Designing of MIP based QCM sensor having thymine recognition sites based on biomimicking DNA approach

Quartz crystal microbalance (QCM) sensors coated with molecular imprinted polymers (MIP) have been developed for the determination of thymine. In this method, methacryloylamidoadenine (MA-Ade) have used as a new monomer and thymine template for inspiration of DNA nucleobases interaction. The thymine can be simultaneously hydrogen binding to MA-Ade and fit into the shape-selective cavities. Thus, the interaction between nucleobases has an effect on the binding ability of the QCM sensors. The binding affinity of the thymine imprinted sensors has investigated by using the Langmuir isotherm. The thymine imprinted QCM electrodes have shown homogeneous binding sites for thymine (K_a: 1.0 × 10⁵ M⁻¹) while heterogeneous binding sites for uracil. On the other hand, recognition selectivity of the QCM sensor based on thymine imprinted polymer toward to uracil, ssDNA and ssRNA has been reported in this work.     

Preparation and characterization of a novel pH-sensitive chitosan-g-poly (acrylic acid)/attapulgite/sodium alginate composite hydrogel bead for controlled release of diclofenac sodium

A series of pH-sensitive composite hydrogel beads composed of chitosan-g-poly (acrylic acid)/attapulgite/sodium alginate (CTS-g-PAA/APT/SA) was prepared as drug delivery matrices crosslinked by Ca²⁺ owing to the ionic gelation of SA. The structure and surface morphology of the composite hydrogel beads were characterized by FTIR and SEM, respectively. pH-sensitivity of these composite hydrogels beads and the release behaviors of drug from them were investigated. The results showed that the composite hydrogel beads had good pH-sensitivity. The cumulative release ratios of diclofenac sodium (DS) from the composite hydrogel beads were 3.76% in pH 2.1 solution and 100% in pH 6.8 solutions within 24 h, respectively. However, the cumulative release ratio of DS in pH 7.4 solution reached 100% within 2 h. The DS cumulative release ratio reduced with increasing APT content from 0 to 50 wt%. The drug release was swelling-controlled at pH 6.8.     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Microalgae fiber optic biosensors for herbicide monitoring using sol–gel technology

Three microalgal species (Dictyosphaerium chlorelloides (D.c.), Scenedesmus intermedius (S.i.) and Scenedesmus sp. (S.s.)) were encapsulated in silicate sol–gel matrices and the increase in the amount of chlorophyll fluorescence signal was used to quantify simazine. Influence of several parameters on the preparation of the sensing layers has been evaluated: effect of pH on sol–gel gelation time; effect of algae density on sensor response; influence of glycerol (%) on the membrane stability. Long term stability was also tested and the fluorescence signal from biosensors remained stable for at least 3 weeks. D.c. biosensor presented the lowest detection limits for simazine (3.6 μg L⁻¹) and the broadest dynamic calibration range (19–860 μg L⁻¹) with IC₅₀ 125 ± 14 μg L⁻¹. Biosensor was validated by HPLC with UV/DAD detection. The biosensor showed response to those herbicides that inhibit the photosynthesis at photosystem II (triazines: simazine, atrazine, propazine, terbuthylazine; urea based herbicides: linuron). However, no significant increases of fluorescence response was obtained for similar concentrations of 2,4-D (hormonal herbicide) or Cu(II). The combined use of two biosensors that use two different genotypes, sensitive and resistant to simazine, jointly allowed improving microalgae biosensor specificity.     

