Are protein–protein interfaces more conserved in sequence than the rest of the protein surface?

Protein interfaces are thought to be distinguishable from the rest of the protein surface by their greater degree of residue conservation. We test the validity of this approach on an expanded set of 64 protein-protein interfaces using conservation scores derived from two multiple sequence alignment types, one of close homologs/orthologs and one of diverse homologs/paralogs. Overall, we find that the interface is slightly more conserved than the rest of the protein surface when using either alignment type, with alignments of diverse homologs showing marginally better discrimination. However, using a novel surface-patch definition, we find that the interface is rarely significantly more conserved than other surface patches when using either alignment type. When an interface is among the most conserved surface patches, it tends to be part of an enzyme active site. The most conserved surface patch overlaps with 39% (+/- 28%) and 36% (+/- 28%) of the actual interface for diverse and close homologs, respectively. Contrary to results obtained from smaller data sets, this work indicates that residue conservation is rarely sufficient for complete and accurate prediction of protein interfaces. Finally, we find that obligate interfaces differ from transient interfaces in that the former have significantly fewer alignment gaps at the interface than the rest of the protein surface, as well as having buried interface residues that are more conserved than partially buried interface residues.     

Prediction of interface residues in protein-protein complexes by a consensus neural network method: test against NMR data

The number of structures of protein-protein complexes deposited to the Protein Data Bank is growing rapidly. These structures embed important information for predicting structures of new protein complexes. This motivated us to develop the PPISP method for predicting interface residues in protein-protein complexes. In PPISP, sequence profiles and solvent accessibility of spatially neighboring surface residues were used as input to a neural network. The network was trained on native interface residues collected from the Protein Data Bank. The prediction accuracy at the time was 70% with 47% coverage of native interface residues. Now we have extensively improved PPISP. The training set now consisted of 1156 nonhomologous protein chains. Test on a set of 100 nonhomologous protein chains showed that the prediction accuracy is now increased to 80% with 51% coverage. To solve the problem of over-prediction and under-prediction associated with individual neural network models, we developed a consensus method that combines predictions from multiple models with different levels of accuracy and coverage. Applied on a benchmark set of 68 proteins for protein-protein docking, the consensus approach outperformed the best individual models by 3-8 percentage points in accuracy. To demonstrate the predictive power of cons-PPISP, eight complex-forming proteins with interfaces characterized by NMR were tested. These proteins are nonhomologous to the training set and have a total of 144 interface residues identified by chemical shift perturbation. cons-PPISP predicted 174 interface residues with 69% accuracy and 47% coverage and promises to complement experimental techniques in characterizing protein-protein interfaces. .     

Residue conservation in viral capsid assembly

To evaluate the evolutionary constraints placed on viral proteins by the structure and assembly of the capsid, we calculate Shannon entropies in the aligned sequences of 45 polypeptide chains in 32 icosahedral viruses, and relate these entropies to the residue location in the three-dimensional structure of the capsids. Three categories of residues have entropies lower than the chain average implying that they are better conserved than average: residues that are buried within a subunit (the protein core), residues that contain atoms buried at an interface between subunits (the interface core), and residues that contribute to several such interfaces. The interface core is also conserved in homomeric proteins and in transient protein-protein complexes, which have only one interface whereas capsids have many. In capsids, the subunit interfaces implicate most of the polypeptide chain: on average, 66% of the capsid residues are at an interface, 34% at more than one, and 47% at the interface core. Nevertheless, we observe that the degree of residue conservation can vary widely between interfaces within a capsid and between regions within an interface. The interfaces and regions of interfaces that show a low sequence variability are likely to play major roles in the self-assembly of the capsid, with implications on its mechanism that we discuss taking adeno-associated virus as an example.     

Charged residues at protein interaction interfaces: unexpected conservation and orchestrated divergence

Protein-protein interactions play an essential role in the functioning of cell. The importance of charged residues and their diverse role in protein-protein interactions have been well studied using experimental and computational methods. Often, charged residues located in protein interaction interfaces are conserved across the families of homologous proteins and protein complexes. However, on a large scale, it has been recently shown that charged residues are significantly less conserved than other residue types in protein interaction interfaces. The goal of this work is to understand the role of charged residues in the protein interaction interfaces through their conservation patterns. Here, we propose a simple approach where the structural conservation of the charged residue pairs is analyzed among the pairs of homologous binary complexes. Specifically, we determine a large set of homologous interactions using an interaction interface similarity measure and catalog the basic types of conservation patterns among the charged residue pairs. We find an unexpected conservation pattern, which we call the correlated reappearance, occurring among the pairs of homologous interfaces more frequently than the fully conserved pairs of charged residues. Furthermore, the analysis of the conservation patterns across different superkingdoms as well as structural classes of proteins has revealed that the correlated reappearance of charged residues is by far the most prevalent conservation pattern, often occurring more frequently than the unconserved charged residues. We discuss a possible role that the new conservation pattern may play in the long-range electrostatic steering effect.     

