxotrophic mutants of Nicotiana plumbaginifolia were performed to optimize conditions for PEG-mediated fusion and to identify factors influencing the plant protoplast fusion process. Numerous parameters in the isolation, culture, and fusion of protoplasts were tested, and established fusion protocols were compared. Fusion rates, calculated on the basis of colony growth on selection medium (genetic complementation), ranged from 10^–4 to 10^–2. Conditions that allow rapid and reproducible fusions at the highest rates were established. Particular emphasis was given to fusion of mesophyll-derived protoplasts, for which the ability to regenerate fertile plants from fusion products was shown to be particularly high. Preliminary experiments using electric-field mediated fusion suggest that electrofusion may offer significant advantages over the traditional chemical fusion.     

Asymmetric somatic hybridization between wheat (Triticum aestivum) and Avena sativa L.

Protoplasts from cell suspensions of young-embryo-derived calli, which were nonregenerable for long-term subculture and protoplasts from embryogenic calli with the regeneration capacity of 75% of the same wheat Jinan 177, were mixed as recipient. Protoplasts from embryogenic calli of Avena sativa (with the regeneration capacity of less than 10%) irradiated with UV at an intensity of 300 μW/cm² for 30 s, 1 min, 2 min, 3 min, 5 min were used as the donor. Protoplasts of the recipient and the donor were fused by PEG method. Many calli and normal green plants were regenerated at high frequency, and were verified as somatic hybrids by chromosome counting, isozyme, 5S rDNA spacer sequence analysis and GISH (genomic in situ hybridization). Fusion combination between protoplasts either from the cell suspensions or from the calli and UV-treated Avena sativa protoplasts could not regenerate green plants.     

Efficient plant regeneration from protoplasts isolated from embryogenic suspension cultures of Cyclamen persicum Mill.

A protocol for plant regeneration from protoplasts has been developed, and then successfully applied to different genotypes of Cyclamen persicum Mill. Protoplasts were isolated from embryogenic suspension cultures by enzymatic digestion in 2% cellulase R10 and 0.5% macerozyme R10. Yields obtained varied between 1 and 5 × 10⁵ protoplasts per gram fresh mass depending on the genotype. Protoplasts were immobilized in alginate films, which promoted proper cell wall regeneration. The highest cell division frequencies were found in modified Kao and Michayluk (1975, Planta 126:105–110) medium containing the same types and concentrations of plant growth regulators that were applied for suspension culture (2.0 mg l⁻¹ 2,4-dichlorophenoxyacetic acid and 0.8 mg l⁻¹ 6-(γ,γ-dimethylallylamino)purine). Cell division was recorded for all 11 tested genotypes in frequencies of up to 12% and 18% after 7 and 14 days, respectively. However, cell division frequency varied strongly between different genotypes. After 4–6 weeks calluses were released from the alginate films and further cultured on hormone-containing medium for continued growth or transferred to hormone-free medium for regeneration of somatic embryos. Plant regeneration via somatic embryogenesis succeeded in 9 out of the 11 genotypes under investigation. Up to now protoplast-derived plants from four genotypes have been successfully transferred to soil.     

Regeneration of intergeneric somatic hybrid plants between Lycopersicon esculentum and Solanum muricatum

Summary Mesophyll protoplasts of tomato (Lycopersicon esculentum) and pepino (Solanum muricatum) were fused by using an electrofusion method and cultured in modified MS medium supplemented with naphthaleneacetic acid and kinetin, in which only pepino and somatic hybrid protoplasts could divide. Somatic hybrid plants showing intermediate characteristics in morphology were regenerated from the calli exhibiting vigorous growth in contrast with those of pepino. The hybrid nature of these plants was confirmed by cytological observation and biochemical analyses of phosphoglucomutase isozymes and the fraction-1-protein. The regenerated somatic hybrids grew to flowering stage and set fruits.     

