Trapping single ions inside single ion channels.

Single Ca++-activated K+ channels from rat muscle plasma membranes are inhibited by Ba++. A single Ba++ entering the channel's conduction pore induces a long-lived blocked state. This study employs Ba++ as a probe of the channel's conduction pathway to show that the channel can be forced to close with a single Ba++ ion inside the pore. A Ba++ ion inside the closed channel is trapped and cannot escape until the channel opens. The results demonstrate that in the channel's closed state, the cytoplasmic side of the conduction pore is obstructed to the passage of ions.     

Effects of barium on the potassium conductance of squid axon

Ba++ ion blocks K+ conductance at concentrations in the nanomolar range. This blockage is time and voltage dependent. From the time dependence it is possible to determine the forward and reverse rate constants for what appears to be an essentially first-order process of Ba++ interaction. The voltage dependence of the rate constants and the dissociation constants place the site of interaction near the middle of the membrane field. Comparison of the efficacy of Ba++ block at various internal K+ concentrations suggests that Ba++ is probably a simple competitive inhibitor of K+ interaction with the K+ conductance. The character of Ba++ block in high external K+ solutions suggests that Ba++ ion may be "knocked-off" the site by inward movement of external K+. Examination of the effects of other divalent cations suggests that the channel may have a closed state with a divalent cation inside the channel. The relative blockage at different temperatures implies a strong interaction between Ba++ and the K+ conductance.     

Multi-ion occupancy alters gating in high-conductance, Ca(2+)-activated K+ channels

In this study, single-channel recordings of high-conductance Ca(2+)-activated K+ channels from rat skeletal muscle inserted into planar lipid bilayer were used to analyze the effects of two ionic blockers, Ba2+ and Na+, on the channel's gating reactions. The gating equilibrium of the Ba(2+)-blocked channel was investigated through the kinetics of the discrete blockade induced by Ba2+ ions. Gating properties of Na(+)-blocked channels could be directly characterized due to the very high rates of Na+ blocking/unblocking reactions. While in the presence of K+ (5 mM) in the external solution Ba2+ is known to stabilize the open state of the blocked channel (Miller, C., R. Latorre, and I. Reisin. 1987. J. Gen. Physiol. 90:427-449), we show that the divalent blocker stabilizes the closed-blocked state if permeant ions are removed from the external solution (K+ less than 10 microM). Ionic substitutions in the outer solution induce changes in the gating equilibrium of the Ba(2+)-blocked channel that are tightly correlated to the inhibition of Ba2+ dissociation by external monovalent cations. In permeant ion-free external solutions, blockade of the channel by internal Na+ induces a shift (around 15 mV) in the open probability--voltage curve toward more depolarized potentials, indicating that Na+ induces a stabilization of the closed-blocked state, as does Ba2+ under the same conditions. A kinetic analysis of the Na(+)-blocked channel indicates that the closed-blocked state is favored mainly by a decrease in opening rate. Addition of 1 mM external K+ completely inhibits the shift in the activation curve without affecting the Na(+)-induced reduction in the apparent single-channel amplitude. The results suggest that in the absence of external permeant ions internal blockers regulate the permeant ion occupancy of a site near the outer end of the channel. Occupancy of this site appears to modulate gating primarily by speeding the rate of channel opening.     

External barium block of Shaker potassium channels: evidence for two binding sites

External barium ions inhibit K+ currents of Xenopus oocytes expressing ShH4 delta 6-46, the non-inactivating deletion of the Shaker K+ channel. At the macroscopic level, Ba2+ block comprises both a fast and a slow component. The fast component is less sensitive to Ba2+ (apparent dissociation constant at 0 mV, K(0), approximately 19.1 mM) than the slow component and is also less voltage dependent (apparent electrical distance, delta, approximately 0.14). The slow component (K(0), approximately 9.4 mM, delta approximately 0.25) is relieved by outward K+ current, which suggests that the corresponding binding site resides within the channel conduction pathway. At the single channel level, the fast component of block is evidenced as an apparent reduction in amplitude, suggesting an extremely rapid blocking and unblocking reaction. In contrast, the slow component appears to be associated with long blocked times that are present from the beginning of a depolarizing command. Installation of the slow component is much slower than a diffusion limited process; for example, the blocking time constant (tau) produced by 2 mM Ba2+ is approximately 159 s (holding potential, HP = -90 mV). However, the blocking rate of this slow component is not a linear function of external Ba2+ and tends to saturate at higher concentrations. This is inconsistent with a simple bi-molecular blocking reaction. These features of external Ba2+ block can be accounted for by a simple model of two sequential Ba2+ binding sites, where the deeper of the two sites produces the slow component of block.     

