Mechanics and Composition of Middle Cerebral Arteries from Simulated Microgravity Rats with and without 1-h/d –Gx Gravitation

Background

To elucidate further from the biomechanical aspect whether microgravity-induced cerebral vascular mal-adaptation might be a contributing factor to postflight orthostatic intolerance and the underlying mechanism accounting for the potential effectiveness of intermittent artificial gravity (IAG) in preventing this adverse effect.

Methodology/Principal Findings

Middle cerebral arteries (MCAs) were isolated from 28-day SUS (tail-suspended, head-down tilt rats to simulate microgravity effect), S+D (SUS plus 1-h/d −G_x gravitation by normal standing to simulate IAG), and CON (control) rats. Vascular myogenic reactivity and circumferential stress-strain and axial force-pressure relationships and overall stiffness were examined using pressure arteriography and calculated. Acellular matrix components were quantified by electron microscopy. The results demonstrate that myogenic reactivity is susceptible to previous pressure-induced, serial constrictions. During the first-run of pressure increments, active MCAs from SUS rats can strongly stiffen their wall and maintain the vessels at very low strains, which can be prevented by the simulated IAG countermeasure. The strains are 0.03 and 0.14 respectively for SUS and S+D, while circumferential stress being kept at 0.5 (10⁶ dyn/cm²). During the second-run pressure steps, both the myogenic reactivity and active stiffness of the three groups declined. The distensibility of passive MCAs from S+D is significantly higher than CON and SUS, which may help to attenuate the vasodilatation impairment at low levels of pressure. Collagen and elastin percentages were increased and decreased, respectively, in MCAs from SUS and S+D as compared with CON; however, elastin was higher in S+D than SUS rats.

Conclusions

Susceptibility to previous myogenic constrictions seems to be a self-limiting protective mechanism in cerebral small resistance arteries to prevent undue cerebral vasoconstriction during orthostasis at 1-G environment. Alleviating of active stiffening and increasing of distensibility of cerebral resistance arteries may underlie the countermeasure effectiveness of IAG.     

Jump exercise during remobilization restores integrity of the trabecular architecture after tail suspension in young rats.

Three-dimensional trabecular architecture was investigated in the femora of tail-suspended young growing rats, and the effects of jump exercise during remobilization were examined. Five-week-old male Wistar rats (n = 35) were randomly assigned to five body weight-matched groups: tail-suspended group (SUS; n = 7); sedentary control group for SUS (S(CON); n = 7); spontaneous recovery group after tail suspension (S+R(CON), n = 7); jump exercise group after tail suspension (S+R(JUM); n = 7); and age-matched control group for S+R(CON) and S+R(JUM) without tail suspension and exercise (S(CON)+R(CON); n = 7). Rats in SUS and S(CON) were killed immediately after tail suspension for 14 days. The jump exercise protocol consisted of 10 jumps/day, 5 days/wk, and jump height was 40 cm. Bone mineral density (BMD) of the femur and three-dimensional trabecular bone architecture at the distal femoral metaphysis were measured. Tail suspension induced a 13.6% decrease in total femoral BMD (P < 0.001) and marked deterioration of trabecular architecture. After 5 wk of free remobilization, femoral BMD, calf muscle weight, and body weight returned to age-matched control levels, but trabeculae remained thinner and less connected. On the other hand, S+R(JUM) rats showed significant increases in trabecular thickness, number, and connectivity compared with S+R(CON) rats (62.8, 31.6, and 24.7%, respectively; P < 0.05), and these parameters of trabecular architecture returned to the levels of S(CON)+R(CON). These results indicate that suspension-induced trabecular deterioration persists after remobilization, but jump exercise during remobilization can restore the integrity of trabecular architecture and bone mass in the femur in young growing rats.     

A constrained mixture model for developing mouse aorta

Mechanical stresses influence the structure and function of adult and developing blood vessels. When these stresses are perturbed, the vessel wall remodels to return the stresses to homeostatic levels. Constrained mixture models have been used to predict remodeling of adult vessels in response to step changes in blood pressure, axial length and blood flow, but have not yet been applied to developing vessels. Models of developing blood vessels are complicated by continuous and simultaneous changes in the mechanical forces. Understanding developmental growth and remodeling is important for treating human diseases and designing tissue-engineered blood vessels. This study presents a constrained mixture model for postnatal development of mouse aorta with multiple step increases in pressure, length and flow. The baseline model assumes that smooth muscle cells (SMCs) in the vessel wall immediately constrict or dilate the inner radius after a perturbation to maintain the shear stress and then remodel the wall thickness to maintain the circumferential stress. The elastin, collagen and SMCs have homeostatic stretch ratios and passive material constants that do not change with developmental age. The baseline model does not predict previously published experimental data. To approximate the experimental data, it must be assumed that the SMCs dilate a constant amount, regardless of the step change in mechanical forces. It must also be assumed that the homeostatic stretch ratios and passive material constants change with age. With these alterations, the model approximates experimental data on the mechanical properties and dimensions of aorta from 3- to 30-day-old mice.     

