Information about the protein secondary structure improves quality of an alignment of protein sequences

All popular algorithms of pair-wise alignment of protein primary structures (e.g. Smith-Waterman (SW), FASTA, BLAST, et al.) utilize only amino acid sequences. The SW-algorithm is the most accurate among them, i.e. it produces alignments that are most similar to the alignments obtained by superposition of protein 3D-structures. But even the SW-algorithm is unable to restore the 3D-based alignment if similarity of amino acid sequences (%id) is below 30%. We have proposed a novel alignment method that explicitly takes into account the secondary structure of the compared proteins. We have shown that it creates significantly more accurate alignments compared to SW-algorithm. In particular, for sequences with %id < 30% the average accuracy of the new method is 58% compared to 35% for SW-algorithm (the accuracy of an algorithmic sequence alignment is the part of restored position of a "golden standard" alignment obtained by superposition of corresponding 3D-structures). The accuracy of the proposed method is approximately identical both for experimental, and for theoretically predicted secondary structures. Thus the method can be applied for alignment of protein sequences even if protein 3D-structure is unknown. The program is available at ftp://194.149.64.196/STRUSWER/.     

TRIAL: a tool for finding distant structural similarities

Finding structural similarities in distantly related proteins can reveal functional relationships that can not be identified using sequence comparison. Given two proteins A and B and threshold ε ?, we develop an algorithm, TRiplet-based Iterative ALignment (TRIAL) for computing the transformation of B that maximizes the number of aligned residues such that the root mean square deviation (RMSD) of the alignment is at most ε ?. Our algorithm is designed with the specific goal of effectively handling proteins with low similarity in primary structure, where existing algorithms perform particularly poorly. Experiments show that our method outperforms existing methods. TRIAL alignment brings the secondary structures of distantly related proteins to similar orientations. It also finds larger number of secondary structure matches at lower RMSD values and increased overall alignment lengths. Its classification accuracy is up to 63 percent better than other methods, including CE and DALI. TRIAL successfully aligns 83 percent of the residues from the smaller protein in reasonable time while other methods align only 29 to 65 percent of the residues for the same set of proteins.     

Template-based protein structure modeling using the RaptorX web server

A key challenge of modern biology is to uncover the functional role of the protein entities that compose cellular proteomes. To this end, the availability of reliable three-dimensional atomic models of proteins is often crucial. This protocol presents a community-wide web-based method using RaptorX (http://raptorx.uchicago.edu/) for protein secondary structure prediction, template-based tertiary structure modeling, alignment quality assessment and sophisticated probabilistic alignment sampling. RaptorX distinguishes itself from other servers by the quality of the alignment between a target sequence and one or multiple distantly related template proteins (especially those with sparse sequence profiles) and by a novel nonlinear scoring function and a probabilistic-consistency algorithm. Consequently, RaptorX delivers high-quality structural models for many targets with only remote templates. At present, it takes RaptorX ~35 min to finish processing a sequence of 200 amino acids. Since its official release in August 2011, RaptorX has processed ~6,000 sequences submitted by ~1,600 users from around the world.     

Database of homology-derived protein structures and the structural meaning of sequence alignment

The database of known protein three-dimensional structures can be significantly increased by the use of sequence homology, based on the following observations. (1) The database of known sequences, currently at more than 12,000 proteins, is two orders of magnitude larger than the database of known structures. (2) The currently most powerful method of predicting protein structures is model building by homology. (3) Structural homology can be inferred from the level of sequence similarity. (4) The threshold of sequence similarity sufficient for structural homology depends strongly on the length of the alignment. Here, we first quantify the relation between sequence similarity, structure similarity, and alignment length by an exhaustive survey of alignments between proteins of known structure and report a homology threshold curve as a function of alignment length. We then produce a database of homology-derived secondary structure of proteins (HSSP) by aligning to each protein of known structure all sequences deemed homologous on the basis of the threshold curve. For each known protein structure, the derived database contains the aligned sequences, secondary structure, sequence variability, and sequence profile. Tertiary structures of the aligned sequences are implied, but not modeled explicitly. The database effectively increases the number of known protein structures by a factor of five to more than 1800. The results may be useful in assessing the structural significance of matches in sequence database searches, in deriving preferences and patterns for structure prediction, in elucidating the structural role of conserved residues, and in modeling three-dimensional detail by homology.     

