Study of a synthetic human olfactory receptor 17-4: expression and purification from an inducible mammalian cell line

In order to begin to study the structural and functional mechanisms of olfactory receptors, methods for milligram-scale purification are required. Here we demonstrate the production and expression of a synthetically engineered human olfactory receptor hOR17-4 gene in a stable tetracycline-inducible mammalian cell line (HEK293S). The olfactory receptor gene was fabricated from scratch using PCR-based gene-assembly, which facilitated codon optimization and attachment of a 9-residue bovine rhodopsin affinity tag for detection and purification. Induction of adherent cultures with tetracycline together with sodium butyrate led to hOR17-4 expression levels of approximately 30 microg per 150 mm tissue culture plate. Fos-choline-based detergents proved highly capable of extracting the receptors, and fos-choline-14 (N-tetradecylphosphocholine) was selected for optimal solubilization and subsequent purification. Analysis by SDS-PAGE revealed both monomeric and dimeric receptor forms, as well as higher MW oligomeric species. A two-step purification method of immunoaffinity and size exclusion chromatography was optimized which enabled 0.13 milligrams of hOR17-4 monomer to be obtained at >90% purity. This high purity of hOR17-4 is not only suitable for secondary structural and functional analyses but also for subsequent crystallization trials. Thus, this system demonstrates the feasibility of purifying milligram quantities of the GPCR membrane protein hOR17-4 for fabrication of olfactory receptor-based bionic sensing device.     

High-level expression, single-step immunoaffinity purification and characterization of human tetraspanin membrane protein CD81

The study of membrane protein structure and function requires their high-level expression and purification in fully functional form. We previously used a tetracycline-inducible stable mammalian cell line, HEK293S-TetR, for regulated high-level expression of G-protein coupled receptors. We here report successfully using this method for high-level expression of de novo oligo-DNA assembled human CD81 gene. CD81 is a member of the vital tetraspanin membrane protein family. It has recently been identified as the putative receptor for the Hepatitis C Virus envelope E2 glycoprotein (HCV-E2). In this study we used a single-step rho-1D4-affinity purification method to obtain >95% purity from HEK293S-TetR-inducible stable cell lines. Using ELISA assay we determined that the affinity of the purified CD81 receptor for HCV-E2 protein is 3.8+/-1.2 nM. Using fluorescent confocal microscopy we showed that the inducibly overexpressed CD81 receptor in HEK293S-TetR cells is correctly located on the plasma membrane. We demonstrated that the combination of high-level expression of CD81 with efficient single-step immunoaffinity purification is a useful method for obtaining large quantities of CD81 membrane receptor suitable for detailed structural analyses of this elusive tetraspanin protein. Furthermore, this simple single-step immunoaffinity purification to high purity of membrane protein could be useful broadly for other membrane protein purifications, thus accelerating the determination of structures for large numbers of difficult-to-obtain membrane proteins.     

Challenges and opportunities in the purification of recombinant tagged proteins

The purification of recombinant proteins by affinity chromatography is one of the most efficient strategies due to the high recovery yields and purity achieved. However, this is dependent on the availability of specific affinity adsorbents for each particular target protein. The diversity of proteins to be purified augments the complexity and number of specific affinity adsorbents needed, and therefore generic platforms for the purification of recombinant proteins are appealing strategies. This justifies why genetically encoded affinity tags became so popular for recombinant protein purification, as these systems only require specific ligands for the capture of the fusion protein through a pre-defined affinity tag tail. There is a wide range of available affinity pairs “tag-ligand” combining biological or structural affinity ligands with the respective binding tags. This review gives a general overview of the well-established “tag-ligand” systems available for fusion protein purification and also explores current unconventional strategies under development.     

Fully automated protein purification

Obtaining highly purified proteins is essential to begin investigating their functional and structural properties. The steps that are typically involved in purifying proteins can include an initial capture, intermediate purification, and a final polishing step. Completing these steps can take several days and require frequent attention to ensure success. Our goal was to design automated protocols that would allow the purification of proteins with minimal operator intervention. Separate methods have been produced and tested that automate the sample loading, column washing, sample elution and peak collection steps for ion exchange, metal affinity, hydrophobic interaction, and gel filtration chromatography. These individual methods are designed to be coupled and run sequentially in any order to achieve a flexible and fully automated protein purification protocol.     

