A comparison of folding techniques in the chemical synthesis of the epidermal growth factor-like domain in neu differentiation factor alpha/beta.

The 52-residue alpha/beta chimera of the epidermal growth factor-like domain in neu differentiation factor (NDFealpha/beta) has been synthesized and folded to form a three disulfide bridge (Cys182-Cys196, Cys190-Cys210, Cys212-Cys221) containing peptide. We investigated two general strategies for the formation of the intramolecular disulfide bridges including, the single-step approach, which used fully deprotected and reduced peptide, and a sequential approach that relied on orthogonal cysteine protection in which specific pairs are excluded from the first oxidation step. Because there are 15 possible disulfide bridge arrangements in a peptide with six cysteines, the one-step approach may not always provide the desired disulfide pairing. Here, we compare the single-step approach with a systematic evaluation of the sequential approach. We employed the acetamidomethyl group to protect each pair of cysteines involved in disulfide bridges, i.e. Cys182 to Cys196, Cys190 to Cys210 and Cys212 to Cys221. This reduced the number of possible disulfide patterns from 15 to three in the first folding step. We compared the efficiencies of folding for each protected pair using RP-HPLC, mapped the disulfide connectivity of the predominant product and then formed the final disulfide from the partially folded intermediate via 12 oxidation. Only the peptide having the Cys182-Cys196 pair blocked with acetamidomethyl forms the desired disulfide isomer (Cys190-Cys210/Cys212-Cys221) as a single homogeneous product. By optimizing both approaches, as well as other steps in the synthesis, we can now rapidly provide large-scale syntheses of NDFealpha/beta and other novel EGF-like peptides.     

2,2′‐Dipyridyl diselenide: A chemoselective tool for cysteine deprotection and disulfide bond formation

There are many examples of bioactive, disulfide‐rich peptides and proteins whose biological activity relies on proper disulfide connectivity. Regioselective disulfide bond formation is a strategy for the synthesis of these bioactive peptides, but many of these methods suffer from a lack of orthogonality between pairs of protected cysteine (Cys) residues, efficiency, and high yields. Here, we show the utilization of 2,2′‐dipyridyl diselenide (PySeSePy) as a chemical tool for the removal of Cys‐protecting groups and regioselective formation of disulfide bonds in peptides. We found that peptides containing either Cys(Mob) or Cys(Acm) groups treated with PySeSePy in trifluoroacetic acid (TFA) (with or without triisopropylsilane (TIS) were converted to Cys‐S–SePy adducts at 37 °C and various incubation times. This novel Cys‐S–SePy adduct is able to be chemoselectively reduced by five‐fold excess ascorbate at pH 4.5, a condition that should spare already installed peptide disulfide bonds from reduction. This chemoselective reduction by ascorbate will undoubtedly find utility in numerous biotechnological applications. We applied our new chemistry to the iodine‐free synthesis of the human intestinal hormone guanylin, which contains two disulfide bonds. While we originally envisioned using ascorbate to chemoselectively reduce one of the formed Cys‐S–SePy adducts to catalyze disulfide bond formation, we found that when pairs of Cys(Acm) residues were treated with PySeSePy in TFA, the second disulfide bond formed spontaneously. Spontaneous formation of the second disulfide is most likely driven by the formation of the thermodynamically favored diselenide (PySeSePy) from the two Cys‐S–SePy adducts. Thus, we have developed a one‐pot method for concomitant deprotection and disulfide bond formation of Cys(Acm) pairs in the presence of an existing disulfide bond.     

Controlled syntheses of natural and disulfide-mispaired regioisomers of alpha-conotoxin SI.

