Characterization of a Theta Plasmid Replicon with Homology to All Four Large Plasmids ofBacillus megateriumQM B1551

A replicon from one of an array of seven indigenous compatible plasmids ofBacillus megateriumQM B1551 has been cloned and sequenced. The replicon hybridized with all four of the large plasmids (165, 108, 71, and 47 kb) of strain QM B1551. The cloned 2374-bpHindIII fragment was sequenced and contained two upstream palindromes and a large (>419-amino-acid) open reading frame (ORF) truncated at the 3′ end. Unlike most plasmid origins, a region of four tandem 12-bp direct repeats was located within the ORF. The direct repeats alone were incompatible with the replicon, suggesting that they are iterons and that the plasmid probably replicates by theta replication. The ORF product was shown to act intrans.A small region with similarity to theB. subtilischromosomal origin membrane binding region was detected as were possible binding sites for DnaA and IHF proteins. Deletion analysis showed the minimal replicon to be a 1675-bp fragment containing the incomplete ORF plus 536 bp upstream. The predicted ORF protein of >48 kDa was basic and rich in glutamate + glutamine (16%). There was no significant amino acid similarity to any gene, nor were there any obvious motifs present in the ORF. The data suggest that this is a theta replicon with an expressedrepgene required for replication. The replicon contains its iterons within the gene and has no homology to reported replicons. It is the first characterization of aB. megateriumreplicon.     

Molecular Characterization of Plasmid pBM300 from Bacillus megaterium QM B1551

Strain QM B1551 of Bacillus megaterium contains seven compatible plasmids: two small rolling circle plasmids and five theta-replicating plasmids with cross-hybridizing replicons. To expand our understanding of these plasmids, the replicon region (6.7 kb) from pBM300 was cloned, sequenced, and functionally characterized. Sequence analysis showed that the replication protein (RepM300) was highly homologous to two other plasmid Rep proteins of the same strain but to no other known proteins. Furthermore, the location of the replication origin was within the RepM300 coding region, and the origin contained three 12-base direct repeats. Deletion analysis of the replicon confirmed the role of the Rep protein and showed that open reading frame 2 (ORF2) was required for stability. However, the protein encoded by ORF2 is entirely different from the replicon stability proteins encoded by the other two replicons. The entire plasmid was isolated from the plasmid array by integrating a spectinomycin resistance gene and transforming a plasmidless strain, PV361. Complete sequencing showed that pBM300 was 26,300 bp long, had a G+C content of 35.2%, and contained 20 ORFs, two of which encoded proteins that had no similarity to other proteins in the database. The proteins encoded by the plasmid ORFs had similarity to proteins for mobilization and transfer, an integrase, a rifampin resistance protein, a cell wall hydrolase, glutathione synthase, and a biotin carboxylase. The similarities were to several gram-positive genera and a few gram-negative genera and archaea. oriT and ssoT-like regions were detected near two mob genes. These results suggest that pBM300 is a mobilizable hybrid plasmid that confers increased metabolic and germination ability on its host. Its replicon also helps define a new plasmid family.     

Replication Mechanism and Sequence Analysis of the Replicon of pAW63, a Conjugative Plasmid from Bacillus thuringiensis