Optimized expression and purification of myristoylated human neuronal calcium sensor 1 in E. coli

We have developed a protocol to produce large quantities of high purity myristoylated and non-myristoylated neuronal calcium sensor 1 (NCS-1) protein. NCS-1 is a member of the neuronal calcium sensor (NCS) family and plays an important role in modulating G-protein signaling and exocytosis pathways in cells. Many of these functions are calcium-dependent and require NCS-1 to be modified with an N-terminal myristoyl moiety. In our system, a C-terminally 6x His-tagged variant of NCS-1 was co-expressed with yeast N-myristoyltransferase (NMT) in ZYP-5052 auto-induction media supplemented with sodium myristate (100-200 microM). With optimized growth conditions and a high capacity metal affinity purification scheme, >50mg of homogenous myristoylated NCS-1 is obtained from 1L of culture in a single step. The properties of the C-terminally tagged NCS-1 variants are indistinguishable from those reported for untagged NCS-1. Using this system, we have also isolated and characterized mutant NCS-1 proteins that have attenuated (NCS-1 E120Q) and abrogated (NCS-1 DeltaEF) ability to bind calcium. The large quantities of NCS-1 proteins isolated from small culture volumes of auto-inducible media will provide the necessary reagents for further biochemical and structural characterization. The affinity tag at the C-terminus of the protein provides a suitable reagent for easily identifying binding partners of the various NCS-1 constructs. Additionally, this method could be used to produce other recombinant proteins of the NCS family, and may be extended to express and isolate myristoylated variants of other proteins.     

An affinity matrix for the purification of poly(ADP-ribose) glycohydrolase.

The preparation of quantities of poly(ADP-ribose) glycohydrolase sufficient for detailed structural and enzymatic characterizations has been difficult due to the very low tissue content of the enzyme and its lability in late stages of purification. To date, the only purification of this enzyme to apparent homogeneity has involved a procedure requiring 6 column chromatographic steps. Described here is the preparation of an affinity matrix which consists of ADP-ribose polymers bound to dihydroxyboronyl sepharose. An application is described for the purification of poly(ADP-ribose) glycohydrolase from calf thymus in which a single rapid affinity step was used to replace 3 column chromatographic steps yielding enzyme of greater than 90% purity with a 3 fold increase in yield. This matrix should also prove useful for other studies of ADP-ribose polymer metabolism and related clinical conditions.     

Selection of aptamers for a protein target in cell lysate and their application to protein purification

Functional genomics requires structural and functional studies of a large number of proteins. While the production of proteins through over-expression in cultured cells is a relatively routine procedure, the subsequent protein purification from the cell lysate often represents a significant challenge. The most direct way of protein purification from a cell lysate is affinity purification using an affinity probe to the target protein. It is extremely difficult to develop antibodies, classical affinity probes, for a protein in the cell lysate; their development requires a pure protein. Thus, isolating the protein from the cell lysate requires antibodies, while developing antibodies requires a pure protein. Here we resolve this loop problem. We introduce AptaPIC, Aptamer-facilitated Protein Isolation from Cells, a technology that integrates (i) the development of aptamers for a protein in cell lysate and (ii) the utilization of the developed aptamers for protein isolation from the cell lysate. Using MutS protein as a target, we demonstrate that this technology is applicable to the target protein being at an expression level as low as 0.8% of the total protein in the lysate. AptaPIC has the potential to considerably speed up the purification of proteins and, thus, accelerate their structural and functional studies.     

