Interaction of fibrinogen and its derivatives with fibrin

The binding between complementary polymerization sites of fibrin monomers plays an essential role in the formation of the fibrin clot. One set of polymerization sites involved in the interaction of fibrin monomers is believed to pre-exist in fibrinogen, while the complementary set of binding sites is exposed after the cleavage of fibrinopeptides from fibrinogen. The polymerization sites present in fibrinogen and its derivatives mediate their binding to fibrin. Although the binding of fibrinogen and its derivatives to fibrin have been qualitatively studied, there has been no systematic, quantitative investigation of their interaction with forming or preformed clots. In the present study, the binding of fibrinogen and fragments DD, D1, and E1 was measured using a sonicated suspension of plasminogen- and thrombin-free human cross-linked fibrin as a model of a preformed clot. Dissociation constants of 0.056, 0.19, and 2.44 microM, and the number of binding sites corresponding to 0.10, 0.21, and 0.13/fibrin monomer unit of fibrin polymer were found for fibrinogen, fragment DD, and fragment D1, respectively. Fragment E1 did not bind to sonicated noncross-linked or cross-linked fibrin suspensions. However, it was bound to forming fibrin clots as well as to fibrin-Celite, suggesting that the binding sites on fibrin involved in the interaction with fragment E1 may have been altered upon sonication. Affinity chromatography of various fibrinogen derivatives on a fibrin-Celite column showed that only part of the bound fragment DD was displaced by arginine, whereas fragments D1 and E1 were completely eluted under the same conditions. The results indicate that interaction of fibrinogen with the preformed fibrin clots is characterized by affinity in the nanomolar range and that binding between fibrin monomers, in the process of clot formation, could be characterized by even a higher affinity.     

Fibrin protofibril and fibrinogen binding to ADP-stimulated platelets: evidence for a common mechanism

The molecular basis of platelet-fibrin binding has been elucidated by studying interactions between platelets and protofibrils, soluble two-stranded polymers of fibrin which are intermediates on the fibrin assembly pathway. The fibrinogen degradation product, fragment D, has been used to block fibrin assembly, thus enabling the preparation of stable solutions of short protofibrils, composed of fewer than twenty fibrin monomer molecules per polymer. Fibrin protofibrils bound to ADP-activated platelets in a time- and concentration-dependent process which was effectively blocked by excess unlabelled fibrinogen, i.e., the binding was specific and appeared to involve a common receptor. ADP-stimulated cells bound approx. 3 micrograms of fibrin protofibrils/10(8) platelets, compared to 4 micrograms of fibrinogen/10(8) cells, following a 30-min incubation period at room temperature. Binding of both ligands was inhibited by high concentrations of fragment D, further indicating a similar mechanism. The kinetic data obtained were well described by an apparent first-order mechanism in which the rate constant for fibrin protofibril binding was found to be 5-fold slower than that measured for fibrinogen. Two monoclonal antibodies, each directed against the platelet glycoprotein IIb-IIIa complex, inhibited the binding of fibrin protofibrils and fibrinogen in a similar, concentration-dependent manner, providing strong evidence for a common receptor. Binding of GPRP-fibrin (soluble fibrin oligomers formed in the presence of 1 mM Gly-Pro-Arg-Pro) to ADP-stimulated platelets was also inhibited by a monoclonal antibody directed against the GPIIb-IIIa complex. Neither fibrin protofibrils nor fibrinogen bound to Glanzmann's thrombasthenic platelets, which lack normal quantities of functional glycoprotein IIb-IIIa complex, further supporting the hypothesis that fibrinogen and fibrin bind to a common platelet receptor present on the glycoprotein IIb-IIIa complex.     

