A high molecular weight silk fibroin scaffold that resists degradation and promotes cell proliferation

The regulation of the biodegradation rate of 3D-regenerated silk fibroin scaffolds and the avoidance of premature collapse are important concerns for their effective applications in tissue engineering. In this study, bromelain, which is specific to sericin, was used to remove sericin from silk, and high molecular weight silk fibroin was obtained after the fibroin fibers were dissolved. Afterwards, a 3D scaffold was prepared via freeze-drying. The Sodium dodecyl sulfate–polyacrylamide gel electrophoresis results showed that the average molecular weight of the regenerated silk fibroin prepared by using the bromelain-degumming method was approximately 142.2 kDa, which was significantly higher than that of the control groups prepared by using the urea- and Na₂CO₃-degumming methods. The results of enzyme degradation in vitro showed that the biodegradation rate and internal three-dimensional structure collapse of the bromelain-degumming fibroin scaffolds were significantly slower than those of the two control scaffolds. The proliferation activity of human umbilical vein vascular endothelial cells inoculated in bromelain-degumming fibroin scaffolds was significantly higher than that of the control scaffolds. This study provides a novel preparation method for 3D-regenerated silk fibroin scaffolds that can effectively resist biodegradation, continuously guide cell growth, have good biocompatibility, and have the potential to be used for the regeneration of various connective tissues.     

Preparation, characterization and biocompatibility of electrospinning heparin-modified silk fibroin nanofibers

In this study, the electrospun silk fibroin nanofibrous scaffolds were modified with heparin by grafting after plasma treatment and blending electrospinning. Morphology, microstructure, chemical composition and grafting efficiency of the heparin-modified silk fibroin nanofibrous scaffolds were characterized to evaluate the effect of modification by means of scanning electron microscopy (SEM), Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectrometer (XPS). The results showed that the heparin was successfully introduced to the silk fibroin nanofibrous scaffolds by both the two kinds of modification, and there was a hydrogen bonding between the silk fibroin and heparin. Moreover, the hydrophilicity, O-containing groups and negative charge density of the heparin-modified scaffolds were enhanced. In vitro coagulation time tests showed that the activated partial thromboplastin time (APTT), prothrombin time (PT) and thrombin time (TT) of the heparin-modified scaffolds were much higher than those of the pure silk fibroin scaffolds. L929 fibroblasts and EVCs spread and proliferated better on the heparin-modified scaffolds than on the pure silk fibroin scaffolds. Macrophages, neutrophils and lymphocytes were not observed in the heparin-modified scaffolds, which indicated that the modified scaffolds could induce minor inflammation in vivo. The results indicated that the electrospun heparin-modified silk fibroin nanofibrous scaffolds could be considered as ideal candidates for tissue engineering scaffolds.     

Silk scaffolds connected with different naturally occurring biomaterials for prostate cancer cell cultivation in 3D

In the present work, different biopolymer blend scaffolds based on the silk protein fibroin from Bombyx mori (BM) were prepared via freeze‐drying method. The chemical, structural, and mechanical properties of the three dimensional (3D) porous silk fibroin (SF) composite scaffolds of gelatin, collagen, and chitosan as well as SF from Antheraea pernyi (AP) and the recombinant spider silk protein spidroin (SSP1) have been systematically investigated, followed by cell culture experiments with epithelial prostate cancer cells (LNCaP) up to 14 days. Compared to the pure SF scaffold of BM, the blend scaffolds differ in porous morphology, elasticity, swelling behavior, and biochemical composition. The new composite scaffold with SSP1 showed an increased swelling degree and soft tissue like elastic properties. Whereas, in vitro cultivation of LNCaP cells demonstrated an increased growth behavior and spheroid formation within chitosan blended scaffolds based on its remarkable porosity, which supports nutrient supply matrix. Results of this study suggest that silk fibroin matrices are sufficient and certain SF composite scaffolds even improve 3D cell cultivation for prostate cancer research compared to matrices based on pure biomaterials or synthetic polymers.     

Immobilization of horseradish peroxidase with a regenerated silk fibroin membrane and its application to a tetrathiafulvalene-mediating H2O2 sensor

Horseradish peroxidase (HRP) was immobilized onto a membrane of the regenerated silk fibroin (RSF) from waste milk. The structure of the blend membrane of RSF and HRP was characterized by the use of IR spectra. A second generation of H₂O₂ sensor on the basis of the immobilized HRP was fabricated, in which tetrathiafulvalene acts as mediating electron transfer between the immobilized enzyme and a glassy carbon electrode. Dependencies of pH and temperature on the H₂O₂ biosensor were checked by utilizing cyclic voltammetry. The sensor exhibits high sensitivity, good reproducibility and storage stability.     

