Mapping of transfer regions within incompatibility group HI plasmid R27.

Plasmids of incompatibility group HI are large (greater than 150 kilobases [kb]) and possess an unusual thermosensitive mode of conjugative transfer. R27, the prototype IncHi1 plasmid, encodes resistance to tetracycline via a determinant which is related to transposon Tn10. A restriction endonuclease map of R27 (size, 182 kb) was recently constructed with ApaI, PstI, and XbaI. Transfer genes within R27 were mapped by insertion of Tn5 and Tn7. At least two different regions of the plasmid were concerned with transfer functions. Insertions into either region completely abolished transfer. None of the insertions had any effect on entry exclusion (Eex) of other IncH plasmids. However, a deletion mutant which lacked the Eex function was obtained, allowing us to map the probable site of the gene encoding Eex to one of the two transfer regions. The tetracycline resistance determinant in R27 was located within an 8-kb region between the two main transfer regions. The transfer genes, therefore, are not located together in R27 but are situated in at least two major widely separated transfer regions.     

Structural-functional organization of the incompatibility group P plasmid pBS221

Plasmid pBS221 was physically mapped for restriction endonucleases EcoRI, BamHI, BglII, HindIII. The regions essential for the plasmid existence and participating in replication (oriV trfA*) and mobilization (mob) were cloned. The tet determinant and oriV trfA* regions were localized on the physical map of the plasmid. A DNA sequence homologous to genes of Tn501 mer operon was detected in this plasmid. The studies on homology of plasmids RP4 (IncP alpha), R751 (IncP beta) and pBS221 plasmid suggest that the latter belongs to the IncP beta subgroup.     

Mutagenesis of the Tra1 core region of RK2 by using Tn5: identification of plasmid-specific transfer genes.

The conjugation system of the IncP alpha plasmid RK2/RP4 is encoded by transfer regions designated Tra1, Tra2, and Tra3. The Tra1 core region, cloned on plasmid pDG4 delta 22, consists of the origin of transfer (oriT) and 2.6 kilobases of flanking DNA providing IncP alpha plasmid-specific functions that allow pDG4 delta 22 to be mobilized by the heterologous IncP beta plasmid R751. Tn5 insertions in pDG4 delta 22 define a minimal 2.2-kilobase region required for plasmid-specific transfer of oriT. The Tra1 core contains the traJ and traK genes as well as an 18-kilodalton open reading frame downstream of traJ. The traJ and traK genes were shown to be required for transfer by complementation of inserts within these genes. Genetic evidence for the role of the 18-kilodalton open reading frame in transfer was obtained, although this protein has not been detected in cell lysates. These studies indicate that at least three transfer proteins are involved in plasmid-specific interactions at oriT.     

Excision and integration of degradative pathway genes from TOL plasmid pWW0.

WR211 is a transconjugant resulting from transfer of the 117-kilobase (kb) TOL degradative plasmid pWW0 into Pseudomonas sp. strain B13. The plasmid of this strain, pWW01211, is 78 kb long, having suffered a deletion of 39 kb. We show that WR211 contains the 39 kb that is missing from its plasmid, together with at least an additional 17 kb of pWW0 DNA integrated in another part of the genome, probably the chromosome. The ability of WR211 to grow on the TOL-specific substrate m-toluate is the result of expression of the TOL genes in this alternative location, whereas its inability to grow on m-xylene is caused by insertional mutagenesis by 3 kb of DNA of unknown origin in the xylR gene of this DNA. The resident plasmid pWW01211 plays no part in the degradative phenotype of WR211 since it can be expelled by mating in incompatible IncP9 resistance plasmid R2 or pMG18 without loss of the phenotype. This alternatively located DNA can be rescued back into the R2 and pMG18 plasmids as R2::TOL and pMG18::TOL recombinants by mating out into plasmid-free recipients and selecting for Mtol+ transconjugants. In all cases examined, these plasmids contained the entire R plasmid into which is inserted 59 kb of DNA, made up of 56 kb of pWW0 DNA and the 3-kb xylR insertion. Selection for faster growth on benzoate can lead to precise excision of the 39 kb from the TOL region of an R2::TOL recombinant, leaving a residual and apparently cryptic 17-kb segment of pWW0 DNA in the R plasmid.     