A 5.8-kb fragment of the large conjugative plasmid pAW63 from Bacillus thuringiensis subsp. kurstaki HD73 containing all the information for autonomous replication was cloned and sequenced. By deletion analysis, the pAW63 replicon was reduced to a 4.1-kb fragment harboring four open reading frames (ORFs). Rep63A (513 amino acids [aa]), encoded by the largest ORF, displayed strong similarity (40% identity) to the replication proteins from plasmids pAMbeta1, pIP501, and pSM19035, indicating that the pAW63 replicon belongs to the pAMbeta1 family of gram-positive theta-replicating plasmids. This was confirmed by the facts that no single-stranded DNA replication intermediates could be detected and that replication was found to be dependent on host-gene-encoded DNA polymerase I. An 85-bp region downstream of Rep63A was also shown to have strong similarity to the origins of replication of pAMbeta1 and pIP501, and it is suggested that this region contains the bona fide pAW63 ori. The protein encoded by the second large ORF, Rep63B (308 aa), was shown to display similarity to RepB (34% identity over 281 aa) and PrgP (32% identity over 310 aa), involved in copy control of the Enterococcus faecalis plasmids pAD1 and pCF10, respectively. No significant similarity to known proteins or DNA sequences could be detected for the two smallest ORFs. However, the location, size, hydrophilicity, and orientation of ORF6 (107 codons) were analogous to those features of the putative genes repC and prgO, which encode stability functions on plasmids pAD1 and pCF10, respectively. The cloned replicon of plasmid pAW63 was stably maintained in Bacillus subtilis and B. thuringiensis and displayed incompatibility with the native pAW63. Hybridization experiments using the cloned replicon as a probe showed that pAW63 has similarity to large plasmids from other B. thuringiensis subsp. kurstaki strains and to a strain of B. thuringiensis subsp. alesti.     

A novel cryptic plasmid pBMB175 from <Emphasis Type="Italic">Bacillus thuringiensis </Emphasis>subsp. <Emphasis Type="Italic">tenebrionis </Emphasis>YBT-1765

A new cryptic plasmid pBMB175 from Bacillus thuringiensis subsp. tenebrionis YBT-1765 was isolated and characterized. Sequence analysis showed that pBMB175 (14,841 bp and 31% GC content) contained at least eighteen putative open reading frames (ORFs), among which nine ORFs displayed the homology with the hypothetical proteins in rolling-circle replication plasmid pGI3. Deletion analysis revealed that the pBMB175 minireplicon located in a novel 1,151 bp fragment. This fragment contains ORF7 coding sequence, which encodes a protein (Rep175, 149 amino acids [aa]) indispensable for plasmid replication. Rep175 has no significant homology with known function proteins. Furthermore, a putative double-strand origin (dso), having no DNA similarity with characterized dso of other replicon so far, was identified in this minireplicon fragment. These features showed that pBMB175 could be placed into a new plasmid family.     

苏云金芽胞杆菌拟步行甲亚种YBT-1765中稳定质粒pBMB175的克隆和功能分析

从苏云金芽胞杆菌拟步行甲亚种YBT_1765中克隆得到一个大小约15.2kb的质粒pBMB175,构建了该质粒的限制性图谱,通过功能验证,将其最小的复制区定位在一个1151bp的片段上。分析了包含有这个复制区的一个大小为4152bp的核苷酸序列,该片段包含有3个编码框(ORF1、OFR2和ORF3)。氨基酸序列同源性比较发现,ORF1(767AA)与UvrD_旋促酶、重组酶RecD和RecB家族具有20%～30%的相似性;ORF2(149AA)没有发现与任何已知序列具有同源性;ORF3(83AA)与pGI3中一个未知功能的蛋白(ORF7)具有34%的相似性。通过缺失及序列比较分析推测ORF2可能编码一种新的复制蛋白。因此pBMB175的复制类型可能属于一类新的复制家族。利用最小复制区构建的重组质粒在无抗生素选择压力下可稳定遗传40多代,具备构建稳定遗传质粒载体的潜力。     