Charybdotoxin block of single Ca2+-activated K+ channels. Effects of channel gating, voltage, and ionic strength

Charybdotoxin (CTX), a small, basic protein from scorpion venom, strongly inhibits the conduction of K ions through high-conductance, Ca2+-activated K+ channels. The interaction of CTX with Ca2+-activated K+ channels from rat skeletal muscle plasma membranes was studied by inserting single channels into uncharged planar phospholipid bilayers. CTX blocks K+ conduction by binding to the external side of the channel, with an apparent dissociation constant of approximately 10 nM at physiological ionic strength. The dwell-time distributions of both blocked and unblocked states are single-exponential. The toxin association rate varies linearly with the CTX concentration, and the dissociation rate is independent of it. CTX is competent to block both open and closed channels; the association rate is sevenfold faster for the open channel, while the dissociation rate is the same for both channel conformations. Membrane depolarization enhances the CTX dissociation rate e-fold/28 mV; if the channel's open probability is maintained constant as voltage varies, then the toxin association rate is voltage independent. Increasing the external solution ionic strength from 20 to 300 mM (with K+, Na+, or arginine+) reduces the association rate by two orders of magnitude, with little effect on the dissociation rate. We conclude that CTX binding to the Ca2+-activated K+ channel is a bimolecular process, and that the CTX interaction senses both voltage and the channel's conformational state. We further propose that a region of fixed negative charge exists near the channel's CTX-binding site.     

Divalent ion trapping inside potassium channels of human T lymphocytes

Using the patch-clamp whole-cell recording technique, we investigated the influence of external Ca2+, Ba2+, K+, Rb+, and internal Ca2+ on the rate of K+ channel inactivation in the human T lymphocyte-derived cell line, Jurkat E6-1. Raising external Ca2+ or Ba2+, or reducing external K+, accelerated the rate of the K+ current decay during a depolarizing voltage pulse. External Ba2+ also produced a use-dependent block of the K+ channels by entering the open channel and becoming trapped inside. Raising internal Ca2+ accelerated inactivation at lower concentrations than external Ca2+, but increasing the Ca2+ buffering with BAPTA did not affect inactivation. Raising [K+]o or adding Rb+ slowed inactivation by competing with divalent ions. External Rb+ also produced a use-dependent removal of block of K+ channels loaded with Ba2+ or Ca2+. From the removal of this block we found that under normal conditions approximately 25% of the channels were loaded with Ca2+, whereas under conditions with 10 microM internal Ca2+ the proportion of channels loaded with Ca2+ increased to approximately 50%. Removing all the divalent cations from the external and internal solution resulted in the induction of a non-selective, voltage-independent conductance. We conclude that Ca2+ ions from the outside or the inside can bind to a site at the K+ channel and thereby block the channel or accelerate inactivation.     

Gating-dependent mechanism of 4-aminopyridine block in two related potassium channels

4-aminopyridine (4AP) is widely used as a selective blocker of voltage- activated K+ currents in excitable membranes, but its mechanism and site of action at the molecular level are not well understood. To address this problem we have analyzed 4AP block in Kv2.1 and Kv3.1, mammalian representatives of the Drosophila Shab and Shaw subfamilies of voltage-gated K+ channels, respectively. The two channels were expressed in Xenopus oocytes and analyzed at both the macroscopic and single channel levels. Whole cell analysis showed that 4AP sensitivity of Kv3.1 was approximately 150 times greater than that of Kv2.1. Patch clamp analysis revealed that the mechanism of 4AP block in both channels was qualitatively similar. 4AP reached its blocking site via the cytoplasmic side of the channels, the ON rate for block was strongly accelerated when channels opened and the drug was trapped in closed channels. Single channel analysis showed that 4AP decreased burst duration and increased the latency-to-first-opening. These effects were found to be related, respectively to drug ON and OFF rates in the activated channel. Kv3.1's high 4AP sensitivity relative to Kv2.1 was associated with both a slower OFF rate and therefore increased stability of the blocked state, as well as a faster ON rate and therefore increased access to the binding site. Our results indicate that in both channels 4AP enters the intracellular mouth to bind to a site that is guarded by the gating mechanism. Differences in channel gating as well as differences in the structure of the intracellular mouth may be important for specifying the 4AP sensitivity in related voltage-gated K+ channels.     