Carotid artery mechanical properties and stresses quantified using in vivo data from normotensive and hypertensive humans

The goal of this study was to model the in vivo non-linear mechanical behavior of human common carotid arteries (CCAs) and then to compare wall stresses and associated contributions of micro-constituents in normotensive (NT) and treated hypertensive (HT) subjects. We used an established theoretical model of 3D arterial mechanics that assumes a hyperelastic, anisotropic, active–passive, and residually stressed wall. In vivo data were obtained non-invasively from CCAs in 16 NT (21–64 years old) and 25 treated HT (44–69 years old) subjects. The associated quasi-static boundary value problem was solved semi-analytically over a cardiac cycle while accounting for surrounding perivascular tissue. Best-fit values of model parameters, including those describing contributions by intramural elastin, fibrillar collagen, and vascular smooth muscle, were estimated by a non-linear least-squares method. The model (1) captured temporal changes in intraluminal pressure, (2) estimated wall stress fields that appeared to reflect the presence or absence of age and disease, and (3) suggested changes in mechanical characteristics of wall micro-constituents despite medical treatment of hypertension. For example, age was positively correlated with residual stresses and altered fibrillar collagen in NT subjects, which indirectly validated the modeling, and HT subjects had higher levels of stresses, increased smooth muscle tone, and a stiffer elastin-dominated matrix despite treatment. These results are consistent with prior reports on effects of age and hypertension, but provide increased insight into evolving contributions of cell and matrix mechanics to arterial behavior in vivo.     

Micrometer scale ex vivo multiphoton imaging of unstained arterial wall structure.

BACKGROUND: We characterize the application of multiphoton microscopy to the observation of the extracellular matrix of fresh unstained vessels. METHOD: Combined two-photon-excited fluorescence (2PEF) and second harmonic generation (SHG) imaging of large arteries reveals the architecture of elastin and collagen fibers in the vessel wall with remarkable specificity. RESULTS: We present elastin/collagen imaging in unstained rat vessels at both micrometer and whole vessel scales, and we characterize the optical properties of rat carotid artery and aorta walls. We apply this method to evidence deleterious effects of residual doses of a pesticide on the vessel wall. CONCLUSION: This study illustrates the potential of 2PEF/SHG microscopy for pharmacological studies in unlabeled arteries.     

The effect of a thermal renal denervation cycle on the mechanical properties of the arterial wall

The aim of this study was to determine the effect that a thermal renal denervation cycle has on the mechanical properties of the arterial wall. Porcine arterial tissue specimens were tested in three groups: native tissue, decellularized tissue, decellularized with collagen digestion (e.g. elastin only). One arterial specimen was used as an unheated control specimen while another paired specimen was subjected to a thermal cycle of 70 °C for 120 s (n=10). The specimens were subjected to tensile loading and a shrinkage analysis. We observed two key results: The mechanical properties associated with the elastin extracellular matrix (ECM) were not affected by the thermal cycle. The effect of the thermal cycle on the collagen (ECM) was significant, in both the native and decellularized groups the thermal cycle caused a statistically significant decrease in stiffness, and failure strength, moreover the native tissue demonstrated a 27% reduction in lumen area post exposure to the thermal cycle. We have demonstrated that a renal denervation thermal cycle can significantly affect the mechanical properties of an arterial wall, and these changes in stiffness and failure strength were associated with alterations to the collagen rather than the elastin extracellular matrix component.     

