Attenuating l-lysine production by deletion of ddh and lysE and their effect on l-threonine and l-isoleucine production in Corynebacterium glutamicum

The fermentative production of l-threonine and l-isoleucine with Corynebacterium glutamicum is usually accompanied by the by-production of l-lysine, which shares partial biosynthesis pathway with l-threonine and l-isoleucine. Since the direct precursor for l-lysine synthesis, diaminopimelate, is a component of peptidoglycan and thus essential for cell wall synthesis, reducing l-lysine by-production could be troublesome. Here, a basal strain with eliminated l-lysine production was constructed from the wild type C. glutamicum ATCC13869 by deleting the chromosomal ddh and lysE. Furthermore, the basal strain as well as the ddh single mutant strain was engineered for l-threonine production by over-expressing lysC1, hom1 and thrB, and for l-isoleucine production by over-expressing lysC1, hom1, thrB and ilvA1. Fermentation experiments with the engineered strains showed that (i) deletion of ddh improved l-threonine production by 17%, and additional deletion of lysE further improved l-threonine production by 28%; (ii) deletion of ddh improved l-isoleucine production by 8% and improved cell growth by 21%, whereas additional deletion of lysE had no further influence on both l-isoleucine production and cell growth; (iii) l-lysine by-production was reduced by 95% and 86% in l-threonine and l-isoleucine production, respectively, by deletion of ddh and lysE. This is the first report on improving l-threonine and l-isoleucine production by deleting ddh and lysE in C. glutamicum. The results demonstrate deletion of ddh and lysE as an effective strategy to reduce l-lysine by-production without surrendering the cell growth of C. glutamicum.     

Efficient extracellular production of type I secretion pathway-dependent Pseudomonas fluorescens lipase in recombinant Escherichia coli by heterologous ABC protein exporters

Heterologous ABC protein exporters, the apparatus of type I secretion pathway in Gram-negative bacteria, were used for extracellular production of Pseudomonas fluorescens lipase (TliA) in recombinant Escherichia coli. The effect of the expression of different ABC protein exporter gene clusters (P. fluorescens tliDEF, Pseudomonas aeruginosa aprDEF, Erwinia chrysanthemi prtDEF, and Serratia marcescens lipBCD genes) was examined on the secretion of TliA at growth temperatures of 20, 25, 30 and 35 °C. TliA secretion in recombinant E. coli XL10-Gold varied depending upon type of ABC protein exporter and culture temperature. E. coli expressing S. marcescens lipBCD genes showed the highest secretion level of TliA (122.8 U ml^?1) when cultured at 25 °C. Thus, optimized culture conditions for efficient extracellular production of lipase in recombinant E. coli can be designed by changing the type of ABC protein exporter and the growth temperature.     

Biochemical and biophysical characterization of Leishmania donovani gamma-glutamylcysteine synthetase

γ-glutamylcysteine synthetase (Gcs) is a vital enzyme catalyzing the first and rate limiting step in the trypanothione biosynthesis pathway, the ATP-dependent ligation of L-Glutamate and L-Cysteine to form gamma-glutamylcysteine. The Trypanothione biosynthesis pathway is unique metabolic pathway essential for trypanosomatid survival rendering Gcs as a potential drug target. Here we report the cloning, expression, purification and characterization of L. donovani Gcs. Three other constructs of Gcs (GcsN, GcsC and GcsT) were designed on the basis of S. cerevisiae and E. coli Gcs crystal structures. The study shows Gcs possesses ATPase activity even in the absence of substrates L-glutamate and L-Cysteine. Divalent ions however plays an indispensable role in LdGcs ATPase activity. Isothermal titration calorimetry and fluorescence studies illustrates that L. donovani Gcs binds substrate in order ATP >L-glutamate>L-cysteine with Glu 92 and Arg 498 involved in ATP hydrolysis and Glu 92, Glu 55 and Arg 498 involved in glutamate binding. Homology modeling and molecular dynamic simulation studies provided the structural rationale of LdGcs catalytic activity and emphasized on the possibility of involvement of three Mg²⁺ ions along with Glutamates 52, 55, 92, 99, Met 322, Gln 328, Tyr 397, Lys 483, Arg 494 and Arg 498 in the catalytic function of L. donovani Gcs.     

