Buckling analysis of defective cross-linked functionalized single- and double-walled carbon nanotubes with polyethylene chains using molecular dynamics simulations

Functionalized carbon nanotubes (CNTs) can be used for improving the mechanical properties and load transfer in nanocomposites. In this research, the buckling behavior of perfect and defective cross-linked functionalized CNTs with polyethylene (PE) chains is studied employing molecular dynamics (MD) simulations. Two different configurations with the consideration of vacancy defects, namely mapped and wrapped, are selected. According to the results, critical buckling force of cross-linked functionalized CNTs with PE chains increases as compared to pure CNTs, especially in the case of double-walled carbon nanotubes (DWCNTs). By contrast, it is demonstrated that critical strain of cross-linked functionalized CNTs decreases as compared to that of pristine CNTs. Also, it is observed that increasing the weight percentage leads to the higher increase and the decrease in critical buckling force and strain of cross-linked functionalized CNTs, respectively. Moreover, the presence of defect considerably reduces both critical buckling force and strain of cross-linked functionalized CNTs. Finally, it is shown that the critical buckling strain is more sensitive to the presence of defects as compared to critical buckling force.     

Effects of single and multi walled carbon nanotubes on macrophages: cyto and genotoxicity and electron microscopy

Production of nanotechnology-based materials is increasing worldwide: it is essential to evaluate their potential toxicity. Among these nanomaterials, carbon nanotubes (CNTs) have tremendous potential in many areas of research and applications. We have investigated the cyto- and genotoxic effects of single and multi-walled CNTs (SWCNTs, MWCNTs) and carbon black (CB) on the mouse macrophage cell line RAW 264.7. Specifically we have investigated inflammatory response, release of tumor necrosis factor-α (TNF-α), intracellular reactive oxygen species (ROS) production, cell death (both necrosis and apoptosis), chromosomal aberrations and cellular ultrastructural alteration caused by CB, MWCNTs and SWCNTs. Our data confirm that both CNTs and CB are cyto and geno-toxic to RAW 264.7 mouse macrophages. CNTs exposure induced ROS release, necrosis and chromosomal aberrations but did not cause an inflammatory response. In addition CNTs induce ultrastructural damage and apoptosis. CNTs penetrate the cell membrane and individual MWCNTs are seen associated with the nuclear envelope.     

On the vibrational behavior of single- and double-walled carbon nanotubes under the physical adsorption of biomolecules in the aqueous environment: a molecular dynamics study

The adsorption of biomolecules on the walls of carbon nanotubes (CNTs) in an aqueous environment is of great importance in the field of nanobiotechnology. In this study, molecular dynamics (MD) simulations were performed to understand the mechanical vibrational behavior of single- and double-walled carbon nanotubes (SWCNTs and DWCNTs) under the physical adsorption of four important biomolecules (L-alanine, guanine, thymine, and uracil) in vacuum and an aqueous environment. It was observed that the natural frequencies of these CNTs in vacuum reduce under the physical adsorption of biomolecules. In the aqueous environment, the natural frequency of each pure CNT decreased as compared to its natural frequency in vacuum. It was also found that the frequency shift for functionalized CNTs as compared to pure CNTs in the aqueous environment was dependent on the radius and the number of walls of the CNT, and could be positive or negative.     

Molecular dynamics analysis on tensile properties of carbon nanotubes with different cracks

Molecular dynamics simulation is employed for the axial tension of single-walled carbon nanotubes (SWCNTs) with different cracks. The cracks of SWCNTs in this study actually are the crack-like defects. AIREBO potential is used to simulate the interactions among carbon atoms. The effects of the crack length, temperature, strain rate and tube diameter on the mechanical properties of SWCNTs are studied. It is found that the failure stress and failure strain decrease with the increase of crack length. And the results show that the failure stress and failure strain are related to the applied strain rate and affected by temperature especially by lower temperature. It is also revealed that the failure stress increases with the increase in tube diameter. The deformation behaviours of SWCNTs are also obtained.     

