High-pressure macromolecular crystallography (HPMX): status and prospects

Recent technical developments, achievements and prospects of high-pressure (HP) macromolecular crystallography (MX) are reviewed. Technical difficulties associated with this technique have been essentially solved by combining synchrotron radiation of ultra-short wavelength, large-aperture diamond anvil cells and new sample-mounting techniques. The quality of diffraction data collected at HP can now meet standards of conventional MX. The exploitation of the potential of the combination of X-ray diffraction and high-pressure perturbation is progressing well. The ability of pressure to shift the population distribution of conformers in solution, which is exploited in particular by NMR, can also be used in the crystalline state with specific advantages. HPMX has indeed bright prospects, in particular to elucidate the structure of higher-energy conformers that are often of high biological significance. Furthermore, HPMX may be of interest for conventional crystallographic studies, as pressure is a fairly general tool to improve order in pre-existing crystals with minimal perturbation of the native structure.     

ISPyB: an information management system for synchrotron macromolecular crystallography

MOTIVATION: Individual research groups now analyze thousands of samples per year at synchrotron macromolecular crystallography (MX) resources. The efficient management of experimental data is thus essential if the best possible experiments are to be performed and the best possible data used in downstream processes in structure determination pipelines. Information System for Protein crystallography Beamlines (ISPyB), a Laboratory Information Management System (LIMS) with an underlying data model allowing for the integration of analyses down-stream of the data collection experiment was developed to facilitate such data management. RESULTS: ISPyB is now a multisite, generic LIMS for synchrotron-based MX experiments. Its initial functionality has been enhanced to include improved sample tracking and reporting of experimental protocols, the direct ranking of the diffraction characteristics of individual samples and the archiving of raw data and results from ancillary experiments and post-experiment data processing protocols. This latter feature paves the way for ISPyB to play a central role in future macromolecular structure solution pipelines and validates the application of the approach used in ISPyB to other experimental techniques, such as biological solution Small Angle X-ray Scattering and spectroscopy, which have similar sample tracking and data handling requirements.     

Doses for experiments with microbeams and microcrystals: Monte Carlo simulations in RADDOSE‐3D

Increasingly, microbeams and microcrystals are being used for macromolecular crystallography (MX) experiments at synchrotrons. However, radiation damage remains a major concern since it is a fundamental limiting factor affecting the success of macromolecular structure determination. The rate of radiation damage at cryotemperatures is known to be proportional to the absorbed dose, so to optimize experimental outcomes, accurate dose calculations are required which take into account the physics of the interactions of the crystal constituents. The program RADDOSE‐3D estimates the dose absorbed by samples during MX data collection at synchrotron sources, allowing direct comparison of radiation damage between experiments carried out with different samples and beam parameters. This has aided the study of MX radiation damage and enabled prediction of approximately when it will manifest in diffraction patterns so it can potentially be avoided. However, the probability of photoelectron escape from the sample and entry from the surrounding material has not previously been included in RADDOSE‐3D, leading to potentially inaccurate does estimates for experiments using microbeams or microcrystals. We present an extension to RADDOSE‐3D which performs Monte Carlo simulations of a rotating crystal during MX data collection, taking into account the redistribution of photoelectrons produced both in the sample and the material surrounding the crystal. As well as providing more accurate dose estimates, the Monte Carlo simulations highlight the importance of the size and composition of the surrounding material on the dose and thus the rate of radiation damage to the sample. Minimizing irradiation of the surrounding material or removing it almost completely will be key to extending the lifetime of microcrystals and enhancing the potential benefits of using higher incident X‐ray energies.     

