Interactions of a synthetic Leu–Lys-rich antimicrobial peptide with phospholipid bilayers

The interaction of the synthetic antimicrobial peptide P5 (KWKKLLKKPLLKKLLKKL-NH₂) with model phospholipid membranes was studied using solid-state NMR and circular dichroism (CD) spectroscopy. P5 peptide had little secondary structure in buffer, but addition of large unilamellar vesicles (LUV) composed of dimyristoylphosphatidylcholine (DMPC) increased the β-sheet content to ~20%. Addition of negatively charged LUV, DMPC–dimyristoylphosphatidylglycerol (DMPG) 2:1, led to a substantial (~40%) increase of the α-helical conformation. The peptide structure did not change significantly above and below the phospholipid phase transition temperature. P5 peptide interacted differently with DMPC bilayers with deuterated acyl chains (d₅₄-DMPC) and mixed d₅₄-DMPC–DMPG bilayers, used to mimic eukaryotic and prokaryotic membranes, respectively. In DMPC vesicles, P5 peptide had no significant interaction apart from slightly perturbing the upper region of the lipid acyl chain with minimum effect at the terminal methyl groups. By contrast, in the DMPC–DMPG vesicles the peptide increased disorder throughout the entire acyl chain of DMPC in the mixed bilayer. P5 promoted disordering of the headgroup of neutral membranes, observed by ³¹P NMR. However, no perturbations in the T ₁ relaxation nor the T ₂- values were observed at 30°C, although a slight change in the dynamics of the headgroup at 20°C was noticeable compared with peptide-free vesicles. However, the P5 peptide caused similar perturbations of the headgroup of negatively charged vesicles at both temperatures. These data correlate with the non-haemolytic activity of the P5 peptide against red blood cells (neutral membranes) while inhibiting bacterial growth (negatively charged membranes).     

The membrane-binding properties of a class A amphipathic peptide

The membrane-binding properties of a class A amphipathic peptide (18D) were investigated using two different immobilized model membrane systems. The first system involved the use of surface plasmon resonance (SPR) to study the binding of 18D to dimyristylphosphatidylcholine (DMPC) and dimyristylphosphatidylglycerol (DMPG), which allowed peptide binding to be monitored in real time. The SPR experiments indicated stronger binding of 18D to DMPG than DMPC, which kinetic analysis revealed was due to a faster on-rate. The second model membrane system involved immobilized membrane chromatography in which the binding of 18D to either DMPC or DMPG monolayers covalently linked to silica particles was analysed by elution chromatography. Stronger binding affinity of 18D was also obtained with the negatively charged phosphatidylglycerol (PG) monolayer compared to the phosphatidylcholine (PC) monolayer, which was consistent with the SPR results. Non-linear binding behaviour of 18D to the immobilized lipid monolayers was also observed, which suggests that the peptide undergoes conformational and orientational changes upon binding to the immobilized PC and PG ligands. Significant band broadening was also observed on both monolayers, with larger bandwidths obtained on the PC surface, indicating slower binding and orientation kinetics with the zwitterionic surface. The dependence of logk' on the percentage of methanol also demonstrated a bimodal interaction whereby hydrophobic forces predominated at higher temperatures and methanol concentrations, while at lower temperatures, electrostatic and other polar forces also made a contribution to the affinity of the peptides for the lipid monolayer particularly. Overall, these results demonstrate the complementary use of these two lipid biosensors which allows the role of hydrophobic and electrostatic forces in peptide–membrane interactions to be studied and insight gained into the kinetic factors associated with these interactions.     