Colloidal stability of carbon nanotubes in an aqueous dispersion of phospholipid

Within the family of nanomaterials, carbon nanotubes (CNTs) have emerged as a new efficient scaffold for studying molecular interactions at interfaces. Poor dispersability of CNTs in any solvent presents a considerable drawback for the development of novel functional composite structures. Previous studies have demonstrated that the solubility of CNTs can be greatly enhanced by employing appropriate surfactants, some of them being biological molecules. In this work, we study the noncovalent wrapping of lipid chains onto the graphitic surface of single-walled material (SWCNTs) by electron microscopy and Raman spectroscopy. Stable and homogenous aqueous suspensions of SWCNTs in the presence of lipids have been prepared, whereas their electrophoretic mobility was confirmed by zeta-potential measurements. Raman measurements revealed that smaller diameter SWCNTs are preferentially dispersed by lipid molecules in the aqueous supernatant part of the prepared suspension.     

Short-Term Response of Soil Enzyme Activity and Soil Respiration to Repeated Carbon Nanotubes Exposure

Nanomaterials such as single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) may repeatedly enter the soil environment with unknown adverse consequences. To provide the information on the effects of repeated exposure of CNTs, we determined the response of soil enzyme activity and soil basal respiration (SBR) through a two-week incubation of farmland soil repeatedly treated with different concentrations of CNTs (100, 200, 500 mg kg^?1 for SWCNTs and 100, 500, 1000 mg Kg^?1 for MWCNTs). The activities of catalase, alkaline phosphatase, and invertase and SBR were measured after one- and two-time treatments. The repeated contamination of SWCNTs and MWCNTs repressed the activity of alkaline phosphatase and invertase in the 14-day incubation. Alkaline phosphatase and invertase were more sensitive indicators of CNTs’ contamination than catalase and soil basal respiration. High concentration of the SWCNTs stimulated SBR while the lower concentration suppressed SBR. The recurred exposure of SWCNTs and MWCNTs repressed the activity of catalase and invertase. The obtained results indicated that the soil microorganisms were suppressed under repeated pollution, as suggested by the same suppressed response of SBR between SWCNTs and MWCNTs treatment, except for the concentration of 500 mg kg^?1.     

A rapid assay for assessment of sphingosine kinase inhibitors and substrates

The effect of incorporating carbon nanotubes (CNTs) in the gel matrix on the electrophoretic mobility of proteins based on their molecular weight differences was investigated using sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS–PAGE). More specifically, a reduction in standard deviation in the molecular weight calibration plots by 55% in the case of multiwalled carbon nanotubes (MWCNTs) and by 34% in the case of single-walled carbon nanotubes (SWCNTs) compared with that of pristine polyacrylamide gels was achieved after incorporating an insignificant amount of functionalized CNTs into the gel matrix. A mechanism based on a more uniform pore size distribution in CNT modified polyacrylamide gel matrix is proposed. Furthermore, the impact of SWCNTs and MWCNTs on the mobility of proteins in different molecular weight regimes at a given acrylamide concentration offers a tunable gel matrix in terms of the selection of molecular weight ranges of proteins. The robustness and excellent reproducibility of the CNT–PAGE protocol are expected to have a significant impact on the molecular weight determination of newly isolated proteins.     

Bending elastic modulus of red blood cell membrane derived from buckling instability in micropipet aspiration tests.

Observation of cell membrane buckling and cell folding in micropipette aspiration experiments was used to evaluate the bending rigidity of the red blood cell membrane. The suction pressure required to buckle the membrane surface initially was found to be about one-half to two-thirds of the pressure that caused the cell to fold and move up the pipet. A simple analytical model for buckling of a membrane disk supported at inner and outer radii correlates well with the observed buckling pressures vs. pipet radii. The buckling pressure is predicted to increase in inverse proportion to the cube of the pipet radius; also, the buckling pressure depends inversely on the radial distance to the toroidal rim of the cell, normalized by the pipet radius. As such, the pressure required to buckle the membrane with 1 X 10(-4) cm diam pipet would be about four times greater than with a 2 X 10(-4) cm pipet. This is the behavior observed experimentally. Based on analysis of the observed buckling data, the membrane bending or curvature elastic modulus is calculated to be 1.8 X 10(-12) dyn-cm.     