The hydraulic conductivity as a criterion for the membrane integrity of protoplasts fused by an electric field pulse

The hydraulic conductivity of the membrane, Lp, of fused plant protoplasts was measured and compared to that for unfused cells, in order to identify possible changes in membrane properties resulting from the fusion process. Fusion was achieved by an electric field pulse which induced breakdown in the membranes of protoplasts in close contact. Close membrane contact was established by dielectrophoresis. In some experiments pronase was added during field application; pronase stabilizes protoplasts against high field pulses and long exposure times to the field. The Lp-values were obtained from the shrinking and swelling kinetics in response to osmotic stress. The Lp-values of fused mesophyll cell protoplasts of Avena sativa L. and of mesophyll and guard cell protoplasts of Vicia faba L. were found to be 1.9±0.9·10^-6, 3.2±2.2·10^-6, and 0.8±0.7·10^-6 cm·bar^-1·s^-1, respectively. Within the limits of error, no changes in the Lp-values of fused protoplasts could be detected in comparison to unfused protoplasts. The Lp-values are in the range of those reported for walled cells of higher plants, as revealed by the pressure probe.Abbreviations GCP guard cell protoplast - Lp hydraulic conductivity - MCP mesophyll cell protoplast     

Electrofusion of giant protoplasts of Pleurotus cornucopiae

Summary Giant protoplasts of Pleurotus cornucopiae were fused, using the glass microelectrode electrofusion technque; the percentage fusion achieved was 70%. To induce fusion, Ca²⁺ was necessary, a 10 mM concentration giving the best result. Polyethylene glycol 4000 (PEG) promoted fusion but also increased the adhesion of protoplasts, which caused them to be irreversibly attached to the electrodes. Fusion was always completed within 1 min after a single electrical pulse had been applied. The fused protoplast was isolated with a glass micropipette and was found to regenerate into a colony.     

Asymmetric protoplast fusion between sweet potato and its relatives,and plant regeneration

Experiments were conducted to asymmetrically fuse protoplasts from sweet potato (Ipomoea batatas L. Lam.) and its wild relativesI. trifida Don. andI. lacunosa L. Protoplasts of sweet potato were treated with iodoacetamide, whereas those ofI. trifida Don. andI. lacunosa L. were irradiated with X-rays. The asymmetric protoplast fusion was carried out by the electrofusion method and by polyethylene glycol treatment. Electrically-fused protoplasts initiated cell division, and then formed calli earlier than the polyethylene glycol-fused protoplasts. Plant regeneration occurred only in electrofused calli, suggesting that polyethylene glycol had some toxic effect on plant regeneration ability. Analysis of peroxidase isozymes confirmed the interspecific hybrid characteristics of both the fusion-derived calli and regenerated plants.     

Comparative effects of fusion facilitators on electrofusion attributes of N. tabacum mesophyll protoplasts

Mesophyll protoplasts isolated from in vitro-grown Nicotiana tabacum L. shoots were subjected to electrofusion.Dielectrophoresis was induced by an AC field of 50 V cm^-1 inter-electrode distance and 0.5 MHz oscillation frequency. Fusion was effected by two 0.7 kV cm^-1 DC pulses, each of 50 s duration, applied within one second of each other. Various chemical treatments were tested for their effects on dielectrophoresis efficiencies (percentages of protoplasts that made contact with at least one other protoplast under the AC field), fusion efficiencies (percentages of protoplasts participating in fusion events), cell lysis (percentages of protoplasts bursting during the electrofusion processes), overall viabilities of fusion products 24 h post-fusion and overall plating efficiencies 7 d post-fusion (percentages of fusion-derived cells that had undergone division). The various attributes assessed on the electrofusion of protoplasts in the control treatment, 10% mannitol, differed considerably for experiments carried out on different days. Relative to the control treatment, only the Ca²⁺ treatments, and to a lesser extent lipase treatment reduced dielectrophoresis efficiencies. Polyamines, cytochalasins and Ca²⁺ treatments significantly reduced cell lysis percentages. All electrofusion facilitators tested (except for spermine at 150 mg l^-1, the cytochalasins B and D, and Ca²⁺ treatments) increased fusion efficiencies to more than 1.5 times those obtained with the standard 10% mannitol electrofusion medium. Ca²⁺ treatments increased overall viabilities of fusion products by more than 1.5 times. With the exception of the prostaglandins, lecithin and CaCl₂ treatments, overall plating efficiencies were reduced by treatment of protoplasts with fusion facilitators. Substantial increases in overall plating efficiencies over those observed in the control treatment were obtained using prostaglandin F_2a, lecithin and CaCl₂.2H₂O treatments. The implications of the results are discussed.Abbreviations AC alternating current, approx.-approximately - BA benzylaminopurine, cv.-cultivar - DC direct current, diam.-diameter - FDA fluorescein diacetate - MS Murashige & Skoog (1962) - NAA napthaleneacetic acid - PCM protoplast culture medium - PIM protoplast isolation medium - PPM protoplast purification medium - rpm revolutions per minute - SD(n) standard deviation of a variate - SEM standard error of the mean     

