Identification of functional regions on the tail of Acanthamoeba myosin- II using recombinant fusion proteins. I. High resolution epitope mapping and characterization of monoclonal antibody binding sites

We used a series of COOH-terminally deleted recombinant myosin molecules to map precisely the binding sites of 22 monoclonal antibodies along the tail of Acanthamoeba myosin-II. These antibodies bind to 14 distinguishable epitopes, some separated by less than 10 amino acids. The positions of the binding sites visualized by electron microscopy agree only approximately with the physical positions of these sites on the alpha-helical coiled-coil tail. On the other hand, the epitope map agrees precisely with competitive binding studies: all antibodies that share an epitope compete with each other for binding to myosin. Antibodies with adjacent epitopes can compete with each other at linear distances up to 5 or 6 nm, and many antibodies that bind 3-7- nm apart can enhance the binding of each other to myosin. Most of the antibodies that bind to the distal 37 nm of the tail disrupt assembly of octameric minifilaments and, depending upon the exact location of the binding site, stop assembly at specific steps yielding, for example, monomers, antiparallel dimers, parallel dimers or antiparallel tetramers. The effects of these antibodies on assembly identify sites on the tail that are required for individual steps in minifilament assembly. Experiments on the assembly of truncated myosin-II tails have revealed a complementary group of sites that participate in the assembly reactions (Sinard, J.H., D.L. Rimm, and T.D. Pollard. 1990. J. Cell Biol. 111:2417-2426). Antibodies that bind to the distal tail but do not affect assembly appear to have a low affinity for myosin-II. Antibodies that bind to the proximal 50 nm of the tail do not inhibit the assembly of minifilaments. Many antibodies that bind to the tail of myosin-II, even some that have no obvious effect on minifilament assembly, can inhibit the actomyosin ATPase activity and the contraction of an actin gel formed in crude extracts. An antibody that binds between amino acids 1447 and 1467 inhibits the phosphorylation of serine residues distal to residue 1483.     

The mechanism of assembly of Acanthamoeba myosin-II minifilaments: minifilaments assemble by three successive dimerization steps

We used 90 degrees light scattering, analytical ultracentrifugation, and electron microscopy to deduce that Acanthamoeba myosin-II minifilaments, composed of eight molecules each, assemble by a novel mechanism consisting of three successive dimerization steps rather than by the addition of monomers or parallel dimers to a nucleus. Above 200 mM KCl, Acanthamoeba myosin-II is monomeric. At low ionic strength (less than 100 mM KCl), myosin-II polymerizes into bipolar minifilaments. Between 100 and 200 mM KCl, plots of light scattering vs. myosin concentration all extrapolate to the origin but have slopes which decrease with increasing KCl. This indicates that structures intermediate in size between monomers and full length minifilaments are formed, and that the critical concentrations for assembly of these structures is very low. Analytical ultracentrifugation has confirmed that intermediate structures exist at these salt concentrations, and that they are in rapid equilibrium with each other. We believe these structures represent assembly intermediates and have used equilibrium analytical ultracentrifugation and electron microscopy to identify them. Polymerization begins with the formation of antiparallel dimers, with the two tails overlapping by approximately 15 nm. Two antiparallel dimers then associated with a 15-nm stagger to form an antiparallel tetramer. Finally, two tetramers associate with a 30-nm stagger to form the completed minifilament. At very low ionic strengths, the last step in the assembly mechanism is largely reversed and antiparallel tetramers are the predominant species. Alkaline pH, which can also induce minifilament disassembly, produces the same assembly intermediates as are found for salt induced disassembly.     

Assembly of Acanthamoeba myosin-II minifilaments. Definition of C-terminal residues required to form coiled-coils, dimers, and octamers