Inhibition of <Emphasis Type="Italic">Escherichia coli</Emphasis> inorganic pyrophosphatase by fructose-1-phosphate

Pyrophosphate regulates vital cellular reactions, and its level in E. coli cells is under the ultimate control of inorganic pyrophosphatase. The mechanisms involved in the regulation of pyrophosphatase activity still need to be elucidated. The present study demonstrated that fructose-1-phosphate inhibits pyrophosphatase activity by a mechanism not involving competition with substrate for binding to the active site. The inhibition constant governing the binding of the inhibitor to the enzyme–substrate complex is 1.1 mM. Substitutions of Lys112, Lys115, Lys148, and Arg43 in the regulatory site completely or partially abolished the inhibition. Thus, Fru-1-P is a physiological inhibitor of pyrophosphatase that acts via a regulatory site in this enzyme.     

Metabolic engineering of Corynebacterium glutamicum to produce GDP-l-fucose from glucose and mannose

Wild-type Corynebacterium glutamicum was metabolically engineered to convert glucose and mannose into guanosine 5′-diphosphate (GDP)-l-fucose, a precursor of fucosyl-oligosaccharides, which are involved in various biological and pathological functions. This was done by introducing the gmd and wcaG genes of Escherichia coli encoding GDP-d-mannose-4,6-dehydratase and GDP-4-keto-6-deoxy-d-mannose-3,5-epimerase-4-reductase, respectively, which are known as key enzymes in the production of GDP-l-fucose from GDP-d-mannose. Coexpression of the genes allowed the recombinant C. glutamicum cells to produce GDP-l-fucose in a minimal medium containing glucose and mannose as carbon sources. The specific product formation rate was much higher during growth on mannose than on glucose. In addition, the specific product formation rate was further increased by coexpressing the endogenous phosphomanno-mutase gene (manB) and GTP-mannose-1-phosphate guanylyl-transferase gene (manC), which are involved in the conversion of mannose-6-phosphate into GDP-d-mannose. However, the overexpression of manA encoding mannose-6-phosphate isomerase, catalyzing interconversion of mannose-6-phosphate and fructose-6-phosphate showed a negative effect on formation of the target product. Overall, coexpression of gmd, wcaG, manB and manC in C. glutamicum enabled production of GDP-l-fucose at the specific rate of 0.11 mg g cell^?1 h^?1. The specific GDP-l-fucose content reached 5.5 mg g cell^?1, which is a 2.4-fold higher than that of the recombinant E. coli overexpressing gmd, wcaG, manB and manC under comparable conditions. Well-established metabolic engineering tools may permit optimization of the carbon and cofactor metabolisms of C. glutamicum to further improve their production capacity.     

A CRISPR/dCas9-assisted system to clone toxic genes in Escherichia coli

BackgroundThe cloning of toxic genes in E. coli requires strict regulation of the target genes' leaky expression. Many methods facilitating successful gene cloning of toxic genes are commonly exploited, but the applicability is severely limited.MethodsA CRISPR/dCas9-assisted system was used to clone toxic genes in E. coli. The plasmid-based and genome-integrated systems were designed in this study. And the green fluorescent protein characterization system was used to test the repression efficiency of the two systems.ResultsWe optimized the plasmid-based CRISPR/dCas9-assisted repression system via testing different sgRNAs targeting the Ptrc promoter and achieved inhibition efficiency up to 64.8%. The genome-integrated system represented 35.9% decreased GFP expression and was successfully employed to cloned four toxic genes from Corynebacterium glutamicum in E. coli.ConclusionsUsing this method, we successfully cloned four C. glutamicum-derived toxic genes that had been failed to clone in conventional ways. The CRISPR/dCas9-assisted gene cloning method was a promising tool to facilitate precise gene cloning of different origins in E. coli.General significanceThis system will be useful for cloning toxic genes from different origins in E. coli, and can accelerate the related research of gene characterization and heterologous expression in the metagenomic era.     

