Biosynthesis of the outer membrane receptor for vitamin B12, E colicins, and bacteriophage BF23 by Escherichia coli: kinetics of phenotypic expression after the introduction of bfe+ and bfe alleles.

The bfe locus codes for the cell surface receptor for vitamin B12, the E colicins, and bacteriophage BF23 in the Escherichia coli outer membrane. When the bfe+ allele, which is closely linked to the argH locus, was introduced into an argH bfe recipient by conjugation, arg+ recombinant cells rapidly and simultaneously acquired sensitivity to colicin E3 and phage BF23. In the reciprocal experiment introducing bfe into an argH bfe+ recipient, it was found that colicin E3-resistant, arg+ cells began to appear shortly after the arg+ recombinant population began to divide. This was far earlier than would have been predicted on the basis of 220 receptors per haploid cell. Moreover, there was a lag between the appearance of colicin resistance and the appearance of resistance to killing by phage BF23, and hence a period of time during which some arg+ recombinant cells were sensitive to the phage but resistant to the colicin. Colicin E3 added to cells during this period of time protected against phage killing, indicating that the colicin-resistant cells still had receptors capable of binding colicin on their surface. The modification of the phenotypic expression of colicin and phage resistance by inhibitors of deoxyribonucleic acid, ribonucleic acid, and protein synthesis was also investigated. The results obtained indicate that the receptor protein coded for by the bfe locus can exist on the cell surface in several different functional states.     

Import-defective colicin B derivatives mutated in the TonB box

The pore-forming colicin B is taken up into Escherichia coli by a receptor and TonB-dependent process. The receptor and colicin B both contain a similar amino acid sequence, close to the N-terminal end, termed the TonB box. Point mutations were introduced into the TonB-box region of the colicin B structural gene cba resulting in colicin B derivatives which were partially or totally inactive against E. coli cells. All derivatives still bound to the receptor. An inactive derivative killed cells when translocated across the outer membrane by osmotic shock treatment, and formed pores in planar lipid bilayer membranes identical to the wild-type colicin. Some of the mutations were partially suppressed by mutations in the tonB structural gene. It was concluded that the TonB-box mutations define a region that is involved in the uptake of colicin B across the outer membrane.     

Localization and assembly into the Escherichia coli envelope of a protein required for entry of colicin A.

Mutations in tolQ, previously designated fii, render cells tolerant to high concentrations of colicin A. In addition, a short deletion in the amino-terminal region of colicin A (amino acid residues 16 to 29) prevents its lethal action, although this protein can still bind the receptor and forms channels in planar lipid bilayers in vitro. These defects in translocation across the outer membrane in the tolQ cells or the colicin A mutant cannot be bypassed by osmotic shock. The TolQ protein, which is constitutively expressed at a low level, was studied in recombinant plasmid constructs allowing the expression of various TolQ fusion proteins under the control of the inducible caa promoter. The TolQ protein was thus "tagged" with an epitope from the colicin A protein for which a monoclonal antibody is available. A fusion protein containing the entire TolQ protein plus the 30 N-terminal residues of colicin A was shown to complement the tolQ mutation. Pulse-chase labeling followed by gradient fractionation indicated that the bulk of the overproduced fusion protein was rapidly incorporated into the inner membrane, with small amounts localized to regions corresponding to the attachment sites between inner and outer membranes and to the outer membrane itself. However, most of the protein was rapidly degraded, leaving only that localized to the attachment sites and the outer membrane remaining at very late times of chase.     

Ultrastructural aspects of fragility of Pseudomonas aeruginosa outer membrane devoid of protein F

The protein F-deficient cells of Pseudomonas aeruginosa were previously found to be more susceptible to osmotic shock than the sufficient cells (Gotoh et al., J. Bacteriol., in press). The protein F-deficient cells were observed by the thin-section method of electron microscopy to determine the effects of osmotic shock. The osmotic shock induced breakage of the protein F-deficient outer membrane, while it had no effect on the protein F-sufficient outer membrane. These results suggested that the cells lost their viability by the osmotic shock caused by fragility of the outer membrane.     

