Plantar pressures are higher in cases with diabetic foot ulcers compared to controls despite a longer stance phase duration

Background

Current international guidelines advocate achieving at least a 30 % reduction in maximum plantar pressure to reduce the risk of foot ulcers in people with diabetes. However, whether plantar pressures differ in cases with foot ulcers to controls without ulcers is not clear. The aim of this study was to assess if plantar pressures were higher in patients with active plantar diabetic foot ulcers (cases) compared to patients with diabetes without a foot ulcer history (diabetes controls) and people without diabetes or a foot ulcer history (healthy controls).

Methods

Twenty-one cases with diabetic foot ulcers, 69 diabetes controls and 56 healthy controls were recruited for this case-control study. Plantar pressures at ten sites on both feet and stance phase duration were measured using a pre-established protocol. Primary outcomes were mean peak plantar pressure, pressure-time integral and stance phase duration. Non-parametric analyses were used with Holm’s correction to correct for multiple testing. Binary logistic regression models were used to adjust outcomes for age, sex and body mass index. Median differences with 95 % confidence intervals and Cohen’s d values (standardised mean difference) were reported for all significant outcomes.

Results

The majority of ulcers were located on the plantar surface of the hallux and toes. When adjusted for age, sex and body mass index, the mean peak plantar pressure and pressure-time integral of toes and the mid-foot were significantly higher in cases compared to diabetes and healthy controls (p?<?0.05). The stance phase duration was also significantly higher in cases compared to both control groups (p?<?0.05). The main limitations of the study were the small number of cases studied and the inability to adjust analyses for multiple factors.

Conclusions

This study shows that plantar pressures are higher in cases with active diabetic foot ulcers despite having a longer stance phase duration which would be expected to lower plantar pressure. Whether plantar pressure changes can predict ulcer healing should be the focus of future research. These results highlight the importance of offloading feet during active ulceration in addition to before ulceration.

     

Midtarsal break variation in modern humans: Functional causes,skeletal correlates,and paleontological implications

The midtarsal break was once treated as a dichotomous, non-overlapping trait present in the foot of non-human primates and absent in humans. Recent work indicates that there is considerable variation in human midfoot dorsiflexion, with some overlap with the ape foot. These findings have called into question the uniqueness of the human lateral midfoot, and the use of osteological features in fossil hominins to characterize the midfoot of our extinct ancestors. Here, we present data on plantar pressure and pedal mechanics in a large sample of adults and children (n = 671) to test functional hypotheses concerning variation in midfoot flexibility. Lateral midfoot peak plantar pressure correlates with both sagittal plane flexion at the lateral tarsometatarsal joint, and dorsiflexion at the hallucal metatarsophalangeal joint. The latter finding suggests that midfoot laxity may compromise hallucal propulsion. Multiple regression statistics indicate that a low arch and pronation of the foot explain 40% of variation in midfoot peak plantar pressure, independent of age and BMI. MRI scans on a small subset of study participants (n = 19) reveals that curvature of the base of the 4th metatarsal correlates with lateral midfoot plantar pressure and that specific anatomies of foot bones do indeed reflect relative midfoot flexibility. However, while the shape of the base of the 4th metatarsal may reliably reflect midfoot mobility in individual hominins, given the wide range of overlapping variation in midfoot flexibility in both apes and humans, we caution against generalizing foot function in extinct hominin species until larger fossils samples are available. Am J Phys Anthropol 156:543–552, 2015. © 2015 Wiley Periodicals, Inc.     

Brief communication: A midtarsal (midfoot) break in the human foot

The absence of a midtarsal break has long been regarded as a derived feature of the human foot. Humans possess a rigid midfoot that acts as an efficient lever during the propulsive phase of bipedal gait. Non‐human primates, in contrast, have a more mobile midfoot that is adaptive for tree climbing. Here, we report plantar pressure and video evidence that a small percentage of modern humans (n = 32/398) possess both elevated lateral midfoot pressures and even exhibit midfoot dorsiflexion characteristic of a midtarsal break. Those humans with a midtarsal break had on average a significantly flatter foot than those without. Midtarsal breakers also had significantly more medial weight transfer (pronation) during the stance phase of gait than those without this midfoot mobility. These data are in accordance with Elftman (Clin Orthop 16 (1960) 41–45) who suggested that pronation aligns the axes of the transverse tarsal joint, permitting elevated midfoot mobility. Am J Phys Anthropol 151:495–499, 2013.© 2013 Wiley Periodicals, Inc.     