Thin liquid films and monolayers of DMPC mixed with PEG and phospholipid linked PEG

In this work thin liquid films (TLFs) and monolayers at the air/water interface formed by dimyristoylphosphatidylcholine (DMPC) and by DMPC mixed with poly ethylene glycols (PEGs) and dimyristoylphosphatidylethanolamine (DMPE) linked PEGs were studied. Film forming dispersions were composed of two types of particles: liposomes and micelles. TLFs stability, threshold concentration C _t (i.e., the minimum one for stable film formation), and hydrodynamic behavior were measured. At equivalent conditions, DMPC films were Newton black films (real bilayers), while DMPE-PEGs films were much thicker with free water between the monolayers. DMPE-PEG addition to DMPC films caused both C _t decrease (depending on PEG moiety length and Mw) and change of TLF formation mechanism. TLFs’ hydrodynamic behavior also strongly depended on DMPE-PEG content and Mw. It was observed that thinning of the DMPC and DMPE-PEGs films continued to different film types and thickness, being much thicker for the latter films. Addition of free PEGs (PEG-200/6000) did not alter TLF type or stability, but changed TLF thinning time, confirming that free PEGs with Mw<8000 could not penetrate in the membrane and alter “near-membrane” water layer viscosity. Monolayer studies showed improved formation kinetics of both adsorbed and spread films, decrease of surface tension (equilibrium and dynamic), and of film compression/decompression histeresis area in DMPE-PEGs monolayers compared with DMPC pure films. Our study shows that combining the models of phospholipid TLFs and monolayers provide the opportunity to investigate the properties of membrane surface and to clarify some mechanisms of its interactions with membrane-active agents.     

Effect of Membrane Composition on Antimicrobial Peptides Aurein 2.2 and 2.3 From Australian Southern Bell Frogs

The effects of hydrophobic thickness and the molar phosphatidylglycerol (PG) content of lipid bilayers on the structure and membrane interaction of three cationic antimicrobial peptides were examined: aurein 2.2, aurein 2.3 (almost identical to aurein 2.2, except for a point mutation at residue 13), and a carboxy C-terminal analog of aurein 2.3. Circular dichroism results indicated that all three peptides adopt an α-helical structure in the presence of a 3:1 molar mixture of 1,2-dimyristoyl-sn-glycero-3-phosphocholine/1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DMPC/DMPG), and 1:1 and 3:1 molar mixtures of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPC/POPG). Oriented circular dichroism data for three different lipid compositions showed that all three peptides were surface-adsorbed at low peptide concentrations, but were inserted into the membrane at higher peptide concentrations. The ³¹P solid-state NMR data of the three peptides in the DMPC/DMPG and POPC/POPG bilayers showed that all three peptides significantly perturbed lipid headgroups, in a peptide or lipid composition-dependent manner. Differential scanning calorimetry results demonstrated that both amidated aurein peptides perturbed the overall phase structure of DMPC/DMPG bilayers, but perturbed the POPC/POPG chains less. The nature of the perturbation of DMPC/DMPG bilayers was most likely micellization, and for the POPC/POPG bilayers, distorted toroidal pores or localized membrane aggregate formation. Calcein release assay results showed that aurein peptide-induced membrane leakage was more severe in DMPC/DMPG liposomes than in POPC/POPG liposomes, and that aurein 2.2 induced higher calcein release than aurein 2.3 and aurein 2.3-COOH from 1:1 and 3:1 POPC/POPG liposomes. Finally, DiSC₃5 assay data further delineated aurein 2.2 from the others by showing that it perturbed the lipid membranes of intact S. aureus C622 most efficiently, whereas aurein 2.3 had the same efficiency as gramicidin S, and aurein 2.3-COOH was the least efficient. Taken together, these data show that the membrane interactions of aurein peptides are affected by the hydrophobic thickness of the lipid bilayers and the PG content.     

Kinetic and conformational properties of a novel T-cell antigen receptor transmembrane peptide in model membranes