Minireplicon from pBtoxis of Bacillus thuringiensis subsp. israelensis

A 2.2-kb fragment containing a replicon from pBtoxis, the large plasmid that encodes the insecticidal endotoxins of Bacillus thuringiensis subsp. israelensis, was identified, cloned, and sequenced. This fragment contains cis elements, including iterons, found in replication origins of other large plasmids and suggests that pBtoxis replicates by a type A theta mechanism. Two genes, pBt156 and pBt157, encoding proteins of 54.4 kDa and 11.8 kDa, respectively, were present in an operon within this minireplicon, and each was shown by deletion analysis to be essential for replication. The deduced amino acid sequences of the 54.4-kDa and 11.8-kDa proteins showed no substantial homology with known replication (Rep) proteins. However, the 54.4-kDa protein contained a conserved FtsZ domain, and the 11.8 kDa protein contained a helix-turn-helix motif. As FtsZ proteins have known functions in bacterial cell division and the helix-turn-helix motif is present in Rep proteins, it is likely that these proteins function in plasmid replication and partitioning. The minireplicon had a copy number of two or three per chromosome equivalent in B. thuringiensis subsp. israelensis but did not replicate in B. cereus, B. megaterium, or B. subtilis. A plasmid constructed to synthesize large quantities of the Cry11A and Cyt1A endotoxins demonstrated that this minireplicon can be used to engineer vectors for cry and cyt gene expression.     

pVC, a small cryptic plasmid from the environmental isolate of Vibrio cholerae MP-1

A marine bacterium was isolated from Mai Po Nature Reserve of Hong Kong and identified as Vibrio cholerae MP-1. It contains a small plasmid designated as pVC of 3.8 kb. Four open reading frames (ORFs) are identified on the plasmid, but none of them shows homology to any known protein. Database search indicated that a 440 bp fragment is 96% identical to a fragment found in a small plasmid of another V. cholerae. Further experiments demonstrated that a 2.3 kb EcoRI fragment containing the complete ORF1, partial ORF4 and their intergenic region could self-replicate. Additional analyses revealed that sequence upstream of ORF1 showed the features characteristic of theta type replicons. Protein encoded by ORF1 has two characteristic motifs existed in most replication initiator proteins (Rep): the leucine zipper (LZ) motif located at the N-terminal region and the alpha helix-turn-alpha helix motif (HTH) located at the C-terminal end. The results suggest that pVC replicates via the theta type mechanism and is likely a novel type of theta replicon.     

Replication origin region of Bacillus subtilis chromosome contains two rRNA operons.

The first replicating DNA fragment (BamHI-7) of the Bacillus subtilis chromosome contains two promoters for a rRNA operon. A map of restriction enzyme cleavage sites of the region of replication origin suggests the presence of a second rRNA operon in this region. Hybridization of rRNA genes (rDNA) with DNA fragments derived from the origin region by treatment with various enzymes clearly revealed two rRNA operons in this region, one at the B7-B3 junction and the other at the B5-B6 junction. The restriction enzyme cleavage sites surrounding the rRNA operons show that the operon at the B5-B6 junction corresponds to the rrnA operon. A novel operon at the B7-B3 junction was termed rrnO. Transformation by density-labeled fragments of the origin region showed that the first replicating marker, guaA, is located in the B3 fragment. From these results, a map was constructed for the first time to correlate the genetic markers with the physical structure of the replication origin region of the B. subtilis chromosome. The role of the rrnO operon in regulating the initiation of chromosomal replication is discussed, based on the fact that the promoter of the rrnO operon suppresses the replication of the plasmid carrying the promoter.     

Genetic analysis of a novel plasmid pZMX101 from Halorubrum saccharovorum: determination of the minimal replicon and comparison with the related haloarchaeal plasmid pSCM201

The DNA sequence of a novel haloarchaeal plasmid pZMX101 (3918 bp) from Halorubrum saccharovorum was determined and six ORFs were predicted. The largest ORF encodes a putative replication initiation protein RepA, which shares 40% sequence similarity with the Rep201 of a theta-replication plasmid pSCM201 recently isolated from Haloarcula, suggesting that pZMX101 might replicate via a theta-type mechanism. Using pZMX101 as the only haloarchaeal replicon, a shuttle vector pZMX108 was constructed and successfully transformed into Haloferax volcanii DS70. Based on this in vivo system, the minimal replicon (1978 bp) of pZMX101 was determined. It is composed of the repA gene plus c. 400-bp upstream and 300-bp downstream sequences. Significantly, the putative replication origin of pZMX101 and that of pSCM201 contain different types of sequence motifs, and these two plasmids exhibit distinct host preference for Haloferax and Haloarcula, respectively.     