Domains of colicin M involved in uptake and activity

Colicin M inhibits murein biosynthesis by interfering with bactoprenyl phosphate carrier regeneration. It belongs to the group B colicins the uptake of which through the outer membrane depends on the Tong, ExbB and ExbD proteins. These colicins contain a sequence, called the Tong box, which has been implicated in transport via Tong. Point mutations were introduced by PCR into the TonB box of the structural gene for colicin M, cma, resulting in derivatives that no longer killed cells. Mutations in the tonB gene suppressed, in an allele-specific manner, some of the cma mutations, suggesting that interaction of colicin M with Tong may be required for colicin M uptake. Among the hydroxylamine-generated colicin M-inactive cma mutants was one which carried cysteine in place of arginine at position 115. This Colicin derivative still bound to the FhuA receptor and killed cells when translocated across the outer membrane by osmotic shock treatment. It apparently represents a new type of transport-deficient colicin M. Additional hydroxylamine-generated inactive derivatives of colicin M carried mutations centered on residues 193–197 and 223–252. Since these did not kill osmotically shocked cells the mutations must be located in a region which is important for colicin M activity. It is concluded that the Tong box at the N-terminal end of colicin M must be involved in colicin uptake via Tong across the outer membrane and that the C-terminal portion of the molecule is likely to contain the activity domain.     

Uptake of ferrienterochelin by Escherichia coli: energy dependent stage of uptake.

The uptake of the siderophore-iron complex ferrienterochelin was found to be strongly dependent upon an energized membrane state, as demonstrated by its sensitivity to dinitrophenol, azide, and cyanide. Ferrienterochelin uptake may also be dependent upon phosphate bond energy, as indicated by sensitivity to arsenate and iodoacetic acid. Although the adenosine triphosphatase does not appear to be involved in this energy coupling mechanism, ferrienterochelin uptake was shown to be less dependent upon phosphate bond energy than was glutamine uptake. Sensitivity of ferrienterochelin uptake to osmotic shock was shown to be due to the release of a ferrienterochelin binding compound located in the outer membrane of the cells and probably identical to the colicin B receptor protein.     

Comparison of the uptake systems for the entry of various BtuB group colicins into Escherichia coli

Colicins A, E1, E2 and E3 belong to the BtuB group of colicins. The NH2-terminal region of colicin A is required for translocation, and defects in this region cannot be overcome by osmotic shock of sensitive cells. In addition to BtuB, colicin A requires OmpF for efficient uptake by sensitive cells. The roles of BtuB and OmpF in translocation and binding to the receptor of the colicins A, E1, E2 and E3 were compared. The results suggest that for colicin A OmpF is used both as a receptor and for translocation across the outer membrane. In contrast, for colicin E1, OmpF is used neither as a receptor nor for translocation. For colicins E2 and E3, the situation is intermediate: only BtuB is used as a receptor but both BtuB and OmpF are involved in the translocation step.     

Functional domains of colicin M

The structure of colicin M of Escherichia coli was studied with regard to its organization into functional domains. A proteolytic fragment with an M_r of 24,000 was isolated which comprised the carboxyterminal portion of the protein. It adsorbed to the outer membrane receptor protein and inhibited killing of cells by colicin M and by phage T5 that uses the same receptor. The fragment killed cells when the outer membrane was rendered permeable to macromolecules for a short time by the osmotic shock procedure. It is concluded that the fragment contains the receptor binding site and the active center but is lacking the sequence required for transport into cells.The carboxy-terminal amino acid sequence-Lys-Arg of the fragment was identical to that obtained from colicin M. Release of lysine and arginine led to inactivation of colicin M. The sequence of the first 39 amino acids of the amino terminal end of colicin M was determined.Abbreviation EGTA ethylene glyco-bis (-aminoethyl ether)-N-N-tetraacetate     

Functional stability of the bfe and tonB gene products in Escherichia coli.