The completely sequenced plasmid pEST4011 contains a novel IncP1 backbone and a catabolic transposon harboring tfd genes for 2,4-dichlorophenoxyacetic acid degradation

The herbicide 2,4-dichlorophenoxyacetic acid (2,4-D)-degrading bacterium Achromobacter xylosoxidans subsp. denitrificans strain EST4002 contains plasmid pEST4011. This plasmid ensures its host a stable 2,4-D(+) phenotype. We determined the complete 76,958-bp nucleotide sequence of pEST4011. This plasmid is a deletion and duplication derivative of pD2M4, the 95-kb highly unstable laboratory ancestor of pEST4011, and was self-generated during different laboratory manipulations performed to increase the stability of the 2,4-D(+) phenotype of the original strain, strain D2M4(pD2M4). The 47,935-bp catabolic region of pEST4011 forms a transposon-like structure with identical copies of the hybrid insertion element IS1071::IS1471 at the two ends. The catabolic regions of pEST4011 and pJP4, the best-studied 2,4-D-degradative plasmid, both contain homologous, tfd-like genes for complete 2,4-D degradation, but they have little sequence similarity other than that. The backbone genes of pEST4011 are most similar to the corresponding genes of broad-host-range self-transmissible IncP1 plasmids. The backbones of the other three IncP1 catabolic plasmids that have been sequenced (the 2,4-D-degradative plasmid pJP4, the haloacetate-catabolic plasmid pUO1, and the atrazine-catabolic plasmid pADP-1) are nearly identical to the backbone of R751, the archetype plasmid of the IncP1 beta subgroup. We show that despite the overall similarity in plasmid organization, the pEST4011 backbone is sufficiently different (51 to 86% amino acid sequence identity between individual backbone genes) from the backbones of members of the three IncP1 subgroups (the alpha, beta, and gamma subgroups) that it belongs to a new IncP1subgroup, the delta subgroup. This conclusion was also supported by a phylogenetic analysis of the trfA2, korA, and traG gene products of different IncP1 plasmids.     

Nucleotide sequence and organization of genes flanking the transfer origin of promiscuous plasmid RP4.

The nucleotide sequence of the relaxase operon and the leader operon which are part of the Tra1 region of the promiscuous plasmid RP4 was determined. These two polycistronic operons are transcribed divergently from an intergenic region of about 360 bp containing the transfer origin and six close-packed genes. A seventh gene completely overlaps another one in a different reading frame. Conjugative DNA transfer proceeds unidirectionally from oriT with the leader operon heading the DNA to be transferred. The traI gene of the relaxase operon includes within its 3' terminal region a promoter controlling the 7.2-kb polycistronic primase operon. Comparative sequence analysis of the closely related IncP plasmid R751 revealed a similarity of 74% at the nucleotide sequence level, indicating that RP4 and R751 have evolved from a common ancestor. The gene organization of relaxase- and leader operons is conserved among the two IncP plasmids. The transfer origins and the genes traJ and traK exhibit greater sequence divergence than the other genes of the corresponding operons. This is conceivable, because traJ and traK are specificity determinants, the products of which can only recognize homologous oriT sequences. Surprisingly, the organization of the IncP relaxase operons resembles that of the virD operon of Agrobacterium tumefaciens plasmid pTiA6 that mediates DNA transfer to plant cells by a process analogous to bacterial conjugation. Furthermore, the IncP TraG proteins and the product of the virD4 gene share extended amino acid sequence similarity, suggesting a functional relationship.     