Methods are reported for the unambiguous syntheses of all three possible disulfide regioisomers with the sequence of alpha-conotoxin SI, a tridecapeptide amide from marine cone snail venom that binds selectively to the muscle subtype of nicotinic acetylcholine receptors. The naturally occurring peptide has two 'interlocking' disulfide bridges connecting Cys2-Cys7 and Cys3-Cys13 (2/7&3/13), while in the two mispaired isomers the disulfide bridges connect Cys2-Cys13 and Cys3-Cys7 (2/13 & 3/7, 'nested') and Cys2-Cys3 and Cys7-Cys13 (2/3 & 7/13, 'discrete'), respectively. Alignment of disulfide bridges was controlled at the level of orthogonal protection schemes for the linear precursors, assembled by Fmoc solid-phase peptide synthesis on acidolyzable tris(alkoxy)benzylamide (PAL) supports. Side-chain protection of cysteine was provided by suitable pairwise combination of the S-9H-xanthen-9-yl (Xan) and S-acetamidomethyl (Acm) protecting groups. The first disulfide bridge was formed from the corresponding bis(thiol) precursor obtained by selective deprotection of S-Xan, and the second disulfide bridge was formed by orthogonal co-oxidation of S-Acm groups on the remaining two Cys residues. It was possible to achieve the desired alignments with either order of loop formation (smaller loop before larger, or vice versa). The highest overall yields were obtained when both disulfides were formed in solution, while experiments where either the first or both bridges were formed while the peptide was on the solid support revealed lower overall yields and poorer selectivities towards the desired isomers.     

Three possible disulfides in the acetylcholine receptor alpha-subunit

The cysteinyl residues of the acetylcholine receptor alpha-subunit of Torpedo californica were analyzed. All seven cysteines could be accounted for. Three possible disulfide bridges and one unpaired cysteine were indicated. The disulfide linkages were as follows: Cys128 to Cys142; Cys192 to Cys193; Cys412 to Cys418 (Cys222 is unpaired). The identification of cysteinyl residues was accomplished by a modified protein blot procedure. Cysteinyl residues of intact nicotinic acetylcholine receptor were selectively biotinylated with 3-(N-maleimidopropionyl)biocytin and subsequently detected by the 125I-labeled avidin overlay of blotted Staphylococcus aureus V8 proteolyzed alpha-subunits. Two pairs of cysteines (Cys128/Cys142 and Cys412/Cys418) could be demonstrated only after Na(BH4) reduction of the acetylcholine receptor. Cysteine residues 192 and 193 are particularly sensitive to reduction; 0.1 mM dithiothreitol is sufficient.     

Synthesis of a molt-inhibiting hormone of the American crayfish, Procambarus clarkii, and determination of the location of its disulfide linkages

A molt-inhibiting hormone (Prc-MIH) of the American crayfish, Procambarus clarkii, a member of the type II CHH family, was chemically synthesized and the location of its three disulfide linkages was determined. Prc-MIH consists of 75 amino acid residues and was synthesized by a thioester method. Two peptide segments, Boc-[Cys(Acm)(7,24,27), Lys(Boc)(19)]-Prc-MIH(1-39)-SCH(2)CH(2)CO-Nle-NH(2) and H-[Cys(Acm)(40,44,53), Lys(Boc)(42,51,67)]-Prc-MIH(40-75)-NH(2), were prepared using peptides obtained via the Boc solid-phase method. Condensation of the building blocks in the presence of silver chloride, 3,4-dihydro-3-hydroxy-4-oxo-1,2,3-benzotriazine, and N, N-diisopropylethylamine, followed by removal of the protecting groups, gave the reduced form of Prc-MIH(1-75)-NH(2). This product was converted to the native form of Prc-MIH (synthetic Prc-MIH) in a buffer which contained cysteine and cystine. The synthetic Prc-MIH showed the same behavior by RP-HPLC and biological activity assays as the natural Prc-MIH. The disulfide bond between Cys7 and Cys44 was determined by isolation of a fragment from an enzymatic digest of the synthetic Prc-MIH by RP-HPLC, followed by mass analysis. The disulfide bonds between Cys24 and Cys40 and between Cys27 and Cys53 were determined by comparing the elution position of an enzymatic digest of the synthetic Prc-MIH with authentic chemically synthesized samples, which contained three types of possible disulfide linkages.     