An MRI-compatible foot-loading device for assessment of internal tissue deformation

It is well known that mechanical forces acting within the soft tissues of the foot can contribute to the formation of neuropathic ulcers in people with diabetes. Presently, only surface measurements of plantar pressure are used clinically to estimate risk status due to mechanical loading. It is currently not known how surface measurements relate to the three-dimensional (3-D) internal stress/strain state of the foot. This article describes the development of a foot-loading device that allows for the direct observation of the internal deformation of foot tissues under known forces. Ground reaction forces and plantar pressure distributions during normal walking were measured in ten healthy young adults. One instant in the gait cycle, when pressure under the metatarsal heads reached a peak, was extracted for simulation in an MR imager. T1-weighted 3-D gradient echo MRI sets were collected as the simulated walking ground reaction force was incrementally applied to the foot by the novel foot-loading device. The sub-metatarsal head soft-tissue thickness decreased rapidly at first and then reached a plateau. Peak plantar pressure measurements collected within the loading device (161+/-75kPa) were lower in magnitude and less focal than pressures measured during walking (492+/-91kPa). This finding implies that although the device successfully applied full peak walking ground reaction forces to the foot, they were not distributed in the same manner as during walking. Although not representative of gait, the data collected from this in vivo mechanical test are suitable for determination of foot tissue material properties or, when combined with finite element modeling, to examine the relationship between surface loading and internal stress.     

Predictors of Barefoot Plantar Pressure during Walking in Patients with Diabetes,Peripheral Neuropathy and a History of Ulceration

ObjectiveElevated dynamic plantar foot pressures significantly increase the risk of foot ulceration in diabetes mellitus. The aim was to determine which factors predict plantar pressures in a population of diabetic patients who are at high-risk of foot ulceration.MethodsPatients with diabetes, peripheral neuropathy and a history of ulceration were eligible for inclusion in this cross sectional study. Demographic data, foot structure and function, and disease-related factors were recorded and used as potential predictor variables in the analyses. Barefoot peak pressures during walking were calculated for the heel, midfoot, forefoot, lesser toes, and hallux regions. Potential predictors were investigated using multivariate linear regression analyses. 167 participants with mean age of 63 years contributed 329 feet to the analyses.ResultsThe regression models were able to predict between 6% (heel) and 41% (midfoot) of the variation in peak plantar pressures. The largest contributing factor in the heel model was glycosylated haemoglobin concentration, in the midfoot Charcot deformity, in the forefoot prominent metatarsal heads, in the lesser toes hammer toe deformity and in the hallux previous ulceration. Variables with local effects (e.g. foot deformity) were stronger predictors of plantar pressure than global features (e.g. body mass, age, gender, or diabetes duration).ConclusionThe presence of local deformity was the largest contributing factor to barefoot dynamic plantar pressure in high-risk diabetic patients and should therefore be adequately managed to reduce plantar pressure and ulcer risk. However, a significant amount of variance is unexplained by the models, which advocates the quantitative measurement of plantar pressures in the clinical risk assessment of the patient.     

Dynamic plantar pressure distribution during terrestrial locomotion of bonobos (Pan paniscus)

We collected high-resolution plantar pressure distributions of seven bonobos during terrestrial bipedal and quadrupedal locomotion (N = 146). Functional foot length, degree of hallux abduction, and total contact time were determined, and plots, showing pressure as a function of time for six different foot regions, were generated. We also studied five adult humans for comparison (N = 13). Both locomotion types of the bonobo show a large variation in plantar pressure distributions, which could be due to the interference of instantaneous behavior with locomotion and differences in walking speed and body dimensions. The heel and the lateral midfoot typically touch down simultaneously at initial ground contact in bipedal and quadrupedal walking of bonobos, in contrast with the typical heel-strike of human bipedalism. The center of pressure follows a curved course during quadrupedalism, as a consequence of the medial weight transfer during mid-stance. Bipedal locomotion of bonobos is characterized by a more plantar positioning of the feet and by a shorter contact time than during quadrupedal walking, according to a smaller stride and step length at a higher frequency. We observed a varus position of the foot with an abducted hallux, which likely possesses an important sustaining and stabilizing function during terrestrial locomotion.     