Conserved regions at the DNA primase locus of IncP alpha and IncP beta plasmids

Genes specifying DNA primases (pri) are common in all IncP plasmids examined so far. These plasmids suppress the thermosensitive character of the Escherichia coli dnaG3 mutation. The mechanism of suppression appears to be identical to that known for RP4 and IncI alpha plasmids. The DNA primases of both these plasmid types can substitute for the dnaG protein in chromosomal DNA replication. The pri genes of the alpha and beta subgroup of IncP plasmids are related to each other as judged from Southern hybridization and immunological data. Extensive DNA and protein sequence homology has been detected although the gene products of the alpha and beta subgroups exhibit substantial differences in size. The arrangement of overlapping genes at the pri locus of IncP alpha plasmids also appears to be present in the IncP beta group.     

Development of a system vector-host in methylotrophic bacteria

Cloning of methylotropic and other Gram negative bacteria's genes was performed using vectors derived from IncP4 plasmids. Plasmids, such s RSF1010 are 8.8 kb in length, have a high copy number and broad host range and can be mobilized efficiently by a number of conjugative plasmids. IncP4 plasmids have relatively few restriction enzyme's targets suitable for cloning. In this paper the construction of versatile and special purpose IncP4 vectors available for cloning DNA into broad range of bacterial species are described. The seria of versatile vectors involves the transposon containing plasmid and two-replicon vectors.In genetic construction of special vector for direct cloning of restriction fragments the genetic regulation elements of Tn 1 were used. On the base of IncP4 replicon special vectors for construction of bank genes (cosmids) and the vectors for cloning of regulation sequence were also constructed.     

Comparative analysis of the structure of incompatibility plasmids N, P and W

Evolutionary relationships of the IncN plasmid R15 and other broad host range plasmids (IncN plasmids N3 and R46, IncP plasmids RP4 and R906, IncW plasmids Sa and R388) were studied by Southern blot hybridization technique. The IncN plasmids were shown to harbour homologous determinants for replication and conjugation. No homology was found between the rep and tra genes in R15 and in the IncW and IncP plasmids, respectively. The second rep region of the N3 plasmid is distinctive from the corresponding determinants in the IncN plasmids. Homology was demonstrated for the plasmid genes that mediate restriction and modification in R15 and N3, mercury resistance in R15 and R906, sulfanilamide resistance in R15, N3, R46, Sa, R388, and R906, streptomycin resistance in R15, R46 and Sa. The latter genes are different from the R906 SmR gene. In addition to the three known mobile elements in the plasmid R15, the fourth one (IS46) that is a part of the transposon Tn2353 was identified in this study. Besides, the third copy of this insertion sequence was found in the N3 plasmid.     

pHH502, a plasmid with IncP and IncI alpha characters, loses the latter by a specific recA-independent deletion event

Plasmid pHH502, of molecular weight 70 X 10(6), determined resistance to tetracycline, chloramphenicol, trimethoprim, sulphonamides and mercuric chloride and was incompatible with members of IncP and IncI alpha. It resembled other plasmids of IncI alpha in the following properties: it determined pili that were morphologically and serologically I alpha pili, whose production was repressed in established plasmid-carrying (R+) cultures; its transfer was equally efficient in liquid or on solid medium; it exerted surface exclusion against other IncI alpha plasmids; it was non-transferable to Proteus. In a reproducible, recA-independent event, pHH502 gave rise to pHH502-1, a plasmid of molecular weight 40 X 10(6), lacking determinants for resistance to tetracycline and chloramphenicol and all detectable IncI alpha characteristics. pHH502-1 was incompatible only with IncP plasmids and resembled other IncP plasmids in determining constitutive production of rigid pili, in its surface exclusion, in transferring at greater frequency on solid than in liquid medium and in being transmissible to Proteus mirabilis. It differed from other IncP plasmids in the morphology and serological type of its pili and in failing to transfer to Pseudomonas aeruginosa or Acinetobacter calcoaceticus. Small numbers of pHH502-1 rigid pili were present on bacteria carrying pHH502. Possible mechanisms for the generation of pHH502 and pHH502-1 are discussed.     