Validation of macromolecular flexibility in solution by small-angle X-ray scattering (SAXS)

The dynamics of macromolecular conformations are critical to the action of cellular networks. Solution X-ray scattering studies, in combination with macromolecular X-ray crystallography (MX) and nuclear magnetic resonance (NMR), strive to determine complete and accurate states of macromolecules, providing novel insights describing allosteric mechanisms, supramolecular complexes, and dynamic molecular machines. This review addresses theoretical and practical concepts, concerns, and considerations for using these techniques in conjunction with computational methods to productively combine solution-scattering data with high-resolution structures. I discuss the principal means of direct identification of macromolecular flexibility from SAXS data followed by critical concerns about the methods used to calculate theoretical SAXS profiles from high-resolution structures. The SAXS profile is a direct interrogation of the thermodynamic ensemble and techniques such as, for example, minimal ensemble search (MES), enhance interpretation of SAXS experiments by describing the SAXS profiles as population-weighted thermodynamic ensembles. I discuss recent developments in computational techniques used for conformational sampling, and how these techniques provide a basis for assessing the level of the flexibility within a sample. Although these approaches sacrifice atomic detail, the knowledge gained from ensemble analysis is often appropriate for developing hypotheses and guiding biochemical experiments. Examples of the use of SAXS and combined approaches with X-ray crystallography, NMR, and computational methods to characterize dynamic assemblies are presented.     

Inducing phase changes in crystals of macromolecules: status and perspectives for controlled crystal dehydration

The increase in the number of large multi-component complexes and membrane protein crystal structures determined over the last few years can be ascribed to a number of factors such as better protein expression and purification systems, the emergence of high-throughput crystallization techniques and the advent of 3rd generation synchrotron sources. However, many systems tend to produce crystals that can be extremely heterogeneous in their diffraction properties. This prevents, in many cases, the collection of diffraction data of sufficient quality to yield useful biological or phase information. Techniques that can increase the diffraction quality of macromolecular crystals can therefore be essential in the successful conclusion of these challenging projects. No technique is universal but encouraging results have been recently achieved by carrying out the controlled dehydration of crystals of biological macromolecules. A new device that delivers a stream of air with a precisely controlled relative humidity to the complicated sample environment found at modern synchrotron beamlines has been conceived at the EMBL Grenoble and developed by the EMBL and the ESRF as part of the SPINE2 complexes project, a European Commission funded protein structure initiative. The device, the HC1b, has been available for three years at the ESRF macromolecular crystallography beamlines and many systems have benefitted from on-line controlled dehydration. Here we describe a standard dehydration experiment, highlight some successful cases and discuss the different possible uses of the device.     

New light for science: synchrotron radiation in structural medicine

Macromolecular crystallography (MX) is a powerful method for obtaining detailed three-dimensional structural information about macromolecules. MX using synchrotron X-rays has contributed, significantly, to both fundamental and applied research, including the structure-based design of drugs to combat important diseases. New third-generation synchrotrons offer substantial improvements in terms of quality and brightness of the X-ray beams they produce. Important classes of macromolecules, such as membrane proteins (including many receptors) and macromolecular complexes, are difficult to obtain in quantity and to crystallise, which has hampered analysis by MX. Intensely bright X-rays from the latest synchrotrons will enable the use of extremely small crystals, and should usher in a period of rapid progress in resolving these previously refractory structures.     

Inference of macromolecular assemblies from crystalline state

We discuss basic physical-chemical principles underlying the formation of stable macromolecular complexes, which in many cases are likely to be the biological units performing a certain physiological function. We also consider available theoretical approaches to the calculation of macromolecular affinity and entropy of complexation. The latter is shown to play an important role and make a major effect on complex size and symmetry. We develop a new method, based on chemical thermodynamics, for automatic detection of macromolecular assemblies in the Protein Data Bank (PDB) entries that are the results of X-ray diffraction experiments. As found, biological units may be recovered at 80-90% success rate, which makes X-ray crystallography an important source of experimental data on macromolecular complexes and protein-protein interactions. The method is implemented as a public WWW service.     

Automated sample mounting and alignment system for biological crystallography at a synchrotron source

High-throughput data collection for macromolecular crystallography requires an automated sample mounting and alignment system for cryo-protected crystals that functions reliably when integrated into protein-crystallography beamlines at synchrotrons. Rapid mounting and dismounting of the samples increases the efficiency of the crystal screening and data collection processes, where many crystals can be tested for the quality of diffraction. The sample-mounting subsystem has random access to 112 samples, stored under liquid nitrogen. Results of extensive tests regarding the performance and reliability of the system are presented. To further increase throughput, we have also developed a sample transport/storage system based on "puck-shaped" cassettes, which can hold sixteen samples each. Seven cassettes fit into a standard dry shipping Dewar. The capabilities of a robotic crystal mounting and alignment system with instrumentation control software and a relational database allows for automated screening and data collection to be developed.     