Two barium binding sites on a maxi K+ channel from human vas deferens epithelial cells.

Using the patch clamp technique, we have investigated the blockade of maxi-K+ channels present on vas deferens epithelial cells by extracellular Ba2+. With symmetrical 140 mM K+ solutions, Ba2+ produced discrete blocking events consisting of both long closings of seconds duration (slow block) and fast closings of milliseconds duration (flickering block). Kinetic analysis showed that flickering block occurred according to an "open channel blocking" scheme and was eliminated by reducing external K+ to 4.5 mM. Slow block showed a complex voltage-dependence. At potentials between -20 mV and 20 mV, blockade was voltage-dependent; at potentials greater than 20 mV, blockade was voltage-independent, but markedly sensitive to the extracellular K+ concentration. These data reveal that the vas deferens maxi-K+ channel has two Ba2+ binding sites accessible from the extracellular side. Site one is located at the cytoplasmic side of the gating region and binding to this site causes flickering block. Site two is located close to the extracellular mouth of the channel and binding to this site causes slow block.     

Potassium channel block by internal calcium and strontium

We show that intracellular Ca blocks current flow through open K channels in squid giant fiber lobe neurons. The block has similarities to internal Sr block of K channels in squid axons, which we have reexamined. Both ions must cross a high energy barrier to enter the blocking site from the inside, and block occurs only with millimolar concentrations and with strong depolarization. With Sr (axon) or Ca (neuron) inside, IK is normal in time course for voltages less than about +50 mV; but for large steps, above +90 mV, there is a rapid time-dependent block or "inactivation." From roughly +70 to +90 mV (depending on concentration) the current has a complex time course that may be related to K accumulation near the membrane's outer surface. Block can be deepened by either increasing the concentration or the voltage. Electrical distance measurements suggest that the blocking ion moves to a site deep in the channel, possibly near the outer end. Block by internal Ca can be prevented by putting 10 mM Rb in the external solution. Recovery from block after a strong depolarization occurs quickly at +30 mV, with a time course that is about the same as that of normal K channel activation at this voltage. 20 mM Mg in neurons had no discernible blocking effect. The experiments raise questions regarding the relation of block to normal channel gating. It is speculated that when the channel is normally closed, the "blocking" site is occupied by a Ca ion that comes from the external medium.     

Inward rectifier K+-channel kinetics from analysis of the complex conductance of Aplysia neuronal membrane.

Conduction in inward rectifier, K+-channels in Aplysia neuron and Ba++ blockade of these channels were studied by rapid measurement of the membrane complex admittance in the frequency range 0.05 to 200 Hz during voltage clamps to membrane potentials in the range -90 to -40 mV. Complex ionic conductances of K+ and Cl- rectifiers were extracted from complex admittances of other membrane conduction processes and capacitance by vector subtraction of the membrane complex admittance during suppressed inward K+ current (near zero-mean current and in zero [K+]0) from complex admittances determined at other [K+]0 and membrane potentials. The contribution of the K+ rectifier to the admittance is distinguishable in the frequency domain above 1 Hz from the contribution of the Cl- rectifier, which is only apparent at frequencies less than 0.1 Hz. The voltage dependence (-90 to -40 mV) of the chord conductance (0.2 to 0.05 microS) and the relaxation time (4-8 ms) of K+ rectifier channels at [K+]0 = 40 mM were determined by curve fits of admittance data by a membrane admittance model based on the linearized Hodgkin-Huxley equations. The conductance of inward rectifier, K+ channels at a membrane potential of -80 mV had a square-root dependence on external K+ concentration, and the relaxation time increased from 2 to 7.5 ms for [K+]0 = 20 and 100 mM, respectively. The complex conductance of the inward K+ rectifier, affected by Ba++, was obtained by complex vector subtraction of the membrane admittance during blockage of inward rectifier, K+ channels (at -35 mV and [Ba++]0 = 5 mM) from admittances determined at -80 mV and at other Ba++ concentrations. The relaxation time of the blockade process decreased with increases in Ba++ concentration. An open-closed channel state model produces the inductive-like kinetic behavior in the complex conductance of inward rectifier, K+ channels and the addition of a blocked channel state accounts for the capacitive-like kinetic behavior of the Ba++ blockade process.     