Map of the IncP1beta plasmid pTSA encoding the widespread genes (tsa) for p-toluenesulfonate degradation in Comamonas testosteroni T-2

The catabolic IncP1beta plasmid pTSA from Comamonas testosteroni T-2 was mapped by subtractive analysis of restriction digests, by sequencing outwards from the tsa operon (toluenesulfonate degradation), and by generating overlapping, long-distance-PCR amplification products. The plasmid was estimated to comprise 72 +/- 4 kb. The tsa region was found to be a composite transposon flanked by two IS1071 elements. A cryptic tsa operon was also present in the tsa transposon. Those backbone genes and regions which we sequenced were in the same order as the corresponding genes in resistance plasmid R751, and identities of about 99% were observed. Enrichment cultures with samples from four continents were done to obtain organisms able to utilize p-toluenesulfonate as the sole source of carbon and energy for aerobic growth. Most (15) of the 16 cultures (13 of them isolates) were obtained from contaminated sites and were attributed to three metabolic groups, depending on their metabolism of p-toluenesulfonate. The largest group contained the tsa transposon, usually (six of seven isolates) with negligible differences in sequence from strain T-2.     

The trfA and trfB promoter regions of broad host range plasmid RK2 share common potential regulatory sequences

The positions of the trfA and trfB promoters of broad host range IncP plasmid RK2 (identical to RP1, RP4, R68 and R18 ) were identified by RNA polymerase protection studies, and the nucleotide sequences of the promoter regions determined. A mutation within the trfA promoter sequence is associated with loss of kilD activity. In addition a probable promoter region for the kilB locus was identified. The three promoter regions share common palindromic sequences which may serve as sites for the coordinate regulation of replication and kil functions.     

A small mobilizable IncP group plasmid vector packageable into bacteriophage lambda capsids in vitro

A mobilizable cosmid derivative of an IncP group plasmid was constructed by cloning the oriT region of RK2, a wide host-range plasmid, and the minimal DNA sequence of bacteriophage lambda required for efficient packaging in vitro. This cosmid is 13 kb in size and has unique restriction sites for EcoRI, XhoI, HindIII, and SalI. The XhoI and HindIII sites are within the kanamycin-resistance gene and the SalI site is in the tetracycline-resistance gene. This plasmid was mobilizable from an Escherichia coli donor to a number of diverse gram-negative bacteria at a frequency of 0.8 to 10 per 100 donors. This vector is one of the smallest of all wide host-range cosmids described in the literature. As part of this study, another mobilizable IncP group plasmid vector has also been constructed which, in addition to the sites listed above, has a unique BglII site, but which lacks the packager sequence.     

Determination and in vivo characterization of the basic replicon of natural plasmids of Methylomonas clara

The basic replicon of the endogenous Methylomonas clara plasmid pBE-2 and its derivatives was defined to a region of 2.7 kb by in vivo deletions and conjugative transfer experiments using Escherichia coli-M. clara hybrid plasmids. Origin activity was found to be confined to a maximal length of 1.3 kb. The origin consists of two fragments which can be separated more than 4 kb by the integration of foreign DNA fragments without loss of function. A fragment having a maximum size of 2.1 kb supports in trans replication initiation at the origin. In addition, two incompatibility determinants were revealed, one localized in the origin fragment and the other outside the origin. Incompatibility between two basic replicons of the natural M. clara plasmids can be overcome by the integration of one of them in the compatible IncP plasmid R68-Kms. No homology was found between the plasmid basic replicon and the chromosomal DNA of M. clara.     

DNA segments of the IncX plasmid R485 determining replication and incompatibility with plasmid R6K

The expression of incompatibility properties between the IncX plasmids R6K and R485 of Escherichia coli was examined. For small autonomously replicating derivatives of both plasmid elements, the requirements for incompatibility expression include a functional R485 replicon and an active R6K beta-origin region. Functional R6K alpha and gamma origins are not directly involved in incompatibility expression between R6K and R485. A trans-acting replication system was constructed for plasmid R485. It consists of a 3.2-(kb) DNA fragment of R485 that specifies a product(s) in trans which supports replication from an R485 origin plasmid. A minimal R485 origin region of 591 bp was derived utilizing this trans-acting replication system and the nucleotide sequence of this origin region determined. The most striking feature of the sequence is the presence of six tandem 22-bp nucleotide sequence direct repeats.