Comparison of cell wall regeneration on maize protoplasts isolated from leaf tissue and suspension cultured cells

Summary The cell wall regeneration on protoplasts derived from maize mesophyll cells was compared with wall regeneration on protoplasts derived from suspension cultured cells using light microscopy, transmission electron microscopy, and mass spectrometry. The time course of cell wall regeneration has shown that the mesophyll protoplasts regenerated walls much slower than the protoplasts derived from cultured cells. Moreover, cell wall materials on the mesophyll protoplasts were often unevenly distributed. Electron microscopy has further demonstrated that the mesophyll protoplasts have less organized and compact walls than the protoplasts from cultured cells. Chemical analysis revealed that the mesophyll protoplasts had a lower ratio ofβ-(1–3)-glucan toβ-(1–4)-glucan than protoplasts from cultured cells. The significance of these results for the viability and development of protoplasts in culture is discussed. National Research Council of Canada paper no. 32458.     

Morphological and molecular characterization of fertile tetraploid somatic hybrids produced by protoplast electrofusion and PEG-induced fusion between Lycopersicon esculentum Mill. and Lycopersicon peruvianum Mill.

Summary Mesophyl protoplasts of two genotypes of cultivated tomato (Lycopersicon esculentum Mill.) and one of its wild relative species (Lycopersicon peruvianum Mill.) were fused by using electrofusion and polyethyleneglycol-induced fusion. Forty-three fertile tetraploid somatic hybrid plants, each deriving from separate calli, were recovered from both fusion procedures. Electrofusion appeared more efficient than chemical fusion for the production of somatic hybrids. These plants appeared morphologically similar, whatever the fusion procedure and tomato genotype. They had intermediate leaf, inflorescence, and flower morphology. After self-pollination, the hybrids set fruit of intermediate size and color. The hybrid nature of these plants was confirmed by isoelectric focusing of the Rubisco small subunits used as nuclear markers. L. esculentum and L. peruvianum were distinguished by means of two chloroplast markers: CF1-ATPase subunit as analyzed by isoelectro-focusing and ct DNA restriction patterns. All hybrids displayed both ct markers of only one parent with no biased transmission. Mitochondrial (mt) DNAs were prepared from flower buds by using miniaturized CsCl gradients. Preliminary analysis indicated that mt genomes from the hybrids all differed from those of both parents. mt DNA Sall restriction enzyme analysis revealed that all but two hybrids contained one novel fragment of 13.5 kb. Gene mapping experiments showed that the mt apocytochrome b and ATPase subunit 9 homologies in the somatic hybrid mt DNA resembled L. esculentum and L. peruvianum, respectively; the mt nad5 probe distinguished at least four distinct patterns in the hybrids. These results indicated that mt DNA rearrangements involving intergenomic recombinations occurred through protoplast fusion. A greater mt DNA polymorphism was induced with chemical fusion than with electrofusion.     

Production of plants resistant to <Emphasis Type="Italic">Alternaria carthami</Emphasis> via organogenesis and somatic embryogenesis of safflower cv. NARI-6 treated with fungal culture filtrates