Use of a Robot for High-throughput Crystallization of Membrane Proteins in Lipidic Mesophases

Structure-function studies of membrane proteins greatly benefit from having available high-resolution 3-D structures of the type provided through macromolecular X-ray crystallography (MX). An essential ingredient of MX is a steady supply of ideally diffraction-quality crystals. The in meso or lipidic cubic phase (LCP) method for crystallizing membrane proteins is one of several methods available for crystallizing membrane proteins. It makes use of a bicontinuous mesophase in which to grow crystals. As a method, it has had some spectacular successes of late and has attracted much attention with many research groups now interested in using it. One of the challenges associated with the method is that the hosting mesophase is extremely viscous and sticky, reminiscent of a thick toothpaste. Thus, dispensing it manually in a reproducible manner in small volumes into crystallization wells requires skill, patience and a steady hand. A protocol for doing just that was developed in the Membrane Structural & Functional Biology (MS&FB) Group^1-3. JoVE video articles describing the method are available^1,4. The manual approach for setting up in meso trials has distinct advantages with specialty applications, such as crystal optimization and derivatization. It does however suffer from being a low throughput method. Here, we demonstrate a protocol for performing in meso crystallization trials robotically. A robot offers the advantages of speed, accuracy, precision, miniaturization and being able to work continuously for extended periods under what could be regarded as hostile conditions such as in the dark, in a reducing atmosphere or at low or high temperatures. An in meso robot, when used properly, can greatly improve the productivity of membrane protein structure and function research by facilitating crystallization which is one of the slow steps in the overall structure determination pipeline. In this video article, we demonstrate the use of three commercially available robots that can dispense the viscous and sticky mesophase integral to in meso crystallogenesis. The first robot was developed in the MS&FB Group^5,6. The other two have recently become available and are included here for completeness. An overview of the protocol covered in this article is presented in Figure 1. All manipulations were performed at room temperature (~20 °C) under ambient conditions.     

Automated crystal mounting and data collection for protein crystallography

To increase the efficiency of diffraction data collection for protein crystallographic studies, an automated system designed to store frozen protein crystals, mount them sequentially, align them to the X-ray beam, collect complete data sets, and return the crystals to storage has been developed. Advances in X-ray data collection technology including more brilliant X-ray sources, improved focusing optics, and faster-readout detectors have reduced diffraction data acquisition times from days to hours at a typical protein crystallography laboratory [1,2]. In addition, the number of high-brilliance synchrotron X-ray beam lines dedicated to macromolecular crystallography has increased significantly, and data collection times at these facilities can be routinely less than an hour per crystal. Because the number of protein crystals that may be collected in a 24 hr period has substantially increased, unattended X-ray data acquisition, including automated crystal mounting and alignment, is a desirable goal for protein crystallography. The ability to complete X-ray data collection more efficiently should impact a number of fields, including the emerging structural genomics field [3], structure-directed drug design, and the newly developed screening by X-ray crystallography [4], as well as small molecule applications.     

Neutron protein crystallography: current status and a brighter future

Hydrogen atoms are rarely seen in X-ray protein crystal structures, but are readily visualized by neutron crystallography, even at typical (1.5-2.5A) resolutions. Recent advances in neutron beamlines and deuterium labeling technologies have dramatically extended the scale and range of structures studied. High-quality neutron data can be collected to near atomic resolution ( approximately 1.5-2.5A) for proteins of 50-175kDa molecular weight, from perdeuterated samples, from crystals with volumes of 0.1mm(3) and at cryogenic temperatures (15K). These structures are providing unique and complementary insights into hydrogen-bonding interactions, protonation states, catalytic mechanisms and hydration states of biological structures that are not available from X-ray analysis alone. The new generation of spallation neutron sources promises further 10-50-fold gains in performance.     