Structural similarity and classification of protein interaction interfaces

Interactions between proteins play a key role in many cellular processes. Studying protein-protein interactions that share similar interaction interfaces may shed light on their evolution and could be helpful in elucidating the mechanisms behind stability and dynamics of the protein complexes. When two complexes share structurally similar subunits, the similarity of the interaction interfaces can be found through a structural superposition of the subunits. However, an accurate detection of similarity between the protein complexes containing subunits of unrelated structure remains an open problem. Here, we present an alignment-free machine learning approach to measure interface similarity. The approach relies on the feature-based representation of protein interfaces and does not depend on the superposition of the interacting subunit pairs. Specifically, we develop an SVM classifier of similar and dissimilar interfaces and derive a feature-based interface similarity measure. Next, the similarity measure is applied to a set of 2,806×2,806 binary complex pairs to build a hierarchical classification of protein-protein interactions. Finally, we explore case studies of similar interfaces from each level of the hierarchy, considering cases when the subunits forming interactions are either homologous or structurally unrelated. The analysis has suggested that the positions of charged residues in the homologous interfaces are not necessarily conserved and may exhibit more complex conservation patterns.     

The Subunit Interfaces of Weakly Associated Homodimeric Proteins

We analyzed subunit interfaces in 315 homodimers with an X-ray structure in the Protein Data Bank, validated by checking the literature for data that indicate that the proteins are dimeric in solution and that, in the case of the “weak” dimers, the homodimer is in equilibrium with the monomer. The interfaces of the 42 weak dimers, which are smaller by a factor of 2.4 on average than in the remainder of the set, are comparable in size with antibody-antigen or protease-inhibitor interfaces. Nevertheless, they are more hydrophobic than in the average transient protein-protein complex and similar in amino acid composition to the other homodimer interfaces. The mean numbers of interface hydrogen bonds and hydration water molecules per unit area are also similar in homodimers and transient complexes. Parameters related to the atomic packing suggest that many of the weak dimer interfaces are loosely packed, and we suggest that this contributes to their low stability. To evaluate the evolutionary selection pressure on interface residues, we calculated the Shannon entropy of homologous amino acid sequences at 60% sequence identity. In 93% of the homodimers, the interface residues are better conserved than the residues on the protein surface. The weak dimers display the same high degree of interface conservation as other homodimers, but their homologs may be heterodimers as well as homodimers. Their interfaces may be good models in terms of their size, composition, and evolutionary conservation for the labile subunit contacts that allow protein assemblies to share and exchange components, allosteric proteins to undergo quaternary structure transitions, and molecular machines to operate in the cell.     

Protein-DNA interactions: structural, thermodynamic and clustering patterns of conserved residues in DNA-binding proteins

Amino acid residues, which play important roles in protein function, are often conserved. Here, we analyze thermodynamic and structural data of protein-DNA interactions to explore a relationship between free energy, sequence conservation and structural cooperativity. We observe that the most stabilizing residues or putative hotspots are those which occur as clusters of conserved residues. The higher packing density of the clusters and available experimental thermodynamic data of mutations suggest cooperativity between conserved residues in the clusters. Conserved singlets contribute to the stability of protein-DNA complexes to a lesser extent. We also analyze structural features of conserved residues and their clusters and examine their role in identifying DNA-binding sites. We show that about half of the observed conserved residue clusters are in the interface with the DNA, which could be identified from their amino acid composition; whereas the remaining clusters are at the protein-protein or protein-ligand interface, or embedded in the structural scaffolds. In protein-protein interfaces, conserved residues are highly correlated with experimental residue hotspots, contributing dominantly and often cooperatively to the stability of protein-protein complexes. Overall, the conservation patterns of the stabilizing residues in DNA-binding proteins also highlight the significance of clustering as compared to single residue conservation.     