Core peptide (CP; GLRILLLKV) is a 9-amino acid peptide derived from the transmembrane sequence of the T-cell antigen receptor (TCR) alpha-subunit. CP inhibits T-cell activation both in vitro and in vivo by disruption of the TCR at the membrane level. To elucidate CP interactions with lipids, surface plasmon resonance (SPR) and circular dichroism (CD) were used to examine CP binding and secondary structure in the presence of either the anionic dimyristoyl-L-alpha-phosphatidyl-DL-glycerol (DMPG), or the zwitterionic dimyristoyl-L-alpha-phoshatidyl choline (DMPC).Using lipid monolayers and bilayers, SPR experiments demonstrated that irreversible peptide-lipid binding required the hydrophobic interior provided by a membrane bilayer. The importance of electrostatic interactions between CP and phospholipids was highlighted on lipid monolayers as CP bound reversibly to anionic DMPG monolayers, with no detectable binding observed on neutral DMPC monolayers.CD revealed a dose-dependent conformational change of CP from a dominantly random coil structure to that of beta-structure as the concentration of lipid increased relative to CP. This occurred only in the presence of the anionic DMPG at a lipid : peptide molar ratio of 1.6:1 as no conformational change was observed when the zwitterionic DMPC was tested up to a lipid : peptide ratio of 8.4 : 1.     

Lipid interactions of acylated tryptophan‐methylated lactoferricin peptides by solid‐state NMR

Lactoferricin (LfB) is a 25‐residue innate immunity peptide released by pepsin from the N‐terminal region of bovine lactoferrin. A smaller amidated peptide, LfB6 (RRWQWR‐NH₂) retains antimicrobial activity and is thought to constitute the “antimicrobial active‐site” (Tomita, Acta Paediatr Jpn. 1994; 36 : 585–91). Here we report on N‐acylation of 1‐Me‐Trp⁵‐LfB6, Cn‐RRWQ[1‐Me‐W]R‐NH₂, where Cn is an acyl chain having n = 0, 2, 4, 6 or 12 carbons. Tryptophan 5 (Trp⁵) was methylated to enhance membrane binding and to allow for selective deuteration at that position. Peptide/lipid interactions of Cn‐RRWQ[1‐Me‐W ]R‐NH₂ (deuterated 1‐Me‐Trp⁵ underlined), were monitored by solid state ³¹P NMR and ²H NMR. The samples consisted of macroscopically oriented bilayers of mixed neutral (dimyristoylphosphatidylcholine, DMPC) and anionic (dimyristoylphosphatidylglycerol, DMPG) lipids in a 3:1 ratio with Cn‐RRWQ[&1‐Me‐W ]R‐NH₂ peptides added at a 1:25 peptide to lipid ratio. ²H‐NMR spectra reveal that the acylated peptides are well aligned in DMPC:DMPG bilayers. The ²H NMR quadrupolar splittings suggest that the 1‐Me‐Trp is located in a motionally restricted environment, indicating partial alignment at the membrane interface. ³¹P‐NMR spectra reveal that the lipids are predominantly in a bilayer configuration, with little perturbation by the peptides. Methylation alone, in C0‐RRWQ[1‐Me‐W ]R‐NH₂, resulted in a 3–4 fold increase in antimicrobial activity against E. coli. N‐acylation with a C12 fatty acid enhanced activity almost 90 fold. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Binding of Pediocin PA-1 with Anionic Lipid Induces Model Membrane Destabilization

To obtain molecular insights into the action mode of antimicrobial activity of pediocin PA-1, the interactions between this bacteriocin and dimyristoylphosphatidylcholine (DMPC) or dimyristoylphosphatidylglycerol (DMPG) model membranes have been investigated in D₂O at pD 6 by Fourier transform infrared spectroscopy. The interactions were monitored with respect to alteration of the secondary structure of pediocin, as registered by the amide I′ band, and phospholipid conformation, as revealed by the methylene ν_s(CH₂) and carbonyl ν(C=O) stretching vibrations. The results show that no interaction between pediocin and DMPC occurs. By contrast, pediocin undergoes a structural reorganization in the presence of DMPG. Upon heating, pediocin self-aggregates, which is not observed for this pD in aqueous solution. The gel-to-crystalline phase transition of DMPG shifts to higher temperatures with a concomitant dehydration of the interfacial region. Our results indicate that pediocin is an extrinsic peptide and that its action mechanism may lie in a destabilization of the cell membrane.     

