Effects of replacing active site residues in a cold-active alkaline phosphatase with those found in its mesophilic counterpart from Escherichia coli

Alkaline phosphatase (AP) from a North Atlantic marine Vibrio bacterium was previously characterized as being kinetically cold-adapted. It is still unknown whether its characteristics originate locally in the active site or are linked to more general structural factors. There are three metal-binding sites in the active site of APs, and all three metal ions participate in catalysis. The amino acid residues that bind the two zinc ions most commonly present are conserved in all known APs. In contrast, two of the residues that bind the third metal ion (numbered 153 and 328 in Escherichia coli AP) are different in various APs. This may explain their different catalytic efficiencies, as the Mg2+ most often present there is important for both structural stability and the reaction mechanism. We have mutated these key residues to the corresponding residues in E. coli AP to obtain the double mutant Asp116/Lys274, and both single mutants. All these mutants displayed reduced substrate affinity and lower overall reaction rates. The Lys274 and Asp116/Lys274 mutants also displayed an increase in global heat stability, which may be due to the formation of a stabilizing salt bridge. Overall, the results show that a single amino acid substitution in the active site is sufficient to alter the structural stability of the cold-active Vibrio AP both locally and globally, and this influences kinetic properties.     

Amino acid sequence of the cold-active alkaline phosphatase from Atlantic cod (Gadus morhua)

Atlantic cod is a marine fish that lives at low temperatures of 0-10 degrees C and contains a cold-adapted alkaline phosphatase (AP). Preparations of AP from either the lower part of the intestines or the pyloric caeca area were subjected to proteolytic digestion, mass spectrometry and amino acid sequencing by Edman degradation. The primary structure exhibits greatest similarity to human tissue non-specific AP (80%), and approximately 30% similarity to AP from Escherichia coli. The key residues required for catalysis are conserved in the cod AP, except for the third metal binding site, where cod AP has the same variable residues as mammalian APs (His153 and His328 by E. coli AP numbering). General comparison of the amino acid composition with mammalian APs showed that cod AP contains fewer Cys, Leu, Met and Ser, but proportionally more Asn, Asp, Ile, Lys, Trp and Tyr residues. Three N-linked glycosylation sites were found. The glycan structure was determined as complex biantennary in type with fucose and sialic acid attached, although a trace of complex tri-antennary structure was also observed. A three-dimensional model was obtained by homology modelling using the human placental AP scaffold. Cod AP has fewer charged and hydrophobic residues, but more polar residues at the intersubunit surface. The N-terminal helix arm that embraces the second subunit in dimeric APs may be more flexible due to a replaced Pro at its base. One disulfide bridge was found instead of the two present in most other APs. This may invoke greater movement in the structure that together with weaker subunit contacts leads to improved catalytic efficiency.     

Altering of the metal specificity of Escherichia coli alkaline phosphatase

Analysis of sequence alignments of alkaline phosphatases revealed a correlation between metal specificity and certain amino acid side chains in the active site that are metal-binding ligands. The Zn(2+)-requiring Escherichia coli alkaline phosphatase has an Asp at position 153 and a Lys at position 328. Co(2+)-requiring alkaline phosphatases from Thermotoga maritima and Bacillus subtilis have a His and a Trp at these positions, respectively. The mutations D153H, K328W, and D153H/K328W were induced in E. coli alkaline phosphatase to determine whether these residues dictate the metal dependence of the enzyme. The wild-type and D153H enzymes showed very little activity in the presence of Co(2+), but the K328W and especially the D153H/K328W enzymes effectively use Co(2+) for catalysis. Isothermal titration calorimetry experiments showed that in all cases except for the D153H/K328W enzyme, a possible conformation change occurs upon binding Co(2+). These data together indicate that the active site of the D153H/K328W enzyme has been altered significantly enough to allow the enzyme to utilize Co(2+) for catalysis. These studies suggest that the active site residues His and Trp at the E. coli enzyme positions 153 and 328, respectively, at least partially dictate the metal specificity of alkaline phosphatase.     