Biosafety of non-surface modified carbon nanocapsules as a potential alternative to carbon nanotubes for drug delivery purposes

Background

Carbon nanotubes (CNTs) have found wide success in circuitry, photovoltaics, and other applications. In contrast, several hurdles exist in using CNTs towards applications in drug delivery. Raw, non-modified CNTs are widely known for their toxicity. As such, many have attempted to reduce CNT toxicity for intravenous drug delivery purposes by post-process surface modification. Alternatively, a novel sphere-like carbon nanocapsule (CNC) developed by the arc-discharge method holds similar electric and thermal conductivities, as well as high strength. This study investigated the systemic toxicity and biocompatibility of different non-surface modified carbon nanomaterials in mice, including multi-walled carbon nanotubes (MWCNTs), single-walled carbon nanotubes (SWCNTs), carbon nanocapsules (CNCs), and C₆₀ fullerene (C₆₀). The retention of the nanomaterials and systemic effects after intravenous injections were studied.

Methodology and Principal Findings

MWCNTs, SWCNTs, CNCs, and C₆₀ were injected intravenously into FVB mice and then sacrificed for tissue section examination. Inflammatory cytokine levels were evaluated with ELISA. Mice receiving injection of MWCNTs or SWCNTs at 50 µg/g b.w. died while C₆₀ injected group survived at a 50% rate. Surprisingly, mortality rate of mice injected with CNCs was only at 10%. Tissue sections revealed that most carbon nanomaterials retained in the lung. Furthermore, serum and lung-tissue cytokine levels did not reveal any inflammatory response compared to those in mice receiving normal saline injection.

Conclusion

Carbon nanocapsules are more biocompatible than other carbon nanomaterials and are more suitable for intravenous drug delivery. These results indicate potential biomedical use of non-surface modified carbon allotrope. Additionally, functionalization of the carbon nanocapsules could further enhance dispersion and biocompatibility for intravenous injection.     

Aqueous suspension of carbon nanotubes enhances the specificity of long PCR

DNA manipulation technology is facing more challenges in the postgenomics era. More and more nanomaterials have been investigated for their potential implications in developing better gene technology. In this study, we reported the beneficial effect of single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) in enhancing the specificity and total efficiency of long (14 kb) PCR. Hydroxylic and carboxylic carbon nanotubes (CNTs) had similar enhancing effects. Nanotubes could become another component for improvements in the amplification of long DNA.     

Single-walled carbon nanotubes induce cytotoxicity and DNA damage via reactive oxygen species in human hepatocarcinoma cells

Carbon nanotubes (CNTs) are gradually used in various areas including drug delivery, nanomedicine, biosensors, and electronics. The current study aimed to explore the DNA damage and cytotoxicity due to single-walled carbon nanotubes (SWCNTs) on human hepatocarcinoma cells (HepG2). Cellular proliferative assay showed the SWCNTs to exhibit a significant cell death in a dose- and time-dependent manner. However, SWCNTs induced significant intracellular reactive oxygen species (ROS) production and elevated lipid peroxidation, catalase, and superoxide dismutase in the HepG2 cells. SWCNTs also induced significant decrease in GSH and increase caspase-3 activity in HepG2 cells. DNA fragmentation analysis using the alkaline single-cell gel electrophoresis showed that the SWCNTs cause genotoxicity in a dose- and time-dependent manner. Therefore, the study points towards the capability of the SWCNTs to induce oxidative stress resulting cytotoxicity and genomic instability. This study warrants more careful assessment of SWCNTs before their industrial applications.     

单壁碳纳米管载锦鲤疱疹病毒ORF149核酸疫苗的构建

为了开发新型高效疫苗预防锦鲤疱疹病毒病,以单壁碳纳米管(SWCNT)作为运输载体,构建锦鲤疱疹病毒(KHV)ORF149核酸疫苗。首先构建pcDNA3.1(+)-ORF149重组质粒,通过瞬时转染和免疫印迹分析确定其表达情况,然后通过1,3-偶极环加成反应法将重组质粒与SWCNTs进行偶联,最后通过扫描电镜观察和核酸电泳鉴定其偶联是否成功。结果表明,构建的重组质粒转染细胞后经免疫印迹分析和间接免疫荧光试验均能检测到特异性信号;在核酸琼脂糖凝胶电泳中,构建的重组疫苗电泳条带消失;在场发射扫描电镜观察下,与重组质粒进行偶联的SWCNTs和空白SWCNTs形态差异明显。     