Structural effects of the antimicrobial peptide maculatin 1.1 on supported lipid bilayers

The interactions of the antimicrobial peptide maculatin 1.1 (GLFGVLAKVAAHVVPAIAEHF-NH₂) with model phospholipid membranes were studied by use of dual polarisation interferometry and neutron reflectometry and dimyristoylphosphatidylcholine (DMPC) and mixed DMPC–dimyristoylphosphatidylglycerol (DMPG)-supported lipid bilayers chosen to mimic eukaryotic and prokaryotic membranes, respectively. In DMPC bilayers concentration-dependent binding and increasing perturbation of bilayer order by maculatin were observed. By contrast, in mixed DMPC–DMPG bilayers, maculatin interacted more strongly and in a concentration-dependent manner with retention of bilayer lipid order and structure, consistent with pore formation. These results emphasise the importance of membrane charge in mediating antimicrobial peptide activity and emphasise the importance of using complementary methods of analysis in probing the mode of action of antimicrobial peptides.     

Influence of surfactant protein C on the interfacial behavior of phosphatidylethanolamine monolayers

In the current work we study with monolayer tensiometry and Brewster angle microscopy (BAM) the surface properties of Dipalmitoleoylphosphatidylethanolamine (DPoPE) films at the air/water interface in presence and absence of specific surfactant protein C (SP-C). DPoPE is used, as it readily forms both lamellar (L_α) and non-lamellar inverted hexagonal (H_II) phases and appears as a suitable model phospholipid for probing the interfacial properties of distinct lipid phases. At pure air/water interface L_α shows faster adsorption and better surface disintegration than H_II phase. The interaction of DPoPE molecules with SP-C (predeposited at the interface) results in equalizing of the interfacial disintegration of the both phases (reaching approximately the same equilibrium surface tension) although the adsorption kinetics of the lamellar phase remains much faster. Monolayer compression/decompression cycling revealed that the effect of SP-C on dynamic surface tensions (γ _max and γ _min) of mixed films is remarkably different for the two phases. If γ _max for L_α decreased from the first to the third cycle, the opposite effect is registered for H_II where γ _max increases during cycling. Also the significant decrease of γ _min for L_α in SP-C presence is not observed for H_II phase. BAM studies reveal the formation of more uniform and homogeneously packed DPoPE monolayers in the presence of SP-C.     

Characterization of the structure and membrane interaction of the antimicrobial peptides aurein 2.2 and 2.3 from Australian southern bell frogs

The structure and membrane interaction of the antimicrobial peptide aurein 2.2 (GLFDIVKKVVGALGSL-CONH(2)), aurein 2.3 (GLFDIVKKVVGAIGSL-CONH(2)), both from Litoria aurea, and a carboxy C-terminal analog of aurein 2.3 (GLFDIVKKVVGAIGSL-COOH) were studied to determine which features of this class of peptides are key to activity. Circular dichroism and solution-state NMR data indicate that all three peptides adopt an alpha-helical structure in the presence of trifluoroethanol or lipids such as 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and a 1:1 mixture of DMPC and 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DMPG). Oriented circular dichroism was used to determine the orientation of the peptides in lipid bilayers over a range of concentrations (peptide/lipid molar ratios (P/L) = 1:15-1:120) in DMPC and 1:1 DMPC/DMPG, in the liquid crystalline state. The results demonstrate that in DMPC all three peptides are surface adsorbed over a range of low peptide concentrations but insert into the bilayers at high peptide concentrations. This finding is corroborated by (31)P-solid-state NMR data of the three peptides in DMPC, which shows that at high peptide concentrations the peptides perturb the membrane. Oriented circular dichroism data of the aurein peptides in 1:1 DMPC/DMPG, on the other hand, show that the peptides with amidated C-termini readily insert into the membrane bilayers over the concentration range studied (P/L = 1:15-1:120), whereas the aurein 2.3 peptide with a carboxy C-terminus inserts at a threshold concentration of P/L* between 1:80 and 1:120. Overall, the data presented here suggest that all three peptides studied interact with phosphatidylcholine membranes in a manner which is similar to aurein 1.2 and citropin 1.1, as reported in the literature, with no correlation to the reported activity. On the other hand, both aurein 2.2 and aurein 2.3 behave similarly in phosphatidylcholine/phosphatidylglycerol (PC/PG) membranes, whereas aurein 2.3-COOH inserts less readily. As this does not correlate with reported activities, minimal inhibitory concentrations of the three peptides against Staphylococcus aureus (strain C622, ATCC 25923) and Staphylococcus epidermidis (strain C621--clinical isolate) were determined. The correlation between structure, membrane interaction, and activity are discussed in light of these results.     