Fibrinogen beta-chain tyrosine nitration is a prothrombotic risk factor

Elevated levels of circulating fibrinogen are associated with an increased risk of atherothrombotic diseases although a causative correlation between high levels of fibrinogen and cardiovascular complications has not been established. We hypothesized that a potential mechanism for an increased prothrombotic state is the post-translational modification of fibrinogen by tyrosine nitration. Mass spectrometry identified tyrosine residues 292 and 422 at the carboxyl terminus of the beta-chain as the principal sites of fibrinogen nitration in vivo. Immunoelectron microscopy confirmed the incorporation of nitrated fibrinogen molecules in fibrin fibers. The nitration of fibrinogen in vivo resulted in four distinct functional consequences: increased initial velocity of fibrin clot formation, altered fibrin clot architecture, increased fibrin clot stiffness, and reduced rate of clot lysis. The rate of fibrin clot formation and clot architecture was restored upon depletion of the tyrosine-nitrated fibrinogen molecules. An enhanced response to the knob "B" mimetic peptides Gly-His-Arg-Pro(am) and Ala-His-Arg-Pro(am) suggests that incorporation of nitrated fibrinogen molecules accelerates fibrin lateral aggregation. The data provide a novel biochemical risk factor that could explain epidemiological associations of oxidative stress and inflammation with thrombotic complications.     

Fibrinogen–Fibrin System Regulators from Bloodsuckers

Thrombin inhibitors from bloodsucking leeches and insects that block conversion of fibrinogen to fibrin are considered. Regulatory mechanisms influencing the fibrinogen–fibrin system in leeches include fibrinogen degradation, inhibition of factor XIIIa, and lysis of fibrin clots. The review also summarizes recent data on plasminogen activator from the vampire bat Desmodus rotundus and a role of fibrin as its cofactor.     

Human fibrinogen and asialo-fibrinogen: a comparison of coagulation parameters.

The effect of desialylation of fibrinogen on its conversion to fibrin has been investigated with particular reference to the kinetics of clot formation and structure. Also examined was the role of sialic acid in fibrinogen (factor I) poor in factor XIII (fibrinstabilizing factor) and factor I containing F XIII. The removal of more than 90% of the sialic acid of fibrinogen does not alter the thrombin clotting time, the clot solubility in monochloroacetic acid, the extent of cross-linking in the fibrin polymer, or the firmness and elasticity of the evolved clot. The data indicate that the sialic acid residues of fibrinogen do not contribute significantly to its conversion to fibrin by thrombin.     

Self-assembly of fibrin monomers and fibrinogen aggregation during ozone oxidation

The mechanism of self-assembly of fibrin monomers and fibrinogen aggregation during ozone oxidation has been studied by the methods of elastic and dynamic light-scattering and viscosimetry. Fibrin obtained from oxidized fibrinogen exhibits higher average fiber mass/length ratio compared with native fibrin. Fibrinogen ozonation sharply reduced the latent period preceding aggregation of protein molecules; however, the mechanism of self-assembly of ozonated and non-ozonated fibrinogen cluster was identical. In both cases flexible polymers are formed and reaching a certain critical length they form densely packed structures and aggregate. Using infrared spectroscopy, it has been shown that free radical oxidation of amino acid residues of fibrinogen polypeptide chains catalyzed by ozone results in formation of carbonyl, hydroxyl, and ether groups. It is concluded that fibrinogen peripheral D-domains are the most sensitive to ozonation, which causes local conformational changes in them. On one hand, these changes inhibit the reaction of longitudinal polymerization of monomeric fibrin molecules; on the other hand, they expose reaction centers responsible for self-assembly of fibrinogen clusters.     

The effect of “aging” of fibrinogen molecule on the structure and properties of fibrin gel

The effect of molecular “aging” of fibrinogen stimulated by preincubation in solution on the fibrin three-dimensional architecture, its ability to crosslink fibrin-stabilizing factor, and the sensitivity of fibringel to plasmin hydrolysis have been studied. The method of elastic light scattering was used to demonstrate that fibrin generated from “defective” fibrinogen had a coarser structure with a higher mean mass-length ratio of polymeric fibers compared to native fibrinogen (2.24 × 10⁹ and 1.46 × 10⁹ g/(mol cm), respectively). Crosslinking had no effect on the architecture of both control and experimental fibrin samples. Spectrophotometric and electrophoretic analysis has shown a higher sensitivity of coarse fibrin gels to plasmin. A close correlation between spontaneous local conformational reconstructions in fibrinogen molecule and its functional activity is concluded.     

