The reactivity of myeloperoxidase compound I formed with hypochlorous acid

The reaction of human myeloperoxidase (MPO) with hypochlorous acid (HOCl) was investigated by conventional stopped-flow spectroscopy at pH 5, 7, and 9. In the reaction of MPO with HOCl, compound I is formed. Its formation is strongly dependent on pH. HOCl (rather than OCl-) reacts with the unprotonated enzyme in its ferric state. Apparent second-order rate constants were determined to be 8.1 x 10(7) M(-1)s(-1) (pH 5), 2.0 x 10(8) M(-1)s(-1) (pH 7) and 2.0 x 10(6) M(-1)s(-1) (pH 9) at 15 degrees C. Furthermore, the kinetics and spectra of the reactions of halides and thiocyanate and of physiologically relevant one-electron donors (ascorbate, nitrite, tyrosine and hydrogen peroxide) with this compound I were investigated using the sequential-mixing technique. The results show conclusively that the redox intermediates formed upon addition of either hydrogen peroxide or hypochlorous acid to native MPO exhibit the same spectral features and reactivities and thus are identical. In stopped-flow investigations, the MPO/HOCl system has some advantage since: (i) in contrast to H2O2, HOCl cannot function as a one-electron donor of compound I; and (ii) MPO can easily be prevented from cycling by addition of methionine as HOCl scavenger. As a consequence, the observed absorbance changes are bigger and errors in data analysis are smaller.     

A transient kinetic study on the reactivity of recombinant unprocessed monomeric myeloperoxidase

Spectral and kinetic features of the redox intermediates of human recombinant unprocessed monomeric myeloperoxidase (recMPO), purified from an engineered Chinese hamster ovary cell line, were studied by the multi-mixing stopped-flow technique. Both the ferric protein and compounds I and II showed essentially the same kinetic behavior as the mature dimeric protein (MPO) isolated from polymorphonuclear leukocytes. Firstly, hydrogen peroxide mediated both oxidation of ferric recMPO to compound I (1.9 x 10(7) M(-1) s(-1), pH 7 and 15 degrees C) and reduction of compound I to compound II (3.0 x 10(4) M(-1) s(-1), pH 7 and 15 degrees C). With chloride, bromide, iodide and thiocyanate compound I was reduced back to the ferric enzyme (3.6 x 10(4) M(-1) s(-1), 1.4 x 10(6) M(-1) s(-1), 1.4 x 10(7) M(-1) s(-1) and 1.4 x 10(7) M(-1) s(-1), respectively), whereas the endogenous one-electron donor ascorbate mediated transformation of compound I to compound II (2.3 x 10(5) M(-1) s(-1)) and of compound II back to the resting enzyme (5.0 x 10(3) M(-1) s(-1)). Comparing the data of this study with those known from the mature enzyme strongly suggests that the processing of the precursor enzyme (recMPO) into the mature form occurs without structural changes at the active site and that the subunits in the mature dimeric enzyme work independently.     

Spectral and kinetic studies on the formation of eosinophil peroxidase compound I and its reaction with halides and thiocyanate

Compound I of peroxidases takes part in both the peroxidation and the halogenation reaction. This study for the first time presents transient kinetic measurements of the formation of compound I of human eosinophil peroxidase (EPO) and its reaction with halides and thiocyanate, using the sequential-mixing stopped-flow technique. Addition of 1 equiv of hydrogen peroxide to native EPO leads to complete formation of compound I. At pH 7 and 15 degrees C, the apparent second-order rate constant is (4.3 +/- 0.4) x 10(7) M(-1) s(-1). The rate for compound I formation by hypochlorous acid is (5.6 +/- 0.7) x 10(7) M(-1) s(-1). EPO compound I is unstable and decays to a stable intermediate with a compound II-like spectrum. At pH 7, the two-electron reduction of compound I to the native enzyme by thiocyanate has a second-order rate constant of (1.0 +/- 0. 5) x 10(8) M(-1) s(-1). Iodide [(9.3 +/- 0.7) x 10(7) M(-1) s(-1)] is shown to be a better electron donor than bromide [(1.9 +/- 0.1) x 10(7) M(-1) s(-1)], whereas chloride oxidation by EPO compound I is extremely slow [(3.1 +/- 0.3) x 10(3) M(-1) s(-1)]. The pH dependence studies suggest that a protonated form of compound I is more competent in oxidizing the anions. The results are discussed in comparison with those of the homologous peroxidases myeloperoxidase and lactoperoxidase and with respect to the role of EPO in host defense and tissue injury.     