Conservation of polar residues as hot spots at protein interfaces

A number of studies have addressed the question of which are the critical residues at protein-binding sites. These studies examined either a single or a few protein-protein interfaces. The most extensive study to date has been an analysis of alanine-scanning mutagenesis. However, although the total number of mutations was large, the number of protein interfaces was small, with some of the interfaces closely related. Here we show that although overall binding sites are hydrophobic, they are studded with specific, conserved polar residues at specific locations, possibly serving as energy "hot spots." Our results confirm and generalize the alanine-scanning data analysis, despite its limited size. Previously Trp, Arg, and Tyr were shown to constitute energetic hot spots. These were rationalized by their polar interactions and by their surrounding rings of hydrophobic residues. However, there was no compelling reason as to why specifically these residues were conserved. Here we show that other polar residues are similarly conserved. These conserved residues have been detected consistently in all interface families that we have examined. Our results are based on an extensive examination of residues which are in contact across protein interfaces. We utilize all clustered interface families with at least five members and with sequence similarity between the members in the range of 20-90%. There are 11 such clustered interface families, comprising a total of 97 crystal structures. Our three-dimensional superpositioning analysis of the occurrences of matched residues in each of the families identifies conserved residues at spatially similar environments. Additionally, in enzyme inhibitors, we observe that residues are more conserved at the interfaces than at other locations. On the other hand, antibody-protein interfaces have similar surface conservation as compared to their corresponding linear sequence alignment, consistent with the suggestion that evolution has optimized protein interfaces for function.     

Protein-protein interactions; coupling of structurally conserved residues and of hot spots across interfaces. Implications for docking

Hot spot residues contribute dominantly to protein-protein interactions. Statistically, conserved residues correlate with hot spots, and their occurrence can distinguish between binding sites and the remainder of the protein surface. The hot spot and conservation analyses have been carried out on one side of the interface. Here, we show that both experimental hot spots and conserved residues tend to couple across two-chain interfaces. Intriguingly, the local packing density around both hot spots and conserved residues is higher than expected. We further observe a correlation between local packing density and experimental deltadeltaG. Favorable conserved pairs include Gly coupled with aromatics, charged and polar residues, as well as aromatic residue coupling. Remarkably, charged residue couples are underrepresented. Overall, protein-protein interactions appear to consist of regions of high and low packing density, with the hot spots organized in the former. The high local packing density in binding interfaces is reminiscent of protein cores.     

A novel method for protein-protein interaction site prediction using phylogenetic substitution models

Protein-protein binding events mediate many critical biological functions in the cell. Typically, functionally important sites in proteins can be well identified by considering sequence conservation. However, protein-protein interaction sites exhibit higher sequence variation than other functional regions, such as catalytic sites of enzymes. Consequently, the mutational behavior leading to weak sequence conservation poses significant challenges to the protein-protein interaction site prediction. Here, we present a phylogenetic framework to capture critical sequence variations that favor the selection of residues essential for protein-protein binding. Through the comprehensive analysis of diverse protein families, we show that protein binding interfaces exhibit distinct amino acid substitution as compared with other surface residues. On the basis of this analysis, we have developed a novel method, BindML, which utilizes the substitution models to predict protein-protein binding sites of protein with unknown interacting partners. BindML estimates the likelihood that a phylogenetic tree of a local surface region in a query protein structure follows the substitution patterns of protein binding interface and nonbinding surfaces. BindML is shown to perform well compared to alternative methods for protein binding interface prediction. The methodology developed in this study is very versatile in the sense that it can be generally applied for predicting other types of functional sites, such as DNA, RNA, and membrane binding sites in proteins.     

Protein-protein interaction hotspots carved into sequences

Protein-protein interactions, a key to almost any biological process, are mediated by molecular mechanisms that are not entirely clear. The study of these mechanisms often focuses on all residues at protein-protein interfaces. However, only a small subset of all interface residues is actually essential for recognition or binding. Commonly referred to as "hotspots," these essential residues are defined as residues that impede protein-protein interactions if mutated. While no in silico tool identifies hotspots in unbound chains, numerous prediction methods were designed to identify all the residues in a protein that are likely to be a part of protein-protein interfaces. These methods typically identify successfully only a small fraction of all interface residues. Here, we analyzed the hypothesis that the two subsets correspond (i.e., that in silico methods may predict few residues because they preferentially predict hotspots). We demonstrate that this is indeed the case and that we can therefore predict directly from the sequence of a single protein which residues are interaction hotspots (without knowledge of the interaction partner). Our results suggested that most protein complexes are stabilized by similar basic principles. The ability to accurately and efficiently identify hotspots from sequence enables the annotation and analysis of protein-protein interaction hotspots in entire organisms and thus may benefit function prediction and drug development. The server for prediction is available at http://www.rostlab.org/services/isis.     