Model study of interactions of high-molecular dextran sulfate with lipid monolayers and foam films

The interaction of high-molecular dextran sulfate (DS-5000) with dimyristoylphosphatidylcholine (DMPC) monolayers and foam films (FF) at the air–water interface in the presence of Ca²⁺ and Na⁺ ions was studied. DS-5000 was added in monolayer films (MF) and in FF as monomer molecules and in liposomal form. When added in liposomal form in FF, DS-5000 decreased the stability of DMPC common black films (CBF), and no formation of Newton black films (NBF) was observed. However, when included as monomer molecules in FF, DS-5000 caused film thinning, and drastically decreased the expansion rate of the black spots and transition of thick films to NBF, thus avoiding formation of CBF. The above effects were observed in both gel and liquid-crystalline phase states of DMPC in the presence of Ca²⁺ ions only, and not in the presence of Na⁺ ions. We postulate that the interaction of DMPC with DS-5000 in the plane of FF is mediated by Ca²⁺ bridges and results in dehydration of the DMPC polar heads. The interaction between DMPC and DS-5000 in monolayers resulted in slower adsorption and spreading of DMPC molecules at the interface, lower monolayer surface pressure, and penetration of DS-5000 molecules to DMPC monolayers when surface lipid density was higher than 50 Ų per DMPC molecule. The applicability of the FF model for studying the interactions of phospholipids with polysaccharides at interfaces surrounded by bulk solution, and for modeling such interactions in biological systems, e.g. LDL adhesion to the arterial walls, aggregation and fusion of liposomes, etc., is discussed.     

Effect of acyl chain structure and bilayer phase state on binding and penetration of a supported lipid bilayer by HPA3

The effect of acyl chain structure and bilayer phase state on binding and penetration by the peptide HPA3 was studied using dual polarisation interferometry. This peptide is an analogue of Hp(2-20) derived from the N-terminus of Helicobacter pylori ribosomal protein L1 (RpL1) which has been shown to have antimicrobial and cell-penetrating properties. The binding of HPA3 to zwitterionic 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) or 1-palmitolyl-2-oleyl-sn-glycero-3-phosphocholine (POPC) and negatively charged membranes composed of DMPC and 1,2-dimyristoyl-sn-glycero-3-(phosphor-rac-(1-glycerol)) (DMPG) or POPC and 1-palmitolyl-2-oleyl-sn-glycero-3-(phosphor-rac-(1-glycerol)) (POPG) was determined using dual polarisation interferometry (DPI). Mass and birefringence were measured in real time, enabling the creation of birefringence–mass plots for detailed analysis of the changes in lipid bilayer order during the peptide-binding process. HPA3 bound to all four lipids and the binding progressed as a single phase for the saturated gel phase bilayers DMPC and DMPC–DMPG. However, the binding process involved two or more phases, with penetration of the unsaturated fluid phase POPC and POPC–POPG bilayers. Structural changes in the saturated bilayer were partially reversible whereas binding to the unsaturated bilayer resulted in irreversible changes in membrane structure. These results demonstrate that more disordered unsaturated bilayers are more susceptible to further disorganisation and have a lower capacity to recover from peptide-induced structural changes than saturated ordered bilayers. In addition, this study further establishes DPI as powerful tool for analysis of multiphase peptide-insertion processes associated with complex structural changes in the liquid-crystalline membrane.     