Urate as a physiological substrate for myeloperoxidase: implications for hyperuricemia and inflammation

Urate and myeloperoxidase (MPO) are associated with adverse outcomes in cardiovascular disease. In this study, we assessed whether urate is a likely physiological substrate for MPO and if the products of their interaction have the potential to exacerbate inflammation. Urate was readily oxidized by MPO and hydrogen peroxide to 5-hydroxyisourate, which decayed to predominantly allantoin. The redox intermediates of MPO were reduced by urate with rate constants of 4.6 × 10(5) M(-1) s(-1) for compound I and 1.7 × 10(4) M(-1) s(-1) for compound II. Urate competed with chloride for oxidation by MPO and at hyperuricemic levels is expected to be a substantive substrate for the enzyme. Oxidation of urate promoted super-stoichiometric consumption of glutathione, which indicates that it is converted to a free radical intermediate. In combination with superoxide and hydrogen peroxide, MPO oxidized urate to a reactive hydroperoxide. This would form by addition of superoxide to the urate radical. Urate also enhanced MPO-dependent consumption of nitric oxide. In human plasma, stimulated neutrophils produced allantoin in a reaction dependent on the NADPH oxidase, MPO and superoxide. We propose that urate is a physiological substrate for MPO that is oxidized to the urate radical. The reactions of this radical with superoxide and nitric oxide provide a plausible link between urate and MPO in cardiovascular disease.     

Spectral and kinetic evidence for reaction of superoxide with compound I of myeloperoxidase

Superoxide and myeloperoxidase (MPO) are essential for the oxidative killing of bacteria by neutrophils. Previously, we developed a kinetic model to demonstrate that within the confines of neutrophil phagosomes, superoxide should react exclusively with MPO and be converted to hypochlorous acid. The model consists of all known reactions and rate constants for reactions of superoxide, hydrogen peroxide, and chloride ions with MPO, except for the reaction of superoxide with compound I, which could only be estimated. Compound I is a transitory redox intermediate of MPO that is responsible for oxidizing chloride ions to hypochlorous acid. To tackle the challenge of observing the reaction between two transient species, we combined stopped-flow spectrophotometry with pulse radiolysis. Using this technique, we directly observed the reduction of compound I by superoxide. The rate constant for the reaction was determined to be 5.6±0.3×10(6)M(-1)s(-1). This value establishes superoxide as one of the best substrates for compound I. Based on this value, the rate constant for reduction of compound II by superoxide was determined to be 1.2±0.1×10(6)M(-1)s(-1). Within phagosomes, the reduction of compound I by superoxide will compete with the oxidation of chloride ions so that the relative concentrations of these two substrates will affect the yield of hypochlorous acid. Characterization of this reaction confirms that superoxide is a physiological substrate for MPO and that their interactions are central to an important host defense mechanism.     

Mechanism of reaction of melatonin with human myeloperoxidase

Recently, it was suggested that melatonin (N-acetyl-5-methoxytryptamine) is oxidized by activated neutrophils in a reaction most probably involving myeloperoxidase (Biochem. Biophys. Res. Commun. (2000) 279, 657-662). Myeloperoxidase (MPO) is the most abundant protein of neutrophils and is involved in killing invading pathogens. To clarify if melatonin is a substrate of MPO, we investigated the oxidation of melatonin by its redox intermediates compounds I and II using transient-state spectral and kinetic measurements at 25 degrees C. Spectral and kinetic analysis revealed that both compound I and compound II oxidize melatonin via one-electron processes. The second-order rate constant measured for compound I reduction at pH 7 and pH 5 are (6.1 +/- 0.2) x 10(6) M(-1) s(-1) and (1.0 +/- 0.08) x 10(7) M(-1) s(-1), respectively. The rates for the one-electron reduction of compound II back to the ferric enzyme are (9.6 +/- 0.3) x 10(2) M(-1) s(-1) (pH 7) and (2.2 +/- 0.1) x 10(3) M(-1) s(-1) (pH 5). Thus, melatonin is a much better electron donor for compound I than for compound II. Steady-state experiments showed that the rate of oxidation of melatonin is dependent on the H(2)O(2) concentration, is not affected by superoxide dismutase, and is quickly terminated by sodium cyanide. Melatonin can markedly inhibit the chlorinating activity of MPO at both pH 7 and pH 5. The implication of these findings in the activated neutrophil is discussed.     