ISIS: interaction sites identified from sequence

MOTIVATION: Large-scale experiments reveal pairs of interacting proteins but leave the residues involved in the interactions unknown. These interface residues are essential for understanding the mechanism of interaction and are often desired drug targets. Reliable identification of residues that reside in protein-protein interface typically requires analysis of protein structure. Therefore, for the vast majority of proteins, for which there is no high-resolution structure, there is no effective way of identifying interface residues. RESULTS: Here we present a machine learning-based method that identifies interacting residues from sequence alone. Although the method is developed using transient protein-protein interfaces from complexes of experimentally known 3D structures, it never explicitly uses 3D information. Instead, we combine predicted structural features with evolutionary information. The strongest predictions of the method reached over 90% accuracy in a cross-validation experiment. Our results suggest that despite the significant diversity in the nature of protein-protein interactions, they all share common basic principles and that these principles are identifiable from sequence alone.     

Statistical analysis and prediction of protein-protein interfaces

Predicting protein-protein interfaces from a three-dimensional structure is a key task of computational structural proteomics. In contrast to geometrically distinct small molecule binding sites, protein-protein interface are notoriously difficult to predict. We generated a large nonredundant data set of 1494 true protein-protein interfaces using biological symmetry annotation where necessary. The data set was carefully analyzed and a Support Vector Machine was trained on a combination of a new robust evolutionary conservation signal with the local surface properties to predict protein-protein interfaces. Fivefold cross validation verifies the high sensitivity and selectivity of the model. As much as 97% of the predicted patches had an overlap with the true interface patch while only 22% of the surface residues were included in an average predicted patch. The model allowed the identification of potential new interfaces and the correction of mislabeled oligomeric states.     

Expression cartography of human tissues using self organizing maps

Background

Although homology-based methods are among the most widely used methods for predicting the structure and function of proteins, the question as to whether interface sequence conservation can be effectively exploited in predicting protein-protein interfaces has been a subject of debate.

Results

We studied more than 300,000 pair-wise alignments of protein sequences from structurally characterized protein complexes, including both obligate and transient complexes. We identified sequence similarity criteria required for accurate homology-based inference of interface residues in a query protein sequence. Based on these analyses, we developed HomPPI, a class of sequence homology-based methods for predicting protein-protein interface residues. We present two variants of HomPPI: (i) NPS-HomPPI (Non partner-specific HomPPI), which can be used to predict interface residues of a query protein in the absence of knowledge of the interaction partner; and (ii) PS-HomPPI (Partner-specific HomPPI), which can be used to predict the interface residues of a query protein with a specific target protein. Our experiments on a benchmark dataset of obligate homodimeric complexes show that NPS-HomPPI can reliably predict protein-protein interface residues in a given protein, with an average correlation coefficient (CC) of 0.76, sensitivity of 0.83, and specificity of 0.78, when sequence homologs of the query protein can be reliably identified. NPS-HomPPI also reliably predicts the interface residues of intrinsically disordered proteins. Our experiments suggest that NPS-HomPPI is competitive with several state-of-the-art interface prediction servers including those that exploit the structure of the query proteins. The partner-specific classifier, PS-HomPPI can, on a large dataset of transient complexes, predict the interface residues of a query protein with a specific target, with a CC of 0.65, sensitivity of 0.69, and specificity of 0.70, when homologs of both the query and the target can be reliably identified. The HomPPI web server is available at http://homppi.cs.iastate.edu/.

Conclusions

Sequence homology-based methods offer a class of computationally efficient and reliable approaches for predicting the protein-protein interface residues that participate in either obligate or transient interactions. For query proteins involved in transient interactions, the reliability of interface residue prediction can be improved by exploiting knowledge of putative interaction partners.     