Density functional investigation of hydrogen gas adsorption on Fe?doped pristine and Stone?Wales defected single?walled carbon nanotubes

The adsorptions of hydrogen molecule of the Fe?-?doped pristine and Stone?-?Wales defected armchair (5,5) single?-?walled carbon nanotubes (SWCNTs) compared with the pristine SWCNT were investigated by using the density functional theory at the B3LYP/LanL2DZ level. The doping of Fe atom into SWCNTs occurring via an exothermic process was found. The adsorptions of hydrogen molecule on the Fe?-?doped structures of either perfect or SW defected SWCNTs are stronger than on their corresponding undoped structures. The structural and electronic properties of the pristine and SW defected SWCNTs, their Fe?-?doped structures and their hydrogen molecule adsorptions are reported.     

Improved blood biocompatibility of composite film of chitosan/carbon nanotubes complex

Single-walled carbon nanotubes are novel molecular-scale wires having excellent anti-adhesion properties with regard to platelets. On the other hand, chitosan is a partially de-acetylated derivative of chitin that has a critical role in cell attachment and growth. The aim of this study was to investigate how carbon nanotubes improve the blood biocompatibility of chitosan film. We prepared composite films with various concentrations of chitosan/carbon nanotubes (CS/CNTs) (1.3–6.3 wt%). The sample surfaces were characterized by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements. The surface characterization revealed that the surface of the CS/CNTs composite film became more hydrophobic with increasing amounts of CNTs. Cell attachment tests using bovine aortic endothelial cells (BAECs) indicated that CS/CNTs composite films retained their cell adhesion ability. The blood compatibility of the CS/CNTs composite films was evaluated using the blood platelet adhesion and activation tests in vitro. Platelet adhesion results confirmed that platelet adhesion and the formation of a platelet network were inhibited on composite films with higher concentrations of CNTs (5.1 wt%). Our experimental results show that the novel composite film containing CS/CNTs possesses two paradoxical characteristics, namely, good adherence of endothelial cells and minimum adherence and activation of platelets, making this film a promising antithrombogenic material for use in the biomedical field.     

Effect of local molecular shape and anisotropic reactivity on the rate of diffusion-controlled reactions.

The role of distance-dependent anisotropic reactivity and molecular geometry in the vicinity of localized reaction centers in influencing the rate of bimolecular diffusion-controlled reactions is analyzed in detail, both analytically and numerically. The effect of local molecular shape is considered within the model of reflective hemispheres of small radius l(h) on the surfaces of otherwise spherical molecules of radius R (l(h) < R). The distance-dependent reactivity is modeled by reactive hemispheres of radius l(r) on top of the reflective hemispheres (l(r) < R). It is shown that the presence of the reflective hemispheres leads to a markedly large increase of the reaction rate. The maximum effect is ~R/l(h) > 1 times, as described by the ratio of local to average molecular curvature. It is observed for l(h) approximately R(l(r)/R)(1/2) > l(r). The effect of thickness of the reaction regions is described within the model of reactive cylinders of height l(r) and angular radius theta < 1. It is shown that the characteristic parameter in the expansion of the reaction rate as a function of l(r)/R is l(r)/(Rtheta(2)), and therefore, even for small relative thickness d = l(r)/theta, its effect on the rate is very strong, i.e., the conventional model of reactive patches, which assumes zero thickness of the reaction region, may considerably underestimate the reaction rate.     

Atomistic Simulations of Uniaxial Tensile Behaviors of Single-walled Carbon Nanotubes

Atomistic simulations, using the second-generation reactive empirical bond order (REBO) potential, are performed to investigate the uniaxial tensile behaviors of single-walled carbon nanotubes (SWCNTs). It is found that the effect of the nanotube diameters on the elastic modulus, the tensile strength and the stress vs. strain relation of SWCNTs is small yet noticeable. However, the effect of the degree of helicity is significant.     