Imaging coronary artery microstructure using second-harmonic and two-photon fluorescence microscopy

The microstructural basis for the mechanical properties of blood vessels has not been directly determined because of the lack of a nondestructive method that yields a three-dimensional view of these vascular wall constituents. Here, we demonstrate that multiphoton microscopy can be used to visualize the microstructural basis of blood vessel mechanical properties, by combining mechanical testing (distension) of excised porcine coronary arteries with simultaneous two-photon excited fluorescence and second-harmonic generation microscopy. Our results show that second-harmonic generation signals derived from collagen can be spectrally isolated from elastin and smooth muscle cell two-photon fluorescence. Two-photon fluorescence signals can be further characterized by emission maxima at 495 nm and 520 nm, corresponding to elastin and cellular contributions, respectively. Two-dimensional reconstructions of spectrally fused images permit high-resolution visualization of collagen and elastin fibrils and smooth muscle cells from intima to adventitia. These structural features are confirmed by coregistration of multiphoton microscopy images with conventional histology. Significant changes in mean fibril thickness and overall wall dimension were observed when comparing no load (zero transmural pressure) and zero-stress conditions to 30 and 180 mmHg distension pressures. Overall, these data suggest that multiphoton microscopy is a highly sensitive and promising technique for studying the morphometric properties of the microstructure of the blood vessel wall.     

Alterations in canine coronary arteries produced by chronic cigarette smoking

Segments of left circumflex coronary artery were obtained from beagles that had been exposed to cigarette smoke for 2 years and from nonsmoking controls. A ring sample from each was used to determine passive (0-Ca2+ and 2 mM EGTA) and active (75 mM K+) force-length relations. Other contiguous samples were used to determine collagen and elastin content, water content and distribution, and total electrolyte content. No significant differences were found in passive mechanical properties or the collagen and elastin content of arteries from the two groups of animals. Maximum values of active force development were found to be increased in arteries from smoking dogs as were values on the ascending part of the active force-length curve. Total water content and the distribution space of an extracellular marker (60Co-EDTA) were not significantly different among arteries from the two groups. This along with the similarity of total electrolyte contents suggests that values of cell volume were not different between the two groups and that the above differences in active force development represent alterations in smooth muscle cells at the subcellular level. These results suggest that the contribution of chronic smoking as one of a group of cardiac risk factors may be due to an effect of augmenting coronary artery smooth muscle contractility.     

The layered structure of coronary adventitia under mechanical load

The mechanical loading-deformation relation of elastin and collagen fibril bundles is fundamental to understanding the microstructural properties of tissue. Here, we use multiphoton microscopy to obtain quantitative data of elastin and collagen fiber bundles under in situ loading of coronary adventitia. Simultaneous loading-imaging experiments on unstained fresh coronary adventitia allowed morphometric measurements of collagen and elastin fibril bundles and their individual deformation. Fiber data were analyzed at five different distension loading points (circumferential stretch ratio λ_θ = 1.0, 1.2, 1.4, 1.6, and 1.8) at a physiological axial stretch ratio of λ_axial = 1.3. Four fiber geometrical parameters were used to quantify the fibers: orientation angle, waviness, width, and area fraction. The results show that elastin and collagen fibers in inner adventitia form concentric densely packed fiber sheets, and the fiber orientation angle, width, and area fraction vary transmurally. The extent of fiber deformation depends on the initial orientation angle at no-distension state (λ_θ = 1.0 and λ_axial = 1.3). At higher distension loading, the orientation angle and waviness of fibers decrease linearly, but the width of collagen fiber is relatively constant at λ_θ = 1.0–1.4 and then decrease linearly for λ_θ ≥ 1.4. A decrease of the relative dispersion (SD/mean) of collagen fiber waviness suggests a heterogeneous mechanical response to loads. This study provides fundamental microstructural data for coronary artery biomechanics and we consider it seminal for structural models.     

Biomechanical and morphological properties of the multiparous ovine vagina and effect of subsequent pregnancy

Pelvic floor soft tissues undergo changes during the pregnancy. However, the degree and nature of this process is not completely characterized. This study investigates the effect of subsequent pregnancy on biomechanical and structural properties of ovine vagina. Vaginal wall from virgin, pregnant (in their third pregnancy) and parous (one year after third vaginal delivery) Swifter sheep (n = 5 each) was harvested. Samples for biomechanics and histology, were cut in longitudinal axis (proximal and distal regions). Outcome measurements describing Young’s modulus, ultimate stress and elongation were obtained from stress-strain curves. For histology samples were stained with Miller's Elastica staining. Collagen, elastin and muscle cells and myofibroblasts contents were estimated, using image processing techniques. Statistical analyses were performed in order to determine significant differences among experimental groups. Significant regional differences were identified. The proximal vagina was stiffer than distal, irrespective the reproductive status. During the pregnancy proximal vagina become more compliant than in parous (+47.45%) or virgin sheep (+64.35%). This coincided with lower collagen (−15 to −21%), higher elastin (+30 to +60%), and more smooth muscle cells (+17 to +37%). Vaginal tissue from parous ewes was weaker than of virgins, coinciding with lower collagen (−10%), higher elastin (+50%), more smooth muscle cells (+20%). It could be proposed that after pregnancy biomechanical properties of vagina do not recover to those of virgins. Since elastin has a significant influence on the compliance of soft tissues and collagen is the main “actor” regarding strength, histological analysis performed in this study justifies the mechanical behavior observed.     