Modification of fibrin network ultrastructure by Fab fragments specific for different domain of fibrinogen

Kinetics of inhibition of fibrin monomer polymerization produced by Fab fragments prepared from immunochemically purified monospecific antibodies to the surface epitopes of different domains of fibrinogen molecule has been correlated with electron microscopic observations of resulting specimens. Fab fragments prepared from anti FgD antisera were the most efficient inhibitors of thrombin-catalysed conversion of fibrinogen to fibrin; polymerization of fibrin monomers as detected spectrophotometrically was abolished at 2:1 molar ratio of anti FgD Fab fragments to fibra monomer. These Fab fragments acting as a steric hindrance of polymerization sites inhibited the first stage of fibrin monomer aggregation. Interaction of Fab fragments derived from antibodies specific for alpha 239-476 with corresponding segment of fibrinogen molecule resulted in a weak inhibition of fibrin monomer polymerization. However, fibrin obtained in the presence of these Fab fragments was significantly modified and showed no periodicity. This observation may suggest that anti alpha 239-476 Fab impaired the course of the second stage of fibrin monomer polymerization, i.e. lateral association of fibrin fibrils.     

Localization of a fibrin polymerization site

The formation of a fibrin clot is initiated after the proteolytic cleavage of fibrinogen by thrombin. The enzyme removes fibrinopeptides A and B and generates fibrin monomer which spontaneously polymerizes. Polymerization appears to occur though the interaction of complementary binding sites on the NH2-terminal and COOH-terminal (Fragment D) regions of the molecule. A peptide has been isolated from the gamma chain remnant of fibrinogen Fragment D1 which has the ability to bind to the NH2-terminal region of fibrinogen as well as to inhibit fibrin monomer polymerization. The peptide reduces the maximum rate and extent of the polymerization of thrombin or batroxobin fibrin monomer and increases the lag time. The D1 peptide does not interact with disulfide knot, fibrinogen, or Fragment D1, but it binds to thrombin-treated disulfide knot with a Kd of 1.45 X 10(-6) M at approximately two binding sites per molecule of disulfide knot. Fibrin monomer formed either by thrombin or batroxobin binds approximately two molecules of D1 peptide per molecule of fibrin monomer, indicating that the complementary site is revealed by the loss of fibrinopeptide A. The NH2-terminal sequence (Thr-Arg-Trp) and COOH-terminal sequence (Ala-Gly-Asp-Val) of the D1 peptide were determined. Therefore the gamma 373-410 region of fibrinogen contains a polymerization site which is complementary to the thrombin-activated site on the NH2-terminal region of fibrinogen.     

Molecular weight of human fibrinogen derived from phosphorus determinations

1. Fibrin clots obtained from diluted human plasma with bovine thrombin often contain amounts of phospholipids that cannot be diminished by further plasma dilution. 2. The ;cold insoluble residue' obtained during fibrinogen preparation has a higher phosphorus content than the purified fibrinogen. 3. Evidence showed that adsorption of phospholipids or phosphorus-containing fibrinopeptides on purified fibrinogen or fibrin was unlikely. 4. O-Phosphorylserine was detected in acid hydrolysates of human fibrin. 5. On the basis of phosphorus determinations the average molecular weight of human fibrinogen cannot be less than 342000 (304000-383000) for a group of ten donors, and 265000 for two other persons, assuming 1 phosphorus atom/molecule and incomplete splitting of the phosphorus-containing fibrinopeptide. Complete splitting of the phosphopeptide would require molecular weights twice as high. 6. Fibrinolysis was a possible cause of lower phosphorus contents found in isolated fibrinogen and fibrin from a donor who showed apprehension during blood collection and in a fibrinogen preparation that had been submitted to prolonged dialysis.     