Prostaglandin H synthase and hydroperoxides: peroxidase reaction and inactivation kinetics

The reaction kinetics of the peroxidase activity of prostaglandin H synthase have been examined with 15-hydroperoxyeicosatetraenoic acid and hydrogen peroxide as substrates and tetramethylphenylenediamine as cosubstrate. The apparent Km and Vmax values for both hydroperoxides were found to increase linearly with the cosubstrate concentration. The overall reaction kinetics could be interpreted in terms of an initial reaction of the synthase with hydroperoxide to form an intermediate equivalent to horseradish peroxidase Compound I, followed by reduction of this intermediate by cosubstrate to regenerate the resting enzyme. The rate constants estimated for the generation of synthase Compound I were 7.1 X 10(7) M-1 s-1 with the lipid hydroperoxide and 9.1 X 10(4) M-1 s-1 with hydrogen peroxide. The rate constants estimated for the rate-determining step in the regeneration of resting enzyme by cosubstrate were 9.2 X 10(6) M-1 s-1 in the case of the reaction with lipid hydroperoxide and 3.5 X 10(6) M-1 s-1 in the case of reaction with hydrogen peroxide. The intrinsic affinities of the synthase peroxidase for substrate (Ks) were estimated to be on the order of 10(-8) M for lipid hydroperoxide and 10(-5) M for hydrogen peroxide. These affinities are quite similar to the reported affinities of the synthase for these hydroperoxides as activators of the cyclooxygenase. The peroxidase activity was found to be progressively inactivated during the peroxidase reaction. The rate of inactivation of the peroxidase was increased by increases in hydroperoxide level, and decreased by increases in peroxidase cosubstrate. The inactivation of the peroxidase appeared to occur by a hydroperoxide-dependent process, originating from synthase Compound I or Compound II.     

Biochemical characterisation of the recombinant peroxiredoxin (FhePrx) of the liver fluke, Fasciola hepatica

The parasitic helminth Fasciola hepatica secretes a 2-Cys peroxiredoxin (Prx) that may play important functions in host-parasite interaction. Recombinant peroxiredoxin (FhePrx) prevented metal-catalyzed oxidative nicking of plasmid DNA and detoxified hydrogen peroxide when coupled with Escherichia coli thioredoxin and thioredoxin reductase (k(cat)/K(m)=5.2 x 10(5)M(-1)s(-1)). Enzyme kinetic analysis revealed that the catalytic efficiency of FhePrx is similar to other 2-Cys peroxiredoxins; the enzyme displayed saturable enzyme Michaelis-Menten type kinetics with hydrogen peroxide, cumene hydroperoxide and t-butyl hydroperoxide, and is sensitive to concentrations of hydrogen peroxide above 0.5 mM. Like the 2-Cys peroxiredoxins from a related helminth, Schistosoma mansoni, steady-state kinetics indicate that FhePrx exhibits a saturable, single displacement-like reaction mechanism rather than non-saturable double displacement (ping-pong) enzyme substitution mechanism common to other peroxiredoxins. However, unlike the schistosome Prxs, FhePrx could not utilise reducing equivalents supplied by glutathione or glutathione reductase.     