Modified pressure distribution patterns in walking following reduction of plantar sensation

The aim of the present study was to investigate the influence of reduced plantar sensation on pressure distribution patterns during gait of 40 healthy subjects (25.3+/-3.3 yr, 70.8+/-10.6 kg and 176.5+/-7.8 cm) with no history of sensory disorders. Plantar sensation in the subjects was reduced by using an ice immersion approach, and reduced sensitivity was tested with Semmes-Weinstein monofilaments. All subjects performed six trials of barefoot walking over a pressure distribution platform under normal as well as iced conditions. Plantar cutaneous sensation was significantly reduced after the cooling procedure (p<0.0001). Pressure distribution analysis showed substantially modified plantar pressure distribution patterns during the roll-over process (ROP) under iced conditions. Analysis of peak pressures revealed significant reductions under the toes and under the heel (p<0.001). The contact time and the relative impulse for the whole foot did not change significantly between the two conditions. For the different areas, a significant load shift from the heel and toes towards the central and lateral forefoot and the lateral midfoot was observed. The results indicate the strong influence of reduced afferent information of the sole of the foot on the ROP in walking.     

Simple finite element models for use in the design of therapeutic footwear

Therapeutic footwear is frequently prescribed in cases of rheumatoid arthritis and diabetes to relieve or redistribute high plantar pressures in the region of the metatarsal heads. Few guidelines exist as to how these interventions should be designed and what effect such interventions actually have on the plantar pressure distribution. Finite element analysis has the potential to assist in the design process by refining a given intervention or identifying an optimal intervention without having to actually build and test each condition. However, complete and detailed foot models based on medical image segmentation have proven time consuming to build and computationally expensive to solve, hindering their utility in practice. Therefore, the goal of the current work was to determine if a simplified patient-specific model could be used to assist in the design of foot orthoses to reduce the plantar pressure in the metatarsal head region. The approach is illustrated by a case study of a diabetic patient experiencing high pressures and pain over the fifth metatarsal head. The simple foot model was initially calibrated by adjusting the individual loads on the metatarsals to approximate measured peak plantar pressure distributions in the barefoot condition to within 3%. This loading was used in various shod conditions to identify an effective orthosis. Model results for metatarsal pads were considerably higher than measured values but predictions for uniform surfaces were generally within 16% of measured values. The approach enabled virtual prototyping of the orthoses, identifying the most favorable approach to redistribute the patient’s plantar pressures.     

Real-time subject-specific monitoring of internal deformations and stresses in the soft tissues of the foot: a new approach in gait analysis

No technology is presently available to provide real-time information on internal deformations and stresses in plantar soft tissues of individuals during evaluation of the gait pattern. Because internal deformations and stresses in the plantar pad are critical factors in foot injuries such as diabetic foot ulceration, this severely limits evaluation of patients. To allow such real-time subject-specific analysis, we developed a hierarchal modeling system which integrates a two-dimensional gross structural model of the foot (high-order model) with local finite element (FE) models of the plantar tissue padding the calcaneus and medial metatarsal heads (low-order models). The high-order whole-foot model provides real-time analytical evaluations of the time-dependent plantar fascia tensile forces during the stance phase. These force evaluations are transferred, together with foot-shoe local reaction forces, also measured in real time (under the calcaneus, medial metatarsals and hallux), to the low-order FE models of the plantar pad, where they serve as boundary conditions for analyses of local deformations and stresses in the plantar pad. After careful verification of our custom-made FE solver and of our foot model system with respect to previous literature and against experimental results from a synthetic foot phantom, we conducted human studies in which plantar tissue loading was evaluated in real time during treadmill gait in healthy individuals (N = 4). We concluded that internal deformations and stresses in the plantar pad during gait cannot be predicted from merely measuring the foot-shoe force reactions. Internal loading of the plantar pad is constituted by a complex interaction between the anatomical structure and mechanical behavior of the foot skeleton and soft tissues, the body characteristics, the gait pattern and footwear. Real-time FE monitoring of internal deformations and stresses in the plantar pad is therefore required to identify elevated deformation/stress exposures toward utilizing it in gait laboratories to protect feet that are susceptible to injury.     