The present study describes a system for efficient plant regeneration via organogenesis and somatic embryogenesis of safflower (Carthamus tinctorius L.) cv. NARI-6 in fungal culture filtrates (FCF)-treated cultures. FCF was prepared by culturing Alternaria carthami fungal mycelia in selection medium for host-specific toxin production. Cotyledon explants cultured on callus induction medium with different levels of FCF (10–50%) produced embryogenic callus. In organogenesis, 42.2% microshoots formed directly from embryogenic callus tissues in plant regeneration medium with 40% FCF. Isolated embryogenic callus cultured on embryo induction medium containing 40% FCF induced 50.2% somatic embryogenesis. Embryo germination percentage was decreased from 64.5 to 28 in embryo maturation medium containing 40% FCF. However, nine plantlets from organogenesis and 24 plantlets from somatic embryogenesis were selected as FCF-tolerant. Alternaria carthami fungal spores (5 × 10⁵ spores/ml) sprayed on the leaves of FCF-tolerant plants showed enhanced survival rate over control plants, which plants were more susceptible to fungal attack. The number of leaf spot lesions per leaf was decreased from 3.4 to 0.9 and their lesion length was also reduced from 2.9 to 0.7 mm in organogenic derived FCF-tolerant plants over control. In somatic embryo derived FCF-tolerant plants, the number of lesions was decreased from 3.1 to 0.4 and the lesion size was also reduced to 2.7–0.5 mm when compared to the control. This study also examined antioxidant enzyme activity in FCF-tolerant plants. Catalase (CAT) activity was slightly decreased whereas peroxidase (POD) activity was increased to a maximum of 42% (0.19 μmol min⁻¹ mg⁻¹ protein) from organogenesis and 47% (0.23 μmol min⁻¹ mg⁻¹ protein) from embryogenesis in FCF-tolerant plants. Superoxide dismutase (SOD) activity was also increased to 17% (149 U mg⁻¹ protein) and 19.5% (145 U mg⁻¹ protein) in FCF-tolerant plants derived from organogenesis and somatic embryogenesis when compared with control plants.     

Efficient isolation, culture and regeneration of Lotus corniculatus protoplasts

This paper reports an improved protocol for isolation, culture and regeneration of Lotus corniculatus protoplasts. A range of parameters which influence the isolation of L. corniculatus protoplasts were investigated, i.e., enzyme combination, tissue type, incubation period and osmolarity level. Of three enzyme combinations tested, the highest yield of viable protoplasts was achieved with the combination of 2% Cellulase Onozuka RS, 1% Macerozyme R-10, 0.5% Driselase and 0.2% Pectolyase. The use of etiolated cotyledon tissue as a source for protoplast isolation proved vital in obtaining substantially higher protoplast yields than previously reported. Culture of the protoplasts on a nitrocellulose membrane with a Lolium perenne feeder-layer on the sequential series of PEL medium was highly successful in the formation of micro-colonies with plating efficiencies 3–10 times greater than previous studies. Shoot regeneration and intact plants were achieved from 46% of protoplast-derived cell colonies.     

Isolation of cytoplasts from Satsuma mandarin (Citrus unshiu Marc.) and production of alloplasmic hybrid calluses via cytoplast–protoplast fusion

Cytoplasm of Satsuma mandarin (Citrus unshiu Marc.) is known to influence seedlessness. Transfer of cytoplasm to a seedy cultivar could possibly lead to the production of seedless citrus fruits. In the present paper cytoplasts were isolated from cell suspension-derived protoplasts of Satsuma mandarin via ultra-centrifugation in a discontinuous gradient. No nucleus could be detected in the cytoplasts by DAPI (4′, 6-diamidino-2-phenylindole) staining compared with normal protoplasts. The cytoplasts, with high viability and small size, did not divide during solid embedding culture. Cytoplasts of Satsuma mandarin were electrically fused with embryogenic protoplasts of Murcott tangor (C. reticulata × C. sinensis), which led to regeneration of several cell lines. Flow cytometry (FCM) indicated that the cell lines were diploids. Simple sequence repeats (SSR) and cleaved amplified polymorphism sequence (CAPS) showed that the cell lines got their nuclear DNA from the protoplast parent, whereas the cytoplast parent donated the mtDNA, confirming transfer of mtDNA from Satsuma mandarin into Murcott tangor via cytoplast–protoplast fusion though no polymorphism was detected in chloroplast DNA between the fusion partners. This is the first report on isolation and characterization of cytoplasts, together with cytoplast–protoplast fusion in Citrus, which has a potential for citrus cultivar improvement involving cytoplasm transfer via cytoplast–protoplast fusion.