Real-time quantitative analysis of lipid disordering by aurein 1.2 during membrane adsorption, destabilisation and lysis

Effective antimicrobial peptides (AMPs) distinguish between the host and microbial cells, show selective antimicrobial activity and exhibit a fast killing mechanism. Although understanding the structure-function characteristics of AMPs is important, the impact of the peptides on the architecture of membranes with different lipid compositions is also critical in understanding the molecular mechanism and specificity of membrane destabilisation. In this study, the destabilisation of supported lipid bilayers (SLBs) by the AMP aurein 1.2 was quantitatively analysed by dual polarisation interferometry. The lipid bilayers were formed on a planar silicon oxynitride chip, and composed of mixed synthetic lipids, or Escherichiacoli lipid extract. The molecular events leading sequentially from peptide adsorption to membrane lysis were examined in real time by changes in bilayer birefringence (lipid molecular ordering) as a function of membrane-bound peptide mass. Aurein 1.2 bound weakly without any change in membrane ordering at low peptide concentration (5 μM), indicating a surface-associated state without significant perturbation in membrane structure. At 10 μM peptide, marked reversible changes in molecular ordering were observed for all membranes except DMPE/DMPG. However, at 20 μM aurein 1.2, removal of lipid molecules, as determined by mass loss with a concomitant decrease in birefringence during the association phase, was observed for DMPC and DMPC/DMPG SLBs, which indicates membrane lysis by aurein. The membrane destabilisation induced by aurein 1.2 showed cooperativity at a particular peptide/lipid ratio with a critical mass/molecular ordering value. Furthermore, the extent of membrane lysis for DMPC/DMPG was nearly double that for DMPC. However, no lysis was observed for DMPC/DMPG/cholesterol, DMPE/DMPG and E. coli SLBs. The extent of birefringence changes with peptide mass suggested that aurein 1.2 binds to the membrane without inserting through the bilayer and membrane lysis occurs through detergent-like micellisation above a critical P/L ratio. Real-time quantitative analysis of the structural properties of membrane organisation has allowed the membrane destabilisation process to be resolved into multiple steps and provides comprehensive information to determine the molecular mechanism of aurein 1.2 action.     

Determining the Mode of Action Involved in the Antimicrobial Activity of?Synthetic Peptides: A Solid-State NMR and FTIR Study

We have previously shown that leucine to lysine substitution(s) in neutral synthetic crown ether containing 14-mer peptide affect the peptide structure and its ability to permeabilize bilayers. Depending on the substitution position, the peptides adopt mainly either a α-helical structure able to permeabilize dimyristoylphosphatidylcholine (DMPC) and dimyristoylphosphatidylglycerol (DMPG) vesicles (nonselective peptides) or an intermolecular β-sheet structure only able to permeabilize DMPG vesicles (selective peptides). In this study, we have used a combination of solid-state NMR and Fourier transform infrared spectroscopy to investigate the effects of nonselective α-helical and selective intermolecular β-sheet peptides on both types of bilayers. ³¹P NMR results indicate that both types of peptides interact with the headgroups of DMPC and DMPG bilayers. ²H NMR and Fourier transform infrared results reveal an ordering of the hydrophobic core of bilayers when leakage is noted, i.e., for DMPG vesicles in the presence of both types of peptides and DMPC vesicles in the presence of nonselective peptides. However, selective peptides have no significant effect on the ordering of DMPC acyl chains. The ability of these 14-mer peptides to permeabilize lipid vesicles therefore appears to be related to their ability to increase the order of the bilayer hydrophobic core.     

The membrane insertion of helical antimicrobial peptides from the N-terminus of Helicobacter pylori ribosomal protein L1