Block of squid axon K channels by internally and externally applied barium ions

We have studied the interactions of Ba ion with K channels. Ba2+ blocks these channels when applied either internally or externally in millimolar concentrations. Periodic depolarizations enhance block with internal Ba2+, but diminish the block caused by external Ba2+. At rest, dissociation of Ba2+ from blocked channels is very slow, as ascertained by infrequent test pulses applied after washing Ba2+ form either inside or outside. The time constant for recovery from internal and external Ba2+ is the same. Frequent pulsing greatly shortens recovery time constant after washing away both Ba2+in and Ba2+out. Block by Ba2+ applied internally or externally is voltage dependent. Internal Ba2+ block behaves like a one-step reaction governed by a dissociation constant (Kd) that decreases e-fold/12 mV increase of pulse voltage: block deepens with more positive pulse voltage. For external Ba2+, Kd decreases e-fold/18 mV as holding potential is made more negative: block deepens with increasing negativity. Millimolar external concentrations of some cations can either lessen (K+) or enhance (NH+4, Cs+) block by external Ba2+. NH+4 apparently enhances block by slowing exist of Ba ions from the channels. Rb+ and Cs+ also slow clearing of Ba ions from channels. We think that (a) internally applied Ba2+ moves all the way through the channels, entering only when activation gates are open; (b) externally applied Ba2+ moves two-thirds of the way in, entering predominantly when activation gates are closed; (c) at a given voltage, Ba2+ occupies the same position in the channels whether it entered from inside or outside.     

Blockade of current through single calcium channels by Cd2+, Mg2+, and Ca2+. Voltage and concentration dependence of calcium entry into the pore

We studied the blocking actions of external Ca2+, Mg2+, Ca2+, and other multivalent ions on single Ca channel currents in cell-attached patch recordings from guinea pig ventricular cells. External Cd or Mg ions chopped long-lasting unitary Ba currents promoted by the Ca agonist Bay K 8644 into bursts of brief openings. The bursts appear to arise from discrete blocking and unblocking transitions. A simple reaction between a blocking ion and an open channel was suggested by the kinetics of the bursts: open and closed times within a burst were exponentially distributed, the blocking rate varied linearly with the concentration of blocking ion, and the unblocking rate was more or less independent of the blocker concentration. Other kinetic features suggested that both Cd2+ and Mg2+ lodge within the pore. The unblocking rate was speeded by membrane hyperpolarization or by raising the Ba concentration, as if blocking ions were swept into the myoplasm by the applied electric field or by repulsive interaction with Ba2+. Ca ions reduced the amplitude of unitary Ba currents (50% inhibition at approximately 10 mM [Ca]o with 50 mM [Ba]o) without detectable flicker, presumably because Ca ions exit the pore very rapidly following Ba entry. However, Ca2+ entry and exit rates could be resolved when micromolar Ca blocked unitary Li+ fluxes through the Ca channel. The blocking rate was essentially voltage independent, but varied linearly with Ca concentration (rate coefficient, 4.5 X 10(8) M-1s-1); evidently, the initial Ca2+-pore interaction is outside the membrane field and much faster than the overall process of Ca ion transfer. The unblocking rate did not vary with [Ca]o, but increased steeply with membrane hyperpolarization, as if blocking Ca ions were driven into the cell. We suggest that Ca is both an effective permeator and a potent blocker because it dehydrates rapidly (unlike Mg2+) and binds to the pore with appropriate affinity (unlike Cd2+). There appears to be no sharp dichotomy between "permeators" and "blockers," only quantitative differences in how quickly ions enter and leave the pore.     