Freeze-gelled silk fibroin protein scaffolds for potential applications in soft tissue engineering

Recently tissue engineering has escalated much interest in biomedical and biotechnological applications. In this regard, exploration of new and suitable biomaterials is needed. Silk fibroin protein is used as one of the most preferable biomaterials for fabrication of scaffolds and several new techniques are being adopted to fabricate silk scaffolds with greater ease, efficiency and perfection. In this study, a freeze gelation technique is used for fabrication of silk fibroin protein 3D scaffolds, which is both time and energy efficient as compared to the conventional freeze drying technique. The fabricated silk fibroin freeze-gelled scaffolds are evaluated micro structurally for morphology with scanning electron microscopy which reveals relatively homogeneous pore structure and good interconnectivity. The pore sizes and porosity of these scaffolds ranges between 60-110 μm and 90-95%, respectively. Mechanical test shows that the compressive strength of the scaffolds is in the range of 20-40 kPa. The applicability to cell culture of the freeze gelled scaffolds has been examined with human keratinocytes HaCat cells which show the good cell viability and proliferation of cells after 5 days of culture suggesting the cytocompatibility. The freeze-gelled 3D scaffolds show comparable results with the conventionally prepared freeze dried 3D scaffolds. Thus, this technique may be used as an alternative method for 3D scaffolds preparation and may also be utilized for tissue engineering applications.     

Fabrication and evaluation of poly(epsilon-caprolactone)/silk fibroin blend nanofibrous scaffold

In this study we investigated the blend electrospinning of poly(?‐caprolactone) (PCL) and silk fibroin (SF) to improve the biodegradability and biocompatibility of PCL‐based nanofibrous scaffolds. Optimal conditions to fabricate PCL/SF (50/50) blend nanofiber were established for electrospinning using formic acid as a cosolvent and three‐dimensional (3D) PCL/SF blend nanofibrous scaffolds were prepared by a modified electrospinning process using methanol coagulation bath. The physical properties of 2D PCL/SF blend nanofiber mats and 3D highly porous blend nanofibrous scaffolds were measured and compared. To evaluate cytocompatibility of the 3D blend scaffolds as compared to 3D PCL nanofibrous scaffold, normal human dermal fibroblasts were cultured. It is concluded that biodegradability and cytocompatibility could be improved for the 3D highly porous PCL/SF (50/50) blend nanofibrous scaffold prepared by blending PCL with SF in electrospinning. In addition to the blending of PCL and SF, the 3D structure and high porosity of electrospun nanofiber assemblies may also be important factors for enhancing the performance of scaffolds. © 2011 Wiley Periodicals, Inc. Biopolymers 97: 265–275, 2012.     

Immobilization of Horseradish Peroxidase on Multi-Wall Carbon Nanotubes and its Electrochemical Properties

Horseradish peroxidase (HRP) was immobilized on carboxylated multi-wall carbon nanotubes in the presence of a coupling reagent, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The immobilized HRP maintained its oxidative activity for guaiacol over a broad range of pH values (4–9). An electrode of graphite rod, 6 mm diam. was fabricated using the immobilized HRP. Cyclic voltammetry of the enzyme electrode confirmed electron transfer between the immobilized HRP and the electrode in the presence of H₂O₂ but without an added mediator or a reducing substrate.     

Impact of pre-incubation time of silk fibroin scaffolds in culture medium on cell proliferation and attachment

Cell behaviours such as proliferation and attachment can be affected by the length of pre-incubation period of the scaffolds in the culture medium for long term. The aim of this study was to investigate the long term pre-incubation of 3D silk fibroin scaffolds in complete culture medium on cell attachment and proliferation. After the preparation of silk fibroin scaffolds by the technique of freeze drying, the scaffolds were pre-incubated in complete culture medium for 2 d, 6 d or 10 d before apical papilla stem cells (SCAP) seeding. Modifications of the scaffold surface and wettability were examined by FE-SEM and water contact angle, respectively. Results showed a decrease both in roughness and water contact angle as pre-incubation time increases. DNA measurement after 18 h and 10 d cell seeding showed a significant increase of DNA concentration which represents better attachment and proliferation with pre-incubation time increase. Qualitative examination, live&dead assay or H&E staining method after 30 h and 10 d cell seeding respectively, indicated that pre-incubation of scaffolds has time dependent effect on cell proliferation and attachment. This suggests that improvement of cell attachment and proliferation may be mediated by differences in the amount of wettability (decreased water contact angle) after exposure of scaffold to culture medium for long term which, in turn, causes more protein adsorption in the surface of silk fibroin scaffold (decreased roughness).     