The interaction of two helical antimicrobial peptides, HPA3 and HPA3P with planar supported lipid membranes was quantitatively analysed using two complementary optical biosensors. The peptides are analogues of Hp(2-20) derived from the N-terminus of Helicobacter pylori ribosomal protein L1 (RpL1). The binding of these two peptide analogues to zwitterionic dimyristoyl-phosphatidylcholine (DMPC) and negatively charged membranes composed of DMPC/dimyristoylphosphatidylglycerol (DMPG) (4:1) was determined using surface plasmon resonance (SPR) and dual polarisation interferometry (DPI). Using SPR analysis, it was shown that the proline substitution in HPA3P resulted in much lower binding for both zwitterionic and anionic membranes than HPA3. Structural changes in the planar DMPC and DMPC/DMPG (4:1) bilayers induced by the binding of both Hp(2-20) analogues were then resolved in real-time with DPI. The overall process of peptide-induced changes in membrane structure was analysed by the real-time changes in bound peptide mass as a function of bilayer birefringence. The insertion of both HPA3 and HPA3P into the supported lipid bilayers resulted in a decrease in birefringence with increasing amounts of bound peptide which reflects a decrease in the order of the bilayer. The binding of HPA3 to each membrane was associated with a higher level of bound peptide and greater membrane lipid disordering and a faster and higher degree of insertion into the membrane than HPA3P. Furthermore, the binding of both HPA3 and HPA3P to negatively charged DMPC/DMPG bilayers also leads to a greater disruption of the lipid ordering. These results demonstrate the geometrical changes in the membrane upon peptide insertion and the extent of membrane structural changes can be obtained quantitatively. Moreover, monitoring the effect of peptides on a structurally characterised bilayer has provided further insight into the role of membrane structure changes in the molecular basis of peptide selectivity and activity and may assist in defining the mode of antimicrobial action.     

Molecular Dynamics Simulations of Mixed Acidic/Zwitterionic Phospholipid Bilayers

Anionic lipids are key components in the cell membranes. Many cell-regulatory and signaling mechanisms depend upon a complicated interplay between them and membrane-bound proteins. Phospholipid bilayers are commonly used as model systems in experimental or theoretical studies to gain insight into the structure and dynamics of biological membranes. We report here 200-ns-long MD simulations of pure (DMPC and DMPG) and mixed equimolar (DMPC/DMPG, DMPC/DMPS, and DMPC/DMPA) bilayers that each contain 256 lipids. The intra- and intermolecular interaction patterns in pure and mixed bilayers are analyzed and compared. The effect of monovalent ions (Na⁺) on the formation of salt-bridges is investigated. In particular, the number of Na⁺-mediated clusters in the presence of DMPS is higher than with DMPG and DMPA. We observe a preferential clustering of DMPS (and to some extent DMPA) lipids together rather than with DMPC molecules, which can explain the phase separation observed experimentally for DMPC/DMPS and DMPC/DMPA bilayers.     

Effect of headgroup on the dipole potential of phospholipid vesicles

The dipole potentials, ψ _d, of phospholipid vesicles composed of pure dimyristoylphosphatidylcholine (DMPC) or vesicles in which 50 mol% of the DMPC was substituted by dimyristoylphosphatidylserine (DMPS), dimyristoylphosphatidylglycerol (DMPG), dimyristoylethanolamine (DMPE), dimyristoylphosphatidic acid (DMPA) or monomyristoylphosphatidylcholine (MMPC) were measured via a fluorescent ratiometric method utilizing the probe di-8-ANEPPS. The PS and PG headgroups were found to cause only minor changes in ψ _d. PE caused an increase in ψ _d of 51 mV. This could be explained by a decrease in the dielectric constant of the glycerol backbone region as well as a movement of the P⁻–N⁺ dipole of the less bulky PE headgroup to a position more parallel to the membrane surface than in PC. The negatively charged PA headgroup increases ψ _d by 215 mV relative to PC alone. This indicates that the positive pole of the dipole predominantly responsible for the dipole potential is located at a position closer to the interior of the membrane than the phosphate group. The increase in the charge of the negative pole of the dipole by the phosphate group of PA increases the electrical potential drop across the lipid headgroup region. The incorporation of the single chain lipid MMPC into the membrane causes a decrease in ψ _d of 142 mV. This can be explained by a decrease in packing density within the membrane of carbonyl dipoles from the sn-2 chain of DMPC. The results presented should contribute to a better understanding of the electrical effect of lipid headgroups on the functioning of membrane proteins.     