The expression of several functional properties of the products of the bfe and tonB genes in Escherichia coli was measured after the specific termination of the synthesis of the products of these genes. This was accomplished by the use of a temperature-sensitive amber suppressor mutation, which allowed control, by manipulation of the growth temperature, of the level of product formed from suppressible mutant alleles of the bfe or tonB gene. The bfe product is an outer membrane receptor protein for vitamin B12, the E-colicins, and bacteriophage BF23. The identity of the tonB product is unknown, but it is necessary for a subsequent step of uptake of vitamin B12, iron chelates, all of the group B colicins, and bacteriophages T1 and phi 80. Results from a different experimental system had shown that the termination of expression of the bfe locus was rapidly followed by loss of sensitivity to colicins E2 and E3 and, subsequently, to bacteriophage BF23. This was confirmed with this experimental system. Receptors that were no longer functional for colicin or phage uptake remained fully effective for B12 uptake, showing that receptors are stable on the cell surface. This supports previous contentions for the presence of different functional states for colicin receptors. The functional properties of the tonB product, measured by B12 uptake or sensitivity to the group B colicin D, were unstable, declining extensively after cessation of its synthesis.     

Protection of Escherichia coli from the lethal effect of colicins by high osmotic pressure

The sensitivity of Escherichia coli to the lethal effect of colicin E(2) was reduced by elevation of osmotic pressure of the incubation medium. Optimal protection of the cells from the lethal effect of colicin E(2) was achieved with 0.6 to 0.8 m NaCl or with 0.8 m sucrose containing 0.01 m MgSO(4). Under such conditions, the degradation of deoxyribonucleic acid caused by colicin E(2) was also suppressed markedly. It was concluded that a high concentration of sucrose with Mg(++) might prevent the action of the adsorbed colicin E(2). A similar protection was observed against the lethal effect of colicin K.     

Role for Endonuclease I in the Transmission Process of Colicin E<Subscript>2</Subscript>

The bactericide colicin E₂ is believed to act by binding to surface receptors and thereby initiating the movement of periplasmic endonuclease I to the membrane or cytoplasm, with subsequent DNA degradation. Escherichia coli cells are found to become resistant to colicin E₂ by losing their endonuclease I through mutation or osmotic shock treatment.     

How does lysozyme penetrate through the bacterial outer membrane?

Lysozyme fails to penetrate through the outer membrane of stationary phase cells of Escherichia coli when it is simply added to suspensions of plasmolyzed cells. Lysozyme penetrates the outer membrane only when these cells are exposed to a mild osmotic shock in the presence of EDTA and lysozyme.In the presence of Mg²⁺, the outer membrane is stabilized sufficiently so that there is no lysozyme penetration during osmotic shock. If Mg²⁺ is added after an osmotic shock has been used to cause lysozyme to penetrate a destabilized outer membrane, the outer membrane is stabilized once again. In this case however, cells are converted to spheroplasts by the lysozyme which has gained access to the murein layer prior to the addition of Mg²⁺. Mg²⁺ stabilizes the outer membranes of these spheroplasts sufficiently so that they remain immune to lysis even in the absence of osmotic stabilizers such as sucrose.These results are discussed in terms of current information on the structure of the murein layer and the outer membrane.     

Genes affecting coliphage BF23 and E colicin sensitivity in Salmonella typhimurium.