Two independent replicons can support replication of the anthrax toxin-encoding plasmid pXO1 of Bacillus anthracis

The large pXO1 plasmid (181.6kb) of Bacillus anthracis encodes the anthrax toxin proteins. Previous studies have shown that two separate regions of pXO1 can support replication of pXO1 miniplasmids when introduced into plasmid-less strains of this organism. No information is currently available on the ability of the above two replicons, termed RepX and ORFs 14/16 replicons, to support replication of the full-length pXO1 plasmid. We generated mutants of the full-length pXO1 plasmid in which either the RepX or the ORFs 14/16 replicon was inactivated by TargeTron insertional mutagenesis. Plasmid pXO1 derivatives containing only the RepX or the ORFs 14/16 replicon were able to replicate when introduced into a plasmid-less B. anthracis strain. Plasmid copy number analysis showed that the ORFs 14/16 replicon is more efficient than the RepX replicon. Our studies demonstrate that both the RepX and ORFs 14/16 replicons can independently support the replication of the full-length pXO1 plasmid.     

Characterization of a cryptic plasmid from Bacillus sphaericus strain LP1-G

A cryptic plasmid from Bacillus sphaericus strain LP1-G, designated as pLG, was sequenced and characterized. It was an 11,066bp circular molecule, with G+C content of 37%. The plasmid pLG was predicted to encode 23 putative ORFs, and ORF 21 shared the highest identity with Rep of pGI1 and pBMB9741, members of rolling-circle replication (RCR) pC194-family. Sequence analysis revealed a pC194-type double strand origin (dso) and a single strand origin (sso) like sequence located upstream and downstream of ORF 21, respectively. Moreover, Mung bean nuclease analysis and Southern hybridization confirmed the existence of single stranded DNA (ssDNA) intermediates, indicating that pLG belongs to the RCR pC194-family. Accumulation of multiple ssDNA intermediates in native strain LP1-G and decline of ssDNA and supercoiled DNA in rifampicin-treated strain implied that a special mechanism might be employed by pLG. Furthermore, the copy number of pLG in its original host was determined and about 58 copies of the plasmid exist in each cell. Subcloning and transformation experiments proved that the minimal replicon of pLG was within a 1.6-kb fragment, which was composed of rep gene and dso. These data are a good basis for the understanding of replication mechanisms and genetics of this B. sphaericus plasmid.     

A cryptic plasmid, pAO1, from a compost bacterium, Bacillus sp

The complete nucleotide sequence of a new cryptic plasmid, pAO1 isolated from a compost bacterium Bacillus sp., has been analyzed. Analysis of the PCR-based 16S rRNA sequence showed the bacterium harboring pAO1 was closely related to Bacillus pallidus. The plasmid pAO1 was 3,325 bp in size. Two open reading frames, ORF1 and ORF2, encoding putative polypeptides of 248 and 290 amino acids, respectively, were identified within the sequence. The ORF1 has a limited sequence similarity to an integrase/recombinase, while the ORF2 has high similarity with the replication protein of pBC1 from Bacillus coagulans. A putative origin sequence for a plus-strand was located between ORFs. Southern blot analysis indicates this plasmid replicates via a rolling circle-type mechanism.     