间断性人工重力对模拟失重大鼠颈总动脉平滑肌细胞凋亡的影响

目的:研究3周模拟失重大鼠颈总动脉平滑肌细胞凋亡的变化及间断性人工重力对其的影响。方法:以尾部悬吊大鼠(SUS)模拟失重,同期每天悬吊23h、站立1h(STD)模拟间断性人工重力的对抗效果,用M30染色及Tunel染色方法观察3周SUS组、同步对照(CON)组及STD组颈总动脉平滑肌细胞早期和中晚期的凋亡情况,并用免疫组织化学方法及Western blot印迹方法观察各组大鼠颈总动脉组织Caspase-3的蛋白表达变化。结果:与CON组比较,SUS组大鼠颈总动脉平滑肌细胞M30染色阳性细胞明显减少,STD组M30染色阳性细胞较CON组及SUS组显著增加;SUS组Tunel染色阳性细胞较CON组及STD组显著减少,STD组Tunel染色阳性细胞较CON组及SUS组显著增加;SUS组Caspase-3的表达较CON组显著降低(P<0.05),STD组Caspase-3的表达较CON组及SUS组显著增高(P<0.01)。结论:模拟失重可引起大鼠颈总动脉平滑肌细胞凋亡减少,每日1 h的-Gx对抗使颈总动脉的凋亡增加。Caspase-3可能在调控模拟失重所致血管组织平滑肌细胞的凋亡中发挥作用。     

Effects of hydrogen sulfide on hypoxic pulmonary vascular structural remodeling

To study the role of hydrogen sulfide (H2S) in hypoxic pulmonary vascular structural remodeling (HPVSR), a total of 24 Wistar rats were randomly divided into three groups: control group (n = 8), hypoxia group (n = 8) and hypoxia with sodium hydrosulfide (hy + NaHS) group (n = 8). The mean pulmonary artery pressure (mPAP), plasma H2S and the percentage of muscularized arteries (MA), partially muscularized arteries (PMA) and nonmuscularized arteries (NMA) in small pulmonary vessels were measured. Collagen I and III, elastin, transforming growth factor-beta3 (TGF-beta3), proliferative cell nuclear antigen (PCNA) and human urotensin II(U-II) expressions were detected by immunohistochemical assay. The mRNA expressions of procollagen I and III, matrix metalloproteinase-1 (MMP-1) and tissue inhibitor of metalloproteinease-1 (TIMP-1) were detected by in situ hybridization. The results showed that NaHS significantly increased plasma H2S, decreased mPAP and the percentage of MA and PMA of small pulmonary vessels in rats under hypoxia. Meanwhile, NaHS inhibited the proliferation of pulmonary artery smooth muscle cells (PASMCs) represented by a decrease in the expressions of PCNA and human U-II in pulmonary artery wall. NaHS reduced the expression of collagen I and III, elastin and TGF-beta3 protein and decreased the expressions of procollagen I and III mRNA in pulmonary arteries of rats under hypoxia, but it did not impact the ratio of TIMP-1 mRNA to MMP-1mRNA in pulmonary arteries of rats under hypoxia. These data suggested that H2S played an important role in the development of HPVSR.     

Elasticity of passive blood vessels: a new concept

The mechanical properties of passive blood vessels are generally thought to depend on the parallel arrangement of elastin and collagen with linear elasticity and collagen recruitment depending on vessel strain [hook-on (HO) model]. We evaluated an alternative model [serial element (SE) model] consisting of the series arrangement of an infinite number of elements, each containing elastin with a constant elastic modulus and collagen that switches stepwise from slack (zero stress) to fully rigid (infinite stiffness) on ongoing element strain. Both models were implemented with Weibull distributions for collagen recruitment strain (HO model) and collagen tightening strain (SE model). The models were tested in experiments on rat mesenteric small arteries. Strain-tension relations were obtained before and after two rounds of digestion by collagenase. Both models fitted the data prior to digestion. However, for the HO model, this required unrealistically low estimates for collagen recruitment or elastic modulus and unrealistically high estimates for distension of collagen fibers. Furthermore, the data after digestion were far better predicted by the SE model compared with the HO model. Finally, the SE model required one parameter less (collagen elastic modulus). Therefore, the SE model provides a valuable starting point for the understanding of vascular mechanics and remodeling of vessels.     