Acanthamoeba myosin-II forms bipolar octamers by three successive steps of dimerization of the C-terminal, coiled-coil tail. In this study, we generated N-terminal and C-terminal truncation constructs and point mutants of the Acanthamoeba myosin-II tail to delineate the structural requirements for assembly of bipolar mini-filaments. By the use of light-scattering, CD spectroscopy, analytical ultracentrifugation, and tryptophan fluorescence experiments, we determined that: (1) the C-terminal 14 heptad repeats plus most of the tailpiece (residues 1381-1509) are required to form antiparallel dimers of coiled-coils; (2) amino acid residues within heptads 23-32 (residues 1254-1325) are required to form tetramers; (3) the C-terminal 32 heptad repeats suffice to assemble octameric minifilaments; (4) A1378 is outside of the interaction interface; (5) the mutation L1475W inhibits dimerization; and (6) F1443 is involved in the dimerization interface but is exposed to the solvent. We propose that the tailpiece (residues 1483-1509) interacts with two heptads (13 and 14, residues 1381-1393), which are important for dimerization and coiled-coil formation. These results support a model in which hydrophobic as well as electrostatic interactions control the register between myosin-II coiled-coils and guide sequential steps of dimerization that generate stable, octameric mini-filaments.     

Acanthamoeba myosin-II minifilaments assemble on a millisecond time scale with rate constants greater than those expected for a diffusion limited reaction

We have shown previously that Acanthamoeba myosin-II minifilaments assemble by three successive dimerization steps, forming, progressively, monomers, antiparallel dimers, antiparallel tetramers, and finally the full size octameric minifilament (Sinard, J. H., Stafford, W. F., and Pollard, T. D. (1989) J. Cell Biol. 109, 1537-1548). In the current study, we investigate the kinetics of the assembly of these minifilaments, initiating assembly by the rapid dilution of salt in a stopped-flow light scattering apparatus. The majority of the reaction is completed within 50 ms and is greater than 90% completed within 1 s. Assembly data over a greater than 6-fold myosin concentration range can be fit using the successive dimerization mechanism with a single set of rate constants. Second order rate constants for the initial steps in the assembly reaction exceed 10(8) M-1 s-1, and equilibrium dissociation constants predict a very low critical concentration, consistent with previous data. Other possible assembly mechanisms do not adequately fit all of the available data. Filament disassembly at 300 mM KCl is even more rapid, and there is both an increase in the dissociation rate constants and a decrease in the association rate constants with increasing KCl. Aggregation of minifilaments induced by Mg2+ is much slower and takes many minutes to reach equilibrium.     

The effect of heavy chain phosphorylation and solution conditions on the assembly of Acanthamoeba myosin-II

At low ionic strength, Acanthamoeba myosin-II polymerizes into bipolar minifilaments, consisting of eight molecules, that scatter about three times as much light as monomers. With this light scattering assay, we show that the critical concentration for assembly in 50-mM KCl is less than 5 nM. Phosphorylation of the myosin heavy chain over the range of 0.7 to 3.7 P per molecule has no effect on its KCl dependent assembly properties: the structure of the filaments, the extent of assembly, and the critical concentration for assembly are the same. Sucrose at a concentration above a few percent inhibits polymerization. Millimolar concentrations of MgCl2 induce the lateral aggregation of fully formed minifilaments into thick filaments. Compared with dephosphorylated minifilaments, minifilaments of phosphorylated myosin have a lower tendency to aggregate laterally and require higher concentrations of MgCl2 for maximal light scattering. Acidic pH also induces lateral aggregation, whereas basic pH leads to depolymerization of the myosin- II minifilaments. Under polymerizing conditions, millimolar concentrations of ATP only slightly decrease the light scattering of either phosphorylated or dephosphorylated myosin-II. Barring further modulation of assembly by unknown proteins, both phosphorylated and dephosphorylated myosin-II are expected to be in the form of minifilaments under the ionic conditions existing within Acanthamoeba.     

Flexibility of Acanthamoeba myosin rod minifilaments.

Previous electric birefringence experiments have shown that the actin-activated Mg2+-ATPase activity of Acanthamoeba myosin II correlates with the ability of minifilaments to cycle between flexible and stiff conformations. The cooperative transition between conformations was shown to depend on Mg2+ concentration, on ATP binding, and on the state of phosphorylation of three serines in the C-terminal end of the heavy chains. Since the junction between the heavy meromyosin (HMM) and light meromyosin (LMM) regions is expected to disrupt the alpha-helical coiled-coil structure of the rod, this region was anticipated to be the flexible site. We have now cloned and expressed the wild-type rod (residues 849-1509 of the full-length heavy chain) and rods mutated within the junction in order to test this. The sedimentation and electric birefringence properties of minifilaments formed by rods and by native myosin II are strikingly similar. In particular, the Mg2+-dependent flexible-to-stiff transitions of native myosin II and wild-type rod minifilaments are virtually superimposable. Mutations within the junction between the HMM and LMM regions of the rod modulate the ability of Mg2+ to stabilize the stiff conformation. Less Mg2+ is required to induce minifilament stiffening if proline-1244 is replaced with alanine. Deleting the entire junction region (25 amino acids) results in a even greater decrease in the Mg2+ concentration necessary for the transition. The HMM-LMM junction does indeed seem to act as a Mg2+-dependent flexible hinge.     