High-performance liquid chromatographic method for determination of DDT and its degradation products in rat plasma, liver and brain: validation and application to a pharmacokinetic study

A sensitive and reliable high-performance liquid chromatographic (HPLC) method, using a solid-phase extraction (SPE), was established and validated for determination of p,p′-DDT [1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane] and its metabolite p,p′-DDE [1,1-(2,2-dichloroethanylidene)-bis(4-chlorobenzene)] in rat plasma, liver and brain. After being diluted with water, plasma, liver and brain samples were applied to a solid-phase extraction C₁₈ cartridge. The extraction containing p,p′-DDT and p,p′-DDE from the cartridge were cleaned-up using a Florisil Sep-Pak cartridge. The samples were analyzed by HPLC using UV detection at 238 nm. The limit of detection for p,p′-DDT and p,p′-DDE was 0.1 mg kg⁻¹ liver or brain and 0.1 mg l⁻¹ plasma. For six replicate samples at 40, 4 and 0.2 mg kg⁻¹, intra-day precision values were within 4.9% for plasma, 6.4% for liver, and 9.7% for brain. Inter-day precision values at 4 mg kg⁻¹ were within 8.2% for plasma and tissues. The method performances were shown to be selective for p,p′-DDT and p,p′-DDE, and linear over the range 0.04–12 mg kg⁻¹ (mg l⁻¹ for plasma). The absolute recoveries of p,p′-DDT and p,p′-DDE in rat plasma and tissues were over 92%. The method was proved to be applicable to the pharmacokinetic study of DDT in rats after a single oral administration.     

Annual cycle of CO2 exchange over a reed (Phragmites australis) wetland in Northeast China

Net ecosystem exchange of CO₂ (NEE) was measured during 2005 using the eddy covariance (EC) technique over a reed (Phragmites australis (Cav.) Trin. ex Steud.) wetland in Northeast China (121°54′E, 41°08′N). Diurnal NEE patterns varied markedly among months. Outside the growing season, NEE lacked a diurnal pattern and it fluctuated above zero with an average value of 0.07 mg CO₂ m⁻² s⁻¹ resulting from soil microbial activity. During the growing season, NEE showed a distinct V-like diel course, and the mean daily NEE was −7.48 ± 2.74 g CO₂ m⁻² day⁻¹, ranging from −13.58 g CO₂ m⁻² day⁻¹ (July) to −0.10 g CO₂ m⁻² day⁻¹ (October). An annual cycle was also apparent, with CO₂ uptake increasing rapidly in May, peaking in July, and decreasing from August. Monthly cumulative NEE ranged from −115 ± 24 g C m⁻² month⁻¹ (the reed wetland was a CO₂ sink) in July to 75 ± 16 g C m⁻² month⁻¹ (CO₂ source) in November. The annual CO₂ balance suggests a net uptake of −65 ± 14 g C m⁻² year⁻¹, mainly due to the gains in June and July. Cumulative CO₂ emission during the non-growing season was 327 g C m⁻², much greater than the absolute value of the annual CO₂ balance, which proves the importance of the wintertime CO₂ efflux at the study site. The ratio of ecosystem respiration (R_eco) to gross primary productivity (GPP) for this reed ecosystem was 0.95, indicating that 95% of plant assimilation was consumed by the reed plant or supported the activities of heterotrophs in the soil. Daytime NEE values during the growing season were closely related to photosynthetically active radiation (PAR) (r² > 0.63, p < 0.01). Both maximum ecosystem photosynthesis rate (A_max) and apparent quantum yield (α) were season-dependent, and reached their peak values in July (1.28 ± 0.11 mg CO₂ m⁻² s⁻¹, 0.098 ± 0.027 μmol CO₂ μmol⁻¹ photon, respectively), corresponding to the observed maximum NEE in July. Ecosystem respiration (R_eco) relied on temperature and soil water content, and the mean value of Q₁₀ was about 2.4 with monthly variation ranging from 1.8 to 4.1 during 2005. Annual methane emission from this reed ecosystem was estimated to be about 3 g C m⁻² year⁻¹, and about 5% of the net carbon fixed by the reed wetland was released to the atmosphere as CH₄.     