The 1.4 A crystal structure of the large and cold-active Vibrio sp. alkaline phosphatase

Alkaline phosphatase (AP) from the cold-adapted Vibrio strain G15-21 is among the AP variants with the highest known k(cat) value. Here the structure of the enzyme at 1.4 A resolution is reported and compared to APs from E. coli, human placenta, shrimp and the Antarctic bacterium strain TAB5. The Vibrio AP is a dimer although its monomers are without the long N-terminal helix that embraces the other subunit in many other APs. The long insertion loop, previously noted as a special feature of the Vibrio AP, serves a similar function. The surface does not have the high negative charge density as observed in shrimp AP, but a positively charged patch is observed around the active site that may be favourable for substrate binding. The dimer interface has a similar number of non-covalent interactions as other APs and the "crown"-domain is the largest observed in known APs. Part of it slopes over the catalytic site suggesting that the substrates may be small molecules. The catalytic serines are refined with multiple conformations in both monomers. One of the ligands to the catalytic zinc ion in binding site M1 is directly connected to the crown-domain and is closest to the dimer interface. Subtle movements in metal ligands may help in the release of the product and/or facilitate prior dephosphorylation of the covalent intermediate. Intersubunit interactions may be a major factor for promoting active site geometries that lead to the high catalytic activity of Vibrio AP at low temperatures.     

Metal specificity is correlated with two crucial active site residues in Escherichia coli alkaline phosphatase

Escherichia coli alkaline phosphatase exhibits maximal activity when Zn(2+) fills the M1 and M2 metal sites and Mg(2+) fills the M3 metal site. When other metals replace the zinc and magnesium, the catalytic efficiency is reduced by more than 5000-fold. Alkaline phosphatases from organisms such as Thermotoga maritima and Bacillus subtilis require cobalt for maximal activity and function poorly with zinc and magnesium. Previous studies have shown that the D153H alkaline phosphatase exhibited very little activity in the presence of cobalt, while the K328W and especially the D153H/K328W mutant enzymes can use cobalt for catalysis. To understand the structural basis for the altered metal specificity and the ability of the D153H/K328W enzyme to utilize cobalt for catalysis, we determined the structures of the inactive wild-type E. coli enzyme with cobalt (WT_Co) and the structure of the active D153H/K328W enzyme with cobalt (HW_Co). The structural data reveal differences in the metal coordination and in the strength of the interaction with the product phosphate (P(i)). Since release of P(i) is the slow step in the mechanism at alkaline pH, the enhanced binding of P(i) in the WT_Co structure explains the observed decrease in activity, while the weakened binding of P(i) in the HW_Co structure explains the observed increase in activity. These alterations in P(i) affinity are directly related to alterations in the coordination of the metals in the active site of the enzyme.     

Alkaline phosphatase from the hyperthermophilic bacterium T. maritima requires cobalt for activity

The hyperthermophilic bacterium Thermotoga maritima encodes a gene sharing sequence similarities with several known genes for alkaline phosphatase (AP). The putative gene was isolated and the corresponding protein expressed in Escherichia coli, with and without a predicted signal sequence. The recombinant protein showed phosphatase activity toward the substrate p-nitrophenyl-phosphate with a k(cat) of 16 s(-1) and a K(m) of 175 microM at a pH optimum of 8.0 when assayed at 25 degrees C. T. maritima phosphatase activity increased at high temperatures, reaching a maximum k(cat) of 100 s(-1), with a K(m) of 93 microM at 65 degrees C. Activity was stable at 65 degrees C for >24 h and at 90 degrees C for 5 h. Phosphatase activity was dependent on divalent metal ions, specifically Co(II) and Mg(II). Circular dichroism spectra showed that the enzyme gains secondary structure on addition of these metals. Zinc, the most common divalent metal ion required for activity in known APs, was shown to inhibit the T. maritima phosphatase enzyme at concentrations above 0.3 moles Zn: 1 mole monomer. All activity was abolished in the presence of 0.1 mM EDTA. The T. maritima AP primary sequence is 28% identical when compared with E. coli AP. Based on a structural model, the active sites are superimposable except for two residues near the E. coli AP Mg binding site, D153 and K328 (E. coli numbering) corresponding to histidine and tryptophan in T. maritima AP, respectively. Sucrose-density gradient sedimentation experiments showed that the protein exists in several quaternary forms predominated by an octamer.     

