Transposon mutagenesis by Tn4560 and applications with avermectin-producing Streptomyces avermitilis.

The Tn3-like Streptomyces transposon Tn4560 was used to mutagenize Streptomyces avermitilis, the producer of anthelmintic avermectins and the cell growth inhibitor oligomycin. Tn4560 transposed in this strain from a temperature-sensitive plasmid to the chromosome and from the chromosome to a plasmid with an apparent frequency of about 10(-4) to 10(-3) at both 30 and 39 degrees C. Auxotrophic and antibiotic nonproducing mutations were, however, obtained only with cultures that were kept at 37 or 39 degrees C. About 0.1% of the transposon inserts obtained at 39 degrees C caused auxotrophy or abolished antibiotic production. The sites of insertion into the S. avermitilis chromosome were mapped. Chromosomal DNA fragments containing Tn4560 insertions in antibiotic production genes were cloned onto a Streptomyces plasmid with temperature-sensitive replication and used to transport transposon mutations to other strains, using homologous recombination. This technique was used to construct an avermectin production strain that no longer makes the toxic oligomycin.     

Tn4556, a 6.8-kilobase-pair transposable element of Streptomyces fradiae.

A 6.8-kilobase-pair (kbp) transposable element (Tn4556) was found in a neomycin-producing strain of Streptomyces fradiae. This element was first observed in two 30.3-kbp plasmids (pUC1123 and pUC1124) which arose when a thiostrepton resistance gene (1 kbp) was ligated with the BclI-2 fragment (22.5 kbp) that contains the origin of replication of phage SF1. The Tn4556 segment was deleted when these plasmids were transduced into another S. fradiae host with phage SF1. These deletion plasmids (pUC1210 and pUC1211) had copy numbers of less than 1 per chromosome and were unstable. In contrast, pUC1123 and pUC1124, with copy numbers of 12 to 15 per chromosome, respectively, were relatively stable. When pUC1210 and pUC1211 were reintroduced into S. fradiae by protoplast transformation, the Tn4556 element transposed again to the plasmids at numerous new locations in either of two orientations. A copy of Tn4556 was found in the S. fradiae chromosome by hybridization studies. It appears that Tn4556 originated from the chromosome, transposed into unstable pUC1210 and pUC1211, and made stable plasmids. A temperature-sensitive hybrid plasmid carrying a viomycin resistance derivative of Tn4556 (pMT660::Tn4556::vph) was constructed. When Streptomyces lividans UC8390 containing the hybrid plasmid was grown at 39 degrees C, Tn4556::vph (Tn4560) transposed to random positions in the host chromosome.     

Study of the role of the insA open reading frame in the IS1 insertion element structure during transposition and resolution of the IS1 mediated cointegrates

In order to elucidate the function of the IS1 insA gene derivatives of plasmid pUC19::Tn9' with insertions of synthetic oligonucleotides were obtained. The latter are equal or multiple of 9 b.p. in length and are located in the Pst1 site within each of the two IS1 copies of the Tn9' transposon. The insertions of the nine base oligonucleotides code for the neutral amino acids and do not shift the reading frame. One of the mutant transposon obtained - Tn9'/X was studied on the ability to form simple insertions and plasmid cointegrates. For this purpose the pUC19 derivatives carrying the wild type and mutant transposon were mobilized by conjugative plasmid pRP3.1. It was found that the damage of the insA gene does not influence the ability of transposon to form simple insertions and plasmid cointegrates in both recA - and rec+ cells of E. coli. However, the frequency of the cointegrate formation in the subsequent transposition of the mutant transposon from pRP3.1::Tn9'/X to pBR322 was by 10-20 times lower in comparison to the wild type transposon. Instable (dissociating) Tn9'/X-mediated plasmid cointegrates formed by interaction pUC19::Tn9'/X and pRP3.1 were obtained. It was shown that in the E. coli recA-cells such cointegrates dissociate, as a rule, "correctly", i.e. they segregate mainly plasmids of types pUC19::Tn9'/X and pUC19::IS1/X. The data obtained correspond with the notion that the gene insA product is not essential for transposition, but is, possibly, involved in the formation of the IS1-generated deletions.     

Efficient transposition in mycobacteria: construction of Mycobacterium smegmatis insertional mutant libraries.

