Agar overlay method to measure adherence of Staphylococcus epidermidis to four plastic surfaces

The comparative adherence of seven strains of Staphylococcus epidermidis to plastic surfaces was measured by an agar overlay technique in which adherent organisms were counted by their ability to form colonies under an agar overlay. The degree of adherence to plastics decreased in the order polystyrene, polyvinyl chloride, Silastic, and polytetrafluoroethylene.     

Using the Overlay Assay to Qualitatively Measure Bacterial Production of and Sensitivity to Pneumococcal Bacteriocins

Streptococcus pneumoniae colonizes the highly diverse polymicrobial community of the nasopharynx where it must compete with resident organisms. We have shown that bacterially produced antimicrobial peptides (bacteriocins) dictate the outcome of these competitive interactions. All fully-sequenced pneumococcal strains harbor a bacteriocin-like peptide (blp) locus. The blp locus encodes for a range of diverse bacteriocins and all of the highly conserved components needed for their regulation, processing, and secretion. The diversity of the bacteriocins found in the bacteriocin immunity region (BIR) of the locus is a major contributor of pneumococcal competition. Along with the bacteriocins, immunity genes are found in the BIR and are needed to protect the producer cell from the effects of its own bacteriocin. The overlay assay is a quick method for examining a large number of strains for competitive interactions mediated by bacteriocins. The overlay assay also allows for the characterization of bacteriocin-specific immunity, and detection of secreted quorum sensing peptides. The assay is performed by pre-inoculating an agar plate with a strain to be tested for bacteriocin production followed by application of a soft agar overlay containing a strain to be tested for bacteriocin sensitivity. A zone of clearance surrounding the stab indicates that the overlay strain is sensitive to the bacteriocins produced by the pre-inoculated strain. If no zone of clearance is observed, either the overlay strain is immune to the bacteriocins being produced or the pre-inoculated strain does not produce bacteriocins. To determine if the blp locus is functional in a given strain, the overlay assay can be adapted to evaluate for peptide pheromone secretion by the pre-inoculated strain. In this case, a series of four lacZ-reporter strains with different pheromone specificity are used in the overlay.     

Detection of polysaccharide, teichoic acid, and protein antigens in bacterial colonies on an agar surface

An improved method of using fluorescein-labeled antibody for the detection of polysaccharide, protein, and teichoic acid antigens synthesized by streptococcal colonies on an agar surface is described. The bacteria were grown on the surface of an agar medium contained in the shallow well of an immunodiffusion slide. An agar overlay containing the fluorescein antiserum was dispensed over the colonies, excess antiserum was washed out of the overlay agar, and the fluorescent colonies were observed under an ultraviolet microscope. The shallow well in the immunodiffusion slide prevented the agar from floating loose during washing, and the agar overlay prevented the fragmentation and loss of colonies. The thin layer of agar facilitated microscopic examination and the counting of fluorescent and nonfluorescent colonies. Colonies producing an antigen against which the antiserum was directed could readily be distinguished from colonies not producing the antigen. The specificity of the method was shown by using mixtures of streptococci representing six serological groups and five types. Those not known to possess cross-reacting antigens were specific in their reaction to the fluorescein antibody. Cross-reactions between the group antigens of A, C, and G, as reported previously by fluorescent staining of streptococcal suspensions, were also seen. Group A colonies reacted weakly with fluorescent E antibody and vice versa. The extraction of this antigen with cold trichloroacetic acid indicates it was related to the teichoic acids. Colonies possessing polysaccharide, protein, and teichoic acid antigens gave equally strong fluorescent reactions. This procedure permits detection of the synthesis of antigen which could not be observed by the use of a selective medium; it also eliminates the necessity for subculture of each colony and testing by appropriate serological means. Such a technique has value for studies in classification and biochemical genetics, and should be applicable to other genera of bacteria.     

Measurement of the adhesive strength of a gingival cell line to agar

A new technique is described for measuring the adhesive strength of a gingival cell line to an agar substratum by the modification of the original "blister" test for adhesives. A cell monolayer was developed on a Petri dish with a hole in the center of the growing surface, overlayed with agar, and the system pressurized to debond the cells from the agar surface. Pressure changes were measured by a capacitance pressure transducer the output of which was measured by a strip-chart recorder. The modulus (E) of the agar overlay was determined and used in the calculation of the adhesive-bond strength (gammaalpha). The gammaalpha yield for the gingival cell line (cell-agar debond) was 48.8 ergs per cm2, and for the control (no cells) (agar-polystyrene debond) was 30.0 ergs per cm2.     