Identification of disulfide bonds among the nine core 2 N-acetylglucosaminyltransferase-M cysteines conserved in the mucin beta6-N-acetylglucosaminyltransferase family

Bovine core 2 beta1,6-N-acetylglucosaminyltransferase-M (bC2GnT-M) catalyzes the formation of all mucin beta1,6-N-acetylglucosaminides, including core 2, core 4, and blood group I structures. These structures expand the complexity of mucin carbohydrate structure and thus the functional potential of mucins. The four known mucin beta1,6-N-acetylglucosaminyltransferases contain nine conserved cysteines. We determined the disulfide bond assignments of these cysteines in [(35)S]cysteine-labeled bC2GnT-M isolated from the serum-free conditioned medium of Chinese hamster ovary cells stably transfected with a pSecTag plasmid. This plasmid contains bC2GnT-M cDNA devoid of the 5'-sequence coding the cytoplasmic tail and transmembrane domain. The C18 reversed phase high performance liquid chromatographic profile of the tryptic peptides of reduced-alkylated (35)S-labeled C2GnT-M was established using microsequencing. Each cystine pair was identified by rechromatography of the C8 high performance liquid chromatographic radiolabeled tryptic peptides of alkylated bC2GnT-M on C18 column. Among the conserved cysteines in bC2GnT-M, the second (Cys(113)) was a free thiol, whereas the other eight cysteines formed four disulfide bridges, which included the first (Cys(73)) and sixth (Cys(230)), third (Cys(164)) and seventh (Cys(384)), fourth (Cys(185)) and fifth (Cys(212)), and eighth (Cys(393)) and ninth (Cys(425)) cysteine residues. This pattern of disulfide bond formation differs from that of mouse C2GnT-L, which may contribute to the difference in substrate specificity between these two enzymes. Molecular modeling using disulfide bond assignments and the fold recognition/threading method to search the Protein Data Bank found a match with aspartate aminotransferase structure. This structure is different from the two major protein folds proposed for glycosyltransferases.     

Simultaneous Post-cysteine(S-Acm) Group Removal Quenching of Iodine and Isolation of Peptide by One Step Ether Precipitation

The S-acetamidomethyl (Acm) protecting group is widely used in the chemical synthesis of peptides that contain one or more disulfide bonds. Treatment of peptides containing S-Acm protecting group with iodine results in simultaneous removal of the sulfhydryl protecting group and disulfide formation. However, the excess iodine needs to be quenched or adsorbed as quickly as possible after completion of the disulfide bond formation in order to minimize side reactions that are often associated with the iodination step. We report a simple method for simultaneous post-cysteine (Acm) group removal quenching of iodination and isolation. Use of large volumes of diethyl ether for direct precipitation action of the oxidized peptide from the 90 or 95% aqueous acetic acid solution affords nearly quantitative recovery of largely iodine-free peptide ready for direct purification. It was successfully applied to the synthesis of various peptides including human insulin-like peptide 3 analogues. Although recovery yields were comparable to the traditionally used ascorbic acid quenching method, this new approach offers significant advantages such as more simple utility, minimal side reactions, and greater cost effectiveness.     

Disulfide structures of highly bridged peptides: a new strategy for analysis.

A new approach is described for analyzing disulfide linkage patterns in peptides containing tightly clustered cystines. Such peptides are very difficult to analyze with traditional strategies, which require that the peptide chain be split between close or adjacent Cys residues. The water-soluble tris-(2-carboxyethyl)-phosphine (TCEP) reduced disulfides at pH 3, and partially reduced peptides were purified by high performance liquid chromatography with minimal thiol-disulfide exchange. Alkylation of free thiols, followed by sequencer analysis, provided explicit assignment of disulfides that had been reduced. Thiol-disulfide exchange occurred during alkylation of some peptides, but correct deductions were still possible. Alkylation competed best with exchange when peptide solution was added with rapid mixing to 2.2 M iodoacetamide. Variants were developed in which up to three alkylating agents were used to label different pairs of thiols, allowing a full assignment in one sequencer analysis. Model peptides used included insulin (three bridges, intra- and interchain disulfides; -Cys.Cys- pair), endothelin and apamin (two disulfides; -Cys.x.Cys- pair), conotoxin GI and isomers (two disulfides; -Cys.Cys- pair), and bacterial enterotoxin (three bridges within 13 residues; two -Cys.Cys- pairs). With insulin, all intermediates in the reduction pathway were identified; with conotoxin GI, analysis was carried out successfully for all three disulfide isomers. In addition to these known structures, the method has been applied successfully to the analysis of several previously unsolved structures of similar complexity. Rates of reduction of disulfide bonds varied widely, but most peptides did not show a strongly preferred route for reduction.     