Complete nucleotide sequence of pGS18, a 62.8-kb plasmid from <Emphasis Type="Italic">Geobacillus stearothermophilus</Emphasis> strain 18

The complete nucleotide sequence (62.8 kb) of pGS18, the largest sequenced plasmid to date from the species Geobacillus stearothermophilus, was determined. Computational analysis of sequence data revealed 65 putative open reading frames (ORFs); 38 were carried on one strand and 27 were carried on the other. These ORFs comprised 84.1% of the pGS18 sequence. Twenty-five ORFs (38.4%) were assigned to putative functions; four ORFs (6.2%) were annotated as pseudogenes. The amino acid sequences obtained from 29 ORFs (44.6%) had the highest similarity to hypothetical proteins of the other microorganisms, and seven (10.8%) had no significant similarity to any genes present in the current open databases. Plasmid replication region, strongly resembling that of the theta-type replicon, and genes encoding three different plasmid maintenance systems were identified, and a putative discontinuous transfer region was localized. In addition, we also found several mobile genetic elements and genes, responsible for DNA repair, distributed along the whole sequence of pGS18. The alignment of pGS18 with two other large indigenous plasmids of the genus Geobacillus highlighted the presence of well-conserved segments and has provided a framework that can be exploited to formulate hypotheses concerning the molecular evolution of these three plasmids.     

Sequence and analysis of pBM02, a novel RCR cryptic plasmid from Lactococcus lactis subsp cremoris P8-2-47

This paper reports the complete nucleotide sequence of the 3.85 kbp plasmid pBM02 from Lactococcus lactis subsp. cremoris P8-2-47. Analysis of the sequence predicted six ORFs larger than 25 amino acids. They all were transcribed from the same strand and organized in two functional cassettes: the replication region and a putative mobilization region. In the replication region, two ORFs specifying proteins homologous to others found in some classes of rolling circle-replicating plasmids were encountered (copG and repB). In fact, single-stranded DNA was detected as a replication intermediate of pBM02. copG and repB, together with some upstream sequences, formed part of the minimal replication unit of the plasmid. Interestingly, pBM02 shared a 212 bp stretch with plasmids of the pWV01 type, in which the whole single-strand origin of replication is included. In the mobilization region, an ORF coding for a mobilization-like protein was present, preceded by a putative oriT sequence homologous to that of plasmid pMV158. The replicon of pBM02 is of the wide-host range type, and functions in both Gram-positive and Gram-negative bacteria, including Lactobacillus casei, Lactobacillus plantarum, Bacillus subtilis, and Escherichia coli.     

Bioinformatic and partial functional analysis of pEspA and pEspB, two plasmids from Exiguobacterium arabatum sp. nov. RFL1109

The complete nucleotide sequences of two plasmids from Exiguobacterium arabatum sp. nov. RFL1109, pEspA (4563bp) and pEspB (38,945bp), have been determined. Five ORFs were identified in the pEspA plasmid, and putative functions were assigned to two of them. Using deletion mapping approach, the Rep-independent replication region of pEspA, which functions in Bacillus subtilis, was localized within a 0.6kb DNA region. Analysis of the pEspB sequence revealed 42 ORFs. From these, function of two genes encoding enzymes of the Lsp1109I restriction-modification system was confirmed experimentally, while putative functions of another 18 ORFs were suggested based on comparative analysis. Three functional regions have been proposed for the pEspB plasmid: the putative conjugative transfer region, the region involved in plasmid replication and maintenance, and the region responsible for transposition of the IS21 family-like transposable elements.     

Identification and characterization of a novel type of replication terminator with bidirectional activity on the Bacillus subtilis theta plasmid pLS20

We have sequenced and analysed a 3.1 kb fragment of the 55 kb endogenous Bacillus subtilis plasmid pLS20 containing its replication functions. Just outside the region required for autonomous replication, a segment of 18bp was identified as being almost identical to part of the major B. subtilis chromosomal replication terminator. Here, we demonstrate that this segment is part of a functional replication terminator. This newly identified element, designated Ter LS20, is the first replication terminator identified on a theta plasmid from a Gram-positive bacterium. Ter LS20 is distinct from other known replication terminators in the sense that it is functional in both orientations. The region required for bipolar functionality of TerLS20 was delineated to a sequence of 29 bp, which is characterized by an imperfect dyad symmetry.