Synthetic biology platform of CoryneBrick vectors for gene expression in Corynebacterium glutamicum and its application to xylose utilization

Currently, the majority of tools in synthetic biology have been designed and constructed for model organisms such as Escherichia coli and Saccharomyces cerevisiae. In order to broaden the spectrum of organisms accessible to such tools, we established a synthetic biological platform, called CoryneBrick, for gene expression in Corynebacterium glutamicum as a set of E. coli-C. glutamicum shuttle vectors whose elements are interchangeable with BglBrick standard parts. C. glutamicum is an established industrial microorganism for the production of amino acids, proteins, and commercially promising chemicals. Using the CoryneBrick vectors, we showed various time-dependent expression profiles of a red fluorescent protein. This CoryneBrick platform was also applicable for two-plasmid expression systems with a conventional C. glutamicum expression vector. In order to demonstrate the practical application of the CoryneBrick vectors, we successfully reconstructed the xylose utilization pathway in the xylose-negative C. glutamicum wild type by fast BglBrick cloning methods using multiple genes encoding for xylose isomerase and xylulose kinase, resulting in a growth rate of 0.11?±?0.004 h^?1 and a xylose uptake rate of 3.35 mmol/gDW/h when 1 % xylose was used as sole carbon source. Thus, CoryneBrick vectors were shown to be useful engineering tools in order to exploit Corynebacterium as a synthetic platform for the production of chemicals by controllable expression of the genes of interest.     

Recycling of ribosomal complexes stalled at the step of elongation in Escherichia coli

Translating ribosomes often stall during elongation. The stalled ribosomes are known to be recycled by tmRNA (SsrA)-mediated trans-translation. Another process that recycles the stalled ribosomes is characterized by peptidyl-tRNA release. However, the mechanism of peptidyl-tRNA release from the stalled ribosomes is not well understood. We used a defined system of an AGA-minigene containing a small open reading frame (ATG AGA AGA). Translation of the AGA-minigene mRNA is toxic to Escherichia coli because it stalls ribosomes during elongation and sequesters tRNA^Arg4 as a short-chain peptidyl-tRNA^Arg4 in the ribosomal P-site. We show that a ribosome recycling factor (RRF)-mediated process rescues the host from the AGA-minigene toxicity by releasing the peptidyl-tRNA^Arg4 from the ribosomes. The growth phenotypes of E. coli strains harboring mutant alleles of RRF and initiation factor 3 (IF3) genes and their consequences on λimmP22 phage replication upon AGA-minigene expression reveal that IF3 facilitates the RRF-mediated processing of the stalled ribosomes. Additionally, we have designed a uracil DNA glycosylase gene construct, ung-stopless, whose expression is toxic to E. coli. We show that the RRF-mediated process also alleviates the ung-stopless construct-mediated toxicity to the host by releasing the ung mRNA from the ribosomes harboring long-chain peptidyl-tRNAs.     

ATP as effector of inorganic pyrophosphatase of <Emphasis Type="Italic">Escherichia coli</Emphasis>. The role of residue Lys112 in binding effectors

It has been shown that PP_i, methylenediphosphonate, and ATP act as effectors of Escherichia coli inorganic pyrophosphatase (E-PPase), and that they compete for binding at the allosteric regulatory site. On the basis of chemical modification and computer modeling of a structure of the enzyme-ATP complex, a number of amino acid residues presumably involved in binding effectors has been revealed. Mutant variants Lys112Gln, Lys112Gln/Lys148Gln, and Lys112Gln/Lys115Ala of E-PPase have been obtained, as well as a modified variant of wild type E-PPase (^Adwt PPase) with a derivative of ATP chemically attached to the amino group of Lys146. Kinetic properties of these variants have been investigated and compared to the earlier described variants Lys115Ala, Arg43Gln, and Lys148Gln. Analysis of the data confirms the proposed location of an effector binding site in a cluster of positively charged amino acid residues including the side chains of Arg43, Lys146 (subunit A), Lys112, and Lys115 (subunit B). Lys112 is supposed to play a key role in forming contacts with the phosphate groups of the three studied effectors. Published in Russian in Biokhimiya, 2007, Vol. 72, No. 1, pp. 118–127.     

