Sequential and distinct roles of the cadherin domain-containing protein Axl2p in cell polarization in yeast cell cycle

Polarization of cell growth along a defined axis is essential for the generation of cell and tissue polarity. In the budding yeast Saccharomyces cerevisiae, Axl2p plays an essential role in polarity-axis determination, or more specifically, axial budding in MATa or alpha cells. Axl2p is a type I membrane glycoprotein containing four cadherin-like motifs in its extracellular domain. However, it is not known when and how Axl2p functions together with other components of the axial landmark, such as Bud3p and Bud4p, to direct axial budding. Here, we show that the recruitment of Axl2p to the bud neck after S/G2 phase of the cell cycle depends on Bud3p and Bud4p. This recruitment is mediated via an interaction between Bud4p and the central region of the Axl2p cytoplasmic tail. This region of Axl2p, together with its N-terminal region and its transmembrane domain, is sufficient for axial budding. In addition, our work demonstrates a previously unappreciated role for Axl2p. Axl2p interacts with Cdc42p and other polarity-establishment proteins, and it regulates septin organization in late G1 independently of its role in polarity-axis determination. Together, these results suggest that Axl2p plays sequential and distinct roles in the regulation of cellular morphogenesis in yeast cell cycle.     

Specific residues of the GDP/GTP exchange factor Bud5p are involved in establishment of the cell type-specific budding pattern in yeast

Cells of the budding yeast undergo oriented cell division by choosing a specific site for growth depending on their cell type. Haploid a and alpha cells bud in an axial pattern whereas diploid a/alpha cells bud in a bipolar pattern. The Ras-like GTPase Rsr1p/Bud1p, its GDP-GTP exchange factor Bud5p, and its GTPase-activating protein Bud2p are essential for selecting the proper site for polarized growth in all cell types. Here we showed that specific residues at the N terminus and the C terminus of Bud5p were important for bipolar budding, while some residues were involved in both axial and bipolar budding. These bipolar-specific mutations of BUD5 disrupted proper localization of Bud5p in diploid a/alpha cells without affecting Bud5p localization in haploid alpha cells. In contrast, Bud5p expressed in the bud5 mutants defective in both budding patterns failed to localize in all cell types. Thus, these results identify specific residues of Bud5p that are likely to be involved in direct interaction with spatial landmarks, which recruit Bud5p to the proper bud site. Finally, we found a new start codon of BUD5, which extends the open reading frame to 210 bp upstream of the previously estimated start site, thus encoding a polypeptide of 608 amino acid residues. Bud5p with these additional N-terminal residues interacted with Bud8p, a potential bipolar landmark, suggesting that the N-terminal region is necessary for recognition of the spatial cues.     

Bud8p and Bud9p, proteins that may mark the sites for bipolar budding in yeast

The bipolar budding pattern of a/alpha Saccharomyces cerevisiae cells appears to depend on persistent spatial markers in the cell cortex at the two poles of the cell. Previous analysis of mutants with specific defects in bipolar budding identified BUD8 and BUD9 as potentially encoding components of the markers at the poles distal and proximal to the birth scar, respectively. Further genetic analysis reported here supports this hypothesis. Mutants deleted for BUD8 or BUD9 grow normally but bud exclusively from the proximal and distal poles, respectively, and the double-mutant phenotype suggests that the bipolar budding pathway has been totally disabled. Moreover, overexpression of these genes can cause either an increased bias for budding at the distal (BUD8) or proximal (BUD9) pole or a randomization of bud position, depending on the level of expression. The structures and localizations of Bud8p and Bud9p are also consistent with their postulated roles as cortical markers. Both proteins appear to be integral membrane proteins of the plasma membrane, and they have very similar overall structures, with long N-terminal domains that are both N- and O-glycosylated followed by a pair of putative transmembrane domains surrounding a short hydrophilic domain that is presumably cytoplasmic. The putative transmembrane and cytoplasmic domains of the two proteins are very similar in sequence. When Bud8p and Bud9p were localized by immunofluorescence and tagging with GFP, each protein was found predominantly in the expected location, with Bud8p at presumptive bud sites, bud tips, and the distal poles of daughter cells and Bud9p at the necks of large-budded cells and the proximal poles of daughter cells. Bud8p localized approximately normally in several mutants in which daughter cells are competent to form their first buds at the distal pole, but it was not detected in a bni1 mutant, in which such distal-pole budding is lost. Surprisingly, Bud8p localization to the presumptive bud site and bud tip also depends on actin but is independent of the septins.     