Beneficial properties of single-domain antibody fragments for application in immunoaffinity purification and immuno-perfusion chromatography

We explored the possibility to apply single-domain antibodies from Camelidae for immunoaffinity purification of the ice structuring protein (ISP) from Lolium perenne, which modifies ice crystal growth and therefore has potential application in medicine, biotechnology, agriculture and (frozen) foods. Using phage display together with an appropriate selection method, a group of candidate fragments was isolated from a llama-derived immune library. Affinity chromatography using a purposely selected antibody coupled to a matrix yielded a completely pure and functional ISP. Due to the extreme refolding capabilities and physical stability of single-domain antibodies, the affinity matrix could be regenerated more than 2000 times without loss of capacity, while the fragment's monomeric nature permitted an efficient elution of antigen. The results of this study show that highly pure proteins can be recovered from biological material in a single-step process.     

Generation and refinement of peptide mimetic ligands for paratope-specific purification of monoclonal antibodies

Paratope-specific purification of antibodies has distinct advantages over conventional methods of antibody purification with respect to its capacity to isolate product of high purity and immunoreactivity. The present report addresses the problems of identifying peptide ligands for the purification of antibodies reactive with nonprotein antigens. Using an anti-steroid antibody as the model, a lead sequence that bound antibody was identified from a peptide phage display library. The minimum binding unit in this sequence was deduced using a series of truncated peptides synthesized on the heads of polyethylene pins. Replacement Net analysis of the minimum binding unit identified peptides with increased affinity for the antibody. The affinity-matured peptide mimotope bound antibody in solution. By molecular modeling the peptide was superimposable onto estrone-3-glucuronide localized in the crystal structure of the antibody binding pocket. In order to resolve problems of presentation posed by the reversal of orientation of the peptide on the affinity matrix compared with the pins, the mimotope peptide was synthesized in reverse sequence using d-amino acids. The resulting affinity matrix was effective for the purification of antibody. Eluted product demonstrated molecular homogeneity and high immunoreactivity. It is concluded that the combination of biological and chemical library techniques described provides a method for the generation and affinity maturation of mimotopes for antibodies against nonprotein antigens.     

Tetanus toxoid purification: chromatographic procedures as an alternative to ammonium-sulphate precipitation

Given an existing demand to establish a process of tetanus vaccine production in a way that allows its complete validation and standardization, this paper focuses on tetanus toxoid purification step. More precisely, we were looking at a possibility to replace the widely used ammonium-sulphate precipitation by a chromatographic method. Based on the tetanus toxin's biochemical characteristics, we have decided to examine the possibility of tetanus toxoid purification by hydrophobic chromatography, and by chromatographic techniques based on interaction with immobilized metal ions, i.e. chelating chromatography and immobilized metal affinity chromatography. We used samples obtained from differently fragmented crude tetanus toxins by formaldehyde treatment (assigned as TTd-A and TTd-B) as starting material for tetanus toxoid purification. Obtained results imply that purification of tetanus toxoid by hydrophobic chromatography represents a good alternative to ammonium-sulphate precipitation. Tetanus toxoid preparations obtained by hydrophobic chromatography were similar to those obtained by ammonium-sulphate precipitation in respect to yield, purity and immunogenicity. In addition, their immunogenicity was similar to standard tetanus toxoid preparation (NIBSC, Potters Bar, UK). Furthermore, the characteristics of crude tetanus toxin preparations had the lowest impact on the final purification product when hydrophobic chromatography was the applied method of tetanus toxoid purification. On the other hand, purifications of tetanus toxoid by chelating chromatography or immobilized metal affinity chromatography generally resulted in a very low yield due to not satisfactory tetanus toxoid binding to the column, and immunogenicity of the obtained tetanus toxoid-containing preparations was poor.     

Turkey muscle acylphosphatase: purification and comparative studies

Turkey muscle acylphosphatase is strongly bound to anti-(horse muscle acylphosphatase ) antibodies covalently linked to an agarose resin. This permits use of an affinity chromatography step in the purification, which increased the final yield and allowed us to isolate three different molecular forms of the enzyme. Form 1 is a mixed disulfide between the polypeptide chain and glutathione; form 3 is an S-S dimer of the polypeptide chain present in form 1, while form 2, present in a very low amount, consists of a polypeptide chain quite similar in aminoacid composition to that found in form 1. The three molecular forms show very similar kinetic parameters. The comparison of these molecular forms with those isolated from horse muscle showed similar kinetic properties but different structural features.     