Improving the secretion of cadaverine in Corynebacterium glutamicum by cadaverine–lysine antiporter

Cadaverine (1,5-pentanediamine, diaminopentane), the desired raw material of bio-polyamides, is an important industrial chemical with a wide range of applications. Biosynthesis of cadaverine in Corynebacterium glutamicum has been a competitive way in place of petroleum-based chemical synthesis method. To date, the cadaverine exporter has not been found in C. glutamicum. In order to improve cadaverine secretion, the cadaverine–lysine antiporter CadB from Escherichia coli was studied in C. glutamicum. Fusion expression of cadB and green fluorescent protein (GFP) gene confirmed that CadB could express in the cell membrane of C. glutamicum. Co-expression of cadB and ldc from Hafnia alvei in C. glutamicum showed that the cadaverine secretion rate increased by 22 % and the yield of total cadaverine and extracellular cadaverine increased by 30 and 73 %, respectively. Moreover, the recombinant strain cultured at acid and neutral pH separately hardly had any difference in cadaverine concentrations. These results suggested that CadB could be expressed in the cell membrane of C. glutamicum and that recombinant CadB could improve cadaverine secretion and the yield of cadaverine. Moreover, the pH value did not affect the function of recombinant CadB. These results may be a promising metabolic engineering strategy for improving the yield of the desired product by enhancing its export out of the cell.     

Gene cloning,expression and characterization of a new cold-active and salt-tolerant endo-β-1,4-xylanase from marine <Emphasis Type="Italic">Glaciecola mesophila</Emphasis> KMM 241

A new plasmid pCASE1 was isolated from Gram-positive Corynebacterium casei JCM 12072. It comprised a 2.4-kb nucleotide sequence with three ORFs, two of which were indispensable for autonomous replication in Corynebacterium glutamicum. Homology search identified these two ORFs as repA and repB, areas coding proteins involved in plasmid replication. repA sequence showed high similarity to theta-replicating Escherichia coli ColE2-P9 plasmids and even higher similarity to plasmids derived from Gram-positive bacteria belonging to a subfamily of this ColE2-P9 group. An E. coli–C. glutamicum shuttle vector was constructed with pCASE1 fragment including repA and repB to transform C. glutamicum and showed compatibility with corynebacterial plasmids from different plasmid families. The copy number of the shuttle vector in C. glutamicum was 13 and the vector showed stability for 102 generations with no selective pressure.     

Production of <Emphasis Type="SmallCaps">d</Emphasis>-lactic acid by <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> under oxygen deprivation

In mineral salts medium under oxygen deprivation, Corynebacterium glutamicum exhibits high productivity of l-lactic acid accompanied with succinic and acetic acids. In taking advantage of this elevated productivity, C. glutamicum was genetically modified to produce d-lactic acid. The modification involved expression of fermentative d-lactate dehydrogenase (d-LDH)-encoding genes from Escherichia coli and Lactobacillus delbrueckii in l-lactate dehydrogenase (l-LDH)-encoding ldhA-null C. glutamicum mutants to yield strains C. glutamicum ΔldhA/pCRB201 and C. glutamicum ΔldhA/pCRB204, respectively. The productivity of C. glutamicum ΔldhA/pCRB204 was fivefold higher than that of C. glutamicum ΔldhA/pCRB201. By using C. glutamicum ΔldhA/pCRB204 cells packed to a high density in mineral salts medium, up to 1,336 mM (120 g l⁻¹) of d-lactic acid of greater than 99.9% optical purity was produced within 30 h.     