A novel type of internal barium block of a maxi-K+ channel from human vas deferens epithelial cells.

We have recently shown that a maxi-K+ channel from vas deferens epithelial cells contains two Ba2+-binding sites accessible from the external side: a "flickering" site located deep in the channel pore and a "slow" site located close to the extracellular mouth of the channel. Using the patch-clamp technique, we have now studied the effect of internal Ba2+ on this channel. Cytoplasmic Ba2+ produced a voltage- and concentration-dependent "slow" type of block with a dissociation constant of approximately 100 microM. However, based on its voltage dependence and sensitivity to K+ concentration, this block was clearly different from the external "slow" Ba2+ block previously described. Kinetic analysis also revealed a novel "fast flickering" block restricted to channel bursts, with an unblocking rate of approximately 310 s(-1), some 10-fold faster than the external "flickering" block. Taken together, these results show that this channel contains multiple Ba2+-binding sites within the conduction pore. We have incorporated this information into a new model of Ba2+ block, a novel feature of which is that internal "slow" block results from the binding of at least two Ba2+ ions. Our results suggest that current models for Ba2+ block of maxi-K+ channels need to be revised.     

Block of neuronal chloride channels by tetraethylammonium ion derivatives

The block by the symmetric tetraethylammonium (TEA) ion derivatives tetrapropylammonium (TPrA), tetrabutylammonium (TBA), and tetrapentylammonium (TPeA) ions of fast chloride channels in acutely dissociated rat cortical neurons was studied with the excised inside- out configuration of the patch-clamp technique. When applied to the intracellular membrane surface, all three of the quaternary ammonium compounds (QAs) induced the appearance of short-lived closed states in a manner consistent with a blocking mechanism where the blocker preferentially binds to the open kinetic state and completely blocks ion current through the channel. The drug must leave the channel before the channel can return to a closed state. The mechanism of block was studied using one-dimensional dwell-time analysis. Kinetic models were fit to distributions of open and closed interval durations using the Q- matrix approach. The blocking rate constants for all three of the QAs were similar with values of approximately 12-20 x 10(6) M-1s-1. The unblocking rates were dependent on the size or hydrophobicity of the QA with the smallest derivative, TPrA, inducing a blocked state with a mean lifetime of approximately 90 microseconds, while the most hydrophobic derivative, TPeA, induced a blocked state with a mean lifetime of approximately 1 ms. Thus, it appears as though quaternary ammonium ion block of these chloride channels is nearly identical to the block of many potassium channels by these compounds. This suggests that there must be structural similarities in the conduction pathway between anion and cation permeable channels.     

The dihydropyridine-sensitive calcium channel subtype in cone photoreceptors

High-voltage activated Ca channels in tiger salamander cone photoreceptors were studied with nystatin-permeabilized patch recordings in 3 mM Ca2+ and 10 mM Ba2+. The majority of Ca channel current was dihydropyridine sensitive, suggesting a preponderance of L- type Ca channels. However, voltage-dependent, incomplete block (maximum 60%) by nifedipine (0.1-100 microM) was evident in recordings of cones in tissue slice. In isolated cones, where the block was more potent, nifedipine (0.1-10 microM) or nisoldipine (0.5-5 microM) still failed to eliminate completely the Ca channel current. Nisoldipine was equally effective in blocking Ca channel current elicited in the presence of 10 mM Ba2+ (76% block) or 3 mM Ca2+ (88% block). 15% of the Ba2+ current was reversibly blocked by omega-conotoxin GVIA (1 microM). After enhancement with 1 microM Bay K 8644, omega-conotoxin GVIA blocked a greater proportion (22%) of Ba2+ current than in control. After achieving partial block of the Ba2+ current with nifedipine, concomitant application of omega-conotoxin GVIA produced no further block. The P-type Ca channel blocker, omega-agatoxin IVA (200 nM), had variable and insignificant effects. The current persisting in the presence of these blockers could be eliminated with Cd2+ (100 microM). These results indicate that photoreceptors express an L-type Ca channel having a distinguishing pharmacological profile similar to the alpha 1D Ca channel subtype. The presence of additional Ca channel subtypes, resistant to the widely used L-, N-, and P-type Ca channel blockers, cannot, however, be ruled out.     