Affinity purification of fibrinogen using an Affimer column

BackgroundFibrinogen is an abundant plasma protein with an essential role in blood coagulation and haemostasis thus receiving significant research interest. However, protein purification is time consuming and commercial preparations often have protein contaminants. The aim of this study was to develop a new method to purify high quality and functional fibrinogen.MethodsFibrinogen-specific Affimer protein, isolated using phage display systems, was immobilised to SulfoLink resin column and employed for fibrinogen purification from plasma samples. Fibrinogen was eluted using a high pH solution. Commercial human fibrinogen was also further purified using the Affimer column. Fibrinogen purity was determined by SDS-PAGE and mass spectrometry, while functionality was assessed using turbidimetric analysis.ResultsAffimer-purified fibrinogen from human plasma showed purity at least comparable to commercially available preparations and was able to form physiological fibrin networks. Further purification of commercially available fibrinogen using the Affimercolumn eliminated multiple contaminant proteins, a significant number of which are key elements of the coagulation cascade, including plasminogen and factor XIII.ConclusionsThe Affimercolumn represents a proof of concept novel, rapid method for isolating functional fibrinogen from plasma and for further purification of commercially available fibrinogen preparations.General significanceOur methodology provides an efficient way of purifying functional fibrinogen with superior purity without the need of expensive pieces of equipment or the use of harsh conditions.     

Tandem affinity purification of functional TAP-tagged proteins from human cells

Tandem affinity purification (TAP) is a generic two-step affinity purification protocol for isolation of TAP-tagged proteins together with associated proteins. We used bacterial artificial chromosome to heterologously express TAP-tagged murine Sgo1 protein in human HeLa cells. This allowed us to test the functionality of the Sgo1-TAP protein by RNA interference-mediated depletion of the endogenous human Sgo1. Here, we present an optimized protocol for purification of TAP-tagged Sgo1 protein as well as KIAA1387 from HeLa cells with detailed instructions. The purification protocol can be completed in 1 day and it should be applicable to other proteins.     

One-step purification of Taq DNA polymerase using nucleotide-mimetic affinity chromatography

The thermostable Thermus aquaticus DNA polymerase (Taq Pol) has been the key factor in transforming the initial PCR method into one with huge impact in molecular biology and biotechnology. Therefore, the development of effective affinity adsorbents for the purification of Taq Pol, as well as other DNA polymerases, attracts the attention of the enzyme manufacturers and the research laboratories. In this report we describe a simple protocol for the purification of Taq Pol from E. coli lysates, leading to enzymes of high specific activity and purity. The protocol is based on a single affinity chromatography step, featuring an immobilized ligand selected from a structure-biased combinatorial library of dNTP-mimetic synthetic ligands. The ligand library was screened for its ability to bind and purify Taq Pol from E. coli lysates. One immobilized ligand (mABSGu) of the general formula X-Trz-Y, bearing 9-aminoethylguanine (AEGu) and aniline-2-sulfonic acid (mABS) linked on the triazine scaffold (Trz), displayed the highest purifying ability. Adsorption equilibrium studies with this affinity ligand and Taq Pol determined a dissociation constant (KD) of 0.12 mM for the respective complex, whereas ATP prevented the formation of the mABSGu-Taq Pol complex. The mABSGu affinity adsorbent was exploited in the development of a facile Taq Pol purification protocol, affording homogeneous enzyme (>99% purity, approximately 61 500 U/mg) in a single chromatography step. Quality control tests showed that Taq Pol purified on the mABSGu affinity adsorbent is free of nucleic acids and contaminating nuclease activities.     