Role of elastin anisotropy in structural strain energy functions of arterial tissue

The vascular wall exhibits nonlinear anisotropic mechanical properties. The identification of a strain energy function (SEF) is the preferred method to describe its complex nonlinear elastic properties. Earlier constituent-based SEF models, where elastin is modeled as an isotropic material, failed in describing accurately the tissue response to inflation–extension loading. We hypothesized that these shortcomings are partly due to unaccounted anisotropic properties of elastin. We performed inflation–extension tests on common carotid of rabbits before and after enzymatic degradation of elastin and applied constituent-based SEFs, with both an isotropic and an anisotropic elastin part, on the experimental data. We used transmission electron microscopy (TEM) and serial block-face scanning electron microscopy (SBFSEM) to provide direct structural evidence of the assumed anisotropy. In intact arteries, the SEF including anisotropic elastin with one family of fibers in the circumferential direction fitted better the inflation–extension data than the isotropic SEF. This was supported by TEM and SBFSEM imaging, which showed interlamellar elastin fibers in the circumferential direction. In elastin-degraded arteries, both SEFs succeeded equally well in predicting anisotropic wall behavior. In elastase-treated arteries fitted with the anisotropic SEF for elastin, collagen engaged later than in intact arteries. We conclude that constituent-based models with an anisotropic elastin part characterize more accurately the mechanical properties of the arterial wall when compared to models with simply an isotropic elastin. Microstructural imaging based on electron microscopy techniques provided evidence for elastin anisotropy. Finally, the model suggests a later and less abrupt collagen engagement after elastase treatment.     

Synergistic effect of angiotensin II and nitric oxide synthase inhibitor in increasing aortic stiffness in mice

Although they are implicated on their own as risk factors for cardiovascular disease, the potential link between nitric oxide (NO) deficiency, ANG II, and vascular stiffening has not been tested before. We evaluated the role of chronic ANG II treatment and NO deficiency, alone and in combination, on aortic stiffness in mice and tested parameters contributing to increases in active or passive components of vascular stiffness, including blood pressure, vascular smooth muscle contractility, and extracellular matrix components. Untreated (control) mice and mice treated with a NO synthase (NOS) inhibitor [N(omega)-nitro-L-arginine methyl ester (L-NAME), 0.5 g/l] were implanted with osmotic minipumps delivering ANG II (500 ng.kg(-1).min(-1)) for 28 days. Aortic stiffness was then measured in vivo by pulse wave velocity (PWV) and ex vivo by load-strain analysis to obtain values of maximal passive stiffness (MPS). Blood pressure and aortic contractility ex vivo were measured. ANG II treatment or NOS inhibition with L-NAME did not independently increase vascular stiffness; however, the combined treatments worked synergistically to increase PWV and MPS. The combined treatments of ANG II + L-NAME also significantly increased aortic wall collagen content while decreasing elastin. These novel results suggest that NO deficiency and ANG II act synergistically to increase aortic stiffness in mice predominantly via changes in aortic wall collagen/elastin ratio.     

Mechanical properties of rat middle cerebral arteries with and without myogenic tone

The inner diameter and wall thickness of rat middle cerebral arteries (MCAs) were measured in vitro in both a pressure-induced, myogenically-active state and a drug-induced, passive state to quantify active and passive mechanical behavior. Elasticity parameters from the literature (stiffness derived from an exponential pressure-diameter relationship, beta, and elasticity in response to an increment in pressure, Einc-p) and a novel elasticity parameter in response to smooth muscle cell (SMC) activation, Einc-a, were calculated. beta for all passive MCAs was 9.11 +/- 1.07 but could not be calculated for active vessels. The incremental stiffness increased significantly with pressure in passive vessels; Einc-p (10(6) dynes/cm2) increased from 5.6 +/- 0.5 at 75 mmHg to 14.7 +/- 2.4 at 125 mmHg, (p < 0.05). In active vessels, Einc-p (10(6) dynes/cm2) remained relatively constant (5.5 +/- 2.4 at 75 mmHg and 6.2 +/- 1.0 at 125 mmHg). Einc-a (10(6) dynes/cm2) increased significantly with pressure (from 15.1 +/- 2.3 at 75 mmHg to 49.4 +/- 12.6 at 125 mmHg, p < 0.001), indicating a greater contribution of SMC activity to vessel wall stiffness at higher pressures.     