Tissue-engineered mesh for pelvic floor reconstruction fabricated from silk fibroin scaffold with adipose-derived mesenchymal stem cells

A tissue-engineered mesh fabricated with adipose-derived mesenchymal stem cells (AD-MSCs) cultured on a silk fibroin scaffold is evaluated for use in female pelvic reconstruction. Thirty-five female Sprague Dawley rats were divided into four groups. Group A (n?=?10) were implanted with polypropylene meshes, Group B (n?=?10) with silk fibroin scaffolds and Group C (n?=?10) with tissue-engineered meshes. Group D (n?=?5) acted as the tissue control. The tissue-engineered mesh was produced as follows. AD-MSCs were obtained from adipose tissue of rats designated to Group C. The cells were seeded onto a silk fibroin scaffold, cultured and then observed by scanning electron microscopy (SEM). Histological studies of these meshes were performed at 4 and 12 weeks after implantation and mechanical testing was carried out on all groups before implantation and at 12 weeks after implantation. AD-MSCs displayed fibroblast-like shapes and were able to differentiate into adipocytes or fibroblasts. SEM observation showed that AD-MSCs proliferated and secreted a matrix onto the silk fibroin scaffolds. After implantation of the scaffolds into rats, histological analysis revealed better organized newly formed tissue in Group C than in controls. Group C also had a similar failure force (2.67?±?0.15 vs 2.33?±?0.38 N) and a higher Young’s modulus (2.99?±?0.19 vs 1.68?±?0.20 MPa) than a normal vaginal wall, indicating the potential of this tissue-engineered approach. AD-MSCs were validated as seed cells for tissue engineering. The silk fibroin scaffold thus shows promise for application with AD-MSCs in the fabrication of tissue-engineered mesh with good biocompatibility and appropriate mechanical properties for pelvic floor reconstruction.     

Porous 3-D scaffolds from regenerated silk fibroin

Three fabrication techniques, freeze-drying, salt leaching and gas foaming, were used to form porous three-dimensional silk biomaterial matrixes. Matrixes were characterized for morphological and functional properties related to processing method and conditions. The porosity of the salt leached scaffolds varied between 84 and 98% with a compressive strength up to 175 +/- 3 KPa, and the gas foamed scaffolds had porosities of 87-97% and compressive strength up to 280 +/- 4 KPa. The freeze-dried scaffolds were prepared at different freezing temperatures (-80 and -20 degrees C) and subsequently treated with different concentrations (15 and 25%) and hydrophilicity alcohols. The porosity of these scaffolds was up to 99%, and the maximum compressive strength was 30 +/- 2 KPa. Changes in silk fibroin structure during processing to form the 3D matrixes were determined by FT-IR and XrD. The salt leached and gas foaming techniques produced scaffolds with a useful combination of high compressive strength, interconnected pores, and pore sizes greater than 100 microns in diameter. The results suggest that silk-based 3D matrixes can be formed for utility in biomaterial applications.     

Electrospun PLGA�Csilk fibroin�Ccollagen nanofibrous scaffolds for nerve tissue engineering

Electrospun nanofibrous scaffolds varying different materials are fabricated for tissue engineering. PLGA, silk fibroin, and collagen-derived scaffolds have been proved on good biocompatibility with neurons. However, no systematic studies have been performed to examine the PLGA-silk fibroin-collagen (PLGA-SF-COL) biocomposite fiber matrices for nerve tissue engineering. In this study, different weight ratio PLGA-SF-COL (50:25:25, 30:35:35) scaffolds were produced via electrospinning. The physical and mechanical properties were tested. The average fiber diameter ranged from 280 + 26 to 168 + 21 nm with high porosity and hydrophilicity; the tensile strength was 1.76 ± 0.32 and 1.25 ± 0.20 Mpa, respectively. The results demonstrated that electrospinning polymer blending is a simple and effective approach for fabricating novel biocomposite nanofibrous scaffolds. The properties of the scaffolds can be strongly influenced by the concentration of collagen and silk fibroin in the biocomposite. To assay the cytocompatibility, Schwann cells were seeded on the scaffolds; cell attachment, growth morphology, and proliferation were studied. SEM and MTT results confirmed that PLGA-SF-COL scaffolds particularly the one that contains 50% PLGA, 25% silk fibroin, and 25% collagen is more suitable for nerve tissue engineering compared to PLGA nanofibrous scaffolds.     