Development of a patient-specific anatomical foot model from structured light scan data

The use of anatomically accurate finite element (FE) models of the human foot in research studies has increased rapidly in recent years. Uses for FE foot models include advancing knowledge of orthotic design, shoe design, ankle–foot orthoses, pathomechanics, locomotion, plantar pressure, tissue mechanics, plantar fasciitis, joint stress and surgical interventions. Similar applications but for clinical use on a per-patient basis would also be on the rise if it were not for the high costs associated with developing patient-specific anatomical foot models. High costs arise primarily from the expense and challenges of acquiring anatomical data via magnetic resonance imaging (MRI) or computed tomography (CT) and reconstructing the three-dimensional models. The proposed solution morphs detailed anatomy from skin surface geometry and anatomical landmarks of a generic foot model (developed from CT or MRI) to surface geometry and anatomical landmarks acquired from an inexpensive structured light scan of a foot. The method yields a patient-specific anatomical foot model at a fraction of the cost of standard methods. Average error for bone surfaces was 2.53 mm for the six experiments completed. Highest accuracy occurred in the mid-foot and lowest in the forefoot due to the small, irregular bones of the toes. The method must be validated in the intended application to determine if the resulting errors are acceptable.     

Parametric study of orthopedic insole of valgus foot on partial foot amputation

Orthopedic insole was important for partial foot amputation (PFA) to achieve foot balance and avoid foot deformity. The inapposite insole orthosis was thought to be one of the risk factors of reamputation for foot valgus patient, but biomechanical effects of internal tissues on valgus foot had not been clearly addressed. In this study, plantar pressure on heel and metatarsal regions of PFA was measured using F-Scan. The three-dimensional finite element (FE) model of partial foot evaluated different medial wedge angles (MWAs) (0.0°–10.0°) of orthopedic insole on valgus foot. The effect of orthopedic insole on the internal bone stress, the medial ligament tension of ankle, plantar fascia tension, and plantar pressure was investigated. Plantar pressure on medial heel region was about 2.5 times higher than that of lateral region based on the F-Scan measurements. FE-predicted results showed that the tension of medial ankle ligaments was the lowest, and the plantar pressure was redistributed around the heel, the first metatarsal, and the lateral longitudinal arch regions when MWA of orthopedic insole ranged from 7.5° to 8.0°. The plantar fascias maintained about 3.5% of the total load bearing on foot. However, the internal stresses from foot bones increased. The simulation in this study would provide the suggestion of guiding optimal design of orthopedic insole and therapeutic planning to pedorthist.     

Subject-specific finite element modelling of the human foot complex during walking: sensitivity analysis of material properties,boundary and loading conditions

The objective of this study was to develop and validate a subject-specific framework for modelling the human foot. This was achieved by integrating medical image-based finite element modelling, individualised multi-body musculoskeletal modelling and 3D gait measurements. A 3D ankle–foot finite element model comprising all major foot structures was constructed based on MRI of one individual. A multi-body musculoskeletal model and 3D gait measurements for the same subject were used to define loading and boundary conditions. Sensitivity analyses were used to investigate the effects of key modelling parameters on model predictions. Prediction errors of average and peak plantar pressures were below 10% in all ten plantar regions at five key gait events with only one exception (lateral heel, in early stance, error of 14.44%). The sensitivity analyses results suggest that predictions of peak plantar pressures are moderately sensitive to material properties, ground reaction forces and muscle forces, and significantly sensitive to foot orientation. The maximum region-specific percentage change ratios (peak stress percentage change over parameter percentage change) were 1.935–2.258 for ground reaction forces, 1.528–2.727 for plantar flexor muscles and 4.84–11.37 for foot orientations. This strongly suggests that loading and boundary conditions need to be very carefully defined based on personalised measurement data.     

A Dynamic Finite Element Analysis of Human Foot Complex in the Sagittal Plane during Level Walking

The objective of this study is to develop a computational framework for investigating the dynamic behavior and the internal loading conditions of the human foot complex during locomotion. A subject-specific dynamic finite element model in the sagittal plane was constructed based on anatomical structures segmented from medical CT scan images. Three-dimensional gait measurements were conducted to support and validate the model. Ankle joint forces and moment derived from gait measurements were used to drive the model. Explicit finite element simulations were conducted, covering the entire stance phase from heel-strike impact to toe-off. The predicted ground reaction forces, center of pressure, foot bone motions and plantar surface pressure showed reasonably good agreement with the gait measurement data over most of the stance phase. The prediction discrepancies can be explained by the assumptions and limitations of the model. Our analysis showed that a dynamic FE simulation can improve the prediction accuracy in the peak plantar pressures at some parts of the foot complex by 10%–33% compared to a quasi-static FE simulation. However, to simplify the costly explicit FE simulation, the proposed model is confined only to the sagittal plane and has a simplified representation of foot structure. The dynamic finite element foot model proposed in this study would provide a useful tool for future extension to a fully muscle-driven dynamic three-dimensional model with detailed representation of all major anatomical structures, in order to investigate the structural dynamics of the human foot musculoskeletal system during normal or even pathological functioning.     