Multiphoton microscopy observations of 3D elastin and collagen fiber microstructure changes during pressurization in aortic media

Elastin and collagen fibers play important roles in the mechanical properties of aortic media. Because knowledge of local fiber structures is required for detailed analysis of blood vessel wall mechanics, we investigated 3D microstructures of elastin and collagen fibers in thoracic aortas and monitored changes during pressurization. Using multiphoton microscopy, autofluorescence images from elastin and second harmonic generation signals from collagen were acquired in media from rabbit thoracic aortas that were stretched biaxially to restore physiological dimensions. Both elastin and collagen fibers were observed in all longitudinal–circumferential plane images, whereas alternate bright and dark layers were observed along the radial direction and were recognized as elastic laminas (ELs) and smooth muscle-rich layers (SMLs), respectively. Elastin and collagen fibers are mainly oriented in the circumferential direction, and waviness of collagen fibers was significantly higher than that of elastin fibers. Collagen fibers were more undulated in longitudinal than in radial direction, whereas undulation of elastin fibers was equibiaxial. Changes in waviness of collagen fibers during pressurization were then evaluated using 2-dimensional fast Fourier transform in mouse aortas, and indices of waviness of collagen fibers decreased with increases in intraluminal pressure. These indices also showed that collagen fibers in SMLs became straight at lower intraluminal pressures than those in EL, indicating that SMLs stretched more than ELs. These results indicate that deformation of the aorta due to pressurization is complicated because of the heterogeneity of tissue layers and differences in elastic properties of ELs, SMLs, and surrounding collagen and elastin.     

A microstructurally driven model for pulmonary artery tissue

A new constitutive model for elastic, proximal pulmonary artery tissue is presented here, called the total crimped fiber model. This model is based on the material and microstructural properties of the two main, passive, load-bearing components of the artery wall, elastin, and collagen. Elastin matrix proteins are modeled with an orthotropic neo-Hookean material. High stretch behavior is governed by an orthotropic crimped fiber material modeled as a planar sinusoidal linear elastic beam, which represents collagen fiber deformations. Collagen-dependent artery orthotropy is defined by a structure tensor representing the effective orientation distribution of collagen fiber bundles. Therefore, every parameter of the total crimped fiber model is correlated with either a physiologic structure or geometry or is a mechanically measured material property of the composite tissue. Further, by incorporating elastin orthotropy, this model better represents the mechanics of arterial tissue deformation. These advancements result in a microstructural total crimped fiber model of pulmonary artery tissue mechanics, which demonstrates good quality of fit and flexibility for modeling varied mechanical behaviors encountered in disease states.     

Arterial Extracellular Matrix: A Mechanobiological Study of the Contributions and Interactions of Elastin and Collagen

The complex network structure of elastin and collagen extracellular matrix (ECM) forms the primary load bearing components in the arterial wall. The structural and mechanobiological interactions between elastin and collagen are important for properly functioning arteries. Here, we examined the elastin and collagen organization, realignment, and recruitment by coupling mechanical loading and multiphoton imaging. Two-photon excitation fluorescence and second harmonic generation methods were performed with a multiphoton video-rate microscope to capture real time changes to the elastin and collagen structure during biaxial deformation. Enzymatic removal of elastin was performed to assess the structural changes of the remaining collagen structure. Quantitative analysis of the structural changes to elastin and collagen was made using a combination of two-dimensional fast Fourier transform and fractal analysis, which allows for a more complete understanding of structural changes. Our study provides new quantitative evidence, to our knowledge on the sequential engagement of different arterial ECM components in response to mechanical loading. The adventitial collagen exists as large wavy bundles of fibers that exhibit fiber engagement after 20% strain. The medial collagen is engaged throughout the stretching process, and prominent elastic fiber engagement is observed up to 20% strain after which the engagement plateaus. The fiber orientation distribution functions show remarkably different changes in the ECM structure in response to mechanical loading. The medial collagen shows an evident preferred circumferential distribution, however the fiber families of adventitial collagen are obscured by their waviness at no or low mechanical strains. Collagen fibers in both layers exhibit significant realignment in response to unequal biaxial loading. The elastic fibers are much more uniformly distributed and remained relatively unchanged due to loading. Removal of elastin produces similar structural changes in collagen as mechanical loading. Our study suggests that the elastic fibers are under tension and impart an intrinsic compressive stress on the collagen.