Involvement of Val 315 located in the C-terminal region of thermolysin in its expression in Escherichia coli and its thermal stability

Thermolysin is a thermophilic and halophilic zinc metalloproteinase that consists of β-rich N-terminal (residues 1–157) and α-rich C-terminal (residues 158–316) domains. Expression of thermolysin variants truncated from the C-terminus was examined in E. coli culture. The C-terminal Lys316 residue was not significant in the expression, but Val315 was critical. Variants in which Val315 was substituted with fourteen amino acids were prepared. The variants substituted with hydrophobic amino acids such as Leu and Ile were almost the same as wild-type thermolysin (WT) in the expression amount, α-helix content, and stability. Variants with charged (Asp, Glu, Lys, and Arg), bulky (Trp), or small (Gly) amino acids were lower in these characteristics than WT. All variants exhibited considerably high activities (50–100% of WT) in hydrolyzing protein and peptide substrates. The expression amount, helix content, and stability of variants showed good correlation with hydropathy indexes of the amino acids substituted for Val315. Crystallographic study of thermolysin has indicated that V315 is a member of the C-terminal hydrophobic cluster. The results obtained in the present study indicate that stabilization of the cluster increases thermolysin stability and that the variants with higher stability are expressed more in the culture. Although thermolysin activity was not severely affected by the variation at position 315, the stability and specificity were modified significantly, suggesting the long-range interaction between the C-terminal region and active site.     

Functional expression of the genes of Escherichia coli in gram-positive Corynebacterium glutamicum

Summary Hybrid plasmids were constructed by combining in vitro the Escherichia coli plasmid pGA22, which carries the genes determining resistance to kanamycin, tetracycline, chloramphenicol and ampicillin, with the cryptic plasmids, pCG1 and pCG2, of Corynebacterium glutamicum. The hybrid plasmids were introduced into C. glutamicum and E. coli and replicated in both hosts. They expressed all the E. coli resistance phenotypes except ampicillin resistance in C. glutamicum. The levels of antibiotic inactivating enzymes encoded on these plasmids were about four to ten times lower in C. glutamicum than in E. coli. Despite the lack of expression of ampicillin resistance, -lactamase activity was detected in C. glutamicum carrying hybrid plasmids.     

Enhanced production of l-phenylalanine in Corynebacterium glutamicum due to the introduction of Escherichia coli wild-type gene aroH

Metabolic engineering is a powerful tool which has been widely used for producing valuable products. For improving l-phenylalanine (l-Phe) accumulation in Corynebacterium glutamicum, we have investigated the target genes involved in the biosynthetic pathways. The genes involved in the biosynthesis of l-Phe were found to be strictly regulated genes by feedback inhibition. As a result, overexpression of the native wild-type genes aroF, aroG or pheA resulted in a slight increase of l-Phe. In contrast, overexpression of aroF ^wt or pheA ^fbr from E. coli significantly increased l-Phe production. Co-overexpression of aroF ^wt and pheA ^fbr improved the titer of l-Phe to 4.46 ± 0.06 g l^?1. To further analyze the target enzymes in the aromatic amino acid synthesis pathway between C. glutamicum and E. coli, the wild-type gene aroH from E. coli was overexpressed and evaluated in C. glutamicum. As predicted, upregulation of the wild-type gene aroH resulted in a remarkable increase of l-Phe production. Co-overexpression of the mutated pheA ^fbr and the wild-type gene aroH resulted in the production of l-Phe up to 4.64 ± 0.09 g l^?1. Based on these results we conclude that the wild-type gene aroH from E. coli is an appropriate target gene for pathway engineering in C. glutamicum for the production of aromatic amino acids.     