A comparison of Thai silk fibroin-based and chitosan-based materials on in vitro biocompatibility for bone substitutes

The novel hybrid scaffolds fabricated from silk fibroin, gelatin, low deacetylation degree chitosan and hydroxyapatite were investigated for their in vitro biocompatibility and osteoconductivity to mouse pre-osteoblast cell line (MC3T3-E1) and rat bone marrow-derived stem cells (MSC). We found that gelatin-conjugated silk fibroin films and scaffolds dominantly promoted cell adhesion and proliferation. Film and scaffold prepared from gelatin-conjugated silk fibroin with hydroxyapatite grown crystals effectively enhanced osteogenic differentiation of both cell types, as evaluated by alkaline phosphatase activity and calcium content. However the blend of hydroxyapatite/low deacetylation degree chitosan hybrid materials did not support cell growth. Furthermore, the blended hydroxyapatite in the bulk scaffold was found to be less effective for osteogenic differentiation than the scaffold with hydroxyapatite grown crystals. The comparative study between MC3T3-E1 and MSC showed that both cell types had similar trend of proliferation and osteogenic differentiation on the same material. Also, higher proliferative rate of MC3T3-E1 than MSC was observed.     

Chitosan-functionalized silk fibroin 3D scaffold for keratocyte culture

The goal of this study was to evaluate the potential suitability of an artificial membrane composed of silk fibroin (SF) functionalized by different ratios of chitosan (CS) as a substrate for the stroma of the cornea. Keratocytes were cultured on translucent membranes made of SF and CS with different ratios. The biophysical properties of the silk fibroin and chitosan (SF/CS) membrane were examined. The SF/CS showed tensile strengths that increased as the CS concentration increased, but the physical and mechanical properties of chitosan-functionalized silk fibroin scaffolds weakened significantly compared with those of native corneas. The resulting cell scaffolds were evaluated using western blot in addition to light and electron microscopy. The cell attachment and proliferation on the scaffold were similar to those on a plastic plate. Keratocytes cultured in serum on SF/CS exhibited stellate morphology along with a marked increase in the expression of keratocan compared with identical cultures on tissue culture plastics. The biocompatibility was tested by transplanting the acellular membrane into rabbit corneal stromal pockets. There was no inflammatory complication detected at any time point on the macroscopic level. Taken together, these results indicate that SF/CS holds promise as a substrate for corneal reconstruction.     

Nanofibrous nonmulberry silk/PVA scaffold for osteoinduction and osseointegration

Poly‐vinyl alcohol and nonmulberry tasar silk fibroin of Antheraea mylitta are blended to fabricate nanofibrous scaffolds for bone regeneration. Nanofibrous matrices are prepared by electrospinning the equal volume ratio blends of silk fibroin (2 and 4 wt%) with poly‐vinyl alcohol solution (10 wt%) and designated as 2SF/PVA and 4SF/PVA, respectively with average nanofiber diameters of 177 ± 13 nm (2SF/PVA) and 193 ± 17 nm (4SF/PVA). Fourier transform infrared spectroscopy confirms retention of the secondary structure of fibroin in blends indicating the structural stability of neo‐matrix. Both thermal stability and contact angle of the blends decrease with increasing fibroin percentage. Conversely, fibroin imparts mechanical stability to the blends; greater tensile strength is observed with increasing fibroin concentration. Blended scaffolds are biodegradable and support well the neo‐bone matrix synthesis by human osteoblast like cells. The findings indicate the potentiality of nanofibrous scaffolds of nonmulberry fibroin as bone scaffolding material. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 271–284, 2015.     

Electrospinning Bombyx mori silk with poly(ethylene oxide)

Electrospinning for the formation of nanoscale diameter fibers has been explored for high-performance filters and biomaterial scaffolds for vascular grafts or wound dressings. Fibers with nanoscale diameters provide benefits due to high surface area. In the present study we explore electrospinning for protein-based biomaterials to fabricate scaffolds and membranes from regenerated silkworm silk, Bombyx mori, solutions. To improve processability of the protein solution, poly(ethylene oxide) (PEO) with molecular weight of 900,000 was blended with the silk fibroin. A variety of compositions of the silk/PEO aqueous blends were successfully electrospun. The morphology of the fibers was characterized using high-resolution scanning electron microscopy. Fiber diameters were uniform and less than 800 nm. The composition was estimated by X-ray photoelectron spectroscopy to characterize silk/PEO surface content. Aqueous-based electrospining of silk and silk/PEO blends provides potentially useful options for the fabrication of biomaterial scaffolds based on this unique fibrous protein.     