Isolation of the leucine aminopeptidase gene from Aeromonas proteolytica. Evidence for an enzyme precursor.

The leucine aminopeptidase of Aeromonas proteolytica (EC 3.4.11.10) is a monomeric metalloenzyme having the capacity to bind two Zn2+ atoms in the active site. Structural information of this relatively small aminopeptidase that could illuminate the catalytic mechanism of the metal ions is lacking; hence, we have obtained sequences from the purified enzyme, cloned the corresponding gene, and expressed the recombinant protein in Escherichia coli. The deduced primary amino acid sequence of this secreted protease suggests a potential signal peptide at the NH2 terminus. Expression of the recombinant and native proteins in E. coli and in extracts of culture media of A. proteolytica indicates that the aminopeptidase is secreted as an active and thermosensitive 43-kDa protein that is rapidly transformed to thermostable forms of 30 and 32 kDa. Comparison of the deduced amino acid sequence of the A. proteolytica leucine aminopeptidase with other Zn(2+)-binding metalloenzymes failed to show homologies to the consensus binding sequence His-Glu-X-X-His for the metal ion.     

The domain structure of the dihydrolipoyl transacetylase component of the pyruvate dehydrogenase complex from Azotobacter vinelandii

Limited proteolysis with trypsin has been used to study the domain structure of the dihydrolipoyltransacetylase (E2) component of the pyruvate dehydrogenase complex of Azotobacter vinelandii. Two stable end products were obtained and identified as the N-terminal lipoyl domain and the C-terminal catalytic domain. By performing proteolysis of E2, which was covalently attached via its lipoyl groups to an activated thiol-Sepharose matrix, a separation was obtained between the catalytic domain and the covalently attached lipoyl domain. The latter was removed from the column after reduction of the S-S bond and purified by ultrafiltration. The lipoyl domain is monomeric with a mass of 32.6 kDa. It is an elongated structure with f/fo = 1.62. Circulair dichroic studies indicates little secondary structure. The catalytic domain is polymeric with S20.w = 17 S and mass = 530 kDa. It is a compact structure with f/fo = 1.24 and shows 40% of the secondary structure of E2. The cubic structure of the native E2 is retained by this fragment as observed by electron microscopy. Ultracentrifugation in 6 M guanidine hydrochloride in the presence of 2 mM dithiothreitol yields a mass of 15.8 kDa. An N-terminal sequence of 36 amino acids is homologous with residues 370-406 of Escherichia coli E2. The catalytic domain possesses the catalytic site, but in contrast to the E. coli subunit binding domain the pyruvate dehydrogenase (E1) and lipoamide dehydrogenase (E3) binding sites are lost during proteolysis. From comparison with the E. coli E2 sequence a model is presented in which the several functions, such as lipoyl domain, the E3 binding site, the catalytic site, the E2/E2 interaction sites, and the E1 binding site, are indicated.     

Crystal structure of the dimeric phosphoenolpyruvate carboxykinase (PEPCK) from Trypanosoma cruzi at 2 A resolution.