Rough strains of Salmonella typhimurium were sensitive to coliphage BF23. Spontaneous mutants resistant to BF23 (bfe) were isolated, and the trait was mapped using phage P1. The bfe gene in S. typhimurium was located between argF (66% co-transducible) and rif (61% co-transducible). The BF23-sensitive S. typhimurium strains were not sensitive to the E colicins. Cells of these rough strains absorbed colicin, as measured by loss of E2 or E3 killing units from colicin solutions and by specific adsorption of 125I-colicin E2 to bfe+ cells. Sensitivity to colicins E1, E2, and E3 was observed in a S. typhimurium strain carrying the F'8 gal+ episome. This episome complemented the tolB mutation of Escherichia coli. We conclude that the bfe+ protein satisfies requirements for adsorption of both phage BF23 and the E colicins. In addition, expression of a gene from E. coli, possibly tolB, is necessary for efficient E colicin killing of S. typhimurium.     

Defeat of colicin tolerance in Escherichia coli ompA mutants: evidence for interaction between colicin L-JF246 and the cytoplasmic membrane.

Escherichia coli ompA mutants are tolerant to colicin L-JF246. This tolerance can be overcome by a variety of treatments that have as their target the outer membrane or the peptidoglycan layers of the cell envelope. Thus, increasing the concentration of colicin L, releasing lipopolysaccharide from the outer membrane by treatment of intact cells with ethylenediaminetetracetic acid (EDTA), converting cells to spheroplasts by treatment with lysozyme-EDTA or penicillin, or trypsin, treatment of intact cells will result in an increased colicin sensitivity. These treatments alter the outer membrane of ompA mutants and suggest that the altered outer membrane may allow the penetration of at least a portion of the colicin L molecule to a site of action located within this barrier. To substantiate this, we have demonstrated that membrane vesicles prepared from ompA mutants are sensitive to colicin L and that 14C-labeled colicin L binds rapidly to both the outer and inner membrane fractions of the cell.     

Plasmolysis and Cell Shape Depend on Solute Outer-Membrane Permeability during Hyperosmotic Shock in E. coli

The concentration of chemicals inside the bacterial cytoplasm generates an osmotic pressure, termed turgor, which inflates the cell and is necessary for cell growth and survival. In Escherichia coli, a sudden increase in external concentration causes a pressure drop across the cell envelope that drives changes in cell shape, such as plasmolysis, where the inner and outer membranes separate. Here, we use fluorescence imaging of single cells during hyperosmotic shock with a time resolution on the order of seconds to examine the response of cells to a range of different conditions. We show that shock using an outer-membrane impermeable solute results in total cell volume reduction with no plasmolysis, whereas a shock caused by outer-membrane permeable ions causes plasmolysis immediately upon shock. Slowly permeable solutes, such as sucrose, which cross the membrane in minutes, cause plasmolysis to occur gradually as the chemical potential equilibrates. In addition, we quantify the detailed morphological changes to cell shape during osmotic shock. Nonplasmolyzed cells shrink in length with an additional lateral size reduction as the magnitude of the shock increases. Quickly plasmolyzing cells shrink largely at the poles, whereas gradually plasmolyzing cells invaginate along the cell cylinder. Our results give a comprehensive picture of the initial response of E. coli to hyperosmotic shock and offer explanations for seemingly opposing results that have been reported previously.     

Assembly of colicin A in the outer membrane of producing Escherichia coli cells requires both phospholipase A and one porin,but phospholipase A is sufficient for secretion

Three oligomeric forms of colicin A with apparent molecular masses of about 95 to 98 kDa were detected on sodium dodecyl sulfate (SDS)-polyacrylamide gels loaded with unheated samples from colicin A-producing cells of Escherichia coli. These heat-labile forms, called colicins Au, were visualized both on immunoblots probed with monoclonal antibodies against colicin A and by radiolabeling. Cell fractionation studies show that these forms of colicin A were localized in the outer membrane whether or not the producing cells contained the cal gene, which encodes the colicin A lysis protein responsible for colicin A release in the medium. Pulse-chase experiments indicated that their assembly into the outer membrane, as measured by their heat modifiable migration in SDS gels, was an efficient process. Colicins Au were produced in various null mutant strains, each devoid of one major outer membrane protein, except in a mutant devoid of both OmpC and OmpF porins. In cells devoid of outer membrane phospholipase A (OMPLA), colicin A was not expressed. Colicins Au were detected on immunoblots of induced cells probed with either polyclonal antibodies to OmpF or monoclonal antibodies to OMPLA, indicating that they were associated with both OmpF and OMPLA. Similar heat-labile forms were obtained with various colicin A derivatives, demonstrating that the C-terminal domain of colicin A, but not the hydrophobic hairpin present in this domain, was involved in their formation.     