Peroxynitrite efficiently mediates the interconversion of redox intermediates of myeloperoxidase

Nitric oxide-derived oxidants (e.g., peroxynitrite) are believed to participate in antimicrobial activities as part of normal host defenses but also in oxidative tissue injury in inflammatory disorders. A similar role is ascribed to the heme enzyme myeloperoxidase (MPO), the most abundant protein of polymorphonuclear leukocytes, which are the terminal phagocytosing effector cells of the innate immune system. Concomitant production of peroxynitrite and release of millimolar MPO are characteristic events during phagocytosis. In order to understand the mode of interaction between MPO and peroxynitrite, we have performed a comprehensive stopped-flow investigation of the reaction between all physiological relevant redox intermediates of MPO and peroxynitrite. Both iron(III) MPO and iron(II) MPO are rapidly converted to compound II by peroxynitrite in monophasic reactions with calculated rate constants of (6.8+/-0.1) x 10(6) M(-1)s(-1) and (1.3+/-0.2) x 10(6) M(-1)s(-1), respectively (pH 7.0 and 25 degrees C). Besides these one- and two-electron reduction reactions of peroxynitrite, which produce nitrogen dioxide and nitrite, a one-electron oxidation to the oxoperoxonitrogen radical must occur in the fast monophasic transition of compound I to compound II mediated by peroxynitrite at pH 7.0 [(7.6+/-0.1) x 10(6) M(-1)s(-1)]. In addition, peroxynitrite induced a steady-state transition from compound III to compound II with a rate of (1.0+/-0.3) x 10(4) M(-1)s(-1). Thus, the interconversion among the various oxidation states of MPO that is prompted by peroxynitrite is remarkable. Reaction mechanisms are proposed and the physiological relevance is discussed.     

Pre-steady-state kinetics and modelling of the oxygenase and cyclooxygenase reactions of prostaglandin endoperoxide synthase

The pre-steady-state kinetics of the prostaglandin endoperoxide synthase oxygenase reaction with eicosadienoic acids and the cyclooxygenase reaction with arachidonic acid were investigated by stopped-flow spectrophotometry at 426 nm, an isosbestic point between native enzyme and compound I. A similar reaction mechanism for both types of catalysis is defined from combined kinetic experiments and numerical simulations. In the first step a fatty acid hydroperoxide reacts with the native enzyme to form compound I and the fatty acid hydroxide. In the second step the fatty acid reduces compound I to compound II and a fatty acid carbon radical is formed. This is followed by two fast steps: (1) the addition of either one molecule of oxygen (the oxygenase reaction) or two molecules of oxygen (the cyclooxygenase reaction) to the fatty acid carbon radical to form the corresponding hydroperoxyl radical, and (2) the reaction of the hydroperoxyl radical with compound II to form the fatty acid hydroperoxide and a compound I-protein radical. A unimolecular reaction of the compound I-protein radical to reform the native enzyme is assumed for the last step in the cycle. This is a slow reaction not significantly affecting steps 1 and 2 under pre-steady-state conditions. A linear dependence of the observed pseudo-first-order rate constant, k(obs), on fatty acid concentration is quantitatively reproduced by the model for both the oxygenase and cyclooxygenase reactions. The simulated second order rate constants for the conversion of native enzyme to compound I with arachidonic or eicosadienoic acids hydroperoxides as a substrate are 8 x 10(7) and 4 x 10(7) M(-1) s(-1), respectively. The simulated and experimentally obtained second-order rate constants for the conversion of compound I to compound II with arachidonic and eicosadienoic acids as a substrate are 1.2 x 10(5) and 3.0 x 10(5) M(-1) s(-1), respectively.     

Role of the covalent glutamic acid 242-heme linkage in the formation and reactivity of redox intermediates of human myeloperoxidase