The Tn611 transposon was inserted into pCG63, a temperature-sensitive plasmid isolated from an Escherichia coli-mycobacterial shuttle vector which contains the pAL5000 and pUC18 replicons. The resulting plasmid, pCG79, was used to generate a large number of insertional mutations in Mycobacterium smegmatis. These are the first mycobacterial insertional mutant libraries to be constructed by transposition directly into a mycobacterium. No highly preferential insertion sites were detected by Southern blot analysis of the chromosomal DNAs isolated from the insertion mutants. Auxotrophic mutants with various phenotypes were isolated at a frequency ranging from 0.1 to 0.4%, suggesting that the libraries are representative. The pCG79 system thus seems to be a useful tool for the study of M. smegmatis genetics and may be applicable to other mycobacteria, such as the M. tuberculosis complex.     

Function of the InsA gene in the IS1 element of the Tn9' transposon: influence of oligonucleotide inserts in the InsA gene on formation of simple insertions and plasmid cointegrates]

To elucidate the role of the insA reading frame in transposition of the IS1 element of the Tn9' transposon, the derivatives of plasmids pUC19::Tn9' and pUC19::IS1 have been obtained using oligonucleotide inserts of the length equal or exceeding 9 bp and equal to 10 bp. The ability of mutant variants of the Tn9' transposon and the IS1 element to form simple insertions and plasmid cointegrates was studied. To this end, experiments were performed on mobilization of the derivatives of pUC19 containing mutant variants of the IS1 element and Tn9' as well as of the plasmids pUC19::Tn9' by the conjugative plasmid pRP3.1. According to the data obtained, mutations (inserts) in the insA gene have no influence on the frequency of transposition of the IS1 element and Tn9' from the plasmid pUC19 to pRP3.1. At the same time, the frequency of transposition events of mutant variants of Tn9' from the plasmid pRP3.1 to pBR322 is more than 10 times lower in comparison with the wild type transposon. The data obtained are in accordance with the assumption that the insA gene is not essential for transposition. A hypothesis is put forward explaining the role of the insA gene product in the process of bringing together short inverted repeats of the IS1, which are the sites for the transposase to be recognized at first stages of transposition.     

Transposon vectors containing non-antibiotic resistance selection markers for cloning and stable chromosomal insertion of foreign genes in gram-negative bacteria.

A simple procedure for cloning and stable insertion of foreign genes into the chromosomes of gram-negative eubacteria was developed by combining in two sets of plasmids (i) the transposition features of Tn10 and Tn5; (ii) the resistances to the herbicide bialaphos, to mercuric salts and organomercurial compounds, and to arsenite, and (iii) the suicide delivery properties of the R6K-based plasmid pGP704. The resulting constructions contained unique NotI or SfiI sites internal to either the Tn10 or the Tn5 inverted repeats. These sites were readily used for cloning DNA fragments with the help of two additional specialized cloning plasmids, pUC18Not and pUC18Sfi. The newly derived constructions could be maintained only in donor host strains that produce the R6K-specified pi protein, which is an essential replication protein for R6K and plasmids derived therefrom. Donor plasmids containing hybrid transposons were transformed into a specialized lambda pir lysogenic Escherichia coli strain with a chromosomally integrated RP4 that provided broad-host-range conjugal transfer functions. Delivery of the donor plasmids into selected host bacteria was accomplished through mating with the target strain. Transposition of the hybrid transposon from the delivered suicide plasmid to a replicon in the target cell was mediated by the cognate transposase encoded on the plasmid at a site external to the transposon. Since the transposase function was not maintained in target cells, such cells were not immune to further transposition rounds. Multiple insertions in the same strain are therefore only limited by the availability of distinct selection markers. The utility of the system was demonstrated with a kanamycin resistance gene as a model foreign insert into Pseudomonas putida and a melanin gene from Streptomyces antibioticus into Klebsiella pneumoniae. Because of the modular nature of the functional parts of the cloning vectors, they can be easily modified and further selection markers can be incorporated. The cloning system described here will be particularly useful for the construction of hybrid bacteria that stably maintain inserted genes, perhaps in competitive situations (e.g., in open systems and natural environments), and that do not carry antibiotic resistance markers characteristic of most available cloning vectors (as is currently required of live bacterial vaccines).     