Agar Overlay Plaquing Technique for Pseudomonas aeruginosa in HeLa Monolayers

The solid agar overlay procedure used for viral plaquing was adapted to the study of Pseudomonas aeruginosa plaques in HeLa monolayers. After adsorption of the organism to the HeLa monolayers, an overlay consisting of 10% newborn calf serum (NBCS), 90% Eagles basal medium (EBM), and 1.5% agar containing neutral red was added. Plaques developed after 24 hr of incubation at 37 C which were indistinguishable from viral lesions. Optimal conditions for plaques included: serum in the adsorption fluid as well as the overlay medium; 1-hr adsorption time; healthy HeLa monolayers; and the presence of EBM. The formation of plaques instead of colonies in agar was due to the inhibitory effect of NBCS or EBM. By omitting both of these components from the overlay, colonies appeared in place of plaques. Adult bovine serum acted in a similar bacterial colony-suppressing fashion, but fetal or agamma calf serum did not. Furthermore, NBCS or adult bovine serum when incorporated in the overlay medium instead of fetal or agamma calf serum displayed a plaque-suppressing effect by reducing the number and size of plaques formed. The findings lend further evidence to support the hypothesis that P. aeruginosa may produce plaques from a protected intracellular site within HeLa cells.     

Culture medium for selective isolation and enumeration of Gram-negative bacteria from ground meats.

We developed a new medium, designated peptone bile amphotericin cycloheximide (PBAC) agar, which contains (per liter) 10 g of peptone, 300 mg of bile salts, 1 mg of amphotericin B, 1 g of cycloheximide, and 15 g of agar. When 21 samples of fresh ground beef were studied and plate count agar counts were used as references, we obtained a mean recovery of 28% of total counts with violet red bile agar overlay, whereas we obtained 48% recovery with PBAC agar. With 12 samples of frozen ground beef, recovery on violet red bile agar overlay was 29% of the recovery on plate count agar, whereas the corresponding value on PBAC agar was 45%. PBAC agar allowed the enumeration of 1.4 times as many gram-negative bacteria as violet red bile agar overlay. None of eight strains of gram-positive bacteria and none of eight strains of yeasts grew on PBAC agar. Of 158 colonies randomly selected from pour plates of eight fresh ground meat samples, 95% stained gram negative. In comparison, only 70% of 151 colonies selected from corresponding plate count agar plates were gram negative. The lack of background color, turbidity, and ease of use make PBAC agar easier to handle than other media used for gram-negative bacteria, such as violet red bile agar, violet red bile agar overlay, and crystal violet tetrazolium agar. In the preparation PBAC agar, all ingredients are autoclaved together except amphotericin B, which is filter sterilized and added before the plates are poured.     

Rapid, Direct Tissue Culture Test for Toxigenicity of Corynebacterium Diphtheriae

A method for testing toxigenicity of Corynebacterium diphtheriae in tissue culture is described. The technique, called the colony overlay test (COT), involves inoculating material from an isolated colony of C. diphtheriae to a small area on the surface of an agar medium which overlays a monolayer of toxin-susceptible HeLa cells. If toxin is produced during incubation at 37 C, it diffuses to the tissue monolayer and destroys the cells below the inoculation site. Twenty-four hours after inoculation, organisms are killed and tissue cells are fixed with formaldehyde. The agar overlay is then removed, and the monolayer is stained with crystal violet. Toxin-affected areas fail to stain or stain poorly. A second plate with antitoxin incorporated in the overlay serves as a control for specificity. Forty-eight strains of C. diphtheriae were tested by the COT, guinea pig, and in vitro, gel diffusion tests. The COT is as specific as the other two tests, is easy to read, and can be used to test large numbers of isolates for toxin action more conveniently than by animal inoculation.     

Fluorescence-based bacterial overlay method for simultaneous in situ quantification of surface-attached bacteria

For quantification of bacterial adherence to biomaterial surfaces or to other surfaces prone to biofouling, there is a need for methods that allow a comparative analysis of small material specimens. A new method for quantification of surface-attached biotinylated bacteria was established by in situ detection with fluorescence-labeled avidin-D. This method was evaluated utilizing a silicon wafer model system to monitor the influences of surface wettability and roughness on bacterial adhesion. Furthermore, the effects of protein preadsorption from serum, saliva, human serum albumin, and fibronectin were investigated. Streptococcus gordonii, Streptococcus mitis, and Staphylococcus aureus were chosen as model organisms because of their differing adhesion properties and their clinical relevance. To verify the results obtained by this new technique, scanning electron microscopy and agar replica plating were employed. Oxidized and poly(ethylene glycol)-modified silicon wafers were found to be more resistant to bacterial adhesion than wafers coated with hydrocarbon and fluorocarbon moieties. Roughening of the chemically modified surfaces resulted in an overall increase in bacterial attachment. Preadsorption of proteins affected bacterial adherence but did not fully abolish the influence of the original surface chemistry. However, in certain instances, mostly with saliva or serum, masking of the underlying surface chemistry became evident. The new bacterial overlay method allowed a reliable quantification of surface-attached bacteria and could hence be employed for measuring bacterial adherence on material specimens in a variety of applications.     