Bioreactor-scale production and one-step purification of Epstein-Barr nuclear antigen 1 expressed in baculovirus-infected insect cells

Epstein-Barr virus (EBV)-encoded nuclear antigen 1 (EBNA1) is expressed in all EBV-associated malignancies and is essential for EBV-genome maintenance. Antibodies to EBNA1 are abundantly detected in serum of most EBV carriers but EBNA1 escapes recognition by effector T-lymphocytes. To further study the functional and immunological characteristics of EBNA1 it is important to have sufficient quantities of purified EBNA1 available. This paper describes a simple, reproducible method for the production and purification of EBV-encoded EBNA1 expressed in insect cells (bEBNA1). For quantification of EBNA1 expression levels in cell lines and for monitoring bEBNA1 purification and overall yields we developed a quantitative and EBNA1-specific capture ELISA. We observed that EBV-positive cell lines express EBNA1 at different levels, with the B cell lymphoblastoid cell line X50/7 having the highest production. However, much larger quantities (380-fold) were obtained by expressing bEBNA1 in recombinant-baculovirus-infected Sf9 insect cells. Scaling-up experiments revealed that bEBNA1 expression kinetics and protein stability are identical in 1-liter stirred bioreactors when compared to expression in stationary culture flasks. Optimal expression was reached after 72 h following inoculation at 1 pfu/cell, when insect cell viability was about 50%. For purification the nuclear fraction containing most of the bEBNA1 (>95%) was isolated. Solubilized bEBNA1 was purified by a one-step oriP DNA-Sepharose affinity purification procedure, using biotinylated PCR-amplified family of repeats (FR)-domain products immobilized onto streptavidin agarose. A >200-fold specific enrichment was reached and yields of bEBNA1 with an estimated purity of >95%.     

One-step affinity purification of recombinant urokinase-type plasminogen activator receptor using a synthetic peptide developed by combinatorial chemistry

Several lines of evidence have pointed to a role of urokinase-type plasminogen activator receptor (uPAR) as a modulator of certain biochemical processes that are active during tumor invasion and metastasis. Consequently, the structure and function of this receptor have been studied extensively, using recombinantly produced uPAR that has been purified by either affinity chromatography using its cognate ligand, the urokinase-type plasminogen activator (uPA), or a monoclonal anti-uPAR antibody (R2), or by hydroxyapatite. Here, we present a new method for the efficient one-step affinity purification of recombinant uPAR exploiting a high-affinity synthetic peptide antagonist (AE152). The corresponding parent peptide was originally identified in a random phage-display library and subsequently subjected to affinity maturation by combinatorial chemistry. This study compares the affinity purification of a soluble, recombinant uPAR using the monoclonal antibody R2 or the peptide AE152 immobilized on Sepharose. The two affinity ligands perform equally well in purifying uPAR from Drosophila melanogaster Schneider 2 cell culture medium and yield products of comparable purity, activity, and stability as judged by SDS-PAGE, size exclusion chromatography and surface plasmon resonance analysis. The general availability of peptide synthesis renders the present AE152-based affinity purification of uPAR more accessible than the traditional protein-based affinity purification strategies. In this way, large amounts of recombinant uPAR can conveniently be purified for further structural and functional studies.     

The rat ovarian lutropin receptor. Purification, hormone binding properties, and subunit composition

The luteinizing hormone/human choriogonadotropin (hCG) receptor from superovulated rat ovary was purified to homogeneity. A novel scheme based on reverse immunoaffinity chromatography using immobilized antibodies to membrane proteins from receptor down-regulated ovary and subsequent two-step affinity purification on hCG-Sepharose was used to isolate homogeneous receptor. The purification method was also compared to an alternate scheme involving lectin affinity chromatography followed by hCG affinity chromatography. The purified receptor obtained by the latter method was heterogeneous and highly aggregated. The hormone binding properties, molecular size, and subunit composition of the purified receptor obtained by either method were identical. The stability of the receptor during and following solubilization was markedly improved by using 20% glycerol. The pure receptor consists of four nonidentical subunits of molecular weight 79,300 (alpha), 66,400 (beta), 55,300 (gamma), and 46,700 (delta) as indicated by polyacrylamide gel electrophoresis under reducing conditions. All receptor subunits generally, but occasionally excepting the alpha-subunit, were specifically labeled with iodinated hCG in membrane and soluble receptor preparations using bifunctional cross-linking agents. Analysis of the cross-linked hormone-receptor complexes under nonreducing conditions showed the molecular mass of the undissociated receptor to be 268,000 daltons. Hormone binding studies demonstrated that the isolated receptor retained all of the specific binding characteristics expected for the luteinizing hormone/hCG receptor. In combination, these results indicate that the functional and structural properties of the receptor were not altered during purification.     