Tn4560在圈卷产色链霉菌中的转座及其在尼可霉素生物合成相关基因克隆中的应用

采用常规转化方法用来自天蓝色链霉菌J1 5 0 1的质粒pUC1 1 6 9(pMT6 6 0∷Tn45 5 6∷vph)多次转化尼可霉素产生菌圈卷产色链霉菌野生型 71 0 0的原生质体 ,均未得到转化子。采用限制性热衰减法于 5 0℃ ,3 0min溶菌制备 71 0 0的原生质体 ,获得了转化子 ,但转化频率极低 ,只有 0 4个转化子 μgDNA。用来自 71 0 0的pUC1 1 6 9再转化不含pUC1 1 6 9的 71 0 0原生质体 ,转化频率提高 1 0 3 ～ 1 0 4 倍。于 3 9℃ ,MM Vio条件下培养携带有pUC1 1 6 9的 71 0 0孢子 ,Tn45 6 0发生转座 ,筛选到 40 6 8个转座菌落 ,并从中得到 8株尼可霉素阻断突变株 ;对这 8株突变株的总DNA进行Southern杂交分析表明 ,Tn45 6 0至少在 4个不同的位点插入到 71 0 0的染色体上。用实验室已获得的与尼可霉素生物合成有关的 3 0kbDNA片段为探针和经不同酶切的 8株突变株的总DNA进行Southern杂交 ,结果表明 ,除阻断突变株Nik5有杂交信号且杂交信号大小均同野生型…     

Partial deletion of transposon Tn4560 integrated into the genome of Streptomyces tendae

Polymerase chain reaction (PCR), Southern hybridization and DNA sequencing experiments were done to determine whether all of Tn 4560 , a Streptomyces transposon, integrated into the genomes of three nikkomycin non-producing mutants. A deletion of 279 bases occurred at one end of Tn 4560 while present in the genome of one of the mutants.     

Tn4563 transposition in Streptomyces coelicolor and its application to isolation of new morphological mutants.

The Tn3-like transposon Tn4556 (and its derivatives Tn4560 and Tn4563) has been used for insertion mapping of genetic loci cloned on plasmids, but it has been difficult to obtain chromosomal insertions, largely because of the lack of a strong selection against transposon donor molecules. In this communication, we report two efficient selection techniques for transposition and their use in the isolation of chromosomal insertion mutations. A number of independent Streptomyces coelicolor morphological mutants (bld and whi) were obtained. Two of the bld mutations were mapped to locations on the chromosome by SCP1-mediated conjugation; at least one mutation, bld-5m1, appears to define a novel locus involved in control of S. coelicolor morphogenesis and antibiotic production.     

Genetic organization of the bacterial conjugative transposon Tn916.

Tn916, which encodes resistance to tetracycline, is a 16.4-kilobase conjugative transposon originally identified on the chromosome of Streptococcus faecalis DS16. The transposon has been cloned in Escherichia coli on plasmid vectors, where it expresses tetracycline resistance; it can be reintroduced into S. faecalis via protoplast transformation. We have used a lambda::Tn5 bacteriophage delivery system to introduce Tn5 into numerous sites within Tn916. The Tn5 insertions had various effects on the behavior of Tn916. Some insertions eliminated conjugative transposition but not intracellular transposition, and others eliminated an excision step believed to be essential for both types of transposition. A few inserts had no effect on transposon behavior. Functions were mapped to specific regions on the transposon.     

Cloning and nucleotide sequence of a gene upstream of the eaeA gene of enterohemorrhagic Escherichia coli O157:H7

Abstract Conjugative, thermosensitive shuttle plasmids capable of transfer from Escherichia coli to Mycobacterium smegmatis were constructed. They contain both an E. coli replicon and a thermosensitive derivative of the pALS000 mycobacterial replicon. Using a temperature shift protocol, the conjugative plasmid, pJAZll was used to deliver the transposon Tn 611 from E. coli into the chromosome of M. smegmatis . Analysis of transconjugants revealed the random insertion of the transposon.     

Transposition of Tn5096 and other IS493 derivatives in Streptomyces griseofuscus.

Tn5096 was constructed by inserting an apramycin resistance gene, aac(3)IV, into IS493 from Streptomyces lividans. By using conventional and pulsed-field gel electrophoresis, Tn5096 and related transposons were shown to insert into many different locations in the Streptomyces griseofuscus chromosome and in two linear plasmids. On insertion into the target site CANTg, 3 bp appeared to be duplicated. Independent transpositions were obtained by delivery of the transposon from a temperature-sensitive plasmid. The frequency of auxotrophy among cultures containing transpositions was about 0.2%.     