Location of the head-tail junction of myosin

The tails of double-headed myosin molecules consist of an alpha-helical/coiled-coil structure composed of two identical polypeptides with a heptad repeat of hydrophobic amino acids that starts immediately after a conserved proline near position 847. Both muscle and nonmuscle myosins have this heptad repeat and it has been assumed that proline 847 is physically located at the head-tail junction. We present two lines of evidence that this assumption is incorrect. First, we localized the binding sites of several monoclonal antibodies on Acanthamoeba myosin-II both physically, by electron microscopy, and chemically, with a series of truncated myosin-II peptides produced in bacteria. These data indicate that the head-tail junction is located near residue 900. Second, we compared the lengths of two truncated recombinant myosin-II tails with native myosin-II. The distances from the NH2 termini to the tips of these short tails confirms the rise per residue (0.148 nm/residue) and establishes that the 86-nm tail of myosin-II must start near residue 900. We propose that the first 53 residues of heptad repeat of Acanthamoeba myosin-II and other myosins are located in the heads and the proteolytic separation of S-1 from rod occurs within the heads.     

Assembly of Acanthamoeba myosin-II minifilaments. Model of anti-parallel dimers based on EM and X-ray diffraction of 2D and 3D crystals

Current models suggest that the first step in the assembly of Acanthamoeba myosin-II is anti-parallel dimerization of the coiled-coil tails with an overlap of 15 nm. Sedimentation equilibrium experiments showed that a construct containing the last 15 heptads and the non-helical tailpiece of the myosin-II tail (15T) forms dimers. To examine the structure of the 15T dimer, we grew 3D and 2D crystals suitable for X-ray diffraction and electron image analysis, respectively. For both conditions, crystals formed in related space and plane groups with similar unit cells (a=87.7 A, b=64.8 A, c=114.9 A, beta=108.0 degrees). Inspection of the X-ray diffraction pattern and molecular replacement analysis revealed the orientation of the coiled-coils in the unit cell. A 3D density map at 15A in-plane resolution derived from a tilt series of electron micrographs established the solvent content of the 3D crystals (75%, v/v), placed the coiled-coil molecules at the approximate translation in the unit cell, and revealed the symmetry relationships between molecules. On the basis of the low-resolution 3D structure, biochemical constraints, and X-ray diffraction data, we propose a model for myosin interactions in the anti-parallel dimer of coiled-coils that guide the first step of myosin-II assembly.     

Critical regions for assembly of vertebrate nonmuscle myosin II

Myosin II molecules assemble and form filaments through their C-terminal rod region, and the dynamic filament assembly-disassembly process of nonmuscle myosin II molecules is important for cellular activities. To estimate the critical region for filament formation of vertebrate nonmuscle myosin II, we assessed the solubility of a series of truncated recombinant rod fragments of nonmuscle myosin IIB at various concentrations of NaCl. A C-terminal 248-residue rod fragment (Asp 1729-Glu 1976) was shown by its solubility behavior to retain native assembly features, and two regions within it were found to be necessary for assembly: 35 amino acid residues from Asp 1729 to Thr 1763 and 39 amino acid residues from Ala 1875 to Ala 1913, the latter containing a sequence similar to the assembly competence domain (ACD) of skeletal muscle myosin. Fragments lacking either of the two regions were soluble at any NaCl concentration. We referred to these two regions as nonmuscle myosin ACD1 (nACD1) and nACD2, respectively. In addition, we constructed an alpha-helical coiled-coil model of the rod fragment, and found that a remarkable negative charge cluster (termed N1) and a positive charge cluster (termed P2) were present within nACD1 and nACD2, respectively, besides another positive charge cluster (termed P1) in the amino-terminal vicinity of nACD2. From these results, we propose two major electrostatic interactions that are essential for filament formation of nonmuscle myosin II: the antiparallel interaction between P2 and N1 which is essential for the nucleation step and the parallel interaction between P1 and N1 which is important for the elongation step.     