Block of CaV1.2 channels by Gd3+ reveals preopening transitions in the selectivity filter

Using the lanthanide gadolinium (Gd(3+)) as a Ca(2+) replacing probe, we investigated the voltage dependence of pore blockage of Ca(V)1.2 channels. Gd(+3) reduces peak currents (tonic block) and accelerates decay of ionic current during depolarization (use-dependent block). Because diffusion of Gd(3+) at concentrations used (<1 microM) is much slower than activation of the channel, the tonic effect is likely to be due to the blockage that occurred in closed channels before depolarization. We found that the dose-response curves for the two blocking effects of Gd(3+) shifted in parallel for Ba(2+), Sr(2+), and Ca(2+) currents through the wild-type channel, and for Ca(2+) currents through the selectivity filter mutation EEQE that lowers the blocking potency of Gd(3+). The correlation indicates that Gd(3+) binding to the same site causes both tonic and use-dependent blocking effects. The apparent on-rate for the tonic block increases with the prepulse voltage in the range -60 to -45 mV, where significant gating current but no ionic current occurs. When plotted together against voltage, the on-rates of tonic block (-100 to -45 mV) and of use-dependent block (-40 to 40 mV) fall on a single sigmoid that parallels the voltage dependence of the gating charge. The on-rate of tonic block by Gd(3+) decreases with concentration of Ba(2+), indicating that the apparent affinity of the site to permeant ions is about 1 mM in closed channels. Therefore, we propose that at submicromolar concentrations, Gd(3+) binds at the entry to the selectivity locus and that the affinity of the site for permeant ions decreases during preopening transitions of the channel.     

Interaction of barium ions with potassium channels in squid giant axons.

Blocking of potassium channels by internally and externally applied barium ions has been studied in squid giant axons. Internal Ba (3-5 mM) causes rapid decay or "inactivation" of potassium current (IK). The kinetics and degree of block are strongly voltage-dependent. Large positive voltages speed blocking and make it more profound. Raising the external potassium concentration (Ko) from 0 to 250 mM has the opposite effect: block is made slower and less severe. In contrast, for positive voltages block by the tetraethylammonium derivative 3-phenylpropyltriethylammonium ion is almost independent of Ko and voltage. Recovery from block by internal Ba has a rapid phase lasting a few milliseconds and a slow phase lasting approximately 5 min. Internal Ba causes a "hook" in the IK tails recorded on repolarizing the fiber in high potassium external medium. External Ba, on the other hand, blocks without much altering IK time-course. KD (the dissociation constant) for block by external Ba is a few millimolar, and depends on the internal potassium concentration, the holding potential, and other factors. A reaction scheme for Ba and K channels is presented, postulating that internal and external Ba reach the same point in the channel. Once there, Ba blocks and also stabilizes the closed conformation of the channel. The extreme stability of the Ba channel complex implies the existence of negative charge within the channel.     

Voltage-dependent block of fast chloride channels from rat cortical neurons by external tetraethylammonium ion

Tetraethylammonium ion (TEA) and its longer chain derivatives have been used extensively to block currents through K-selective ion channels. Substantial information has been gained about the structure and gating mechanisms of K and other cation channels from the analysis of the blocking interactions of TEA and other quaternary ammonium ions. We now present an analysis of blocking interactions between single Cl-selective ion channels from acutely dissociated rat cortical neurons and externally applied TEA. TEA applied to the extracellular membrane surface (TEAo) blocked Cl channels in a voltage-dependent manner, with hyperpolarizing potentials favoring block. The voltage dependence of block could be adequately fit assuming that TEA enters the channel pore and binds to a site located approximately 28% of the way through the membrane electrical field. The dose-response relationship between fractional current and [TEA]o at a fixed holding potential of -40 mV was well fit to a simple model with two blocking sites with dissociation constants (Kd) of approximately 2 and 70 mM. The dose-response relationship could also be fit by a mechanism where TEA only partially blocks the channels. At the bandwidth used in these experiments (1-2 kHz), both the mean open duration (composed of the open and blocked durations) and burst duration (composed of open, blocked, and short lifetime shut durations) increased with increased [TEA]o. This is expected if TEAo can bind and unbind only when the channel is in the open kinetic state. These results suggest that the structure of the permeability pathway of these anion-selective channels may be very similar to that of other channels that are blocked by TEA. Additionally, these results caution that a blocking effect by TEA cannot, by itself, be used as sufficient evidence for implicating the participation of K channels in a particular process.     