The BUD4 protein of yeast, required for axial budding, is localized to the mother/BUD neck in a cell cycle-dependent manner

A and alpha cells of the yeast Saccharomyces cerevisiae exhibit an axial budding pattern, whereas a/alpha diploid cells exhibit a bipolar pattern. Mutations in BUD3, BUD4, and AXL1 cause a and alpha cells to exhibit the bipolar pattern, indicating that these genes are necessary to specify the axial budding pattern (Chant, J., and I. Herskowitz. 1991. Cell. 65:1203-1212; Fujita, A., C. Oka, Y. Arikawa, T. Katagi, A. Tonouchi, S. Kuhara, and Y. Misumi. 1994. Nature (Lond.). 372:567-570). We cloned and sequenced BUD4, which codes for a large, novel protein (Bud4p) with a potential GTP-binding motif. Bud4p is expressed and localized to the mother/bud neck in all cell types. Most mitotic cells contain two apparent rings of Bud4 immunoreactive staining, as observed for Bud3p (Chant, J., M. Mischke, E. Mitchell, I. Herskowitz, and J.R. Pringle. 1995. J. Cell Biol. 129: 767-778). Early G1 cells contain a single ring of Bud4p immunoreactive staining, whereas cells at START and in S phase lack these rings. The level of Bud4p is also regulated in a cell cycle-dependent manner. Bud4p is inefficiently localized in bud3 mutants and after a temperature shift of a temperature-sensitive mutant, cdc12, defective in the neck filaments. These observations suggest that Bud4p and Bud3p cooperate to recognize a spatial landmark (the neck filaments) during mitosis and support the hypothesis that they subsequently become a landmark for establishing the axial budding pattern in G1.     

Role of Bud3p in producing the axial budding pattern of yeast

Yeast cells can select bud sites in either of two distinct spatial patterns. a cells and alpha cells typically bud in an axial pattern, in which both mother and daughter cells form new buds adjacent to the preceding division site. In contrast, a/alpha cells typically bud in a bipolar pattern, in which new buds can form at either pole of the cell. The BUD3 gene is specifically required for the axial pattern of budding: mutations of BUD3 (including a deletion) affect the axial pattern but not the bipolar pattern. The sequence of BUD3 predicts a product (Bud3p) of 1635 amino acids with no strong or instructive similarities to previously known proteins. However, immunofluorescence localization of Bud3p has revealed that it assembles in an apparent double ring encircling the mother-bud neck shortly after the mitotic spindle forms. The Bud3p structure at the neck persists until cytokinesis, when it splits to yield a single ring of Bud3p marking the division site on each of the two progeny cells. These single rings remain for much of the ensuing unbudded phase and then disassemble. The Bud3p rings are indistinguishable from those of the neck filament- associated proteins (Cdc3p, Cdc10p, Cdc11p, and Cdc12p), except that the latter proteins assemble before bud emergence and remain in place for the duration of the cell cycle. Upon shift of a temperature- sensitive cdc12 mutant to restrictive temperature, localization of both Bud3p and the neck filament-associated proteins is rapidly lost. In addition, a haploid cdc11 mutant loses its axial-budding pattern upon shift to restrictive temperature. Taken together, the data suggest that Bud3p and the neck filaments are linked in a cycle in which each controls the position of the other's assembly: Bud3p assembles onto the neck filaments in one cell cycle to mark the site for axial budding (including assembly of the new ring of neck filaments) in the next cell cycle. As the expression and localization of Bud3p are similar in a, alpha, and a/alpha cells, additional regulation must exist such that Bud3p restricts the position of bud formation in a and alpha cells but not in a/alpha cells.     

The roles of bud-site-selection proteins during haploid invasive growth in yeast

In haploid strains of Saccharomyces cerevisiae, glucose depletion causes invasive growth, a foraging response that requires a change in budding pattern from axial to unipolar-distal. To begin to address how glucose influences budding pattern in the haploid cell, we examined the roles of bud-site-selection proteins in invasive growth. We found that proteins required for bipolar budding in diploid cells were required for haploid invasive growth. In particular, the Bud8p protein, which marks and directs bud emergence to the distal pole of diploid cells, was localized to the distal pole of haploid cells. In response to glucose limitation, Bud8p was required for the localization of the incipient bud site marker Bud2p to the distal pole. Three of the four known proteins required for axial budding, Bud3p, Bud4p, and Axl2p, were expressed and localized appropriately in glucose-limiting conditions. However, a fourth axial budding determinant, Axl1p, was absent in filamentous cells, and its abundance was controlled by glucose availability and the protein kinase Snf1p. In the bud8 mutant in glucose-limiting conditions, apical growth and bud site selection were uncoupled processes. Finally, we report that diploid cells starved for glucose also initiate the filamentous growth response.     