Orientation and lipid-peptide interactions of gramicidin A in lipid membranes: polarized attenuated total reflection infrared spectroscopy and spin-label electron spin resonance

Gramicidin A was incorporated at a peptide/lipid ratio of 1:10 mol/mol in aligned bilayers of dimyristoyl phosphatidylcholine (DMPC), phosphatidylserine (DMPS), phosphatidylglycerol (DMPG), and phosphatidylethanolamine (DMPE), from trifluoroethanol. Orientations of the peptide and lipid chains were determined by polarized attenuated total reflection infrared spectroscopy. Lipid-peptide interactions with gramicidin A in DMPC bilayers were studied with different spin-labeled lipid species by using electron spin resonance spectroscopy. In DMPC membranes, the orientation of the lipid chains is comparable to that in the absence of peptide, in both gel and fluid phases. In gel-phase DMPC, the effective tilt of the peptide exceeds that of the lipid chains, but in the fluid phase both are similar. For gramicidin A in DMPS, DMPG, and DMPE, the degree of orientation of the peptide and lipid chains is less than in DMPC. In the fluid phase of DMPS, DMPG, and DMPE, gramicidin A is also less well oriented than are the lipid chains. In DMPE especially, gramicidin A is largely disordered. In DMPC membranes, three to four lipids per monomer experience direct motional restriction on interaction with gramicidin A. This is approximately half the number of lipids expected to contact the intramembranous perimeter of the gramicidin A monomer. A selectivity for certain negatively charged lipids is found in the interaction with gramicidin A in DMPC. These results are discussed in terms of the integration of gramicidin A channels in lipid bilayers, and of the interactions of lipids with integral membrane proteins.     

Membrane interactions in small fast-tumbling bicelles as studied by 31P NMR

Small fast-tumbling bicelles are ideal for studies of membrane interactions at molecular level; they allow analysis of lipid properties using solution-state NMR. In the present study we used ³¹P NMR relaxation to obtain detailed information on lipid head-group dynamics. We explored the effect of two topologically different membrane-interacting peptides on bicelles containing either dimyristoylphosphocholine (DMPC), or a mixture of DMPC and dimyristoylphosphoglycerol (DMPG), and dihexanoylphosphocholine (DHPC). KALP21 is a model transmembrane peptide, designed to span a DMPC bilayer and dynorphin B is a membrane surface active neuropeptide. KALP21 causes significant increase in bicelle size, as evidenced by both dynamic light scattering and ³¹P T₂ relaxation measurements. The effect of dynorphin B on bicelle size is more modest, although significant effects on T₂ relaxation are observed at higher temperatures. A comparison of ³¹P T₁ values for the lipids with and without the peptides showed that dynorphin B has a greater effect on lipid head-group dynamics than KALP21, especially at elevated temperatures. From the field-dependence of T₁ relaxation data, a correlation time describing the overall lipid motion was derived. Results indicate that the positively charged dynorphin B decreases the mobility of the lipid molecules  – in particular for the negatively charged DMPG – while KALP21 has a more modest influence. Our results demonstrate that while a transmembrane peptide has severe effects on overall bilayer properties, the surface bound peptide has a more dramatic effect in reducing lipid head-group mobility. These observations may be of general importance for understanding peptide–membrane interactions.     

Interaction of Phospholipid and Antibiotic Ionophores,Gramicidin A′ and Valinomycin,in Mixed Monolayers

To obtain information concerning the effects of ionophores on biological membranes, the thermotropic behavior of ionophores such as gramicidin A′ and valinomycin in monolayers was investigated by measuring the surface pressure–area (π–A) and the surface viscosity-area (η_s–A) isotherms. Gramicidin A’ had an isotherm having the transition from a liquid-expanded through an intermediate to a condensed state, while valinomycin had a concave isotherm. The π–A isotherms for two ionophores had a decremental shift with increasing temperatures, depending upon a variety of their molecular structures. A distinct difference between the two ionophores in η_s–A isotherms was observed. In addition, the interaction of dimyristoylphosphatidylcholine (DMPC) with the two ionophores in mixed monolayers was investigated. When valinomycin was mixed with DMPC, no deviation from the additivity rule occurred below and above the phase transition temperature T_c of DMPC. However, when gramicidin A′ was mixed with DMPC, a considerable negative deviation from ideal mixing occurred below T_c, suggesting the formation of an irregular ripple structure.