Convergent solid-phase synthesis of hirudin.

Hirudin variant 1 (HV1), a small protein consisting of 65 amino acids and three disulfide bonds, was synthesized by using Fmoc-based convergent methods on 2-chlorotrityl resin (CLTR). The linear sequence was assembled by the sequential condensation of 7 protected fragments, on the resin-bound 55-65 fragment. The conditions of fragment assembly were carefully studied to determine the most efficient synthetic protocol. Crude reduced [Cys(16, 28)(Acm)]-HV1 thus obtained was easily purified to homogeneity by RP-HPLC. Disulfide bridges were successfully formed by a two-step procedure, involving an oxidative folding step to form Cys(6)-Cys(14) and Cys(22)-Cys(39) linkages, followed by iodine oxidation to form the Cys(16)-Cys(28) bond. The correct disulfide bond alignment was established by peptide mapping using Staphylococcus aureus V8 protease at pH 4.5.     

Cysteine cross-linking defines part of the dimer and B/C domain interface of the Escherichia coli mannitol permease

Part of the dimer and B/C domain interface of the Escherichia coli mannitol permease (EII(mtl)) has been identified by the generation of disulfide bridges in a single-cysteine EII(mtl), with only the activity linked Cys(384) in the B domain, and in a double-cysteine EII(mtl) with cysteines at positions 384 and 124 in the first cytoplasmic loop of the C domain. The disulfide bridges were formed in the enzyme in inside-out membrane vesicles and in the purified enzyme by oxidation with Cu(II)-(1,10-phenanthroline)(3), and they were visualized by SDS-polyacrylamide gel electrophoresis. Discrimination between possible disulfide bridges in the dimeric double-cysteine EII(mtl) was done by partial digestion of the protein and the formation of heterodimers, in which the cysteines were located either on different subunits or on one subunit. The disulfide bridges that were identified are an intersubunit Cys(384)-Cys(384), an intersubunit Cys(124)-Cys(124), an intersubunit Cys(384)-Cys(124), and an intrasubunit Cys(384)-Cys(124). The disulfide bridges between the B and C domain were observed with purified enzyme and confirmed by matrix-assisted laser desorption ionization-time of flight mass spectrometry. Mannitol did not influence the formation of the disulfide between Cys(384) and Cys(124). The close proximity of the two cysteines 124 was further confirmed with a separate C domain by oxidation with Cu(II)-(1,10-phenanthroline)(3) or by reactions with dimaleimides of different length. The data in combination with other work show that the first cytoplasmic loop around residue 124 is located at the dimer interface and involved in the interaction between the B and C domain.     

On‐resin conversion of Cys(Acm)‐containing peptides to their corresponding Cys(Scm) congeners

The Acm protecting group for the thiol functionality of cysteine is removed under conditions (Hg²⁺) that are orthogonal to the acidic milieu used for global deprotection in Fmoc‐based solid‐phase peptide synthesis. This use of a toxic heavy metal for deprotection has limited the usefulness of Acm in peptide synthesis. The Acm group may be converted to the Scm derivative that can then be used as a reactive intermediate for unsymmetrical disulfide formation. It may also be removed by mild reductive conditions to generate unprotected cysteine. Conversion of Cys(Acm)‐containing peptides to their corresponding Cys(Scm) derivatives in solution is often problematic because the sulfenyl chloride reagent used for this conversion may react with the sensitive amino acids tyrosine and tryptophan. In this protocol, we report a method for on‐resin Acm to Scm conversion that allows the preparation of Cys(Scm)‐containing peptides under conditions that do not modify other amino acids. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Stereoselective disulfide formation stabilizes the local peptide conformation in nisin mimics