Immobilization of glucose oxidase with Bombyx mori silk fibroin by only stretching treatment and its application to glucose sensor

Glucose oxidase (GOD) was immobilized in Bombyx mori silk fibroin membrane by only physical treatment, i.e., stretching without any chemical reagents. This is due to the structural transition of the silk fibroin membrane from random coil to antiparallel beta-sheet (Silk II) induced by the stretching treatment. Permeability coefficients of glucose and oxygen through the fibroin membrane were determined; the permeability of glucose decreased with increasing degree of stretching. The immobilized enzyme activity was characterized with apparent Michaelis constant K(m) (app) and maximal activity V(m). Optimum pH of the activity of the immobilized enzyme was shifted to the value around neutrality, and the activity was maintained to the higher values on both sides of the optimum pH compared with the case of free enzymes. Thermal stability was scarcely lost even at 50 degrees C, although the free enzyme lost about 70% of the original activity. Thus, the stabilities of the enzyme vs. pH and heat were much improved by the immobilization with silk. Glucose sensor prepared with this GOD-immobilized fibroin membrane was developed; the capabilities such as the response time, calibration curve, and repeating usage were determined.     

Silk–PVA Hybrid Nanofibrous Scaffolds for Enhanced Primary Human Meniscal Cell Proliferation

In this study, silk fibroin nanofibrous scaffolds were developed to investigate the attachment and proliferation of primary human meniscal cells. Silk fibroin (SF)–polyvinyl alcohol (PVA) blended electrospun nanofibrous scaffolds with different blend ratios (2:1, 3:1, and 4:1) were prepared. Morphology of the scaffolds was characterized using atomic force microscopy (AFM). The hybrid nanofibrous mats were crosslinked using 25 % (v/v) glutaraldehyde vapor. In degradation study, the crosslinked nanofiber showed slow degradation of 20 % on weight after 35 days of incubation in simulated body fluid (SBF). The scaffolds were characterized with suitable techniques for its functional groups, porosity, and swelling ratio. Among the nanofibers, 3:1 SF:PVA blend showed uniform morphology and fiber diameter. The blended scaffolds had fluid uptake and swelling ratio of 80 % and 458 ± 21 %, respectively. Primary meniscal cells isolated from surgical debris after meniscectomy were subcultured and seeded onto these hybrid nanofibrous scaffolds. Meniscal cell attachment studies confirmed that 3:1 SF:PVA nanofibrous scaffolds supported better cell attachment and growth. The DNA and collagen content increased significantly with 3:1 SF:PVA. These results clearly indicate that a blend of SF:PVA at 3:1 ratio is suitable for meniscus cell proliferation when compared to pure SF-PVA nanofibers.     

A fibroin secretion-deficient silkworm mutant, Nd-sD, provides an efficient system for producing recombinant proteins

The silkworm Nd-s(D) mutant is silk fibroin-secretion deficient. In the mutant, a disulfide linkage between the heavy (H) and light (L) chains, which is essential for the intracellular transport and secretion of fibroin, is not formed because of a partial deletion of the L-chain gene. To utilize the inactivity of the mutant L-chain, we investigated the possibility of using the Nd-s(D) mutant for the efficient production of recombinant proteins in the silkworm. A germ line transformation of the mutant with a normal L-chain-GFP fusion gene was performed. In the transgenic mutant, normal development of the posterior silk gland (PSG) was restored and it formed a normal cocoon. The biochemical analysis showed that the transgenic silkworms expressed the introduced gene in PSG cells, produced a large amount of the recombinant protein, secreted it into the PSG lumen, and used it to construct the cocoon. The molar ratio of silk proteins, H-chain:L-chain-GFP:fibrohexamerin, in the lumen and cocoon in the transgenic silkworm was 6:6:1, and the final product of the fusion gene formed about 10% of the cocoon silk. This indicates that the transgenic mutant silkworm possesses the capacity to produce and secrete the recombinant proteins in a molar ratio equal to that of the fibroin H-chain, contributing around half molecules of the total PSG silk proteins.