Kinetic analyses for bindings of concanavalin A to dispersed and condensed mannose surfaces on a quartz crystal microbalance

A biotinylated mannotriose (Man3-bio) was dispersively immobilized in the matrix of biotinylated lactose (Gal-Glc-bio) on a streptavidin-covered, 27-MHz quartz crystal microbalance (QCM), and binding kinetics of concanavalin A (Con A) to Man3-bio in the Gal-Glc-bio matrix could be obtained from frequency decreases (mass increases) of the QCM. Association constants (K_a) and binding and dissociation rate constants (k_on and k_off) could be determined separately as the 1:1 and 1:2 bindings of Con A to Man3-bio on the surface. When Man3-bio was immobilized with content of 1 to 5 mol% in the matrix, the 1:1 binding of Con A to Man3-bio was obtained as K_a = (4 ± 1) × 10⁶ M⁻¹, k_on = (4 ± 1) × 10⁴ M⁻¹ s⁻¹, and k_off = (12 ± 2) × 10^–3 s⁻¹. On the contrary, when Man3-bio was immobilized with content of 20 to 100 mol% in the matrix, the 1:2 binding of Con A to Man3-bio was obtained as K_a = (14 ± 2) × 10⁶ M⁻¹, k_on = (14 ± 2) × 10⁴ M⁻¹ s⁻¹, and k_off = (7 ± 2) × 10^–3 s⁻¹. Thus, K_a for the 1:2 binding was 10 times larger than that for the 1:1 binding, with a three times larger binding rate constant (k_on) and a three times smaller dissociation rate constant (k_off). This is the first example to obtain separate kinetic parameters for the 1:1 and 1:2 bindings of lectins to carbohydrates on the surface.     

Unusual rheological properties of a new associative polysaccharide in salt media

New amphiphilic polysaccharides based on alginate-grafted-Poly (ε-caprolactone) or alg-g-PCL bearing two kinds of PCL chains with different molar masses (1250 and 530 gmol⁻¹) with various amounts from 3% to 15% were prepared. Rheological properties in aqueous solutions of such systems have been investigated as a function of polymer concentration, added salt and temperature in semi-dilute regime. Strong hydrophobic intermolecular associations were clearly demonstrated in pure water whatever the PCL chain length and extend of modification. Increasing polymer concentration, grafting rate and/or PCL chains length can lead to a structured liquid behaviour. Rheological properties of the most organized system have been found independent to the temperature (until 60 °C). In salt media, a strong dependence of hydrophobic interactions to the length of PCL chains was observed. For M_PCL = 1250 g.mol⁻¹ the screening of charges promotes the establishment of intermolecular interactions and leads to a strong physical gel for the highest grafting rates. For M_PCL = 530 g mol⁻¹, ionic strength leads to a decrease of rheological properties when increasing grafting rate. This result may indicate an increase of hydrophobic clusters even in the entangled regime. This unusual behaviour opens the ways for the preparation of suitable hydrogels for drug release.     

Development of molecularly imprinted polymers for the binding of nitrofurantoin

Novel molecularly imprinted polymers (MIPs) for the recognition of nitrofurantoin (NFT) were prepared by photoinitiated polymerisation in polar solvent using 2,6-bis(methacrylamido) pyridine (BMP) as the functional monomer and carboxyphenyl aminohydantoin (CPAH) as the analogue of the template. The binding constants of the complex between BMP and nitrofurantoin or CPAH in DMSO were determined with 1H NMR titration to be 630 ± 104 and 830 ± 146 M⁻¹, respectively. To study the influence of the functional monomer, two polymer compositions were prepared containing the template, the functional monomer and the crosslinker in the molar ratio 1:1:12 for MIP1 and 1:4:20 for MIP2, respectively. The imprinting factor at saturation concentration of nitrofurantoin, which is the ratio of the amount bound to the MIP and the non-imprinted control polymer (NIP), was determined to be 2.47 for MIP1 and 2.49 for MIP2. The cross reactivity of the imprinted polymers seems to be determined by the ability to form hydrogen bonds to the functional monomer while the shape of the molecule has no real influence.     