Mts1 regulates the assembly of nonmuscle myosin-IIA

The formation of myosin-II filaments is fundamental to contractile and motile processes in nonmuscle cells, and elucidating the mechanisms controlling filament assembly is essential for understanding how myosin-II rapidly responds to changing conditions within the cell. Several proteins including KRP and a novel 38 kDa protein (1, 2) have been shown to modulate filament assembly through the stabilization of myosin-II assemblies. In contrast, we demonstrate that mts1, a member of the Ca(2+)-regulated S100 family of proteins, may regulate the monomeric, unassembled state in an isoform-specific manner. Biochemical analyses demonstrate that mts1 has a 9-fold higher affinity for myosin-IIA filaments than for myosin-IIB filaments. At stoichiometric levels, mts1 inhibits the assembly of myosin-IIA monomers into filaments and promotes the disassembly of myosin-IIA filaments into monomers; however, mts1 has little effect on the assembly properties of myosin-IIB. Using a solution based-assay, we have demonstrated that mts1 binds to residues 1909-1924 of the myosin-IIA heavy chain, which is near the C-terminal tip of the alpha-helical coiled-coil. The observation that mts1 binds a linear sequence of approximately 16 amino acids is consistent with other S100 family members, which bind linear sequences of 13-22 residues in their protein targets. In addition, mts1 increases the critical monomer concentration for myosin-IIA filament assembly by approximately 11-fold. Kinetic assembly assays indicate that the elongation rate and the extent of polymerization depend on the initial myosin-IIA concentration; however, mts1 had only a small affect on the half-time for assembly and predominately affected the extent of myosin IIA polymerization. Altogether, these observations are consistent with mts1 regulating myosin IIA assembly by monomer sequestration and suggest that mts1 regulates cell shape and motility through the modulation of myosin-IIA function.     

Nonmuscle myosin IIA dynamically guides regulatory light chain phosphorylation and assembly of nonmuscle myosin IIB

Nonmuscle myosin II minifilaments have emerged as central elements for force generation and mechanosensing by mammalian cells. Each minifilament can have a different composition and activity due to the existence of the three nonmuscle myosin II paralogs A, B and C and their respective phosphorylation pattern. We have used CRISPR/Cas9-based knockout cells, quantitative image analysis and mathematical modeling to dissect the dynamic processes that control the formation and activity of heterotypic minifilaments and found a strong asymmetry between paralogs A and B. Loss of NM IIA completely abrogates regulatory light chain phosphorylation and reduces the level of assembled NM IIB. Activated NM IIB preferentially co-localizes with pre-formed NM IIA minifilaments and stabilizes the filament in a force-dependent mechanism. NM IIC is only weakly coupled to these processes. We conclude that NM IIA and B play clearly defined complementary roles during assembly of functional minifilaments. NM IIA is responsible for the formation of nascent pioneer minifilaments. NM IIB incorporates into these and acts as a clutch that limits the force output to prevent excessive NM IIA activity. Together these two paralogs form a balanced system for regulated force generation.     

Macromolecular assemblies of myosin.

The self-assembly of myosin into filamentous structures is a highly cooperative and rapid process. Nevertheless, the presence of nonequivalent bonding interactions within the filament permits differential stabilization of several macromolecular assemblies of myosin under well-controlled ionic conditions in citrate/Tris buffer at pH 8.0. We have detected and characterized bipolar myosin minifilaments, myosin octamers, and tetramers by using light scattering, analytical ultracentrifugation, and viscosity techniques. These structures have molecular weights of 8.0 X 10(6), 3.9 X 10(6) g/mol, sedimentation coefficients of 32S, 22S, and 18S, and radii of gyration of 990 A, 890 A and 790, A, respectively. The similar radii of gyration indicate similar bipolar geometry for all these particles. The 32S minifilaments in 10 mM citrate/Tris buffer (pH 8.0) are the most stable species. The smaller 18S and 22S assemblies in 2 mM and 5 mM citrate/Tris, pH 8.0, are readily affected by low concentrations of KCl and fuse into the minifilament particles. The instability of the 18S and 22S forms of myosin assembly is also revealed by their titration with ATP. These structures are dissociated at lower ATP concentrations than the minifilaments and do not show the cooperative dissociation transitions characteristic of filaments and minifilaments. Sedimentation velocity analysis of the 18S and 22S species in the presence of ATP reveals the involvement of 10S myosin dimer in the dissociation of assembled myosin. The different forms of assembled myosin are discussed in the context of formation of myosin minifilaments.     