Zinc binding to fibrinogen and fibrin

Zinc binding to fibrinogen and fibrin was studied by two techniques. Scatchard analysis of ultrafiltration eluates reveals that fibrinogen has multiple Zn(II)-binding sites, KD (fibrinogen) = 18 microM; n = 6. The zinc content of the "collapsed" fibrin gel supernatant was also determined by atomic absorption spectroscopy and analyzed by a Scatchard plot (KD (fibrin) = 8 microM, n = 6). In other experiments, Zn(II) did not displace 45Ca(II) from fibrin. It appears that the binding of zinc to fibrinogen or fibrin is distinct from that of calcium, and that the zinc-binding characteristics of fibrinogen and fibrin are not significantly affected by the transformation of one into the other.     

Substitution of gamma Arg-275 by Cys in an abnormal fibrinogen, "fibrinogen Osaka II". Evidence for a unique solitary cystine structure at the mutation site

In an abnormal fibrinogen with impaired fibrin monomer polymerization designed as fibrinogen Osaka II, we have identified substitution of Arg by Cys at position 275 of the gamma chain. This Cys is linked to a free cysteine molecule by a disulfide link as evidenced by fast atom bombardment mass spectrometry. This finding was supported by identification of a single cysteine released from isolated abnormal fragment D1 upon reduction. This unique cystine structure at the mutation site has not been reported heretofore in any abnormal protein including fibrinogen. The substitution may well perturb the structure required for fibrin monomer polymerization, specifically that assigned to the carboxyl-terminal D domain of fibrinogen. Indeed, isolated fragment D1 with the Cys substitution failed to inhibit thrombin-mediated clotting of normal fibrinogen and normal fibrin monomer polymerization, while normal fragment D1 inhibited them markedly. Our data seem to provide supporting evidence that the putative polymerization site(s) assigned to the D domain of fibrinogen may be structure-dependent, including the carboxyl-terminal segment of the gamma chain as well as a contiguous region that contains the gamma 275 residue.     

The role of gamma A/gamma ' fibrinogen in plasma factor XIII activation

Factor XIII zymogen activation is a complex series of events that involve fibrinogen acting in several different roles. This report focuses on the role of fibrinogen as a cofactor in factor XIII activation by thrombin. We demonstrate that fibrinogen has two distinct activities that lead to an increased rate of factor XIII activation. First, the thrombin proteolytic activity is increased by fibrin. The cleavage rates of both a small chromogenic substrate and the factor XIII activation peptide are increased in the presence of either the major fibrin isoform, gammaA/gammaA fibrin, or a minor variant form, gammaA/gamma' fibrin. This enhancement of thrombin activity by fibrin is independent of fibrin polymerization and requires only cleavage of the fibrinopeptides. Subsequently, gammaA/gamma' fibrinogen accelerates plasma factor XIII activation by a non-proteolytic mechanism. This increased rate of activation results in a slightly more rapid cross-linking of fibrin gammaA and gamma' chains and a significantly more rapid cross-linking of fibrin alpha chain multimers. Together, these results show that although both forms of fibrin increase the rate of activation peptide cleavage by thrombin, gammaA/gamma' fibrinogen also increases the rate of factor XIII activation in a non-proteolytic manner. A revised model of factor XIII activation is presented below.     

Fibrin and plasminogen structures essential to stimulation of plasmin formation by tissue-type plasminogen activator