Red tide blooms of Cochlodinium polykrikoides in a coastal cove

Successive blooms of the dinoflagellate Cochlodinium polykrikoides occurred in Pettaquamscutt Cove, RI, persisting from September through December 1980 and again from April through October 1981. Cell densities varied from <100 cells L⁻¹ at the onset of the bloom and reached a maximum density exceeding 3.4 × 10⁶ cells L⁻¹ during the summer of 1981. The bloom was mainly restricted to the mid to inner region of this shallow cove with greatest concentrations localized in surface waters of the southwestern region during summer/fall periods of both years. Highly motile cells consisting of single, double and multiple cell zooids were found as chains of 4 and 8 cells restricted to the late August/September periods. The highest cell densities occurred during periods when annual temperatures were between 19 and 28 °C and salinities between 25 and 30. A major nutrient source for the cove was Crying Brook, located at the innermost region at the head of the cove. Inorganic nitrogen (NH₃ and NO₂ + NO₃) from the brook was continually detectable throughout the study with maximum values of 57.5 and 82.5 μmol L⁻¹, respectively. Phosphate (PO₄-P) was always present in the source waters and rarely <0.5 μmol L⁻¹; silicate always exceeded 30 μmol L⁻¹ with maximum concentrations reaching 226 μmol L⁻¹. Chlorophyll a and ATP concentrations during the blooms varied directly with cell densities. Maximum Chl a levels were 218 mg m⁻³ and ATP-carbon was >20 g C m⁻³. Primary production by the dinoflagellate-dominated community during the bloom varied between 4.3 and 0.07 g C m⁻³ d⁻¹. Percent carbon turnover calculated from primary production values and ATP-carbon varied from 6 to 129% d⁻¹. The dinoflagellates dominated the entire summer period; other flagellates and diatoms were present in lesser amounts. A combination of low washout rate due to the cove dynamics, active growth, and life cycles involving cysts allowed C. polykrikoides to maintain recurrent bloom populations in this area.     

Kinetic analysis of metal uptake by dry and gel alginate particles

The kinetics of metal uptake by gel and dry calcium alginate beads was analysed using solutions of copper or lead ions. Gel beads sorbed metal ions faster than the dry ones and larger diffusivities of metal ions were calculated for gel beads: approximately 10⁻⁴ cm²/min vs. 10⁻⁶ cm²/min for dry beads. In accordance, scanning electron microscopy and nitrogen adsorption data revealed a low porosity of dry alginate particles. However, dry beads showed higher sorption capacities and a mechanical stability more suitable for large-scale use. Two sorption models were fitted to the kinetic results: the Lagergren pseudo-first order and the Ho and McKay pseudo-second order equations. The former was found to be the most adequate to model metal uptake by dry alginate beads and kinetic constants in the orders of 10⁻³ and 10⁻² min⁻¹ were obtained for lead solutions with concentrations up to 100 g/m³. The pseudo-first order model was also found to be valid to describe biosorbent operation with a real wastewater indicating that it can be used to design processes of metal sorption with alginate-based materials.     

Specific growth rate as a determinant of the carbon isotope composition of the temperate seagrass Zostera marina

The seasonal variability of specific growth rate and the carbon stable isotope ratio (δ¹³C) of leaf blades (δ¹³C_leaf) of a temperate seagrass, Zostera marina (within 10 days old) were measured simultaneously, together with the δ¹³C of dissolved inorganic carbon (δ¹³C_DIC) at three sites in the semi-closed Akkeshi estuary system, northeastern Japan, in June, September, and November 2004. The δ¹³C_leaf ranged from −16.2 to −6.3‰ and decreased from summer to winter. The simultaneous measurement of the δ¹³C_leaf, growth rate, and morphological parameters (mean leaf length and width, mean number of leaves per shoot, and sheath length) of the seagrass and δ¹³C_DIC in the surrounding water allowed us to compare directly the δ¹³C_leaf and specific growth rate of seagrass. The difference in the δ¹³C of seagrass leaves relative to the source DIC (Δδ¹³C_{leaf − DIC}) was the least negative (−11 to −7‰) in June at all three sites and became more negative (−17 to −8‰) as the specific growth rate decreased. This positive correlation between Δδ¹³C_{leaf − DIC} and specific growth rate can be used to diagnose the growth of seagrasses. Δδ¹³C_{leaf − DIC} changed by −1.7 ± 0.2‰ when the leaf specific growth rate decreased by 1% d⁻¹.     