Improving the alignment quality of consistency based aligners with an evaluation function using synonymous protein words

Most sequence alignment tools can successfully align protein sequences with higher levels of sequence identity. The accuracy of corresponding structure alignment, however, decreases rapidly when considering distantly related sequences (<20% identity). In this range of identity, alignments optimized so as to maximize sequence similarity are often inaccurate from a structural point of view. Over the last two decades, most multiple protein aligners have been optimized for their capacity to reproduce structure-based alignments while using sequence information. Methods currently available differ essentially in the similarity measurement between aligned residues using substitution matrices, Fourier transform, sophisticated profile-profile functions, or consistency-based approaches, more recently.In this paper, we present a flexible similarity measure for residue pairs to improve the quality of protein sequence alignment. Our approach, called SymAlign, relies on the identification of conserved words found across a sizeable fraction of the considered dataset, and supported by evolutionary analysis. These words are then used to define a position specific substitution matrix that better reflects the biological significance of local similarity. The experiment results show that the SymAlign scoring scheme can be incorporated within T-Coffee to improve sequence alignment accuracy. We also demonstrate that SymAlign is less sensitive to the presence of structurally non-similar proteins. In the analysis of the relationship between sequence identity and structure similarity, SymAlign can better differentiate structurally similar proteins from non- similar proteins. We show that protein sequence alignments can be significantly improved using a similarity estimation based on weighted n-grams. In our analysis of the alignments thus produced, sequence conservation becomes a better indicator of structural similarity. SymAlign also provides alignment visualization that can display sub-optimal alignments on dot-matrices. The visualization makes it easy to identify well-supported alternative alignments that may not have been identified by dynamic programming. SymAlign is available at http://bio-cluster.iis.sinica.edu.tw/SymAlign/.     

DPANN: improved sequence to structure alignments following fold recognition

In fold recognition (FR) a protein sequence of unknown structure is assigned to the closest known three-dimensional (3D) fold. Although FR programs can often identify among all possible folds the one a sequence adopts, they frequently fail to align the sequence to the equivalent residue positions in that fold. Such failures frustrate the next step in structure prediction, protein model building. Hence it is desirable to improve the quality of the alignments between the sequence and the identified structure. We have used artificial neural networks (ANN) to derive a substitution matrix to create alignments between a protein sequence and a protein structure through dynamic programming (DPANN: Dynamic Programming meets Artificial Neural Networks). The matrix is based on the amino acid type and the secondary structure state of each residue. In a database of protein pairs that have the same fold but lack sequences-similarity, DPANN aligns over 30% of all sequences to the paired structure, resembling closely the structural superposition of the pair. In over half of these cases the DPANN alignment is close to the structural superposition, although the initial alignment from the step of fold recognition is not close. Conversely, the alignment created during fold recognition outperforms DPANN in only 10% of all cases. Thus application of DPANN after fold recognition leads to substantial improvements in alignment accuracy, which in turn provides more useful templates for the modeling of protein structures. In the artificial case of using actual instead of predicted secondary structures for the probe protein, over 50% of the alignments are successful.     

Evaluation and improvements in the automatic alignment of protein sequences

The accuracy of protein sequence alignment obtained by applying a commonly used global sequence comparison algorithm is assessed. Alignments based on the superposition of the three-dimensional structures are used as a standard for testing the automatic, sequence-based methods. Alignments obtained from the global comparison of five pairs of homologous protein sequences studied gave 54% agreement overall for residues in secondary structures. The inclusion of information about the secondary structure of one of the proteins in order to limit the number of gaps inserted in regions of secondary structure, improved this figure to 68%. A similarity score of greater than six standard deviation units suggests that an alignment which is greater than 75% correct within secondary structural regions can be obtained automatically for the pair of sequences.     

Measurements of protein sequence-structure correlations

Correlations between protein structures and amino acid sequences are widely used for protein structure prediction. For example, secondary structure predictors generally use correlations between a secondary structure sequence and corresponding primary structure sequence, whereas threading algorithms and similar tertiary structure predictors typically incorporate interresidue contact potentials. To investigate the relative importance of these sequence-structure interactions, we measured the mutual information among the primary structure, secondary structure and side-chain surface exposure, both for adjacent residues along the amino acid sequence and for tertiary structure contacts between residues distantly separated along the backbone. We found that local interactions along the amino acid chain are far more important than non-local contacts and that correlations between proximate amino acids are essentially uninformative. This suggests that knowledge-based contact potentials may be less important for structure predication than is generally believed.     