Predicting protein-protein interactions on a proteome scale by matching evolutionary and structural similarities at interfaces using PRISM

Prediction of protein-protein interactions at the structural level on the proteome scale is important because it allows prediction of protein function, helps drug discovery and takes steps toward genome-wide structural systems biology. We provide a protocol (termed PRISM, protein interactions by structural matching) for large-scale prediction of protein-protein interactions and assembly of protein complex structures. The method consists of two components: rigid-body structural comparisons of target proteins to known template protein-protein interfaces and flexible refinement using a docking energy function. The PRISM rationale follows our observation that globally different protein structures can interact via similar architectural motifs. PRISM predicts binding residues by using structural similarity and evolutionary conservation of putative binding residue 'hot spots'. Ultimately, PRISM could help to construct cellular pathways and functional, proteome-scale annotation. PRISM is implemented in Python and runs in a UNIX environment. The program accepts Protein Data Bank-formatted protein structures and is available at http://prism.ccbb.ku.edu.tr/prism_protocol/.     

Molecular principles of the interactions of disordered proteins

Thorough knowledge of the molecular principles of protein-protein recognition is essential to our understanding of protein function at the cellular level. Whereas interactions of ordered proteins have been analyzed in great detail, complexes of intrinsically unstructured/disordered proteins (IUPs) have hardly been addressed so far. Here, we have collected a database of 39 complexes of experimentally verified IUPs, and compared their interfaces with those of 72 complexes of ordered, globular proteins. The characteristic differences found between the two types of complexes suggest that IUPs represent a distinct molecular implementation of the principles of protein-protein recognition. The interfaces do not differ in size, but those of IUPs cover a much larger part of the surface of the protein than for their ordered counterparts. Moreover, IUP interfaces are significantly more hydrophobic relative to their overall amino acid composition, but also in absolute terms. They rely more on hydrophobic-hydrophobic than on polar-polar interactions. Their amino acids in the interface realize more intermolecular contacts, which suggests a better fit with the partner due to induced folding upon binding that results in a better adaptation to the partner. The two modes of interaction also differ in that IUPs usually use only a single continuous segment for partner binding, whereas the binding sites of ordered proteins are more segmented. Probably, all these features contribute to the increased evolutionary conservation of IUP interface residues. These noted molecular differences are also manifested in the interaction energies of IUPs. Our approximation of these by low-resolution force-fields shows that IUPs gain much more stabilization energy from intermolecular contacts, than from folding, i.e. they use their binding energy for folding. Overall, our findings provide a structural rationale to the prior suggestions that many IUPs are specialized for functions realized by protein-protein interactions.     

Predicting where Small Molecules Bind at Protein-Protein Interfaces

Small molecules that bind at protein-protein interfaces may either block or stabilize protein-protein interactions in cells. Thus, some of these binding interfaces may turn into prospective targets for drug design. Here, we collected 175 pairs of protein-protein (PP) complexes and protein-ligand (PL) complexes with known three-dimensional structures for which (1) one protein from the PP complex shares at least 40% sequence identity with the protein from the PL complex, and (2) the interface regions of these proteins overlap at least partially with each other. We found that those residues of the interfaces that may bind the other protein as well as the small molecule are evolutionary more conserved on average, have a higher tendency of being located in pockets and expose a smaller fraction of their surface area to the solvent than the remaining protein-protein interface region. Based on these findings we derived a statistical classifier that predicts patches at binding interfaces that have a higher tendency to bind small molecules. We applied this new prediction method to more than 10 000 interfaces from the protein data bank. For several complexes related to apoptosis the predicted binding patches were in direct contact to co-crystallized small molecules.     

WHISCY: What information does surface conservation yield? Application to data‐driven docking

Protein-protein interactions play a key role in biological processes. Identifying the interacting residues is a first step toward understanding these interactions at a structural level. In this study, the interface prediction program WHISCY is presented. It combines surface conservation and structural information to predict protein-protein interfaces. The accuracy of the predictions is more than three times higher than a random prediction. These predictions have been combined with another interface prediction program, ProMate [Neuvirth et al. J Mol Biol 2004;338:181-199], resulting in an even more accurate predictor. The usefulness of the predictions was tested using the data-driven docking program HADDOCK [Dominguez et al. J Am Chem Soc 2003;125:1731-1737] in an unbound docking experiment, with the goal of generating as many near-native structures as possible. Unrefined rigid body docking solutions within 10 A ligand RMSD from the true structure were generated for 22 out of 25 docked complexes. For 18 complexes, more than 100 of the 8000 generated models were correct. Our results demonstrates the potential of using interface predictions to drive protein-protein docking.