Plasminogen activation catalysed by tissue-type plasminogen activator (t-PA) has been examined in the course of concomitant fibrin formation and degradation. Plasmin generation has been measured by the spectrophotometric method of Petersen et al. (Biochem. J. 225 (1985) 149-158), modified so as to allow for light scattering caused by polymerized fibrin. Glu1-, Lys77- and Val442-plasminogen are activated in the presence of fibrinogen, des A- and des AB-fibrin and the rate of plasmin formation is found to be greatly enhanced by both des A- and des AB-fibrin polymer. Plasmin formation from Glu1- and Lys77-plasminogen yields a sigmoidal curve, whereas a linear increase is obtained with Val442-plasminogen. The rate of plasmin formation from Glu1- and Lys77-plasminogen declines in parallel with decreasing turbidity of the fibrin polymer effector. In order to study the effect of polymerization, this has been inhibited by the synthetic polymerization site analogue Gly-Pro-Arg-Pro, by fibrinogen fragment D1 or by prior methylene blue-dependent photooxidation of the fibrinogen used. Inhibition of polymerization by Gly-Pro-Arg-Pro reduces plasmin generation to the low rate observed in the presence of fibrinogen. Antipolymerization with fragment D1 or photooxidation has the same effect on Glu1-plasminogen activation, but only partially reduces and delays the stimulatory effect on Lys77- and Val442-plasminogen activation. The results suggest that protofibril formation (and probably also gelation) of fibrin following fibrinopeptide release is essential to its stimulatory effect. The gradual increase and subsequent decline in the rate of plasmin formation from Glu1- or Lys77-plasminogen during fibrinolysis may be explained by sequential exposure, modification and destruction of different t-PA and plasminogen binding sites in fibrin polymer.     

The antifibrinolytic action of the D-dimer fragment

The effect of D-dimer on the process of plasmin hydrolysis of unstabilized and crosslinked fibrin has been studied. Less degraded early, intermediate, and late products of fibrin cleavage have been revealed by electrophoresis of reduced and nonreduced samples. The molecular mechanism of antifibrinolytic effect of the D-dimer is supposed to be determined by shielding of peptide regions of monomer fibrin, localized both in N-terminal area of beta chain and in alpha, beta, and gamma chains between D and E domains. A notion has been proposed of autoinhibition of fibrinolytic reaction as a phenomenon related to the physical-chemical regulation of fibrinogen transformation into fibrin.     

Interaction of one-chain and two-chain tissue plasminogen activator with intact and plasmin-degraded fibrin

Tissue-type plasminogen activator (t-PA) plays a central role in fibrinolysis in vivo. Although it is known to bind to fibrin, the dissociation constant (Kd) and number of moles bound per mole of fibrin monomer (n) have never been measured directly. In this study, the binding of both the one-chain form and the two-chain form of recombinant, human t-PA to fibrin was measured. Although more one-chain t-PA than two-chain t-PA is bound to fibrin, the Kd's and n's were within experimental error of each other. Significantly more t-PA is bound to clots made from fibrinogen which has been digested with plasmin than to clots made from intact fibrinogen. The additional binding was shown to be due to the formation of new set(s) of binding site(s) with dissociation constants that are 2-4 orders of magnitude tighter than the binding site present on clots made from intact fibrinogen. epsilon-Aminocaproic acid was capable of competing for the loose binding site present on both intact and degraded fibrin but had little effect on the binding of t-PA to the new site(s) formed by plasmin digestion. This increase in binding caused by plasmin-mediated proteolysis of fibrin suggests a possible mechanism for a positive regulation capable of accelerating fibrinolysis.     

Salmon fibrin glue in rats: Antibody studies

Fibrin sealants and topical thrombin preparations are often used for haemostatic and sealing applications in clinical practice. Some of these preparations contain coagulation factors from bovine sources. To minimize the risk of infection and immunogenicity connected with mammalian blood products, proteins derived from the plasma of farmed Atlantic salmon have been considered as an alternative to these mammalian sources. The purpose of this study is to characterize the immunogenicity of salmon fibrin glue in an animal model focusing on crossreactivity of IgG antibodies to host endogenous counterparts. After two immunizations with salmon fibrin glue, rats developed antibodies of IgG and IgM type to both fibrin glue components. Weak crossreactivity to endogenous fibrinogen and thrombin was seen in a subset of rats after the second application of salmon proteins. Coagulation tests showed that salmon fibrin application has no effect on coagulation profiles in mammalian hosts, consistent with previous reports that found no evidence of significant crossreactivity with host proteins. These studies support the potential suitability of salmon fibrin glue for the development of preparations with clinical impact. Before human use can be considered, however, additional data about safety of this preparation in other animal models, including large animal studies, should be obtained.     