Nisin is a polymacrocyclic peptide antimicrobial with high activity against Gram-positive bacteria. Lanthionine and methyllanthionine bridges, closing the macrocycles, are stabilized by thioether bonds, formed between cysteines and dehydrated serine or threonine. The role of polypeptide backbone conformation in the formation of macrocycles A and B within cysteine mutants of nisin residues 1?12 is investigated here by molecular dynamics simulations. Enantiomeric combinational space of Cys3 and Cys7 and of Cys8 and Cys11 is examined for the preference of disulfide bond formation over helical turn formation within this region. A clear preference for spontaneous disulfide formation and closure of rings 3,7 and 8,11 is demonstrated for the D-Cys3, D-Cys7, L-Cys8, L-Cys11 nisin homologue, while interlinked rings A and B are obtained through disulfide bridges between L-Cys3 and D-Cys8 and between D-Cys7 and D-Cys11. This study offers a simple designer approach to solid phase synthesis of macrocyclic peptides and lantibiotic analogues.     

Efficient approach to synthesis of two-chain asymmetric cysteine analogs of receptor-binding region of transforming growth factor-alpha.

The putative receptor-binding region of human transforming growth factor-alpha (TGF alpha) has been shown to be contributed by two fragments: an A-chain (residue 12-18) and a 17-residue carboxyl fragment (residue 34-50) that includes a disulfide-containing C-loop (residue 34-43). An approach to the synthesis of two-chain analogs containing an intermolecular disulfide linked A-chain and the 17-residue carboxyl fragment (C-fragment) possessing receptor-binding activity is described. The synthesis was achieved by the solid-phase method using the Boc-benzyl protecting group strategy. The single Cys of the A-chain was activated as a mixed disulfide with 2-thiopyridine to form the intermolecular disulfide bond with Cys41 or Cys46 of the C-fragment on the resin support. Prior to this reaction, the acetamido (Acm) protecting group of Cys41 or Cys46 was removed by Hg(OAc)2 on the resin support. The peptide and side chain protecting groups including the S-methylbenzyl moiety of the Cys34 and Cys43 were concomitantly cleaved by high HF. The intramolecular disulfide with two unprotected Cys was formed in the presence of an intermolecular disulfide. This intramolecular disulfide bond formation was usually not feasible under the traditionally-held scheme at basic pH since disulfide interchange would occur faster than intramolecular oxidation. To prevent the disulfide interchange, a new method was devised. The intramolecular disulfide bond oxidation was mediated by dimethylsulfoxide at an acidic pH, at which the disulfide interchange reaction was suppressed. The desired product was obtained with a 60-70% yield.(ABSTRACT TRUNCATED AT 250 WORDS)     

Importance of the disulfide bridges in the antibacterial activity of human hepcidin

Hepcidin was first identified as an antimicrobial peptide present in human serum and urine. It was later demonstrated that hepcidin is the long sought hormone that regulates iron homeostasis in mammals. The native peptide of 25 amino acids (Hepc25) contains four disulfide bridges that maintain a β-hairpin motif. The aim of the present study was to assess whether the intramolecular disulfide bridges are necessary for Hepc25 antimicrobial activity. We show that a synthetic peptide corresponding to human Hepc25, and which contains the four disulfide bridges, has an antibacterial activity against several strains of Gram-positive and Gram-negative bacteria. On the contrary, a synthetic peptide where all cysteines were replaced by alanines (Hepc25-Ala) had no detectable activity against the same strains of bacteria. In a further step, the mode of action of Hepc25 on Escherichia coli was studied. SYTOX Green uptake was used to assess bacterial membrane integrity. No permeabilization of the membrane was observed with Hepc25, indicating that this peptide does not kill bacteria by destroying their membranes. Gel retardation assay showed that the Hepc25 binds to DNA with high efficiency, and that this binding ability is dependent on the presence of the intramolecular disulfide bridges. Reduction of Hepc25 or replacement of the eight cysteines by alanine residues led to peptides that were no longer able to bind DNA in the in vitro assay. Altogether, these results demonstrate that Hepc25 should adopt a three-dimensional structure stabilized by the intramolecular disulfide bridges in order to have antibacterial activity.     