ATP-dependent phosphoenolpyruvate carboxykinase (PEPCK) (ATP: oxaloacetate carboxylyase (transphosphorylating), EC 4.1.1.49) is a key enzyme involved in the catabolism of glucose and amino acids in the parasite Trypanosoma cruzi, the causative agent of Chagas' disease. Due to the significant differences in the amino acid sequence and substrate specificity of the human enzyme (PEPCK (GTP-dependent), EC 4.1.1.32), the parasite enzyme has been considered a good target for the development of new anti-chagasic drugs. We have solved the crystal structure of the recombinant PEPCK of T. cruzi up to 2.0 A resolution, characterised the dimeric organisation of the enzyme by solution small angle X-ray scattering (SAXS) and compared the enzyme structure with the known crystal structure of the monomeric PEPCK from Escherichia coli. The dimeric structure possesses 2-fold symmetry, with each monomer sharing a high degree of structural similarity with the monomeric structure of the E. coli PEPCK. Each monomer folds into two complex mixed alpha/beta domains, with the active site located in a deep cleft between the domains. The two active sites in the dimer are far apart from each other, in an arrangement that seems to permit an independent access of the substrates to the two active sites. All residues of the E. coli PEPCK structure that had been found to interact with substrates and metal cofactors have been found conserved and in a substantially equivalent spatial disposition in the T. cruzi PEPCK structure. No substrate or metal ion was present in the crystal structure. A sulphate ion from the crystallisation medium has been found bound to the active site. Solution SAXS data suggest that, in solutions with lower sulphate concentration than that used for the crystallisation experiments, the actual enzyme conformation may be slightly different from its conformation in the crystal structure. This could be due to a conformational transition upon sulphate binding, similar to the ATP-induced transition observed in the E. coli PEPCK, or to crystal packing effects. The present structure of the T. cruzi PEPCK will provide a good basis for the modelling of new anti-chagasic drug leads.     

Characterization of a monomeric Escherichia coli alkaline phosphatase formed upon a single amino acid substitution

Alkaline phosphatase (AP) from Escherichia coli as well as APs from many other organisms exist in a dimeric quaternary structure. Each monomer contains an active site located 32 A away from the active site in the second subunit. Indirect evidence has previously suggested that the monomeric form of AP is inactive. Molecular modeling studies indicated that destabilization of the dimeric interface should occur if Thr-59, located near the 2-fold axis of symmetry, were replaced by a sterically large and charged residue such as arginine. The T59R enzyme was constructed and characterized by sucrose-density gradient sedimentation, size-exclusion chromatography, and circular dichroism (CD) and compared with the previously constructed T59A enzyme. The T59A enzyme was found to exist as a dimer, whereas the T59R enzyme was found to exist as a monomer. The T59A, T59R, and wild-type APs exhibited almost identical secondary structures as judged by CD. The T59R monomeric AP has a melting temperature (Tm) of 43 degrees C, whereas the wild-type AP dimer has a Tm of 97 degrees C. The catalytic activity of the T59R enzyme was reduced by 104-fold, whereas the T59A enzyme exhibited an activity similar to that of the wild-type enzyme. The T59A and wild-type enzymes contained similar levels of zinc and magnesium, whereas the T59R enzyme has almost undetectable amounts of tightly bound metals. These results suggest that a significant conformational change occurs upon dimerization, which enhances thermal stability, metal binding, and catalysis.     

Alkaline phosphatase from the Antarctic strain TAB5. Properties and psychrophilic adaptations.

The gene encoding alkaline phosphatase (AP) from the psychrophilic strain TAB5 was cloned, and its nucleotide sequence was determined. A single open reading frame consisting of 1125 base pairs which encodes a polypeptide consisting of signal peptide of 22 amino acids and a mature protein of 353 amino acids was identified. The deduced protein sequence of AP exhibits a 38% identity to the AP III and AP IV sequences of Bacillus subtilis and conserves the typical sequence motifs of the core structure and active sites of APs from various sources. Based on the crystal structure of the mutated Escerichia coli AP D153H, a homology-based 3D model of the TAB5 AP was constructed on the basis of which various features of the enzyme amino-acid sequence can be interpreted in terms of potential psychrophilic adaptations. The AP gene was expressed in E. coli BL21(DE3) cells, the recombinant protein was isolated to homogeneity from the membrane fraction of the cells and its properties were examined. The purified TAB5 AP shows typical features of a cold enzyme: high catalytic activity at low temperature and a remarkable thermosensitivity. The use of this heat-labile enzyme, for dephosphorylation of nucleic acids, simplifies dephosphorylation protocols.     