Biosorption of nonylphenol on dead biomass of Rhizopus arrhizus encapsulated in chitosan beads

The nonylphenol (NP) biosorption and desorption potential for fungal biomass used under batch conditions was investigated using kinetics and isotherm models. Fungal biomass of Rhizopus arrhizus TISTR 3610 exhibited preferential uptake of NP, an endocrine disrupting chemicals. Sporangiospores, asexual spores, were immobilised in chitosan beads. The biosorption data of NP on the moist heat inactivated R. arrhizus–chitosan beads were analyzed using four popular adsorption isotherms and, by using non-linear least-regression with the solver add-in in Microsoft Excel, correlated in order with the Fritz–Schluender > Redlich–Peterson > Freundlich > Langmuir isotherms. The pseudo first-order kinetics was found to have the best fit with the experimental data. The diffusivity of NP in the R. arrhizus–chitosan beads was calculated using the shrinking core model, and the diffusivity values were in the ranges of 2.3736 × 10⁻⁴–1.8950 × 10⁻⁴ cm² s⁻¹. Desorption to recover the adsorbed NP from the beads was performed in methanol and was best described using a pseudo second-order kinetic model.     

Nitrogen utilization by the raphidophyte Heterosigma akashiwo: Growth and uptake kinetics in laboratory cultures

The nitrogen uptake and growth capabilities of the potentially harmful, raphidophycean flagellate Heterosigma akashiwo (Hada) Sournia were examined in unialgal batch cultures (strain CCMP 1912). Growth rates as a function of three nitrogen substrates (ammonium, nitrate and urea) were determined at saturating and sub-saturating photosynthetic photon flux densities (PPFDs). At saturating PPFD (110 μE m⁻² s⁻¹), the growth rate of H. akashiwo was slightly greater for cells grown on NH₄⁺ (0.89 d⁻¹) compared to cells grown on NO₃⁻ or urea, which had identical growth rates (0.82 d⁻¹). At sub-saturating PPFD (40 μE m⁻² s⁻¹), both urea- and NH₄⁺-grown cells grew faster than NO₃⁻-grown cells (0.61, 0.57 and 0.46 d⁻¹, respectively). The N uptake kinetic parameters were investigated using exponentially growing batch cultures of H. akashiwo and the ¹⁵N-tracer technique. Maximum specific uptake rates (V_max) for unialgal cultures grown at 15 °C and saturating PPFD (110 μE m⁻² s⁻¹) were 28.0, 18.0 and 2.89 × 10⁻³ h⁻¹ for NH₄⁺, NO₃⁻ and urea, respectively. The traditional measure of nutrient affinity—the half saturation constants (K_s) were similar for NH₄⁺ and NO₃⁻ (1.44 and 1.47 μg-at N L⁻¹), but substantially lower for urea (0.42 μg-at N L⁻¹). Whereas the α parameter (α = V_max/K_s), which is considered a more robust indicator for substrate affinity when substrate concentrations are low (<K_s), were 19.4, 12.2 and 6.88 × 10⁻³ h⁻¹/(μg-at N L⁻¹) for NH₄⁺, NO₃⁻ and urea, respectively. These laboratory results demonstrate that at both saturating and sub-saturating N concentrations, N uptake preference follows the order: NH₄⁺ > NO₃⁻ > urea, and suggests that natural blooms of H. akashiwo may be initiated or maintained by any of the three nitrogen substrates examined.     