Assembly of intermediate filaments

The assembly of intermediate filaments is a fundamental property of the central rod domain of the individual subunit proteins. This rod domain, with its high propensity for α-helix formation, is the common and identifying feature of this family of proteins. Assembly occurs in vitro in the absence of other proteins or exogenous sources of energy; in vivo, it appears as if other factors, as yet poorly understood, modulate the assembly of intermediate filaments. Parallel, in-register dimers form via coiled-coil interactions of the rod domain. Tetramers may form from staggered arrays of parallel or antiparallel arrangements of dimers. Higher-order polymerization, which occurs spontaneously if the ionic strength of a mixture of dimers and tetramers is raised, proceeds rapidly through poorly described intermediates to the final 10 nm filament. This process is dependent on and modulated by the non-α-helical end domains, as well as those amino acids present at the very beginning and end of the rod domain. The interactions governing tetramer formation are most probably the same ones that are responsible for the lateral and longitudinal associations within intermediate filaments.     

Ordered assemblies of myosin minifilaments

Electron microscopic observations of negatively stained myosin minifilaments in a solution containing 10 mM-citrate buffer (pH 8.0), 4 mM-MgCl2 reveal ordered assemblies. They reveal bundles of parallel minifilaments of about 330 nm in length, aggregated into periodic linear and hexagonal structures. These structures are formed by means of interaction between myosin heads, arranged at the ends of minifilament bundles. The addition of 1 mM-ATP to the above solution causes dissociation of minifilament bundles into individual minifilaments without preventing the latter from association into linear "end-to-end" assemblies. Phosphorylation of myosin light chains does not exert any noticeable effect on the structure of the ordered minifilament assemblies but significantly increases their quantity. The interaction between minifilaments observed by us should be taken into consideration in studies on the properties of myosin which make use of minifilament systems.     

Dictyostelium myosin bipolar thick filament formation: importance of charge and specific domains of the myosin rod

Myosin-II thick filament formation in Dictyostelium is an excellent system for investigating the phenomenon of self-assembly, as the myosin molecule itself contains all the information required to form a structure of defined size. Phosphorylation of only three threonine residues can dramatically change the assembly state of myosin-II. We show here that the C-terminal 68 kDa of the myosin-II tail (termed AD-Cterm) assembles in a regulated manner similar to full-length myosin-II and forms bipolar thick filament (BTF) structures when a green fluorescent protein (GFP) “head” is added to the N terminus. The localization of this GFP-AD-Cterm to the cleavage furrow of dividing Dictyostelium cells depends on assembly state, similar to full-length myosin-II. This tail fragment therefore represents a good model system for the regulated formation and localization of BTFs. By reducing regulated BTF assembly to a more manageable model system, we were able to explore determinants of myosin-II self-assembly. Our data support a model in which a globular head limits the size of a BTF, and the large-scale charge character of the AD-Cterm region is important for BTF formation. Truncation analysis of AD-Cterm tail fragments shows that assembly is delicately balanced, resulting in assembled myosin-II molecules that are poised to disassemble due to the phosphorylation of only three threonines.     

Dictyostelium Myosin Bipolar Thick Filament Formation: Importance of Charge and Specific Domains of the Myosin Rod

Myosin-II thick filament formation in Dictyostelium is an excellent system for investigating the phenomenon of self-assembly, as the myosin molecule itself contains all the information required to form a structure of defined size. Phosphorylation of only three threonine residues can dramatically change the assembly state of myosin-II. We show here that the C-terminal 68 kDa of the myosin-II tail (termed AD-Cterm) assembles in a regulated manner similar to full-length myosin-II and forms bipolar thick filament (BTF) structures when a green fluorescent protein (GFP) “head” is added to the N terminus. The localization of this GFP-AD-Cterm to the cleavage furrow of dividing Dictyostelium cells depends on assembly state, similar to full-length myosin-II. This tail fragment therefore represents a good model system for the regulated formation and localization of BTFs. By reducing regulated BTF assembly to a more manageable model system, we were able to explore determinants of myosin-II self-assembly. Our data support a model in which a globular head limits the size of a BTF, and the large-scale charge character of the AD-Cterm region is important for BTF formation. Truncation analysis of AD-Cterm tail fragments shows that assembly is delicately balanced, resulting in assembled myosin-II molecules that are poised to disassemble due to the phosphorylation of only three threonines.     