In human myeloperoxidase the heme is covalently attached to the protein via two ester linkages between the carboxyl groups of Glu242 and Asp94 and modified methyl groups on pyrrole rings A and C of the heme as well as a sulfonium ion linkage between the sulfur atom of Met243 and the beta-carbon of the vinyl group on pyrrole ring A. In the present study, wild-type recombinant myeloperoxidase (recMPO) and the variant Glu242Gln were produced in Chinese hamster ovary cells and investigated in a comparative sequential-mixing stopped-flow study in order to elucidate the role of the Glu242-heme ester linkage in the individual reaction steps of both the halogenation and peroxidase cycle. Disruption of the ester bond increased heme flexibility, blue shifted the UV-vis spectrum, and, compared with recMPO, decelerated cyanide binding (1.25 x 10(4) versus 1.6 x 10(6) M(-)(1) s(-)(1) at pH 7 and 25 degrees C) as well as compound I formation mediated by either hydrogen peroxide (7.8 x 10(5) versus 1.9 x 10(7) M(-)(1) s(-)(1)) or hypochlorous acid (7.5 x 10(5) versus 2.3 x 10(7) M(-)(1) s(-)(1)). The overall chlorination and bromination activity of Glu242Gln was 2.0% and 24% of recMPO. The apparent bimolecular rate constants of compound I reduction by chloride (65 M(-)(1) s(-)(1)), bromide (5.4 x 10(4) M(-)(1) s(-)(1)), iodide (6.4 x 10(5) M(-)(1) s(-)(1)), and thiocyanate (2.2 x10(5) M(-)(1) s(-)(1)) were 500, 25, 21, and 63 times decreased compared with recMPO. By contrast, Glu242Gln compound I reduction by tyrosine was only 5.4 times decreased, whereas tyrosine-mediated compound II reduction was 60 times slower compared with recMPO. The effects of exchange of Glu242 on electron transfer reactions are discussed.     

Kinetics of interconversion of ferrous enzymes, compound II and compound III, of wild-type synechocystis catalase-peroxidase and Y249F: proposal for the catalatic mechanism

With the exception of catalase-peroxidases, heme peroxidases show no significant ability to oxidize hydrogen peroxide and are trapped and inactivated in the compound III form by H2O2 in the absence of one-electron donors. Interestingly, some KatG variants, which lost the catalatic activity, form compound III easily. Here, we compared the kinetics of interconversion of ferrous enzymes, compound II and compound III of wild-type Synechocystis KatG, the variant Y249F, and horseradish peroxidase (HRP). It is shown that dioxygen binding to ferrous KatG and Y249F is reversible and monophasic with apparent bimolecular rate constants of (1.2 +/- 0.3) x 10(5) M(-1) s(-1) and (1.6 +/- 0.2) x 10(5) M(-1) s(-1) (pH 7, 25 degrees C), similar to HRP. The dissociation constants (KD) of the ferrous-dioxygen were calculated to be 84 microm (wild-type KatG) and 129 microm (Y249F), higher than that in HRP (1.9 microm). Ferrous Y249F and HRP can also heterolytically cleave hydrogen peroxide, forming water and an oxoferryl-type compound II at similar rates ((2.4 +/- 0.3) x 10(5) M(-1) s(-1) and (1.1 +/- 0.2) x 10(5) M(-1) s(-1) (pH 7, 25 degrees C)). Significant differences were observed in the H2O2-mediated conversion of compound II to compound III as well as in the spectral features of compound II. When compared with HRP and other heme peroxidases, in Y249F, this reaction is significantly faster ((1.2 +/- 0.2) x 10(4) M(-1) s(-1))). Ferrous wild-type KatG was also rapidly converted by hydrogen peroxide in a two-phasic reaction via compound II to compound III (approximately 2.0 x 10(5) M(-1) s(-1)), the latter being also efficiently transformed to ferric KatG. These findings are discussed with respect to a proposed mechanism for the catalatic activity.     

A kinetic analysis of the catalase activity of myeloperoxidase

The predominant physiological activity of myeloperoxidase is to convert hydrogen peroxide and chloride to hypochlorous acid. However, this neutrophil enzyme also degrades hydrogen peroxide to oxygen and water. We have undertaken a kinetic analysis of this reaction to clarify its mechanism. When myeloperoxidase was added to hydrogen peroxide in the absence of reducing substrates, there was an initial burst phase of hydrogen peroxide consumption followed by a slow steady state loss. The kinetics of hydrogen peroxide loss were precisely mirrored by the kinetics of oxygen production. Two mols of hydrogen peroxide gave rise to 1 mol of oxygen. With 100 microM hydrogen peroxide and 6 mM chloride, half of the hydrogen peroxide was converted to hypochlorous acid and the remainder to oxygen. Superoxide and tyrosine enhanced the steady-state loss of hydrogen peroxide in the absence of chloride. We propose that hydrogen peroxide reacts with the ferric enzyme to form compound I, which in turn reacts with another molecule of hydrogen peroxide to regenerate the native enzyme and liberate oxygen. The rate constant for the two-electron reduction of compound I by hydrogen peroxide was determined to be 2 x 10(6) M(-1) s(-1). The burst phase occurs because hydrogen peroxide and endogenous donors are able to slowly reduce compound I to compound II, which accumulates and retards the loss of hydrogen peroxide. Superoxide and tyrosine drive the catalase activity because they reduce compound II back to the native enzyme. The two-electron oxidation of hydrogen peroxide by compound I should be considered when interpreting mechanistic studies of myeloperoxidase and may influence the physiological activity of the enzyme.     