Adherence of organisms to silver-coated surfaces

Pure silver-, silver oxide- and silver chloride-treated surfaces in comparison to polypropylene inhibited both growth and adherence from saline ofSerratia marcescens, Staphylococcus epidermidis, Pseudomonas aeruginosa andCandida albicans. These same organisms demonstrated enhanced adherence to an Ion-Beam-Assisted-Deposited silver surface followed by loss of viability. This type of surface in contrast to the other silver surfaces did not produce zones of inhibition in agar diffusion tests.     

Modified Procedure for the Microscopic and Macroscopic Study of Viral Plaques

A virus plaque method that consistently gives good visual contrast for macroscopic observation and also permits microscopic study is described. Cells are grown in plastic flasks and the gelled overlay medium can be of any desired agar concentration or volume. A fixing solution is used prior to removal of the agar overlay, and dye is added to the fixing solution or staining can follow fixation and agar removal. The bottom of the flask with the fixed monolayer is separated from the rest of the container and handled as a slide. A new mounting medium is described.     

Invasive Activity of Allogromia Pseudopodial Networks: Skyllocytosis of a Gelatin/Agar Gel1

Time-lapse phase-contrast videomicroscopy revealed that the psudopodial network of two allogromiid foraminiferense display an invasive behaviour, previously undescribed, which I term Skyllocytosis (Greek: skylo—to rend, tear, pluck). When these networks encounter an interface between a gelatin/agar overlay and a glass substratum, portions of the overlay are penetrated and partly surrounded by reticulopodia. By the coordinated activity and contraction of these reticulopodia, small segments of the overlay are ripped away. Manageable portions of the overlay are subsequently transported towords the cell body. In carnivorous foraminifera skyllocytosis may account for the removal of soft, autolysed tissues from dead invertebrate prey.     

Fluorescence-Based Bacterial Overlay Method for Simultaneous In Situ Quantification of Surface-Attached Bacteria

For quantification of bacterial adherence to biomaterial surfaces or to other surfaces prone to biofouling, there is a need for methods that allow a comparative analysis of small material specimens. A new method for quantification of surface-attached biotinylated bacteria was established by in situ detection with fluorescence-labeled avidin-D. This method was evaluated utilizing a silicon wafer model system to monitor the influences of surface wettability and roughness on bacterial adhesion. Furthermore, the effects of protein preadsorption from serum, saliva, human serum albumin, and fibronectin were investigated. Streptococcus gordonii, Streptococcus mitis, and Staphylococcus aureus were chosen as model organisms because of their differing adhesion properties and their clinical relevance. To verify the results obtained by this new technique, scanning electron microscopy and agar replica plating were employed. Oxidized and poly(ethylene glycol)-modified silicon wafers were found to be more resistant to bacterial adhesion than wafers coated with hydrocarbon and fluorocarbon moieties. Roughening of the chemically modified surfaces resulted in an overall increase in bacterial attachment. Preadsorption of proteins affected bacterial adherence but did not fully abolish the influence of the original surface chemistry. However, in certain instances, mostly with saliva or serum, masking of the underlying surface chemistry became evident. The new bacterial overlay method allowed a reliable quantification of surface-attached bacteria and could hence be employed for measuring bacterial adherence on material specimens in a variety of applications.     

Appraisal of Media and Methods for Assay of Bacteriophages of Lactic Streptococci

To assess the relative merits of tryptone yeast extract agar, the same medium unbuffered, and medium M17 for the assay of nine bacteriophages of lactic streptococci, comparative plaque counts were made with an overlay of 3 or 9 ml. Four of the phages exhibited no significant difference in plating efficiency between media. The effect of overlay volume varied from strain to strain and was different for different media. The 3-ml overlay created suboptimal atmospheric conditions for those strains which had a special requirement for CO₂. The use of a 9-ml overlay obviated the need to incubate plates under CO₂ and overcame the problems related to special calcium requirements when tryptone yeast extract agar was used. The organic buffer (disodium β-glycerophosphate) was inhibitory to Streptococcus cremoris ML1 and showed no advantage over the inorganic phosphate buffer (K₂HPO₄) for most other strains.     