High resolution structure of the phosphohistidine-activated form of Escherichia coli cofactor-dependent phosphoglycerate mutase

The active conformation of the dimeric cofactor-dependent phosphoglycerate mutase (dPGM) from Escherichia coli has been elucidated by crystallographic methods to a resolution of 1.25 A (R-factor 0.121; R-free 0.168). The active site residue His(10), central in the catalytic mechanism of dPGM, is present as a phosphohistidine with occupancy of 0.28. The structural changes on histidine phosphorylation highlight various features that are significant in the catalytic mechanism. The C-terminal 10-residue tail, which is not observed in previous dPGM structures, is well ordered and interacts with residues implicated in substrate binding; the displacement of a loop adjacent to the active histidine brings previously overlooked residues into positions where they may directly influence catalysis. E. coli dPGM, like the mammalian dPGMs, is a dimer, whereas previous structural work has concentrated on monomeric and tetrameric yeast forms. We can now analyze the sequence differences that cause this variation of quaternary structure.     

TLR序列在SRP54蛋白与SRPRNA和信号肽结合中的作用

SRP54蛋白是信号识别颗粒(signal recognition particle)的一个关键组分.对人SRP54蛋白328～330位的TLR3个氨基酸进行人工诱变,在大肠杆菌BL21(DE3)pLysS中表达了A3突变体,并对A3突变体进行纯化和Superdex75凝胶过滤分析.观察到A3突变体丧失了与SRPRNA结合的能力,其自身也不能形成二聚体.结果证明,TLR这3个氨基酸残基与二聚体结构的形成有关,TLR是SRP54蛋白结合SRPRNA和新生蛋白质信号肽所必需的关键性氨基酸序列.     

Homology of Escherichia coli B glutathione synthetase with dihydrofolate reductase in amino acid sequence and substrate binding site

Glutathione synthetase from Escherichia coli B showed amino acid sequence homology with mammalian and bacterial dihydrofolate reductases over 40 residues, although these two enzymes are different in their reaction mechanisms and ligand requirements. The effects of ligands of dihydrofolate reductase on the reaction of E. coli B glutathione synthetase were examined to find resemblances in catalytic function to dihydrofolate reductase. The E. coli B enzyme was potently inhibited by 7,8-dihydrofolate, methotrexate, and trimethoprim. Methotrexate was studied in detail and proved to bind to an ATP binding site of the E. coli B enzyme with K1 value of 0.1 mM. The homologous portion of the amino acid sequence in dihydrofolate reductases, which corresponds to the portion coded by exon 3 of mammalian dihydrofolate reductase genes, provided a binding site of the adenosine diphosphate moiety of NADPH in the crystal structure of dihydrofolate reductase. These analyses would indicate that the homologous portion of the amino acid sequence of the E. coli B enzyme provides the ATP binding site. This report gives experimental evidence that amino acid sequences related by sequence homology conserve functional similarity even in enzymes which differ in their catalytic mechanisms.     

The dihydrolipoyltransacetylase component of the pyruvate dehydrogenase complex from Azotobacter vinelandii. Molecular cloning and sequence analysis