Experimental approaches for solution X-ray scattering and fiber diffraction

X-ray scattering and diffraction from non-crystalline systems have gained renewed interest in recent years, as focus shifts from the structural chemistry information gained by high-resolution studies to the context of structural physiology at larger length scales. Such techniques permit the study of isolated macromolecules as well as highly organized macromolecular assemblies as a whole under near-physiological conditions. Time-resolved approaches, made possible by advanced synchrotron instrumentation, add a crucial dimension to many of these investigations. This article reviews experimental approaches in non-crystalline X-ray scattering and diffraction that may be used to illuminate important scientific questions such as protein/nucleic acid folding and structure-function relationships in large macromolecular assemblies.     

High-resolution electron cryomicroscopy of macromolecular assemblies

Electron cryomicroscopy is a high-resolution imaging technique that is particularly appropriate for the structural determination of large macromolecular assemblies, which are difficult to study by X-ray crystallography or NMR spectroscopy. For some biological molecules that form two-dimensional crystals, the application of electron cryomicroscopy and image reconstruction can help elucidate structures at atomic resolution. In instances where crystals cannot be formed, atomic-resolution information can be obtained by combining high-resolution structures of individual components determined by X-ray crystallography or NMR with image-derived reconstructions at moderate resolution. This can provide unique and crucial information on the mechanisms of these complexes. Finally, image reconstructions can be used to augment X-ray studies by providing initial models that facilitate phasing of crystals of large macromolecular machines such as ribosomes and viruses.     

Harvesting and Cryo-cooling Crystals of Membrane Proteins Grown in Lipidic Mesophases for Structure Determination by Macromolecular Crystallography

An important route to understanding how proteins function at a mechanistic level is to have the structure of the target protein available, ideally at atomic resolution. Presently, there is only one way to capture such information as applied to integral membrane proteins (Figure 1), and the complexes they form, and that method is macromolecular X-ray crystallography (MX). To do MX diffraction quality crystals are needed which, in the case of membrane proteins, do not form readily. A method for crystallizing membrane proteins that involves the use of lipidic mesophases, specifically the cubic and sponge phases^1-5, has gained considerable attention of late due to the successes it has had in the G protein-coupled receptor field^6-21 (www.mpdb.tcd.ie). However, the method, henceforth referred to as the in meso or lipidic cubic phase method, comes with its own technical challenges. These arise, in part, due to the generally viscous and sticky nature of the lipidic mesophase in which the crystals, which are often micro-crystals, grow. Manipulating crystals becomes difficult as a result and particularly so during harvesting^22,23. Problems arise too at the step that precedes harvesting which requires that the glass sandwich plates in which the crystals grow (Figure 2)^24,25 are opened to expose the mesophase bolus, and the crystals therein, for harvesting, cryo-cooling and eventual X-ray diffraction data collection.The cubic and sponge mesophase variants (Figure 3) from which crystals must be harvested have profoundly different rheologies^4,26. The cubic phase is viscous and sticky akin to a thick toothpaste. By contrast, the sponge phase is more fluid with a distinct tendency to flow. Accordingly, different approaches for opening crystallization wells containing crystals growing in the cubic and the sponge phase are called for as indeed different methods are required for harvesting crystals from the two mesophase types. Protocols for doing just that have been refined and implemented in the Membrane Structural and Functional Biology (MS&FB) Group, and are described in detail in this JoVE article (Figure 4). Examples are given of situations where crystals are successfully harvested and cryo-cooled. We also provide examples of cases where problems arise that lead to the irretrievable loss of crystals and describe how these problems can be avoided. In this article the Viewer is provided with step-by-step instructions for opening glass sandwich crystallization wells, for harvesting and for cryo-cooling crystals of membrane proteins growing in cubic and in sponge phases.     