Interactions among Rax1p, Rax2p, Bud8p, and Bud9p in marking cortical sites for bipolar bud-site selection in yeast

In the budding yeast Saccharomyces cerevisiae, selection of the bud site determines the axis of polarized cell growth and eventual oriented cell division. Bud sites are selected in specific patterns depending on cell type. These patterns appear to depend on distinct types of marker proteins in the cell cortex; in particular, the bipolar budding of diploid cells depends on persistent landmarks at the birth-scar-distal and -proximal poles that involve the proteins Bud8p and Bud9p, respectively. Rax1p and Rax2p also appear to function specifically in bipolar budding, and we report here a further characterization of these proteins and of their interactions with Bud8p and Bud9p. Rax1p and Rax2p both appear to be integral membrane proteins. Although commonly used programs predict different topologies for Rax2p, glycosylation studies indicate that it has a type I orientation, with its long N-terminal domain in the extracytoplasmic space. Analysis of rax1 and rax2 mutant budding patterns indicates that both proteins are involved in selecting bud sites at both the distal and proximal poles of daughter cells as well as near previously used division sites on mother cells. Consistent with this, GFP-tagged Rax1p and Rax2p were both observed at the distal pole as well as at the division site on both mother and daughter cells; localization to the division sites was persistent through multiple cell cycles. Localization of Rax1p and Rax2p was interdependent, and biochemical studies showed that these proteins could be copurified from yeast. Bud8p and Bud9p could also be copurified with Rax1p, and localization studies provided further evidence of interactions. Localization of Rax1p and Rax2p to the bud tip and distal pole depended on Bud8p, and normal localization of Bud8p was partially dependent on Rax1p and Rax2p. Although localization of Rax1p and Rax2p to the division site did not appear to depend on Bud9p, normal localization of Bud9p appeared largely or entirely dependent on Rax1p and Rax2p. Taken together, the results indicate that Rax1p and Rax2p interact closely with each other and with Bud8p and Bud9p in the establishment and/or maintenance of the cortical landmarks for bipolar budding.     

Subcellular localization of the interaction of bipolar landmarks Bud8p and Bud9p with Rax2p in Saccharomyces cerevisiae diploid cells

In Saccharomyces cerevisiae, the bud site selection of diploid cells is regulated by at least four persistent landmarks, Bud8p, Bud9p, Rax1p, and Rax2p. Bud8p and Bud9p are essential for the establishment of bipolar budding and localize mainly to the distal and the proximal poles, respectively. Their subcellular localizations are regulated through interaction with Rax1p/Rax2p. We investigated when and where Bud8p and Bud9p physically interact with Rax2p in vivo using a split-GFP method. GFP fluorescence showed that Bud8p physically interacted with Rax2p at the proximal or distal pole in unbudded cells; a physical interaction was also observed at the opposite pole to the growing bud in mother cells with a large-size bud. Bud9p physically interacted with Rax2p at the birth scar in budded mother cells. These observations suggest that the interaction of Rax2p with Bud8p and Bud9p may contribute to the translocation of bipolar landmarks to the correct sites.     

Aip3p/Bud6p, a yeast actin-interacting protein that is involved in morphogenesis and the selection of bipolar budding sites.

A search for Saccharomyces cerevisiae proteins that interact with actin in the two-hybrid system and a screen for mutants that affect the bipolar budding pattern identified the same gene, AIP3/BUD6. This gene is not essential for mitotic growth but is necessary for normal morphogenesis. MATa/alpha daughter cells lacking Aip3p place their first buds normally at their distal poles but choose random sites for budding in subsequent cell cycles. This suggests that actin and associated proteins are involved in placing the bipolar positional marker at the division site but not at the distal tip of the daughter cell. In addition, although aip3 mutant cells are not obviously defective in the initial polarization of the cytoskeleton at the time of bud emergence, they appear to lose cytoskeletal polarity as the bud enlarges, resulting in the formation of cells that are larger and rounder than normal. aip3 mutant cells also show inefficient nuclear migration and nuclear division, defects in the organization of the secretory system, and abnormal septation, all defects that presumably reflect the involvement of Aip3p in the organization and/or function of the actin cytoskeleton. The sequence of Aip3p is novel but contains a predicted coiled-coil domain near its C terminus that may mediate the observed homo-oligomerization of the protein. Aip3p shows a distinctive localization pattern that correlates well with its likely sites of action: it appears at the presumptive bud site prior to bud emergence, remains near the tips of small bund, and forms a ring (or pair of rings) in the mother-bud neck that is detectable early in the cell cycle but becomes more prominent prior to cytokinesis. Surprisingly, the localization of Aip3p does not appear to require either polarized actin or the septin proteins of the neck filaments.     