The extensibility of the plantar fascia influences the windlass mechanism during human running

The arch of the human foot is unique among hominins as it is compliant at ground contact but sufficiently stiff to enable push-off. These behaviours are partly facilitated by the ligamentous plantar fascia whose role is central to two mechanisms. The ideal windlass mechanism assumes that the plantar fascia has a nearly constant length to directly couple toe dorsiflexion with a change in arch shape. However, the plantar fascia also stretches and then shortens throughout gait as the arch-spring stores and releases elastic energy. We aimed to understand how the extensible plantar fascia could behave as an ideal windlass when it has been shown to strain throughout gait, potentially compromising the one-to-one coupling between toe arc length and arch length. We measured foot bone motion and plantar fascia elongation using high-speed X-ray during running. We discovered that toe plantarflexion delays plantar fascia stretching at foot strike, which probably modifies the distribution of the load through other arch tissues. Through a pure windlass effect in propulsion, a quasi-isometric plantar fascia''s shortening is delayed to later in stance. The plantar fascia then shortens concurrently to the windlass mechanism, likely enhancing arch recoil at push-off.     

A Coupling Analysis of the Biomechanical Functions of Human Foot Complex during Locomotion

This study represents a functional analysis of the human foot complex based on in-vivo gait measurements, finite element (FE) modeling and biological coupling theory, with the objective of achieving a comprehensive understanding of the impact attenuation and energy absorption functions of the human foot complex. A simplified heel pad FE model comprising reticular fiber structure and fat cells was constructed based on the foot pad Magnetic Resonance (MR) images. The model was then used to investigate the foot pad behaviors under impact during locomotion. Three-dimensional (3D) gait measurement and a 3D FE foot model comprising 29 bones, 85 ligaments and the plantar soft tissues were used to investigate the foot arch and plantar fascia deformations in mid-stance phase. The heel pad simulation results show that the pad model with fat cells (coupling model) has much stronger capacity in impact attenuation and energy storage than the model without fat cells (structure model). Furthermore, the FE simulation reproduced the deformations of the foot arch structure and the plantar fascia extension observed in the gait measurements, which reinforces the postulation that the foot arch structure also plays an important role in energy absorption during locomotion. Finally, the coupling mechanism of the human foot functions in impact attenuation and energy absorption was proposed.     

Flat Feet,Happy Feet? Comparison of the Dynamic Plantar Pressure Distribution and Static Medial Foot Geometry between Malawian and Dutch Adults

In contrast to western countries, foot complaints are rare in Africa. This is remarkable, as many African adults walk many hours each day, often barefoot or with worn-out shoes. The reason why Africans can withstand such loading without developing foot complaints might be related to the way the foot is loaded. Therefore, static foot geometry and dynamic plantar pressure distribution of 77 adults from Malawi were compared to 77 adults from the Netherlands. None of the subjects had a history of foot complaints. The plantar pressure pattern as well as the Arch Index (AI) and the trajectory of the center of pressure during the stance phase were calculated and compared between both groups. Standardized pictures were taken from the feet to assess the height of the Medial Longitudinal Arch (MLA). We found that Malawian adults: (1) loaded the midfoot for a longer and the forefoot for a shorter period during roll off, (2) had significantly lower plantar pressures under the heel and a part of the forefoot, and (3) had a larger AI and a lower MLA compared to the Dutch. These findings demonstrate that differences in static foot geometry, foot loading, and roll off technique exist between the two groups. The advantage of the foot loading pattern as shown by the Malawian group is that the plantar pressure is distributed more equally over the foot. This might prevent foot complaints.     