The gene encoding the dihydrolipoyltransacetylase component (E2) of the pyruvate dehydrogenase complex from Azotobacter vinelandii has been cloned in Escherichia coli. A plasmid containing a 2.8-kbp insert of A. vinelandii chromosomal DNA was obtained and its nucleotide sequence determined. The gene comprises 1911 base pairs, 637 codons excluding the initiation codon GUG and stop codon UGA. It is preceded by the gene encoding the pyruvate dehydrogenase component (E1) of pyruvate dehydrogenase complex and by an intercistronic region of 11 base pairs containing a good ribosome binding site. The gene is followed downstream by a strong terminating sequence. The relative molecular mass (64913), amino acid composition and N-terminal sequence are in good agreement with information obtained from studies on the purified enzyme. Approximately the first half of the gene codes for the lipoyl domain. Three very homologous sequences are present, which are translated in three almost identical units, alternated with non-homologous regions which are very rich in alanyl and prolyl residues. The N-terminus of the catalytic domain is sited at residue 381. Between the lipoyl domain and the catalytic domain, a region of about 50 residues is found containing many charged amino acid residues. This region is characterized as a hinge region and is involved in the binding of the pyruvate dehydrogenase and lipoamide dehydrogenase components. The homology with the dihydrolipoyltransacetylase from E. coli is high: 50% amino acid residues are identical.     

Purification and characterization of monomeric isocitrate dehydrogenase with NADP(+)-specificity from Vibrio parahaemolyticus Y-4.

NADP(+)-dependent isocitrate dehydrogenase [IDH: EC 1.1.1.42] was purified to electrophoretic homogeneity from Vibrio parahaemolyticus Y-4, and shown to be a monomeric protein of molecular weight 80,000 with a pI of 5.0. The amino acid composition and partial sequence at the N-terminus resembled those reported for other bacterial monomeric IDHs. Immunotitration with antisera to the monomeric and dimeric enzymes (antisera to IDH-II and -I of Vibrio ABE-1) showed an immunochemical distinction between the monomeric and dimeric IDHs, but there is similarity within the IDHs of each group. The circular dichroism spectra of the native and heat-denatured enzyme are also similar to those of monomeric IDH (IDH-II of Vibrio ABE-1). These monomeric IDHs are proteins comprising 17-22% helix and 25-35% beta-pleated sheet in the native state.     

Methionyl-tRNA synthetase from Bacillus stearothermophilus: structural and functional identities with the Escherichia coli enzyme.

The metS gene encoding homodimeric methionyl-tRNA synthetase from Bacillus stearothermophilus has been cloned and a 2880 base pair sequence solved. Comparison of the deduced enzyme protomer sequence (Mr 74,355) with that of the E. coli methionyl-tRNA synthetase protomer (Mr 76,124) revealed a relatively low level (32%) of identities, although both enzymes have very similar biochemical properties (Kalogerakos, T., Dessen, P., Fayat, G. and Blanquet, S. (1980) Biochemistry 19, 3712-3723). However, all the sequence patterns whose functional significance have been probed in the case of the E. coli enzyme are found in the thermostable enzyme sequence. In particular, a stretch of 16 amino acids corresponding to the CAU anticodon binding site in the E. coli synthetase structure is highly conserved in the metS sequence. The metS product could be expressed in E. coli and purified. It showed structure-function relationships identical to those of the enzyme extracted from B. stearothermophilus cells. In particular, the patterns of mild proteolysis were the same. Subtilisin converted the native dimer into a fully active monomeric species (62 kDa), while trypsin digestion yielded an inactive form because of an additional cleavage of the 62 kDa polypeptide into two subfragments capable however of remaining firmly associated. The subtilisin cleavage site was mapped on the enzyme polypeptide, and a gene encoding the active monomer was constructed and expressed in E. coli. Finally, trypsin attack was demonstrated to cleave a peptidic bond within the KMSKS sequence common to E. coli and B. stearothermophilus methionyl-tRNA synthetases. This sequence has been shown, in the case of the E. coli enzyme, to have an essential role for the catalysis of methionyl-adenylate formation.     