Rax1, a protein required for the establishment of the bipolar budding pattern in yeast

In Saccharomyces cerevisiae, cell type determines two distinct spatial budding patterns. Haploid cells exhibit an axial pattern, whereas diploid cells exhibit a bipolar pattern. Axl1, a member of the insulin-degrading enzyme (IDE) family, is the key morphological determinant for the haploid axial pattern. Here we identified a novel gene, RAX1, specifically required for the bipolar budding pattern. Loss of RAX1 alters the bipolar pattern of axl1 haploids resulting in reversion to the axial pattern, and also alters the bipolar patterns of bud3 and bud4 haploids. However, bud10 rax1 haploids exhibit a random budding pattern, suggesting Bud10 acts as the key proximal landmark in axial budding. Rax1 is required for the localization of Bud8, the distal bipolar budding landmark. Interestingly, Rax1 contains a C-terminal domain possessing some similarity to insulin-related peptides. Our results suggest that Rax1 is necessary for the establishment of the bipolar budding landmark.     

Iqg1p links spatial and secretion landmarks to polarity and cytokinesis

Cytokinesis requires the polarization of the actin cytoskeleton, the secretion machinery, and the correct positioning of the division axis. Budding yeast cells commit to their cytokinesis plane by choosing a bud site and polarizing their growth. Iqg1p (Cyk1p) was previously implicated in cytokinesis (Epp and Chant, 1997; Lippincott and Li, 1998; Osman and Cerione, 1998), as well as in the establishment of polarity and protein trafficking (Osman and Cerione, 1998). To better understand how Iqg1p influences these processes, we performed a two-hybrid screen and identified the spatial landmark Bud4p as a binding partner. Iqg1p can be coimmunoprecipitated with Bud4p, and Bud4p requires Iqg1p for its proper localization. Iqg1p also appears to specify axial bud-site selection and mediates the proper localization of the septin, Cdc12p, as well as binds and helps localize the secretion landmark, Sec3p. The double mutants iqg1Deltasec3Delta and bud4Deltasec3Delta display defects in polarity, budding pattern and cytokinesis, and electron microscopic studies reveal that these cells have aberrant septal deposition. Taken together, these findings suggest that Iqg1p recruits landmark proteins to form a targeting patch that coordinates axial budding with cytokinesis.     

A localized GTPase exchange factor, Bud5, determines the orientation of division axes in yeast

GTPases are widespread in directing cytoskeletal rearrangements and affecting cellular organization. How they do so is not well understood. Yeast cells divide by budding, which occurs in two spatially programmed patterns, axial or bipolar [1-3]. Cytoskeletal polarization to form a bud is governed by the Ras-like GTPase, Bud1/Rsr1, in response to cortical landmarks. Bud1 is uniformly distributed on the plasma membrane, so presumably its regulators, Bud5 GTPase exchange factor and Bud2 GTPase activating protein, impart spatial specificity to Bud1 action [4]. We examined the localizations of Bud5 and Bud2. Both Bud1 regulators associate with cortical landmarks designating former division sites. In haploids, Bud5 forms double rings that encircle the mother-bud neck and split upon cytokinesis so that each progeny cell inherits Bud5 at the axial division remnant. Recruitment of Bud5 into these structures depends on known axial landmark components. In cells undergoing bipolar budding, Bud5 associates with multiple sites, in response to the bipolar landmarks. Like Bud5, Bud2 associates with the axial division remnant, but rather than being inherited, Bud2 transiently associates with the remnant in late G1, before condensing into a patch at the incipient bud site. The relative timing of Bud5 and Bud2 localizations suggests that both regulators contribute to the spatially specific control of Bud1 GTPase.     