Oxidation of cytochrome c peroxidase to compound I by peroxyacids: evidence for rate-limiting diffusion through the protein matrix

The rate of the reaction between p-nitroperoxybenzoic acid and cytochrome c peroxidase (CcP) has been investigated as a function of pH and ionic strength. The pH dependence of the reaction between CcP and peracetic acid has also been determined. The rate of the reactions are influenced by two heme-linked ionizations in the protein. The enzyme is active when His-52 (pK(a) 3.8 +/- 0.1) is unprotonated and an unknown group with a pK(a) of 9.8 +/- 0.1 is protonated. The bimolecular rate constant for the reaction between peracetic acid and CcP and between p-nitroperoxybenzoic acid and CcP are (1.8 +/- 0.1) x 10(7) and (1.6 +/- 0.2) x 10(7) M(-)(1) s(-)(1), respectively. These rates are about 60% slower than the reaction between hydrogen peroxide and CcP. A critical comparison of the pH dependence of the reactions of hydrogen peroxide, peracetic acid, and p-nitroperoxybenzoic acid with CcP provides evidence that both the neutral and anionic forms of the two peroxyacids react directly with the enzyme. The peracetate and p-nitroperoxybenzoate anions react with CcP with rates of (1.5 +/- 0.1) x 10(6) and (1.6 +/- 0.2) x 10(6) M(-)(1) s(-)(1), respectively, about 10 times slower than the neutral peroxyacids. These data indicate that CcP discriminates between the neutral peroxyacids and their negatively charged ions. However, the apparent bimolecular rate constant for reaction between p-nitroperoxybenzoate and CcP is independent of ionic strength in the range of 0.01-1.0 M, suggesting that electrostatic repulsion between the anion and CcP is not the cause of the lower reactivity for the peroxybenzoate anion. The data are consistent with the hypothesis that the rate-limiting step for the oxidation of CcP to compound I by both neutral peroxyacid and the negatively charged peroxide ion is diffusion of the reactants through the protein matrix, from the surface of the protein to the distal heme pocket.     

The reactivity of myeloperoxidase compound I formed with hypochlorous acid

Abstract

The reaction of human myeloperoxidase (MPO) with hypochlorous acid (HOCl) was investigated by conventional stopped-flow spectroscopy at pH 5, 7, and 9. In the reaction of MPO with HOCl, compound I is formed. Its formation is strongly dependent on pH. HOCl (rather than OCl^-) reacts with the unprotonated enzyme in its ferric state. Apparent second-order rate constants were determined to be 8.1×10⁷ M^-1s^-1 (pH 5), 2.0×10⁸ M^-1s^-1 (pH 7) and 2.0×10⁶ M^-1s^-1 (pH 9) at 15°C. Furthermore, the kinetics and spectra of the reactions of halides and thiocyanate and of physiologically relevant one-electron donors (ascorbate, nitrite, tyrosine and hydrogen peroxide) with this compound I were investigated using the sequential-mixing technique. The results show conclusively that the redox intermediates formed upon addition of either hydrogen peroxide or hypochlorous acid to native MPO exhibit the same spectral features and reactivities and thus are identical. In stopped-flow investigations, the MPO/HOCl system has some advantage since: (i) in contrast to H₂O₂, HOCl cannot function as a one-electron donor of compound I; and (ii) MPO can easily be prevented from cycling by addition of methionine as HOCl scavenger. As a consequence, the observed absorbance changes are bigger and errors in data analysis are smaller.     