Low target site specificity of an IS6100-based mini-transposon, Tn1792, developed for transposon mutagenesis of antibiotic-producing Streptomyces

To improve transposon mutagenesis of antibiotic-producing Streptomyces, a mini-transposon, Tn1792, was constructed, based on IS6100, originally isolated from Mycobacterium fortuitum. Easily manageable transposition assays were developed to demonstrate inducible transposition of Tn1792 into the Streptomyces genome from a temperature-sensitive delivery plasmid. Introduction of the selectable aac1 gene between the inverted repeats in Tn1792 allowed for both reliable identification of transposition events in Streptomyces, and also subsequent cloning of transposon-tagged sequences in Escherichia coli. This enabled the target site specificity of Tn1792 to be determined at nucleotide resolution, revealing no significant shared homology between different target sites. Consequently, Tn1792 is well suited for random mutagenesis of Streptomyces.     

Auxotrophs produced by transposon mutagenesis in Streptomyces tendae ATCC 31160

Six auxotrophs were induced in Streptomyces tendae ATCC 31160 with transposon Tn 4560 . Insertion of the transposon into chromosomal DNA of these auxotrophs occurred at different sites suggesting that transposition may be random. Transposition frequency was 1 times 10^-3. Transposon-tagged antibiotic biosynthetic genes will provide a powerful tool for the isolation of genes involved in nikkomycin biosynthesis.     

Generation of Tn5 insertions in streptococcal conjugative transposon Tn916

A method has been developed for the introduction of Tn5 into Escherichia coli plasmid chimeras containing Streptococcus faecalis DNA. Tn5 could be introduced via a lambda::Tn5 delivery vehicle. The system proved to be particularly efficient and facilitated insertions at numerous sites on DNA containing the 16-kilobase conjugative transposon Tn916. It was possible to introduce some of the resulting Tn916::Tn5 derivatives back into S. faecalis by using a recently developed protoplast transformation procedure. A presumed zygotic induction resulted in insertion of the Tn916 derivatives at multiple sites in the S. faecalis chromosome.     

Generation of Tn5 insertions in streptococcal conjugative transposon Tn916.

A method has been developed for the introduction of Tn5 into Escherichia coli plasmid chimeras containing Streptococcus faecalis DNA. Tn5 could be introduced via a lambda::Tn5 delivery vehicle. The system proved to be particularly efficient and facilitated insertions at numerous sites on DNA containing the 16-kilobase conjugative transposon Tn916. It was possible to introduce some of the resulting Tn916::Tn5 derivatives back into S. faecalis by using a recently developed protoplast transformation procedure. A presumed zygotic induction resulted in insertion of the Tn916 derivatives at multiple sites in the S. faecalis chromosome.     

Transposon Tn4556 of Streptomyces fradiae: nucleotide sequence of the ends and the target sites.

A transposon, Tn4556, has recently been isolated from Streptomyces fradiae (S.-T. Chung, J. Bacteriol. 169:4436-4441, 1987). The ends of Tn4556 were found to contain inverted repeats of 38 base pairs with 70% sequence identity with the ends of Tn3. Insertion of Tn4556 into a Streptomyces plasmid resulted in a 5-base-pair duplication of the target site.     

Tn5099, a xylE promoter probe transposon for Streptomyces spp.

Tn5099, a promoter probe transposon for Streptomyces spp., was constructed by inserting a promoterless xylE gene and a hygromycin resistance gene into IS493. Tn5099 transposed into different sites in the Streptomyces griseofuscus genome, and the xylE reporter gene was expressed in some of the transposition mutants. Strains containing Tn5099 insertions that gave regulated expression of the xylE gene were identified.     

Plasmid transfer from Streptomyces to Mycobacterium smegmatis by spontaneous transformation

Hybrids of the Streptomyces coelicolor conjugative plasmid SCP2* and the Mycobacterium plasmid pAL5000 were transferred from Streptomyces coelicolor or Streptomyces lividans to Mycobacterium smegmatis mc2155 in plate crosses. Inactivation of the SCP2* transfer function did not prevent or reduce plasmid transfer. This transfer was DNase I sensitive and thus involved release of DNA from Streptomyces, followed by transformation of M. smegmatis. M. smegmatis growing on specific solid media was also transformed by pure CCC and linear plasmid DNA. Small plasmids were taken up intact but large plasmids suffered deletions. Competence developed within 24 h of incubation at 30 degrees C or 37 degrees C, and up to 400 transformants were obtained per microg of CCC plasmid DNA. Transformation frequencies were higher when M. smegmatis was co-cultivated with plasmid-free Streptomyces, but unaffected by resident homologous sequences or inactivation of recA in M. smegmatis. Spontaneous transformation was also observed with a circular Streptomyces transposable element which inserted into chromosomal sites. Transformative plasmid transfer was also shown to occur between M. smegmatis strains. This is the first report of non-artificially induced, spontaneous plasmid transformation in Mycobacterium.