New techniques in macromolecular cryocrystallography: macromolecular crystal annealing and cryogenic helium

Cryocrystallography is used today for almost all X-ray diffraction data collection at synchrotron beam lines, with rotating-anode generators, and micro X-ray sources. Despite the widespread use of flash-cooling to place macromolecular crystals in the cryogenic state, its use can ruin crystals, trips to the synchrotron, and sometimes even an entire project. Annealing of macromolecular crystals takes little time, requires no specialized equipment, and can save crystallographic projects that might otherwise end in failure. Annealing should be tried whenever initial flash-cooling causes an unacceptable increase in mosaicity, results in ice rings, fails to provide adequate diffraction quality, or causes a crystal to be positioned awkwardly. Overall, annealing improves the quality of data and overall success rate at synchrotron beam lines. Its use should be considered whenever problems arise with a flash-cooled crystal. Helium is a more efficient cryogen than nitrogen and will deliver lower temperatures. Experiments suggest that when crystals are cooled with He rather than N2, crystals maintain order and high-resolution data are less affected by increased radiation load. Individually or in combination, these two techniques can enhance the success of crystallographic data collection, and their use should be considered essential for high-throughput programs.     

Toward visualization of nanomachines in their native cellular environment

The cellular nanocosm is made up of numerous types of macromolecular complexes or biological nanomachines. These form functional modules that are organized into complex subcellular networks. Information on the ultra-structure of these nanomachines has mainly been obtained by analyzing isolated structures, using imaging techniques such as X-ray crystallography, NMR, or single particle electron microscopy (EM). Yet there is a strong need to image biological complexes in a native state and within a cellular environment, in order to gain a better understanding of their functions. Emerging methods in EM are now making this goal reachable. Cryo-electron tomography bypasses the need for conventional fixatives, dehydration and stains, so that a close-to-native environment is retained. As this technique is approaching macromolecular resolution, it is possible to create maps of individual macromolecular complexes. X-ray and NMR data can be ‘docked’ or fitted into the lower resolution particle density maps to create a macromolecular atlas of the cell under normal and pathological conditions. The majority of cells, however, are too thick to be imaged in an intact state and therefore methods such as ‘high pressure freezing’ with ‘freeze-substitution followed by room temperature plastic sectioning’ or ‘cryo-sectioning of unperturbed vitreous fully hydrated samples’ have been introduced for electron tomography. Here, we review methodological considerations for visualizing nanomachines in a close-to-physiological, cellular context. EM is in a renaissance, and further innovations and training in this field should be fully supported. Robert Feulgen Lecture 2009 presented at the 51st symposium of the Society for Histochemistry in Stubai, Austria, October 7–10, 2009.     

Macromolecular cryocrystallography--methods for cooling and mounting protein crystals at cryogenic temperatures

Cryocrystallography is routinely used in macromolecular crystallography laboratories. The main advantage of X-ray diffraction data collection near 100K is that crystals display much less radiation damage than seen at room temperature. Techniques and tools are described to facilitate cryoprotecting and flash-cooling crystals for data collection.     

How to avoid premature decay of your macromolecular crystal: a quick soak for long life

Radiation damage to biological samples is currently one of the major limiting factors in macromolecular X-ray crystallography, since it severely and irreversibly affects the quality of the data that can be obtained from a diffraction experiment. However, radiation damage can effectively be reduced by utilizing the electron and radical scavenging potential of certain small-molecule compounds. We propose an approach to protect macromolecular crystals prior to data collection by quick soaking with scavengers. This, in favorable cases, can more than double crystal lifetime in the X-ray beam. The approach has the potential to yield diffraction data of superior quality and hence to increase the amount of high-quality diffraction data and of structural information attainable from a single crystal.     

Evaluation of Meloxicam-Loaded Cationic Transfersomes as Transdermal Drug Delivery Carriers

The aim of this study is to develop meloxicam (MX)-loaded cationic transfersomes as skin delivery carriers and to investigate the influence of formulation factors such as cholesterol and cationic surfactants on the physicochemical properties of transfersomes (i.e., particle size, size distribution, droplet surface charge and morphology), entrapment efficiency, stability of formulations and in vitro skin permeation of MX. The transfersomes displayed a spherical structure. Their size, charge, and entrapment efficiency depended on the composition of cholesterol and cationic surfactants in the formulation. Transfersomes provided greater MX skin permeation than conventional liposomes and MX suspensions. The penetration-enhancing mechanism of skin permeation by the vesicles prepared in this study may be due to the vesicle adsorption to and/or fusion with the stratum corneum. Our results suggest that cationic transfersomes may be promising dermal delivery carriers of MX.