Catalase-peroxidase (Mycobacterium tuberculosis KatG) catalysis and isoniazid activation

Resonance Raman spectra of native, overexpressed M. tuberculosis catalase-peroxidase (KatG), the enzyme responsible for activation of the antituberculosis antibiotic isoniazid (isonicotinic acid hydrazide), have confirmed that the heme iron in the resting (ferric) enzyme is high-spin five-coordinate. Difference Raman spectra did not reveal a change in coordination number upon binding of isoniazid to KatG. Stopped-flow spectrophotometric studies of the reaction of KatG with stoichiometric equivalents or small excesses of hydrogen peroxide revealed only the optical spectrum of the ferric enzyme with no hypervalent iron intermediates detected. Large excesses of hydrogen peroxide generated oxyferrous KatG, which was unstable and rapidly decayed to the ferric enzyme. Formation of a pseudo-stable intermediate sharing optical characteristics with the porphyrin pi-cation radical-ferryl iron species (Compound I) of horseradish peroxidase was observed upon reaction of KatG with excess 3-chloroperoxybenzoic acid, peroxyacetic acid, or tert-butylhydroperoxide (apparent second-order rate constants of 3.1 x 10(4), 1.2 x 10(4), and 25 M(-1) s(-1), respectively). Identification of the intermediate as KatG Compound I was confirmed using low-temperature electron paramagnetic resonance spectroscopy. Isoniazid, as well as ascorbate and potassium ferrocyanide, reduced KatG Compound I to the ferric enzyme without detectable formation of Compound II in stopped-flow measurements. This result differed from the reaction of horseradish peroxidase Compound I with isoniazid, during which Compound II was stably generated. These results demonstrate important mechanistic differences between a bacterial catalase-peroxidase and the homologous plant peroxidases and yeast cytochrome c peroxidase, in its reactions with peroxides as well as substrates.     

Oxidation of hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone by human myeloperoxidase

Myeloperoxidase is very susceptible to reducing radicals because the reduction potential of the ferric/ferrous redox couple is much higher compared with other peroxidases. Semiquinone radicals are known to reduce heme proteins. Therefore, the kinetics and spectra of the reactions of p-hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone with compounds I and II were investigated using both sequential-mixing stopped-flow techniques and conventional spectrophotometric measurements. At pH 7 and 15 degrees C the rate constants for compound I reacting with p-hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone were determined to be 5.6+/-0.4 x 10(7) M(-1)s(-1), 1.3+/-0.1 x 10(6) M(-1)s(-1) and 3.1+/-0.3 x 10(6) M(-1)s(-1), respectively. The corresponding reaction rates for compound II reduction were calculated to be 4.5+/-0.3 x 10(6) M(-1)s(-1), 1.9+/-0.1 x 10(5) M(-1)s(-1) and 4.5+/-0.2 x 10(4) M(-1)s(-1), respectively. Semiquinone radicals, produced by compounds I and II in the classical peroxidation cycle, promote compound III (oxymyeloperoxidase) formation. We could monitor formation of ferrous myeloperoxidase as well as its direct transition to compound II by addition of molecular oxygen. Formation of ferrous myeloperoxidase is shown to depend strongly on the reduction potential of the corresponding redox couple benzoquinone/semiquinone. With 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone as substrate, myeloperoxidase is extremely quickly trapped as compound III. These MPO-typical features could have potential in designing specific drugs which inhibit the production of hypochlorous acid and consequently attenuate inflammatory tissue damage.     

Reactions of soybean peroxidase and hydrogen peroxide pH 2.4-12.0, and veratryl alcohol at pH 2.4