Scaling of plantar pressures in mammals

The interaction of the limbs with the substrate can teach a lot about an animal's gait mechanics. Unlike ground-reaction forces, plantar pressure distributions are rarely studied in animals, but they may provide more detailed information about the loading patterns and locomotor function of specific anatomical structures. With this study, we aim to describe pressures for a large and diverse sample of mammalian species, focusing on scaling effects. We collected dynamic plantar pressure distributions during voluntary walking in 28 mammal species. A dynamic classification of foot use was made, which distinguished between plantiportal, digitiportal and unguliportal animals. Analysis focused on scaling effects of peak pressures, peak forces and foot contact areas. Peak pressure for the complete mammal sample was found to scale to (mass)^1/2, higher than predicted assuming geometric similarity, and we found no difference between the different types of foot use. Only the scaling of peak force is dependent on the dynamic foot use. We conclude that plantar peak pressure rises faster with mass than expected, regardless of the type of foot use, and scales higher than in limb bones. These results might explain some anatomical and behavioural adaptations in graviportal animals.     

Understanding the evolution of the windlass mechanism of the human foot from comparative anatomy: Insights,obstacles, and future directions

Humans stand alone from other primates in that we propel our bodies forward on a relatively stiff and arched foot and do so by employing an anatomical arrangement of bones and ligaments in the foot that can operate like a “windlass.” This is a significant evolutionary innovation, but it is currently unknown when during hominin evolution this mechanism developed and within what genera or species it originated. The presence of recently discovered fossils along with novel research in the past two decades have improved our understanding of foot mechanics in humans and other apes, making it possible to consider this question more fully. Here we review the main elements thought to be involved in the production of an effective, modern human‐like windlass mechanism. These elements are the triceps surae, plantar aponeurosis, medial longitudinal arch, and metatarsophalangeal joints. We discuss what is presently known about the evolution of these features and the challenges associated with identifying each of these specific components and/or their function in living and extinct primates for the purpose of predicting the presence of the windlass mechanism in our ancestors. In some cases we recommend alternative pathways for inferring foot mechanics and for testing the hypothesis that the windlass mechanism evolved to increase the speed and energetic efficiency of bipedal gait in hominins. Am J Phys Anthropol 156:1–10, 2015 © 2014 Wiley Periodicals, Inc.     

An In Vivo Experimental Validation of a Computational Model of Human Foot

Reliable computational foot models offer an alternative means to enhance knowledge on the biomechanics of human foot.Model validation is one of the most critical aspects of the entire foot modeling and analysis process.This paper presents an invivo experiment combining motion capture system and plantar pressure measure platform to validate a three-dimensional finiteelement model of human foot.The Magnetic Resonance Imaging(MRI)slices for the foot modeling and the experimental datafor validation were both collected from the same volunteer subject.The validated components included the comparison of staticmodel predictions of plantar force,plantar pressure and foot surface deformation during six loading conditions,to equivalentmeasured data.During the whole experiment,foot surface deformation,plantar force and plantar pressure were recorded simultaneouslyduring six different loaded standing conditions.The predictions of the current FE model were in good agreementwith these experimental results.     

Elevated plantar pressures in neuropathic diabetic patients with claw/hammer toe deformity

Elevated plantar foot pressures during gait in diabetic patients with neuropathy have been suggested to result, among other factors, from the distal displacement of sub-metatarsal head (MTH) fat-pad cushions caused by to claw/hammer toe deformity. The purpose of this study was to quantitatively assess these associations. Thirteen neuropathic diabetic subjects with claw/hammer toe deformity, and 13 age- and gender-matched neuropathic diabetic controls without deformity, were examined. Dynamic barefoot plantar pressures were measured with an EMED pressure platform. Peak pressure and force-time integral for each of 11 foot regions were calculated. Degree of toe deformity and the ratio of sub-MTH to sub-phalangeal fat-pad thickness (indicating fat-pad displacement) were measured from sagittal plane magnetic resonance images of the foot. Peak pressures at the MTHs were significantly higher in the patients with toe deformity (mean 626 (SD 260)kPa) when compared with controls (mean 363 (SD 115) kPa, P<0.005). MTH peak pressure was significantly correlated with degree of toe deformity (r=-0.74) and with fat-pad displacement (r=-0.71) (P<0.001). The ratio of force-time integral in the toes and the MTHs (toe-loading index) was significantly lower in the group with deformity. These results show that claw/hammer toe deformity is associated with a distal-to-proximal transfer of load in the forefoot and elevated plantar pressures at the MTHs in neuropathic diabetic patients. Distal displacement of the plantar fat pad is suggested to be the underlying mechanism in this association. These conditions increase the risk for plantar ulceration in these patients.