Protein-O-glycosylation in yeast: protein-specific mannosyltransferases

S.cerevisiae contains at least six genes (PMT1–6) fordolicholphosphate-D-mannose: protein-O-D-mannosyltransferases.The in vivo mannosylation of seven O-mannosylated yeast proteinshas been analyzed in a number of pmt mutants. The results clearlyindicate that the various protein O-mannosyltransferases havedifferent specificities for protein substrates. Five of theproteins tested (chitinase, a-agglutinin, Kre9p, Bar1p, Pir2p/hsp150)are mainly underglycosylated in pmt1 and pmt2 mutants, wherebyqualitative differences exist among the various proteins. Twoof the O-mannosylated proteins (Ggp1p and Kex2p) are not atall affected in pmt1 and pmt2 mutants but are clearly underglycosylatedwhen PMT4 is mutated. Although the PMT4 gene product is shownto be responsible for O-mannosylating a Ser-rich region of Ggp1pin vivo, a penta-seryl-peptide is not an in vitro substratefor this transferase. A PMT3 mutation does affect O-manno-sylationof chitinase only in the genetic background of a pmt1pmt2 doublemutation, indicating that PMT1 and PMT2 can compensate for adeleted PMT3 gene. dolichol-phosphate PMT gene family protein glycosylation S. cerevisiae     

Identification of an amphipathic helix important for the formation of ectopic septin spirals and axial budding in yeast axial landmark protein Bud3p

Correct positioning of polarity axis in response to internal or external cues is central to cellular morphogenesis and cell fate determination. In the budding yeast Saccharomyces cerevisiae, Bud3p plays a key role in the axial bud-site selection (axial budding) process in which cells assemble the new bud next to the preceding cell division site. Bud3p is thought to act as a component of a spatial landmark. However, it is not clear how Bud3p interacts with other components of the landmark, such as the septins, to control axial budding. Here, we report that overexpression of Bud3p causes the formation of small septin rings (～1 μm in diameter) and arcs aside from previously reported spiral-like septin structures. Bud3p closely associates with the septins in vivo as Bud3p colocalizes with these aberrant septin structures and forms a complex with two septins, Cdc10p and Cdc11p. The interaction of Bud3p with the septins may involve multiple regions of Bud3p including 1-858, 850-1220, and 1221-1636 a.a. since they all target to the bud neck but exhibit different effects on septin organization when overexpressed. In addition, our study reveals that the axial budding function of Bud3p is mediated by the N-terminal region 1-858. This region shares an amphipathic helix (850-858) crucial for bud neck targeting with the middle portion 850-1103 involved in the formation of ectopic septin spirals and rings. Interestingly, the Dbl-homology domain located in 1-858 is dispensable for axial bud-site selection. Our findings suggest that multiple regions of Bud3p ensure efficient targeting of Bud3p to the bud neck in the assembly of the axial landmark and distinct domains of Bud3p are involved in axial bud-site selection and other cellular processes.     

Genetic analysis of the bipolar pattern of bud site selection in the yeast Saccharomyces cerevisiae.

Previous analysis of the bipolar budding pattern of Saccharomyces cerevisiae has suggested that it depends on persistent positional signals that mark the region of the division site and the tip of the distal pole on a newborn daughter cell, as well as each previous division site on a mother cell. In an attempt to identify genes encoding components of these signals or proteins involved in positioning or responding to them, we identified 11 mutants with defects in bipolar but not in axial budding. Five mutants displaying a bipolar budding-specific randomization of budding pattern had mutations in four previously known genes (BUD2, BUD5, SPA2, and BNI1) and one novel gene (BUD6), respectively. As Bud2p and Bud5p are known to be required for both the axial and bipolar budding patterns, the alleles identified here probably encode proteins that have lost their ability to interact with the bipolar positional signals but have retained their ability to interact with the distinct positional signal used in axial budding. The function of Spa2p is not known, but previous work has shown that its intracellular localization is similar to that postulated for the bipolar positional signals. BNI1 was originally identified on the basis of genetic interaction with CDC12, which encodes one of the neck-filament-associated septin proteins, suggesting that these proteins may be involved in positioning the bipolar signals. One mutant with a heterogeneous budding pattern defines a second novel gene (BUD7). Two mutants budding almost exclusively from the proximal pole carry mutations in a fourth novel gene (BUD9). A bud8 bud9 double mutant also buds almost exclusively from the proximal pole, suggesting that Bud9p is involved in positioning the proximal pole signal rather than being itself a component of this signal.     