Reduction of protein sequence complexity by residue grouping

It is well known that there are some similarities among various naturally occurring amino acids. Thus, the complexity in protein systems could be reduced by sorting these amino acids with similarities into groups and then protein sequences can be simplified by reduced alphabets. This paper discusses how to group similar amino acids and whether there is a minimal amino acid alphabet by which proteins can be folded. Various reduced alphabets are obtained by reserving the maximal information for the simplified protein sequence compared with the parent sequence using global sequence alignment. With these reduced alphabets and simplified similarity matrices, we achieve recognition of the protein fold based on the similarity score of the sequence alignment. The coverage in dataset SCOP40 for various levels of reduction on the amino acid types is obtained, which is the number of homologous pairs detected by program BLAST to the number marked by SCOP40. For the reduced alphabets containing 10 types of amino acids, the ability to detect distantly related folds remains almost at the same level as that by the alphabet of 20 types of amino acids, which implies that 10 types of amino acids may be the degree of freedom for characterizing the complexity in proteins.     

Structure-derived substitution matrices for alignment of distantly related sequences

Sequence alignment is a standard method to infer evolutionary, structural, and functional relationships among sequences. The quality of alignments depends on the substitution matrix used. Here we derive matrices based on superimpositions from protein pairs of similar structure, but of low or no sequence similarity. In a performance test the matrices are compared with 12 other previously published matrices. It is found that the structure-derived matrices are applicable for comparisons of distantly related sequences. We investigate the influence of evolutionary relationships of protein pairs on the alignment accuracy.     

NdPASA: a pairwise sequence alignment server for distantly related proteins

SUMMARY: NdPASA is a web server specifically designed to optimize sequence alignment between distantly related proteins. The program integrates structure information of the template sequence into a global alignment algorithm by employing neighbor-dependent propensities of amino acids as a unique parameter for alignment. NdPASA optimizes alignment by evaluating the likelihood of a residue pair in the query sequence matching against a corresponding residue pair adopting a particular secondary structure in the template sequence. NdPASA is most effective in aligning homologous proteins sharing low percentage of sequence identity. The server is designed to aid homologous protein structure modeling. A PSI-BLAST search engine was implemented to help users identify template candidates that are most appropriate for modeling the query sequences.     

Iterative sequence/secondary structure search for protein homologs: comparison with amino acid sequence alignments and application to fold recognition in genome databases

MOTIVATION: Sequence alignment techniques have been developed into extremely powerful tools for identifying the folding families and function of proteins in newly sequenced genomes. For a sufficiently low sequence identity it is necessary to incorporate additional structural information to positively detect homologous proteins. We have carried out an extensive analysis of the effectiveness of incorporating secondary structure information directly into the alignments for fold recognition and identification of distant protein homologs. A secondary structure similarity matrix based on a database of three-dimensionally aligned proteins was first constructed. An iterative application of dynamic programming was used which incorporates linear combinations of amino acid and secondary structure sequence similarity scores. Initially, only primary sequence information is used. Subsequently contributions from secondary structure are phased in and new homologous proteins are positively identified if their scores are consistent with the predetermined error rate. RESULTS: We used the SCOP40 database, where only PDB sequences that have 40% homology or less are included, to calibrate homology detection by the combined amino acid and secondary structure sequence alignments. Combining predicted secondary structure with sequence information results in a 8-15% increase in homology detection within SCOP40 relative to the pairwise alignments using only amino acid sequence data at an error rate of 0.01 errors per query; a 35% increase is observed when the actual secondary structure sequences are used. Incorporating predicted secondary structure information in the analysis of six small genomes yields an improvement in the homology detection of approximately 20% over SSEARCH pairwise alignments, but no improvement in the total number of homologs detected over PSI-BLAST, at an error rate of 0.01 errors per query. However, because the pairwise alignments based on combinations of amino acid and secondary structure similarity are different from those produced by PSI-BLAST and the error rates can be calibrated, it is possible to combine the results of both searches. An additional 25% relative improvement in the number of genes identified at an error rate of 0.01 is observed when the data is pooled in this way. Similarly for the SCOP40 dataset, PSI-BLAST detected 15% of all possible homologs, whereas the pooled results increased the total number of homologs detected to 19%. These results are compared with recent reports of homology detection using sequence profiling methods. AVAILABILITY: Secondary structure alignment homepage at http://lutece.rutgers.edu/ssas CONTACT: anders@rutchem.rutgers.edu; ronlevy@lutece.rutgers.edu Supplementary Information: Genome sequence/structure alignment results at http://lutece.rutgers.edu/ss_fold_predictions.     