Diagnostics of MHD instability in the Globus-M spherical tokamak

The paper describes a diagnostic system for studying MHD plasma perturbations in the Globus-M spherical tokamak (a major radius of 0.36 m, a minor radius of 0.24 m, and an aspect ratio of 1.5). The system includes a poloidal and a toroidal array consisting of 28 and 16 Mirnov probes, respectively, as well as a 32-channel proportional soft X-ray detector. Methods are described for calculating the poloidal and toroidal numbers of the dominant helical perturbations by using data from probe measurements. Results are presented of processing the experimental data from some tokamak discharges with a plasma current of 150–250 kA, an average electron density of up to 10²⁰ m^?3, and a toroidal magnetic field of 0.4 T. Specific features of MHD perturbations and their influence on the parameters of the plasma column in different stages of a discharge are briefly discussed.     

Failure analysis of a beam-column under oblique-eccentric loading: potential failure surfaces for cervical spine trauma.

For a cantilever beam-column with one end built-in and the free end subjected to an oblique-eccentric arbitrary concentrated force, general formulas to produce failure were derived. The original generalized uniform solution to the oblique-eccentric buckling problem was obtained. The Secant formula and Euler's formula were proved to be specific cases in this general solution. The load ratio, F/aE, was derived as functions of the force acting direction, alpha, the slenderness ratio, L/r, as well as the eccentricity ratio, ec/r2. Material and buckling failures aspects were combined in a uniform structural failure analysis. Safe regions for the load ratio, F/aE, were visualized in the three-dimensional (F/aE)-alpha-(L/r) space with the eccentricity ratios, ec/r2, as a parameter. The column failure factor, kL, was shown to be a key index controlling both aspects of failure as well as the orientation of the second stiffest region. The angle alpha E = tan-1 (2L/pi e) for kL = pi/2 is the singular point for both strength and buckling failure, and alpha II = tan-1 (2L/3e) for KL = 0 is the upper bound of the second stiffest region. The feasible domain of the second stiffest region is bounded by alpha E and alpha II both of which are only functions of geometrical properties. The implications of these analyses for the experimental validation of cervical spine trauma are discussed.     

Layer-by-layer fabrication and direct electrochemistry of glucose oxidase on single wall carbon nanotubes

Layer-by-layer assembly of glucose oxidase (GOx) with single-wall carbon nanotubes (SWCNTs) is achieved on the electrode surface based on the electrostatic attraction between positively charged GOx in pH 3.8 buffer and negatively charged carboxylic groups of CNTs. The cyclic voltammetry and electrochemical impedance spectroscopy are used to characterize the formation of multilayer films. In deaerated buffer solutions, the cyclic voltammetry of the multilayer films of {GOx/CNT}_n shows two pairs of well-behaved redox peaks that are assigned to the redox reactions of CNTs and GOx, respectively, confirming the effective immobilization of GOx on CNTs using the layer-by-layer technique. The redox peak currents of GOx increase linearly with the increased number of layers indicating the uniform growth of GOx in multilayer films. The dependence of the cyclic voltammetric response of GOx in multilayer films on the scan rate and pH is also studied. A linear decrease of the reduction current of oxygen at the {GOx/CNT}-modified electrodes with the addition of glucose suggests that such multilayer films of GOx retain the bioactivity and can be used as reagentless glucose biosensors.     

Dynamic mechanical characterization of CNT–PP nanocomposites

In this study, molecular dynamic simulations were used to carry out a dynamic mechanical analysis of polymer nanocomposites (PNC) containing polypropylene (PP) and various volume fractions of single walled carbon nanotubes (SWCNTs). After assembling the composite unit cell, relaxation studies were performed by loading the specimen to a predetermined strain under quasistatic loading and then sustaining the strain while allowing the material to relax. Nano level readjustments of the polymer chains took place during this process, reducing the overall stress levels in the specimen. Free volumes and small voids permitted chain mobility around the carbon nanotubes. By fitting a standard relaxation curve, the nano relaxation parameters of the PNCs were deduced. Relaxation studies were also conducted at different equilibrium temperatures. Using the time temperature transformation relation, a master curve was generated for the nanocomposite with 1.0 % SWCNTs in order to obtain results over an extended period of time.