Peroxidase from soybean seed coat (SBP) has properties that makes it particularly suited for practical applications. Therefore, it is essential to know its fundamental enzymatic properties. Stopped-flow techniques were used to investigate the pH dependence of the reaction of SBP and hydrogen peroxide. The reaction is linearly dependent on hydrogen peroxide concentration at acidic and neutral pH with the second order rate constant k(1)=2.0x10(7) M(-1) s(-1), pH 4-8. From pH 9.3 to 10.2 the reaction is biphasic, a novel observation for a peroxidase at alkaline pH. A fast reaction has the characteristics of the reaction at neutral pH, and a slow reaction shows hyperbolic dependence on hydrogen peroxide concentration. At pH >10.5 only the slow reaction is seen. The shift in mechanism is coincident with the change in haem iron co-ordination to a six-coordinate low spin hydroxy ligated alkaline form. The pK(a) value for the alkaline transition was observed at 9.7+/-0.1, 9.6+/-0.1 and 9.9+/-0.2 by spectrophotometric titration, the fast phase amplitude, and decrease in the apparent second order rate constant, respectively. An acidic pK(a) at 3.2+/-0.3 was also determined from the apparent second order rate constant. The reactions of soybean peroxidase compounds I and II with veratryl alcohol at pH 2.44 give very similar second order rate constants, k(2)=(2.5+/-0.1)x10(4) M(-1) s(-1) and k(3)=(2.2+/-0.1)x10(4) M(-1) s(-1), respectively, which is unusual. The electronic absorption spectra of compounds I, II and III at pH 7.07 show characteristic bands at 400 and 651 nm (compound I), 416, 527 and 555 nm (compound II), and 414, 541 and 576 nm (compound III). No additional intermediates were observed.     

Reaction of ferrous lactoperoxidase with hydrogen peroxide and dioxygen: an anaerobic stopped-flow study

Lactoperoxidase (LPO) is found in mucosal surfaces and exocrine secretions including milk, tears, and saliva and has physiological significance in antimicrobial defense which involves (pseudo-)halide oxidation. LPO compound III (a ferrous-dioxygen complex) is known to be formed rapidly by an excess of hydrogen peroxide and could participate in the observed catalase-like activity of LPO. The present anaerobic stopped-flow kinetic analysis was performed in order to elucidate the catalytic mechanism of LPO and the kinetics of compound III formation by probing the reactivity of ferrous LPO with hydrogen peroxide and molecular oxygen. It is shown that ferrous LPO heterolytically cleaves hydrogen peroxide forming water and oxyferryl LPO (compound II). The two-electron oxidation reaction follows second-order kinetics with the apparent bimolecular rate constant being (7.2+/-0.3) x 10(4) M(-1) s(-1) at pH 7.0 and 25 degrees C. The H2O2-mediated conversion of compound II to compound III follows also second-order kinetics (220 M(-1) s(-1) at pH 7.0 and 25 degrees C). Alternatively, compound III is also formed by dioxygen binding to ferrous LPO at an apparent bimolecular rate constant of (1.8+/-0.2) x 10(5) M(-1) s(-1). Dioxygen binding is reversible and at pH 7.0 the dissociation constant (K(D)) of the oxyferrous form is 6 microM. The rate constant of dioxygen dissociation from compound III is higher than conversion of compound III to ferric LPO, which is not affected by the oxygen concentration and follows a biphasic kinetics. A reaction cycle including the redox intermediates compound II, compound III, and ferrous LPO is proposed, which explains the observed (pseudo-)catalase activity of LPO in the absence of one-electron donors. The relevance of these findings in LPO catalysis is discussed.     

Kinetics of oxidation of serotonin by myeloperoxidase compounds I and II.

The oxidation of serotonin (5-hydroxytryptamine) by the myeloperoxidase intermediates compounds I and II was investigated by using transient-state spectral and kinetic measurements at 25.0 +/- 0.1 degrees C. Rapid scan spectra demonstrated that both compound I and compound II oxidize serotonin via one-electron processes. Rate constants for these reactions were determined using both sequential-mixing and single-mixing stopped-flow techniques. The second order rate constant obtained for the one-electron reduction of compound I to compound II by serotonin is (1.7 +/- 0.1) x 10(7) M(-1) x s(-1), and that for compound II reduction to native enzyme is (1.4 +/- 0.1) x 10(6) M(-1) x s(-1) at pH 7.0. The maximum pH of the compound I reaction with serotonin occurs in the pH range 7.0-7.5. At neutral pH, the rate constant for myeloperoxidase compound I reacting with serotonin is an order of magnitude larger than for its reaction with chloride, (2.2 +/- 0.2) x 10(6) M(-1) x s(-1). A direct competition of serotonin with chloride for myeloperoxidase compound I oxidation was observed. Our results suggest that serotonin may have a role to protect lipoproteins from oxidation and to prevent enzymes from inactivation caused by the potent oxidants HOCl and active oxygen species.