Hemocyanins in spiders, XX. Sulfhydryl groups and disulfide bridges in subunit d of Eurypelma californicum hemocyanin

Subunit d of Eurypelma californicum hemocyanin contains after reduction 7 cysteine residues. Using 3,3'-dithiobis(6-nitrobenzoic acid) 3 mol cysteine/mol subunit were determined. The cysteine- and cystine-containing peptides of subunit d were obtained by cyanogen bromide cleavage and subsequent treatment with trypsin. The free cysteines were established at positions 102, 261, and 454 respectively. Cys205-Cys210 and Cys529-Cys579 are connected by disulfide bridges.     

The disulfide structure of mouse lysosome-associated membrane protein 1

The disulfide structure of mouse lysosome-associated membrane protein 1 has been determined by reverse-phase isolation and sequence analysis of the cysteine-containing tryptic fragments of the reduced and non-reduced deglycosylated protein. Half-cystines were distinguished (a) by their localization within tryptic or chymotryptic peptides that formed reverse-phase peaks unique to the reduced digests and (b) by their 3H-carboxymethylation only after reduction of the protein. The disulfide arrangement of the cysteines was assigned after isolation of disulfide-linked peptide pairs. Each pair chromatographed as a peak present in the nonreduced (but not the corresponding reduced) tryptic digest. NH2-terminal sequencing as well as reduction, alkylation, and rechromatography of the disulfide-linked fragments led to the following assignment of disulfide bonds: Cys11 and Cys50, Cys125 and Cys161, Cys198 and Cys235, and Cys303 and Cys340. This structure creates four 36-38-residue loops that are symmetrically placed within the two halves of the protein's intraluminal domain. The loops formed by the Cys11-Cys50 and Cys198-Cys235 bridges are homologous, and the Cys125-Cys161 and Cys303-cys340 loops form a second set of homologous domains. The conservation of cysteine residues among lysosome-associated membrane proteins 1 and 2 suggests that this disulfide arrangement is common to both members of this family of lysosomal membrane glycoproteins.     

Disulfide bond polymerization of a cyclic peptide derived from the surface loop 4 of class 1 OMP of Neisseria meningitidis

Summary Two peptides derived from the surface loop 4 of class 1 Outer Membrane Protein (OMP) ofNeisseria meningitidis were synthesized on solid phase using the Boc/Bzl strategy: one containing the entire loop 4 cyclized and the other representing the polymerized cyclic loop 4. To test a more efficient cyclic peptide presentation, in the present study a strategy was developed to obtain polymers of cyclic peptides. In order to obtain the polymeric cyclic peptide, two protecting groups for cysteine were used — Acm and Mob. The Cys(Acm)-protected cyclic peptide was obtained after removing the Mob group. The polymerization reaction was carried out by simultaneous deprotection/oxidation ofS-Acm with iodine. Analysis of the polymeric cyclic peptide in Tris-tricine-SDS-PAGE showed different bands with molecular weights higher than expected for the corresponding monomeric cyclic peptide. Both peptides were used in immunization of four different mouse strains. The antisera raised against the peptides were evaluated by ELISA and Western blotting vs. OMP preparation ofN. meningitidis. The titers raised against the polymerized cyclic peptide were higher than the ones raised against the cyclic peptide. The antisera elicited did not show bactericidal activity. Nevertheless, the antisera elicited against the polymeric cyclic peptide in the CBA/J mouse strain showed opsonic activity. The antibodies raised against the polymeric cyclic peptide were successfully used as probes in Western blotting experiments to verify the display of loop 4 peptide on the surface of filamentous phage M13.     