Extracellular Ba2+ and voltage interact to gate Ca2+ channels at the plasma membrane of stomatal guard cells

Ca2+ channels at the plasma membrane of stomatal guard cells contribute to increases in cytosolic free [Ca2+] ([Ca2+](i)) that regulate K+ and Cl- channels for stomatal closure in higher-plant leaves. Under voltage clamp, the initial rate of increase in [Ca2+](i) in guard cells is sensitive to the extracellular divalent concentration, suggesting a close interaction between the permeant ion and channel gating. To test this idea, we recorded single-channel currents across the Vicia guard cell plasma membrane using Ba2+ as a charge carrying ion. Unlike other Ca2+ channels characterised to date, these channels activate at hyperpolarising voltages. We found that the open probability (P(o)) increased strongly with external Ba2+ concentration, consistent with a 4-fold cooperative action of Ba2+ in which its binding promoted channel opening in the steady state. Dwell time analyses indicated the presence of a single open state and at least three closed states of the channel, and showed that both hyperpolarising voltage and external Ba2+ concentration prolonged channel residence in the open state. Remarkably, increasing Ba2+ concentration also enhanced the sensitivity of the open channel to membrane voltage. We propose that Ba2+ binds at external sites distinct from the permeation pathway and that divalent binding directly influences the voltage gate.     

Calcium-activated potassium channels in resting and activated human T lymphocytes. Expression levels, calcium dependence, ion selectivity, and pharmacology

Ca(2+)-activated K+[K(Ca)] channels in resting and activated human peripheral blood T lymphocytes were characterized using simultaneous patch-clamp recording and fura-2 monitoring of cytosolic Ca2+ concentration, [Ca2+]i. Whole-cell experiments, using EGTA-buffered pipette solutions to raise [Ca2+]i to 1 microM, revealed a 25-fold increase in the number of conducting K(Ca) channels per cell, from an average of 20 in resting T cells to > 500 channels per cell in T cell blasts after mitogenic activation. The opening of K(Ca) channels in both whole-cell and inside-out patch experiments was highly sensitive to [Ca2+]i (Hill coefficient of 4, with a midpoint of approximately 300 nM). At optimal [Ca2+]i, the open probability of a K(Ca) channel was 0.3-0.5. K(Ca) channels showed little or no voltage dependence from - 100 to 0 mV. Single-channel I-V curves were linear with a unitary conductance of 11 pS in normal Ringer and exhibited modest inward rectification with a unitary conductance of approximately 35 pS in symmetrical 160 mM K+. Permeability ratios, relative to K+, determined from reversal potential measurements were: K+ (1.0) > Rb+ (0.96) > NH4+ (0.17) > Cs+ (0.07). Slope conductance ratios were: NH4+ (1.2) > K+ (1.0) > Rb+ (0.6) > Cs+ (0.10). Extracellular Cs+ or Ba2+ each induced voltage-dependent block of K(Ca) channels, with block increasing at hyperpolarizing potentials in a manner suggesting a site of block 75% across the membrane field from the outside. K(Ca) channels were blocked by tetraethylammonium (TEA) applied externally (Kd = 40 mM), but were unaffected by 10 mM TEA applied inside by pipette perfusion. K(Ca) channels were blocked by charybdotoxin (CTX) with a half-blocking dose of 3-4 nM, but were resistant to block by noxiustoxin (NTX) at 1-100 nM. Unlike K(Ca) channels in Jurkat T cells, the K(Ca) channels of normal resting or activated T cells were not blocked by apamin. We conclude that while K(Ca) and voltage-gated K+ channels in the same cells share similarities in ion permeation, Cs+ and Ba2+ block, and sensitivity to CTX, the underlying proteins differ in structural characteristics that determine channel gating and block by NTX and TEA.