NdPASA: a novel pairwise protein sequence alignment algorithm that incorporates neighbor-dependent amino acid propensities

Sequence alignment has become one of the essential bioinformatics tools in biomedical research. Existing sequence alignment methods can produce reliable alignments for homologous proteins sharing a high percentage of sequence identity. The performance of these methods deteriorates sharply for the sequence pairs sharing less than 25% sequence identity. We report here a new method, NdPASA, for pairwise sequence alignment. This method employs neighbor-dependent propensities of amino acids as a unique parameter for alignment. The values of neighbor-dependent propensity measure the preference of an amino acid pair adopting a particular secondary structure conformation. NdPASA optimizes alignment by evaluating the likelihood of a residue pair in the query sequence matching against a corresponding residue pair adopting a particular secondary structure in the template sequence. Using superpositions of homologous proteins derived from the PSI-BLAST analysis and the Structural Classification of Proteins (SCOP) classification of a nonredundant Protein Data Bank (PDB) database as a gold standard, we show that NdPASA has improved pairwise alignment. Statistical analyses of the performance of NdPASA indicate that the introduction of sequence patterns of secondary structure derived from neighbor-dependent sequence analysis clearly improves alignment performance for sequence pairs sharing less than 20% sequence identity. For sequence pairs sharing 13-21% sequence identity, NdPASA improves the accuracy of alignment over the conventional global alignment (GA) algorithm using the BLOSUM62 by an average of 8.6%. NdPASA is most effective for aligning query sequences with template sequences whose structure is known. NdPASA can be accessed online at http://astro.temple.edu/feng/Servers/BioinformaticServers.htm.     

Identifying sequence-structure pairs undetected by sequence alignments

We examine how effectively simple potential functions previously developed can identify compatibilities between sequences and structures of proteins for database searches. The potential function consists of pairwise contact energies, repulsive packing potentials of residues for overly dense arrangement and short-range potentials for secondary structures, all of which were estimated from statistical preferences observed in known protein structures. Each potential energy term was modified to represent compatibilities between sequences and structures for globular proteins. Pairwise contact interactions in a sequence-structure alignment are evaluated in a mean field approximation on the basis of probabilities of site pairs to be aligned. Gap penalties are assumed to be proportional to the number of contacts at each residue position, and as a result gaps will be more frequently placed on protein surfaces than in cores. In addition to minimum energy alignments, we use probability alignments made by successively aligning site pairs in order by pairwise alignment probabilities. The results show that the present energy function and alignment method can detect well both folds compatible with a given sequence and, inversely, sequences compatible with a given fold, and yield mostly similar alignments for these two types of sequence and structure pairs. Probability alignments consisting of most reliable site pairs only can yield extremely small root mean square deviations, and including less reliable pairs increases the deviations. Also, it is observed that secondary structure potentials are usefully complementary to yield improved alignments with this method. Remarkably, by this method some individual sequence-structure pairs are detected having only 5-20% sequence identity.     

Widespread protein sequence similarities: origins of Escherichia coli genes.

To learn more about the evolutionary origins of Escherichia coli genes, we surveyed systematically for extended sequence similarities among the 1,264 amino acid sequences encoded by chromosomal genes of E. coli K-12 in SwissProt release 26 by using the FASTA program and imposing the following criteria: (i) alignment of segments at least 100 amino acids long and (ii) at least 20% amino acid identity. Altogether, 624 extended alignments meeting the two criteria were identified, corresponding to 577 protein sequences (45.6% of the 1,264 E. coli protein sequences) that had an extended alignment with at least one other E. coli protein sequence. To exclude alignments of questionable biological significance, we imposed a high threshold on the number of gaps allowed in each of the 624 extended alignments, giving us a subset of 464 proteins. The population of 464 alignments has the following characteristics expressed as median values of the group: 254 amino acids in the alignment, representing 86% of the length of the protein, 33% of the amino acids in the alignment being identical, and 1.1 gaps introduced per 100 amino acids of alignment. Where functions are known, nearly all pairs consist of functionally related proteins. This implies that the sequence similarity we detected has biological meaning and did not arise by chance. That a major fraction of E. coli proteins form extended alignments strongly suggests the predominance of duplication and divergence of ancestral genes in the evolution of E. coli genes. The range of degrees of similarity shows that some genes originated more recently than others. There is no evidence of genome doubling in the past, since map distances between genes of sequence-related proteins show no coherent pattern of favored separations.     