A chromosomally encoded T7 RNA polymerase-dependent gene expression system for Corynebacterium glutamicum: construction and comparative evaluation at the single-cell level

Corynebacterium glutamicum has become a favourite model organism in white biotechnology. Nevertheless, only few systems for the regulatable (over)expression of homologous and heterologous genes are currently available, all of which are based on the endogenous RNA polymerase. In this study, we developed an isopropyl-β-d-1-thiogalactopyranosid (IPTG)-inducible T7 expression system in the prophage-free strain C. glutamicum MB001. For this purpose, part of the DE3 region of Escherichia coli BL21(DE3) including the T7 RNA polymerase gene 1 under control of the lacUV5 promoter was integrated into the chromosome, resulting in strain MB001(DE3). Furthermore, the expression vector pMKEx2 was constructed allowing cloning of target genes under the control of the T7lac promoter. The properties of the system were evaluated using eyfp as heterologous target gene. Without induction, the system was tightly repressed, resulting in a very low specific eYFP fluorescence (= fluorescence per cell density). After maximal induction with IPTG, the specific fluorescence increased 450-fold compared with the uninduced state and was about 3.5 times higher than in control strains expressing eyfp under control of the IPTG-induced tac promoter with the endogenous RNA polymerase. Flow cytometry revealed that T7-based eyfp expression resulted in a highly uniform population, with 99% of all cells showing high fluorescence. Besides eyfp, the functionality of the corynebacterial T7 expression system was also successfully demonstrated by overexpression of the C. glutamicum pyk gene for pyruvate kinase, which led to an increase of the specific activity from 2.6 to 135 U mg⁻¹. It thus presents an efficient new tool for protein overproduction, metabolic engineering and synthetic biology approaches with C. glutamicum.     

Engineering of a Glycerol Utilization Pathway for Amino Acid Production by Corynebacterium glutamicum

The amino acid-producing organism Corynebacterium glutamicum cannot utilize glycerol, a stoichiometric by-product of biodiesel production. By heterologous expression of Escherichia coli glycerol utilization genes, C. glutamicum was engineered to grow on glycerol. While expression of the E. coli genes for glycerol kinase (glpK) and glycerol 3-phosphate dehydrogenase (glpD) was sufficient for growth on glycerol as the sole carbon and energy source, additional expression of the aquaglyceroporin gene glpF from E. coli increased growth rate and biomass formation. Glutamate production from glycerol was enabled by plasmid-borne expression of E. coli glpF, glpK, and glpD in C. glutamicum wild type. In addition, a lysine-producing C. glutamicum strain expressing E. coli glpF, glpK, and glpD was able to produce lysine from glycerol as the sole carbon substrate as well as from glycerol-glucose mixtures.     

Utilization of Escherichia coli Outer-Membrane Endoprotease OmpT Variants as Processing Enzymes for Production of Peptides from Designer Fusion Proteins

Escherichia coli outer-membrane endoprotease OmpT has suitable properties for processing fusion proteins to produce peptides and proteins. However, utilization of this protease for such production has been restricted due to its generally low cleavage efficiency at Arg (or Lys)-Xaa, where Xaa is a nonbasic N-terminal amino acid of a target polypeptide. The objective of this study was to generate a specific and efficient OmpT protease and to utilize it as a processing enzyme for producing various peptides and proteins by converting its substrate specificity. Since OmpT Asp⁹⁷ is proposed to interact with the P1′ amino acid of its substrates, OmpT variants with variations at Asp⁹⁷ were constructed by replacing this amino acid with 19 natural amino acids to alter the cleavage specificity at Arg (P1)-Xaa (P1′). The variant OmpT that had a methionine at this position, but not the wild-type OmpT, efficiently cleaved a fusion protein containing the amino acid sequence -Arg-Arg-Arg-Ala-Arg↓motilin, in which motilin is a model peptide with a phenylalanine at the N terminus. The OmpT variants with leucine and histidine at position 97 were useful in releasing human adrenocorticotropic hormone (1-24) (serine at the N terminus) and human calcitonin precursor (cysteine at the N terminus), respectively, from fusion proteins. Motilin was produced by this method and was purified up to 99.0% by two chromatographic steps; the yield was 160 mg/liter of culture. Our novel method in which the OmpT variants are used could be employed for production of various peptides and proteins.