Myosin-II tails confer unique functions in Schizosaccharomyces pombe: characterization of a novel myosin-II tail

Schizosaccharomyces pombe has two myosin-IIs, Myo2p and Myp2p, which both concentrate in the cleavage furrow during cytokinesis. We studied the phenotype of mutant myosin-II strains to examine whether these myosins have overlapping functions in the cell. myo2(+) is essential. myp2(+) cannot rescue loss of myo2(+) even at elevated levels of expression. myp2(+) is required under specific nutritional conditions; thus myo2(+) cannot rescue under these conditions. Studies with chimeras show that the tails rather than the structurally similar heads determine the gene-specific functions of myp2(+) and myo2(+). The Myo2p tail is a rod-shaped coiled-coil dimer that aggregates in low salt like other myosin-II tails. The Myp2p tail is monomeric in high salt and is insoluble in low salt. Biophysical properties of the full-length Myp2p tail and smaller subdomains indicate that two predicted coiled-coil regions fold back on themselves to form a rod-shaped antiparallel coiled coil. This suggests that Myp2p is the first type II myosin with only one head. The C-terminal two-thirds of Myp2p tail are essential for function in vivo and may interact with components of the salt response pathway.     

Assembly of smooth muscle myosin minifilaments: effects of phosphorylation and nucleotide binding

Small bipolar filaments, or "minifilaments," are formed when smooth muscle myosin is dialyzed against low ionic strength pyrophosphate or citrate/Tris buffers. Unlike synthetic filaments formed at approximately physiological ionic conditions, minifilaments are homogeneous as indicated by their hypersharp boundary during sedimentation velocity. Electron microscopy and hydrodynamic techniques were used to show that 20-22S smooth muscle myosin minifilaments are 380 nm long and composed of 12-14 molecules. By varying solvents, a continuum of different size polymers in the range of 15-30S could be obtained. Skeletal muscle myosin, in contrast, preferentially forms a stable 32S minifilament (Reisler, E., P. Cheung, and N. Borochov. 1986. Biophys. J. 49:335-342), suggesting underlying differences in the assembly properties of the two myosins. Addition of salt to the smooth muscle myosin minifilaments caused unidirectional growth into a longer "side-polar" type of filament, whereas bipolar filaments were consistently formed by skeletal muscle myosin. As with synthetic filaments, addition of 1 mM MgATP caused dephosphorylated minifilaments to dissociate to a mixture of folded monomers and dimers. Phosphorylation of the regulatory light chain prevented disassembly by nucleotide, even though it had no detectable effect on the structure of the minifilament. These results suggest that differences in filament stability as a result of phosphorylation are due largely to conformational changes occurring in the myosin head, and are not due to differences in filament packing.     

Multiple actin-based motor genes in Dictyostelium.

Dictyostelium cells, devoid of conventional myosin, display a variety of motile activities, consistent with the presence of other molecular motors. The Dictyostelium genome was probed at low stringency with a gene fragment containing the conserved conventional myosin head domain sequences to identify other actin-based motors that may play a role in the observed motility of these mutant cells. One gene (abmA) has been characterized and encodes a polypeptide of approximately 135 kDa with a head region homologous to other myosin head sequences and a tail region that is not predicted to form either an alpha-helical structure of coiled-coil interactions. Comparisons of the amino acid sequences of the tail regions of abmA, Dictyostelium myosin I, and Acanthamoeba myosins IB and IL reveal an area of sequence similarity in the amino terminal half of the tail that may be a membrane-binding domain. The abmA gene, however, does not contain an unusual Gly, Pro, Ala stretch typical of many of the previously described myosin Is. Two additional genes (abmB and abmC) were identified using this approach and also found to contain sequences that encode proteins with typical conserved myosin head sequences. The abm genes may be part of a large family of actin-based motors that play various roles in diverse aspects of cellular motility.