Changes in E. coli cell envelope structure caused by uncouplers of active transport and colicin E1

It is of interest to inquire whether agents that uncouple or deenergize membranes cause concomitant structural changes. The agents considered here are the uncoupler carbonyl cyanide-p-trifluoromethoxyphenylhydrazone and the bacteriocidal protein colicin E1, agents for which there is some precedent for believing that they interact with membranes. In intact E. coli ML 308-225 cells the inhibition of [¹⁴C]-proline active transport by FCCP increases with uncoupler concentration from ～ 20% at 2 μM to ～100% at 5 μM. The increase in the rotational relaxation time (ρ) of the cell-bound fluorescent probe N-phenyl-1-naphthylamine (PhNap)

1 Abbreviations: FCCP – carbonyl cyanide p-trifluoromethoxyphenylhydrazone; ANS – 8-anilino-1-naphthalenesulfonate; PhNap, N-phenyl-1-naphthylamine; EDTA – ethylenediaminetetraacetate.

and 8-anilino-1-naphthalene-sulfonate (ANS) under these conditions shows the same dependence on FCCP concentration. For cells treated with EDTA to remove part of the outer lipopolysaccharide layer, inhibition of proline transport and the increase in ρ value of ANS show the same dependence on FCCP concentration with saturation at 0.3 μM. EDTA treatment causes a large increase in the binding and rotational relaxation time of PhNap, the latter quantity approaching a value obtained with purified inner membrane. Similar effects are produced in untreated cells by 5 μM FCCP. It is concluded that (a) EDTA treatment removes a permeability barrier t o FCCP and PhNap in the outer membrane; (b) uncoupling by FCCP removes a similar permeability barrier to PhNap; (c) binding of amphiphilic ANS, assumed to be located in the outer membrane, is hardly changed by these treatments; (d) deenergization of the inner membrane by FCCP thus causes a structural change in the outer membrane as measured by the permeability change to hydrophobic PhNap and the increase in ρ values of the amphiphilic ANS; (e) The binding sites reached by PhNap within the permeability barrier at or near the inner membrane are changed by FCCP from their initial state. This is inferred from an increase in PhNap quantum yield extrapolated to infinite cell concentration, and from removal by FCCP of an apparent phase transition sensed by the PhNap rotational relaxation time. Thus, uncoupling and deenergization by FCCP appears to cause structural change both in the outer membrane and inside the permeability barrier of the outer membrane. Transmission of the colicin E1 response in the envelope of intact and EDTA-treated cells can also be monitored by an increase in ANS and PhNap fluorescence intensity, a smaller fractional increase in dye binding, and a large increase in probe rotational relaxation time. The fluorescence changes of ANS again imply structural effects in the outer membrane caused by colicin. The binding and fluorescence changes of PhNap caused by colicin E1 acting on intact cells again imply an effect of deenergization on the permeability barrier of the outer membrane. Fluorescence changes with PhNap in intact and EDTA-treated cells show that the dye binding sites are altered in the presence of colicin E1. It is also shown that the PhNap intensity change can be blocked by low concentrations of vitamin B12, which competes for the colicin E1 receptor. Some properties are presented of the probe chlorotetracycline, which has been proposed by others to be an indicator of magnesium. The probe appears to reside in an environment somewhat similar to that of ANS, but the colicin-induced changes in its fluorescence parameters appear to be small under our conditions.     