Determination of disulfide bond assignments and N-glycosylation sites of the human gastrointestinal carcinoma antigen GA733-2 (CO17-1A, EGP, KS1-4, KSA, and Ep-CAM)

The GA733-2 antigen is a cell surface glycoprotein highly expressed on most human gastrointestinal carcinoma and at a lower level on most normal epithelia. It is an unusual cell-cell adhesion protein that does not exhibit any obvious relationship to the four known classes of adhesion molecules. In this study, the disulfide-bonding pattern of the GA733-2 antigen was determined using matrix-assisted laser desorption/ionization mass spectrometry and N-terminal sequencing of purified tryptic peptides treated with 2-[2'-nitrophenylsulfonyl]-3-methyl-3-bromoindolenine or partially reduced and alkylated. Numbering GA733-2 cysteines sequentially from the N terminus, the first three disulfide linkages are Cys1-Cys4, Cys2-Cys6, and Cys3-Cys5, which is a novel pattern for a cysteine-rich domain instead of the expected epidermal growth factor-like disulfide structure. The next three disulfide linkages are Cys7-Cys8, Cys9-Cys10, and Cys11-Cys12, consistent with the recently determined disulfide pattern of the thyroglobulin type 1A domain of insulin-like growth factor-binding proteins 1 and 6. Analysis of glycosylation sites showed that GA733-2 antigen contained N-linked carbohydrate but that no O-linked carbohydrate groups were detected. Of the three potential N-linked glycosylation sites, Asn175 was not glycosylated, whereas Asn88 was completely glycosylated, and Asn51 was partially glycosylated. These data show that the extracellular domain of the GA733-2 antigen consists of three distinct domains; a novel cysteine-rich N-terminal domain (GA733 type 1 motif), a cysteine-rich thyroglobulin type 1A domain (GA733 type 2 motif), and a unique nonglycosylated domain without cysteines (GA733 type 3 motif).     

Disulfide bond structure of the AVR9 elicitor of the fungal tomato pathogen Cladosporium fulvum: evidence for a cystine knot

Disease resistance in plants is commonly activated by the product of an avirulence (Avr) gene of a pathogen after interaction with the product of a matching resistance (R) gene in the host. In susceptible plants, Avr products might function as virulence or pathogenicity factors. The AVR9 elicitor from the fungus Cladosporium fulvum induces defense responses in tomato plants carrying the Cf-9 resistance gene. This 28-residue beta-sheet AVR9 peptide contains three disulfide bridges, which were identified in this study as Cys2-Cys16, Cys6-Cys19, and Cys12-Cys26. For this purpose, AVR9 was partially reduced, and the thiol groups of newly formed cysteines were modified to prevent reactions with disulfides. After HPLC purification, the partially reduced peptides were sequenced to determine the positions of the modified cysteines, which originated from the reduced disulfide bridge(s). All steps involving molecules with free thiol groups were performed at low pH to suppress disulfide scrambling. For that reason, cysteine modification by N-ethylmaleimide was preferred over modification by iodoacetamide. Upon (partial) reduction of native AVR9, the Cys2-Cys16 bridge opened selectively. The resulting molecule was further reduced to two one-bridge intermediates, which were subsequently completely reduced. The (partially) reduced cysteine-modified AVR9 species showed little or no necrosis-inducing activity, demonstrating the importance of the disulfide bridges for biological activity. Based on peptide length and cysteine spacing, it was previously suggested that AVR9 isa cystine-knotted peptide. Now, we have proven that the bridging pattern of AVR9 is indeed identical to that of cystine-knotted peptides. Moreover, NMR data obtained for AVR9 show that it is structurally closely related to the cystine-knotted carboxypeptidase inhibitor. However, AVR9 does not show any carboxypeptidase inhibiting activity, indicating that the cystine-knot fold is a commonly occurring motif with varying biological functions.