Repair and Enumeration of Injured Coliforms by a Plating Procedure

Surface plating of coliforms on Trypticase soy agar, followed by 1 to 2 h of incubation at 25 C and subsequent overlay with violet red bile agar, was found to be a useful method for the repair and enumeration of coliforms injured by freezing.     

Measurement of the adhesive strength of a gingival cell line to agar

Summary A new technique is described for measuring the adhesive strength of a gingival cell line to an agar substratum by the modification of the original “blister” test for adhesives. A cell monolayer was developed on a Petri dish with a hole in the center of the growing surface, overlayed with agar, and the system pressurized to debond the cells from the agar surface. Pressure changes were measured by a capacitance pressure transducer the output of which was measured by a strip-chart recorder. The modulus (E) of the agar overlay was determined and used in the calculation of the adhesive-bond strength (γ_a). The (γ_a) yield for the gingival cell line (cell-agar debond) was 48.8 ergs per cm², and for the control (no cells) (agar-polystyrene debond) was 30.0 ergs per cm². This research was supported by National Institute of Dental Research Grand DE 03983-02     

Plating procedure for the enumeration of coliforms from dairy products.

A "repair-detection" procedure consisting of pour plating of food samples with Trypticase soy agar, followed by 1-h repair incubation at room temperature and subsequent overlay with violet red bile agar, was found to be an effective method for the detection of injuried and uninjuried coliforms from dairy products. This method was relatively less effective for the detection of coliforms in many semipreserved foods as compared with dairy products, but more effective than the most-probable-number method.     

Plating procedure for the enumeration of coliforms from dairy products.

A "repair-detection" procedure consisting of pour plating of food samples with Trypticase soy agar, followed by 1-h repair incubation at room temperature and subsequent overlay with violet red bile agar, was found to be an effective method for the detection of injuried and uninjuried coliforms from dairy products. This method was relatively less effective for the detection of coliforms in many semipreserved foods as compared with dairy products, but more effective than the most-probable-number method.     

Adherence of Yersinia enterocolitica to Mammalian Epithelial Cell Lines

Yersinia enterocolitica RIMD 2501003 grown at 25 C avidly adhered to various kinds of cultured epithelial cell lines (HeLa, FL, Y-1 adrenal, human intestine, human conjunctiva) but the bacteria grown at 37 C did not adhere. This phenomenon paralleled the temperature-dependent motility of the bacteria. To clarify the adherence mechanism, we obtained two kinds of mutants, an immobile mutant and a nonadherent mutant, by treatment with A-methyl-A-nitro-A-nitrosoguanidine. The immobile mutant did not move on soft agar but retained the capacity to adhere to cultured epithelial cells when grown at 25 C. The nonadherent mutant did not adhere to cultured epithelial cells but retained the ability to move on soft agar when grown at 25 C. When the bacteria were killed by heat, ultraviolet light irradiation or formaldehyde they lost their capacity to adhere to the cultured epithelial cells. Antiserum against Y. enterocolitica RIMD 2501003 grown at 25 C was absorbed with the bacteria grown at 37 C, with the bacteria grown at 25 C, with the nonadherent mutant grown at 25 C and with the bacteria killed by various means. Only the antiserum absorbed with bacteria grown at 37 C inhibited the adherence of bacteria. These data indicate that motility does not correlate with adherence of Y. enterocolitica. It appears that the adherence factor involves both a temperature-dependent surface factor and a factor synthesized de novo during the interaction of susceptible cells with the bacteria.     

Selection, differentiation and counting of haemolytic Listeria spp. on PALCAM medium

An agar overlay containing sheep erythrocytes and the supernatant fluid of a blood culture of Staphylococcus aureus , poured onto inoculated PALCAM agar plates, allows a reliable visual reading of haemolysis. The method gave up to 95% recovery of Listeria monocytogenes from raw food samples.     

Accelerated Plaque Formation by Fowlpox Virus in the Presence of Chymotrypsin

Chymotrypsin enhanced fowlpox virus plaque formation in chick embryo cell cultures. A simplified plaque assay for fowlpox virus is described. Plaques were produced in 3 days when chymotrypsin was included in a serum-free fluid overlay. Plaques were also produced in 5 to 6 days under an agar overlay when a medium containing fetal calf serum was employed. Kinetics of plaque formation were also studied, and it was shown that fowlpox virus plaque diameters grow at a linear rate.