Glutamic acid residues as metal ligands in the active site of Escherichia coli alkaline phosphatase

Four independent mutations were introduced to the Escherichia coli alkaline phosphatase active site, and the resulting enzymes characterized to study the effects of Glu as a metal ligand. The mutations D51E and D153E were created to study the effects of lengthening the carboxyl group by one methylene unit at the metal interaction site. The D51E enzyme had drastically reduced activity and lost one zinc per active site, demonstrating importance of the position of Asp(51). The D153E enzyme had an increased k(cat) in the presence of high concentrations of Mg(2+), along with a decreased Mg(2+) affinity as compared to the wild-type enzyme. The H331E and H412E enzymes were created to probe the requirement for a nitrogen-containing metal ligand at the Zn(1) site. The H331E enzyme had greatly decreased activity, and lost one zinc per active site. In the absence of high concentrations of Zn(2+), dephosphorylation occurs at an extremely reduced rate for the H412E enzyme, and like the H331E enzyme, metal affinity is reduced. Except at the 153 position, Glu is not an acceptable metal chelating amino acid at these positions in the E. coli alkaline phosphatase active site.     

Divergent allosteric patterns verify the regulatory paradigm for aspartate transcarbamylase

The native Escherichia coli aspartate transcarbamoylase (ATCase, E.C. 2.1.3.2) provides a classic allosteric model for the feedback inhibition of a biosynthetic pathway by its end products. Both E. coli and Erwinia herbicola possess ATCase holoenzymes which are dodecameric (2(c3):3(r2)) with 311 amino acid residues per catalytic monomer and 153 and 154 amino acid residues per regulatory (r) monomer, respectively. While the quaternary structures of the two enzymes are identical, the primary amino acid sequences have diverged by 14 % in the catalytic polypeptide and 20 % in the regulatory polypeptide. The amino acids proposed to be directly involved in the active site and nucleotide binding site are strictly conserved between the two enzymes; nonetheless, the two enzymes differ in their catalytic and regulatory characteristics. The E. coli enzyme has sigmoidal substrate binding with activation by ATP, and inhibition by CTP, while the E. herbicola enzyme has apparent first order kinetics at low substrate concentrations in the absence of allosteric ligands, no ATP activation and only slight CTP inhibition. In an apparently important and highly conserved characteristic, CTP and UTP impose strong synergistic inhibition on both enzymes. The co-operative binding of aspartate in the E. coli enzyme is correlated with a T-to-R conformational transition which appears to be greatly reduced in the E. herbicola enzyme, although the addition of inhibitory heterotropic ligands (CTP or CTP+UTP) re-establishes co-operative saturation kinetics. Hybrid holoenzymes assembled in vivo with catalytic subunits from E. herbicola and regulatory subunits from E. coli mimick the allosteric response of the native E. coli holoenzyme and exhibit ATP activation. The reverse hybrid, regulatory subunits from E. herbicola and catalytic subunits from E. coli, exhibited no response to ATP. The conserved structure and diverged functional characteristics of the E. herbicola enzyme provides an opportunity for a new evaluation of the common paradigm involving allosteric control of ATCase.     

Nucleotide sequence of the gene for alkaline phosphatase of Thermus caldophilus GK24 and characteristics of the deduced primary structure of the enzyme

The gene encoding Thermus caldophilus GK24 (Tca) alkaline phosphatase was cloned into Escherichia coli. The primary structure of Tca alkaline phosphatase was deduced from its nucleotide sequence. The Tca alkaline phosphatase precursor, including the signal peptide sequence, was comprised of 501 amino acid residues. Its molecular mass was determined to be 54? omitted?760 Da. On the alignment of the amino acid sequence, Tca alkaline phosphatase showed sequence homology with the microbial alkaline phosphatases, 20% identity with E. coli alkaline phosphatase and 22% Bacillus subtilis (Bsu) alkaline phosphatases. High sequence identity was observed in the regions containing the Ser-102 residue of the active site, the zinc and magnesium binding sites of E. coli alkaline phosphatase. Comparison of Tca alkaline phosphatase and E. coli alkaline phosphatase structures suggests that the reduced activity of the Tca alkaline phosphatase, in the presence of zinc, is directly involved in some of the different metal binding sites. Heat-stable Tca alkaline phosphatase activity was detected in E. coli YK537, harboring pJRAP.