Subcellular localization of Axl1, the cell type-specific regulator of polarity

Bud-site selection in yeast offers an attractive system for studying cell polarity and asymmetric division. Haploids divide in an axial pattern, whereas diploids divide in a bipolar pattern. AXL1 is expressed in haploids but not diploids, and ectopic expression of AXL1 in diploids converts their bipolar budding pattern to an axial pattern. How Axl1 acts as a switch between the bipolar and axial patterns is not understood. Here we report that Axl1 localizes to the mother-bud neck and division site remnants of haploids. Axl1 is absent from diploids. Axl1 colocalizes with Bud3, Bud4, and Bud10, components of the axial landmark structure. This localization suggests that Axl1 couples the axial landmark with downstream polarity establishment factors. Consistent with such a role, Axl1 associated biochemically with Bud4 and Bud5. Genetic evidence suggests that Axl1 works with Bud3 and Bud4 to promote the activity of the Bud10 membrane protein. Given Axl1's suggested role in morphogenesis and cell fusion during mating, we also examined its localization during this process. Axl1 redistributes independently of the axial landmark to a tight cell surface dot at the tip of each mating projection. These dots are rapidly lost as prezygotes form.     

Morphogenesis beyond Cytokinetic Arrest in Saccharomyces cerevisiae

The budding yeast lyt1 mutation causes cell lysis. We report here that lyt1 is an allele of cdc15, a gene which encodes a protein kinase that functions late in the cell cycle. Neither cdc15-1 nor cdc15-lyt1 strains are able to septate at 37°C, even though they may manage to rebud. Cells lyse after a shmoo-like projection appears at the distal pole of the daughter cell. Actin polarizes towards the distal pole but the septins remain at the mother–daughter neck. This morphogenetic response reflects entry into a new round of the cell cycle: the preference for polarization from the distal pole was lost in bud1 cdc15 double mutants; double cdc15-lyt1 cdc28-4 mutants, defective for START, did not develop apical projections and apical polarization was accompanied by DNA replication. The same phenomena were caused by mutations in the genes CDC14, DBF2, and TEM1, which are functionally related to CDC15. Apical polarization was delayed in cdc15 mutants as compared with budding in control cells and this delay was abolished in a septin mutant. Our results suggest that the delayed M/G1 transition in cdc15 mutants is due to a septin-dependent checkpoint that couples initiation of the cell cycle to the completion of cytokinesis.     

Genetic control of bud site selection in yeast by a set of gene products that constitute a morphogenetic pathway

Yeast cells choose bud sites on their surface in two distinct spatial patterns: axial for a and alpha cells and bipolar for a/alpha cells. We have identified four genes, BUD1-BUD4, necessary for the axial pattern by isolating mutants of alpha cells that do not exhibit this pattern. Mutations in BUD1 (which is the same as the previously identified gene RSR1) or BUD2 lead to a random budding pattern in all cell types; mutations in BUD3 or BUD4 lead to a bipolar pattern in all cell types. These observations indicate the existence of a basal budding pattern, requiring no BUD products, that is random; BUD1 and BUD2 act on this basal pattern to create the bipolar pattern; the further action of BUD3 and BUD4 leads to the axial pattern. These studies thus identify a set of gene products that directs cell morphogenesis to a genetically programmed site.     

Morphogenetic and developmental functions of the Aspergillus nidulans homologues of the yeast bud site selection proteins Bud4 and Axl2

The yeast bud site selection system represents a paradigm for understanding how fungal cells regulate the formation of a polarity axis. In Saccharomyces cerevisiae, Bud4 and Axl2 are components of the axial bud site marker. To address the possibility that these proteins regulate cellular morphogenesis in filamentous fungi, we have characterized homologues of Bud4 and Axl2 in Aspergillus nidulans. Our results show that Bud4 is involved in septum formation in both hyphae and developing conidiophores. Whereas Axl2 appears to have no obvious role in hyphal growth, it is required for the regulation of phialide morphogenesis during conidiation. In particular, Axl2 localizes to the phialide-spore junction, where it appears to promote the recruitment of septins. Furthermore, the developmental regulators BrlA and AbaA control the expression of Axl2. Additional studies indicate that Axl2 is also involved in the regulation of sexual development, not only in A. nidulans, but also in the phylogenetically unrelated fungus Fusarium graminearum. Our results suggest that Axl2 plays a key role in phialide morphogenesis and/or function during conidiation in the aspergilli.