The impact of delayed fibrinopeptide-A release on fibrin structure. Studies of an abnormal fibrinogen

The impact of delayed fibrinopeptide-A release on polymerization and structure of fibrin gels was studied utilizing a heterozygously transmitted variant fibrinogen. An arginine to histidine substitution at position 16 of the alpha chain of the abnormal fibrinogen delayed release of an abnormal fibrinopeptide-A (A) by thrombin and completely blocked release of A by reptilase. When clotted with thrombin, patient fibrin formed more slowly than normal fibrin, but clottability was normal and gel fiber mass/length ratios were decreased less than 10%. Gels formed with reptilase clotted slowly, demonstrated reduced clottability, but had normal fiber mass/length ratios. Reptilase clotted the normal but not the variant component of the patient fibrinogen. Thrombin-induced cleavage of fibrinopeptide-B prior to A occurred in these experiments, but polymerization of this species beyond trimers has been reported to be minimal under the conditions used. With time, A is removed by thrombin resulting in the slow production of normal fibrin monomer from the abnormal component. These monomers subsequently polymerize. The minimal change in gel fiber size caused by slow A release implies that fibrin fiber size is primarily a function of ionic environment and not of the sequence of peptide release.     

Complexes of the N-terminal disulfide branch point of fibrin with fibrinogen

Investigation of fibrin N-terminal disulphide knot (N-DSK) binding with fibrinogen (F) showed, that the F-N-DSK-complex represents growing polymer structure which is soluble at early polymerization stage and forms a solid phase during the further growth. This complex is characterized by constant stoichiometry expressed by formula F (N-DSK)2. A model of the complex structure as a regular copolymer of fibrinogen and N-DSK is proposed, in which neighbouring fibrinogen molecules are clamped with two N-DSK molecules. Such copolymer was never described. Since its formation is caused by specific D-E interdomain binding, it may be considered as a peculiar analogue of fibrin polymer.     

Fibrin but not adsorbed fibrinogen supports fibronectin assembly by spread platelets. Effects of the interaction of alphaIIb beta3 with the C terminus of the fibrinogen gamma-chain

We investigated the assembly of soluble fibronectin by lysophosphatidic acid-activated platelets adherent to fibrinogen or fibrin. More fibronectin was assembled by activated platelets spread on fibrin matrices than by platelets spread on adsorbed fibrinogen. The difference between platelets adherent to fibrinogen and fibrin occurred under both static and flow conditions. Similar differences were seen in binding of the 70-kDa N-terminal fragment of fibronectin that recognizes fibronectin assembly sites on adherent cells. Antibody and peptide blocking studies demonstrated that alphaIIb beta3 integrin mediates platelet adhesion to fibrinogen, whereas both alphav beta3 and alphaIIb beta3 mediate platelet adhesion to fibrin. The hypothesis that engagement of the C-terminal QAGDV sequence of the fibrinogen gamma-chain by alphaIIb beta3 inhibits the ability of the platelet to assemble fibronectin was tested by several experiments. Activated platelets adherent to adsorbed mutant fibrinogen lacking the QAGDV sequence (gammadelta5FG) were assembly-competent, as were platelets adherent to adsorbed normal fibrinogen that had been pretreated with the 7E9 antibody to the C terminus of the gamma-chain. Moreover, adsorbed normal fibrinogen but not gammadelta5FG suppressed the ability of co-adsorbed fibronectin to direct assembly of soluble fibronectin by spread platelets. The suppressive effect was lost when a surface of co-adsorbed fibronectin and fibrinogen was pretreated with 7E9. These results support a model in which the engagement of alphaIIb beta3 by the C-terminal sequence of the fibrinogen gamma-chain initiates signals that suppress subsequent fibronectin assembly by spread platelets. This interaction is less dominant when platelets adhere to fibrin, resulting in enhanced fibronectin assembly.