Transmembrane Protein (Perfringolysin O) Association with Ordered Membrane Domains (Rafts) Depends Upon the Raft-Associating Properties of Protein-Bound Sterol

The concentration of chemicals inside the bacterial cytoplasm generates an osmotic pressure, termed turgor, which inflates the cell and is necessary for cell growth and survival. In Escherichia coli, a sudden increase in external concentration causes a pressure drop across the cell envelope that drives changes in cell shape, such as plasmolysis, where the inner and outer membranes separate. Here, we use fluorescence imaging of single cells during hyperosmotic shock with a time resolution on the order of seconds to examine the response of cells to a range of different conditions. We show that shock using an outer-membrane impermeable solute results in total cell volume reduction with no plasmolysis, whereas a shock caused by outer-membrane permeable ions causes plasmolysis immediately upon shock. Slowly permeable solutes, such as sucrose, which cross the membrane in minutes, cause plasmolysis to occur gradually as the chemical potential equilibrates. In addition, we quantify the detailed morphological changes to cell shape during osmotic shock. Nonplasmolyzed cells shrink in length with an additional lateral size reduction as the magnitude of the shock increases. Quickly plasmolyzing cells shrink largely at the poles, whereas gradually plasmolyzing cells invaginate along the cell cylinder. Our results give a comprehensive picture of the initial response of E. coli to hyperosmotic shock and offer explanations for seemingly opposing results that have been reported previously.     

Porin activity in the osmotic shock fluid of Escherichia coli.

Osmotic shock fluid of Escherichia coli exhibited pore-forming activity. This activity could be followed by an in vitro assay based on the conductivity increase for ions due to the presence of pores in black lipid membranes. The histogram (the distribution of conductivity increments in a single pore experiment) obtained with osmotic shock fluid from E. coli was identical to the histogram obtained by detergent-solubilized porin isolated from the outer membrane. The osmotic shock fluid from porin-negative mutants also exhibited pore activity, although the histogram and ion specificity were different from those of porin. Antibodies raised against detergent-solubilized porin were able to form precipitin lines by the Ouchterlony immunodiffusion technique when shock fluids, but not detergent-solubilized porin, were used. These antibodies prevented the formation of pores when shock fluids contained porin but not when shock fluids obtained from porin-negative mutants were used. Macroscopic membrane conductivity of shock fluids due to porin exhibited a concentration dependence, in contrast to detergent-solubilized porin. These results indicate that the hydrodynamic properties of periplasmic or "soluble" porin are different from those of the detergent-solubilized porin of the outer membrane. Periplasmic porin comprises about 0.7% of total protein in the osmotic shock fluid.     

Membrane fluidity of halophilic ectoine-secreting bacteria related to osmotic and thermal treatment

In response to sudden decrease in osmotic pressure, halophilic microorganisms secrete their accumulated osmolytes. This specific stress response, combined with physiochemical responses to the altered environment, influence the membrane properties and integrity of cells, with consequent effects on growth and yields in bioprocesses, such as bacterial milking. The aim of this study was to investigate changes in membrane fluidity and integrity induced by environmental stress in ectoine-secreting organisms. The halophilic ectoine-producing strains Alkalibacillus haloalkaliphilus and Chromohalobacter salexigens were treated hypo- and hyper-osmotically at several temperatures. The steady-state anisotropy of fluorescently labeled cells was measured, and membrane integrity assessed by flow cytometry and ectoine distribution. Strong osmotic downshocks slightly increased the fluidity of the bacterial membranes. As the temperature increased, the increasing membrane fluidity encouraged more ectoine release under the same osmotic shock conditions. On the other hand, combined shock treatments increased the number of disintegrated cells. From the ectoine release and membrane integrity measurements under coupled thermal and osmotic shock conditions, we could optimize the secretion conditions for both bacteria.