Efficient bispecific monoclonal antibody purification using gradient thiophilic affinity chromatography

Bispecific monoclonal antibodies (bsMAbs), due their unique design, have a wide range of potential applications in immunodiagnostics and immunotherapy. One of the major limitations for the use of bsMAbs produced by hybrid–hybridomas is the concomitant production of parental monospecific antibodies. The relative amount of bsMAb secreted may vary between different hybrid–hybridomas. Hence, the purification of the desired bispecific molecule from other forms is crucial. Current purification methods include anion-exchange, HPLC on different matrices, and dual affinity methods. Most of those methods include multiple steps and have limitations on the purity or yield of the desired species. We report here a simple single-step purification method, using inexpensive thiophilic chromatography. This new method can potentially be scaled up, for industrial proposes. Finally, based on the amino acid sequences and assembly of the two heavy chains we attempt to explain the possible mechanism by which thiophilic chromatography was able to resolve the bsMAbs from the monospecific species.     

Large scale purification of the nuclear thyroid hormone receptor from rat liver and sequence-specific binding of the receptor to DNA

Methodology is reported for extracting thyroid hormone receptors from rat liver nuclei and for purifying these such that certain receptor properties can be examined. The extraction technique resulted in 1700 pmol of receptor/2 kg of liver and bypasses centrifugation in dense sucrose. The receptor was then purified by sequential heparin-Sepharose, DEAE-Sepharose, and phospho-Ultrogel chromatography and size exclusion and hydrophobic interaction high performance liquid chromatography. These steps yielded 23-35 micrograms of receptor at 0.7-1.5% purity from two 2-kg liver preparations. The cross-linkers disuccinimidyl suberate and N-succinimidyl-6-(4-azido-2-nitrophenylamino)hexanoate were employed to covalently attach 125I-labeled 3,5,3'-triiodo-L-thyronine (T3) to the purified receptor. Autoradiography after denaturing polyacrylamide gel electrophoresis revealed major 49,000 Mr and minor 58,000 Mr specific T3-binding proteins. The purified receptors exhibited high affinity (Kd = 100 pM) single site T3-binding activity. Because of the high affinity and specificity of [125I]T3 for the receptor, it was possible to uniquely identify the receptor containing DNA-protein complexes in a gel retardation assay and thus directly demonstrate for the first time that the receptor can specifically recognize sequences in the 5'-flanking DNA of the rat growth hormone gene. [125I]T3-labeled receptor migrated at the same position as the major gel-retarded 32P-labeled DNA band. Specific DNA competed for the binding much more strongly than nonspecific DNA. Thus, the purification procedure results in relatively large quantities of receptor at a purity sufficient for detecting and studying a number of its properties including specific DNA binding activity.     

Purine nucleoside phosphorylase: purification using an ether-linked formycin B/sepharose 6B resin with unusual properties

Formycin B [9-deazainosine] was reacted with epoxy-activated Sepharose 6B to form an affinity resin for purine nucleoside phosphorylase (PNPase). This resin had a large capacity (7,600 units/ml) for the enzyme from Escherichia coli. Enzyme retention was dependent on high ionic strength. Although this property is reminiscent of hydrophobic interaction chromatography, analogous resins prepared with pseudouridine or monoethanolamine instead of with formycin B, did not retain the enzyme even at high ionic strength. Furthermore, hypoxanthine facilitatted elution of the enzyme from the resin. It appeared, therefore, that the enzyme was not bound simply by hydrophobic interactions. A simple two-step purification procedure for PNPase from Escherichia coli was devised using this resin. Overall recovery was 50%, and purity of the final preparation was greater than 95%. This resin was also useful in the purification of PNPase from human erythrocytes. The ether linkage between formycin B and Sepharose 6B, together with the carbon-to-carbon linkage between the pentose and heterocyclic moieties of formycin B, provided stability to both chemical and enzymatic degradation. After 5 years of use and exposure to a variety of biological preparations, the resin showed no detectable decrease in its ability to bind PNPase.