Nitric oxide regulates steroid synthesis by bovine antral granulosa cells in a chemically defined medium

Nitric oxide (NO) in bovine ovary has been characterized as one of the controllers of granulosa cells’ (GC) steroidogenesis and apoptosis. One of the pathways used by NO to have these effects is cGMP. The objectives of the present study were to verify the effect of sodium nitroprusside (SNP), a NO donor, on steroidogenesis, cell viability (mitochondrial activity) and GC cell cycle distribution and if this effect occurs by the NO-cGMP signaling pathway with the addition of SNP with or without 1H-[1,2,3] oxadiaziolo[4,3a]quinoxaline-1-one (ODQ), a selective soluble guanylate cyclase inhibitor. The antral GC from 3 to 5 mm diameter cattle follicles was cultured without treatment (control), with ODQ (10⁻⁴ M) and 10⁻⁵, 10⁻³ and 10⁻¹ M SNP with or without ODQ for 24 h. Nitrate/nitrite (NO₃⁻/N0₂⁻) concentrations were evaluated by Griess method, progesterone (P₄) and 17β-estradiol (E₂) concentrations by chemiluminescence, viability and cell cycle stage by MTT method (3-[4,5-dimethylthiazol-2yl]-2,3 dipheniltetrazolium bromide) and flow cytometry, respectively. Nitrate/nitrite concentration in culture medium increased (P < 0.05) in a dose-dependent manner according to SNP concentration added to the culture medium. The GC cultured without treatment, with ODQ and with 10⁻⁵ M SNP in the presence or absence of ODQ developed into cell aggregates and did not vary in cell viability (P > 0.05), while GC cultured with 10⁻³ and 10⁻¹ M SNP with or without ODQ presented disorganized GC aggregates or did not develop into cell aggregates and also had substantially decreased cell viability (mitochondrial activity inhibition) and steroids synthesis (P < 0.05), and effects were not reversed with us of ODQ. Most GC cultured without treatment (control) or with ODQ, 10⁻⁵ and 10⁻³ M SNP with or without ODQ were in the G0/G1 (80–75%) stage and in a lesser proportion (20–25%) in the S + G2/M stage of the cell cycle, while the 10⁻¹ M SNP treatment resulted in GC in G1 phase arrest. The treatment with 10⁻⁵ M SNP increased (P < 0.05) E₂ synthesis and inhibited (P < 0.05) progesterone synthesis. The addition of ODQ reversed (P < 0.05) the stimulatory effect of 10⁻⁵ M SNP treatment on E₂, but not on P₄ synthesis (P > 0.05). These results demonstrated that E₂ synthesis by antral GC from small follicles is modulated by lesser NO concentrations via the cGMP pathway, but not P₄ while steroids inhibition cGMP pathway independent, mitochondrial damage and the interference on cell cycle progression caused by greater NO concentration can lead to cell death.     

ICChI, a glycosylated chitinase from the latex of Ipomoea carnea

A multi-functional enzyme ICChI with chitinase/lysozyme/exochitinase activity from the latex of Ipomoea carnea subsp. fistulosa was purified to homogeneity using ammonium sulphate precipitation, hydrophobic interaction and size exclusion chromatography. The enzyme is glycosylated (14–15%), has a molecular mass of 34.94 kDa (MALDI–TOF) and an isoelectric point of pH 5.3. The enzyme is stable in pH range 5.0–9.0, 80 °C and the optimal activity is observed at pH 6.0 and 60 °C. Using p-nitrophenyl-N-acetyl-β-d-glucosaminide, the kinetic parameters K_m, V_max, K_cat and specificity constant of the enzyme were calculated as 0.5 mM, 2.5 × 10⁻⁸ mol min⁻¹ μg enzyme⁻¹, 29.0 s⁻¹ and 58.0 mM⁻¹ s⁻¹ respectively. The extinction coefficient was estimated as 20.56 M⁻¹ cm⁻¹. The protein contains eight tryptophan, 20 tyrosine and six cysteine residues forming three disulfide bridges. The polyclonal antibodies raised and immunodiffusion suggests that the antigenic determinants of ICChI are unique. The first fifteen N-terminal residues G–E–I–A–I–Y–W–G–Q–N–G–G–E–G–S exhibited considerable similarity to other known chitinases. Owing to these unique properties the reported enzyme would find applications in agricultural, pharmaceutical, biomedical and biotechnological fields.     