Structure-based evaluation of sequence comparison and fold recognition alignment accuracy

The biological role, biochemical function, and structure of uncharacterized protein sequences is often inferred from their similarity to known proteins. A constant goal is to increase the reliability, sensitivity, and accuracy of alignment techniques to enable the detection of increasingly distant relationships. Development, tuning, and testing of these methods benefit from appropriate benchmarks for the assessment of alignment accuracy.Here, we describe a benchmark protocol to estimate sequence-to-sequence and sequence-to-structure alignment accuracy. The protocol consists of structurally related pairs of proteins and procedures to evaluate alignment accuracy over the whole set. The set of protein pairs covers all the currently known fold types. The benchmark is challenging in the sense that it consists of proteins lacking clear sequence similarity.Correct target alignments are derived from the three-dimensional structures of these pairs by rigid body superposition. An evaluation engine computes the accuracy of alignments obtained from a particular algorithm in terms of alignment shifts with respect to the structure derived alignments. Using this benchmark we estimate that the best results can be obtained from a combination of amino acid residue substitution matrices and knowledge-based potentials.     

A differential geometric treatment of protein structure comparison

The technique of model-building a protein of known sequence but unknown tertiary structure from the structures of homologous proteins is probably so far the most reliable means of mapping from primary to tertiary structure. A key step towards the realization of the aim is to develop ways of aligning three-dimensional structures of homologus proteins, thereby deriving the rules useful for protein modelling. We have developed a generalized differential-geometric representation of protein local conformation for use in a protein comparison program which aligns protein sequences on the basis of their sequence and conformational knowledge. Because the differetial-geometric distance measure between local conformations is independent of the coordinate frame and remains chirality information, the comparison program is easily implemented, relatively rational and reasonably fast. The utility of this program for aligning closely and distantly related homologous proteins is demonstrated by multiple alignment of globins, serine proteinases and aspartic proteinase domains. Particularly, the method has reached the rational alignment between the mammalian and microbial serine proteinases as compared with many published alignment programs.     

Origins of structural diversity within sequentially identical hexapeptides

Efforts to predict protein secondary structure have been hampered by the apparent structural plasticity of local amino acid sequences. Kabsch and Sander (1984, Proc. Natl. Acad. Sci. USA 81, 1075–1078) articulated this problem by demonstrating that identical pentapeptide sequences can adopt distinct structures in different proteins. With the increased size of the protein structure database and the availability of new methods to characterize structural environments, we revisit this observation of structural plasticity. Within a set of proteins with less than 50% sequence identity, 59 pairs of identical hexapeptide sequences were identified. These local structures were compared and their surrounding structural environments examined. Within a protein structural class (α/α, β/β, α/β, α + β), the structural similarity of sequentially identical hexapeptides usually is preserved. This study finds eight pairs of identical hexapeptide sequences that adopt β-strand structure in one protein and α-helical structure in the other. In none of the eight cases do the members of these sequence pairs come from proteins within the same folding class. These results have implications for class dependent secondary structure prediction algorithms.     

Protein sequence threading: Averaging over structures

Multiple sequence alignments are a routine tool in protein fold recognition, but multiple structure alignments are computationally less cooperative. This work describes a method for protein sequence threading and sequence-to-structure alignments that uses multiple aligned structures, the aim being to improve models from protein threading calculations. Sequences are aligned into a field due to corresponding sites in homologous proteins. On the basis of a test set of more than 570 protein pairs, the procedure does improve alignment quality, although no more than averaging over sequences. For the force field tested, the benefit of structure averaging is smaller than that of adding sequence similarity terms or a contribution from secondary structure predictions. Although there is a significant improvement in the quality of sequence-to-structure alignments, this does not directly translate to an immediate improvement in fold recognition capability.     

Fast structure alignment for protein databank searching.

A fast method is described for searching and analyzing the protein structure databank. It uses secondary structure followed by residue matching to compare protein structures and is developed from a previous structural alignment method based on dynamic programming. Linear representations of secondary structures are derived and their features compared to identify equivalent elements in two proteins. The secondary structure alignment then constrains the residue alignment, which compares only residues within aligned secondary structures and with similar buried areas and torsional angles. The initial secondary structure alignment improves accuracy and provides a means of filtering out unrelated proteins before the slower residue alignment stage. It is possible to search or sort the protein structure databank very quickly using just secondary structure comparisons. A search through 720 structures with a probe protein of 10 secondary structures required 1.7 CPU hours on a Sun 4/280. Alternatively, combined secondary structure and residue alignments, with a cutoff on the secondary structure score to remove pairs of unrelated proteins from further analysis, took 10.1 CPU hours. The method was applied in searches on different classes of proteins and to cluster a subset of the databank into structurally related groups. Relationships were consistent with known families of protein structure.