Development and characterization in vitro of a catalase-based biosensor for hydrogen peroxide monitoring

There is increasing evidence that hydrogen peroxide (H₂O₂) may act as a neuromodulator in the brain, as well as contributing to neurodegeneration in diseased states, such as Parkinson's disease. The ability to monitor changes in endogenous H₂O₂ in vivo with high temporal resolution is essential in order to further elucidate the roles of H₂O₂ in the central nervous system. Here, we describe the in vitro characterization of an implantable catalase-based H₂O₂ biosensor. The biosensor comprises two amperometric electrodes, one with catalase immobilized on the surface and one without enzyme (blank). The analytical signal is then the difference between the two electrodes. The H₂O₂ sensitivity of various designs was compared, and ranged from 0 to 56 ± 4 mA cm⁻² M⁻¹. The most successful design incorporated a Nafion^® layer followed by a poly-o-phenylenediamine (PPD) polymer layer. Catalase was adsorbed onto the PPD layer and then cross-linked with glutaraldehyde. The ability of the biosensors to exclude interference from ascorbic acid, and other interference species found in vivo, was also tested. A variety of the catalase-based biosensor designs described here show promise for in vivo monitoring of endogenous H₂O₂ in the brain.     

Snail herbivory on submerged macrophytes and nutrient release: Implications for macrophyte management

Radix swinhoei (H. Adams) is a freshwater snail commonly found in shallow regions of Lake Taihu. This research estimated, based on experiments, the consumption rates of R. swinhoei on three young submerged plants (Vallisneria spiralis, Hydrilla verticillata and Potamogeton malaianus) and its rates of nutrient release. Results showed that the snails consumed V. spiralis at the highest rate (23.34 mg g⁻¹ d⁻¹), P. malaianus at a lower rate (11.97 mg g⁻¹ d⁻¹), and H. verticillata at the lowest rate (7.04 mg g⁻¹ d⁻¹). The consumption rates on V. spiralis varied significantly, with snail size, ranging from 13.63 mg g⁻¹ d⁻¹ for large-size snails to 143.42 mg g⁻¹ d⁻¹ for small-size ones.The average nutrient release rates of snails grazing on different macrophytes were 45.93 μg PO₄-P and 0.58 mg NH₄-N g⁻¹ d⁻¹. The food species had a significant effect on NH₄-N release rates but not on PO₄-P. However, the snail size had a significant effect on PO₄-P release rates and not on NH₄-N. The present study indicates that through selective grazing and nutrient release, snails may impose a significant impact on the macrophyte community, which should be considered in managing the macrophytes of a lake.     

Thermodynamic and kinetic analysis of the interaction between hepatitis B surface antibody and antigen on a gold electrode modified with cysteamine and colloidal gold via electrochemistry

Hepatitis B surface antibody (HBsAb) was immobilized to the surface of a gold electrode modified with cysteamine and colloidal gold as matrices to detect hepatitis B surface antigen (HBsAg). Differential pulse voltammetry (DPV) method was used for the investigation of the specific interaction between the immobilized HBsAb and HBsAg in solution, which was followed as a change of peak current in DPV with time. With the modified gold electrode, the differences in affinity of HBsAb with HBsAg at the temperatures of 37 and 40 °C were easily distinguished and the kinetic rate constants (k_ass and k_diss) and kinetic affinity constant K were determined from the curves of current versus time. In addition, the thermodynamic constants, ΔG, ΔH and ΔS, of the interaction at 37 °C were calculated, which were −56.65, −64.54 and −25.45 kJ mol⁻¹, respectively.     

Electrogenerated chemiluminescence ethanol biosensor based on alcohol dehydrogenase functionalized Ru(bpy)3 doped silica nanoparticles

An ethanol biosensor, based on the electrogenerated chemiluminescence of Ru(bpy)₃²⁺-doped silica nanoparticles (RuSiNPs), was investigated in this study. The biosensor was a modified glassy carbon electrode, where alcohol dehydrogenase was crosslinked to RuSiNPs, and then immobilized on the electrode surface using chitosan. The results indicated that the biosensor exhibited excellent performance during ethanol determination with a wide linear range (10⁻⁷ to 10⁻² M), low detection limit (5.0 × 10⁻⁸ M) and good stability.