The local and condensed Fukui functions as well as the principle of hard and soft acids and bases were used to study the addition of free radicals to the exocyclic and endocyclic double bonds of seven monocyclic monoterpenes of formula C10H16. The results obtained showed that, in general, the most reactive double bond was the one with the most substituents on the double-bonded carbon atoms, and that the reaction of a double bond with an electrophile is a soft–soft interaction. The effects of substituents on the double-bonded carbon atoms and the stabilization of the monoterpenes were interpreted by invoking hyperconjugated structures, which led us to propose a simple rule: the larger the value of the Fukui function for the double bond, the greater the hyperconjugative stabilization and the susceptibility of the double bond to electrophilic attack. In general, our results are in good accordance with relevant experimental and theoretical results published in the literature.
Bond critical points (BCPs) in the quantum theory of atoms in molecules (QTAIM) are shown to be a consequence of the molecular topology, symmetry, and the Poincaré-Hopf relationship, which defines the numbers of critical points of different types in a scalar field. BCPs can be induced by a polarizing field or by addition of a single non-bonded atom to a molecule. BCPs and their associated bond paths are therefore suggested not to be a suitable means of identifying chemical bonds, or even attractive intermolecular interactions.
MP2/aug-cc-pVTZ calculations were performed for complexes linked by hydrogen bonds. Three types of proton donating species were taken into account: H2O, CCl3H, and H3O+. These calculations are supported by the natural bond orbital (NBO) method and the quantum theory of atoms in molecules (QTAIM) approach. Numerous correlations between parameters of H-bonded systems were found. The most important are those which show the response of the system on the H-bond formation; for example, the increase of polarization of the A-H bond correlates with the strength of the hydrogen bond. Similar relationships were found for the σ-hole bonds while the π-hole bonds do not follow the trends known for the hydrogen bonds.
A perfectly planar Al13+ cluster (CI) and a quasi-planar Al13+ cluster (CII) have been found for the first time. Both clusters have a triangular core surrounded by a set of ten Al atoms in the form of a ring. These cationic clusters have substantial aromatic character. The planar CI cluster has local antiaromatic patches within global aromatic sea. It is doubly aromatic having both σ and π aromatic character. The quasi-planar CII cluster is also aromatic but it has more σ-delocalization.
In this article, we explore the capacity of formed Schiff base complexes to trap metal atoms or ions, using their aromatic ends. The intrinsic geometry of each complex defines the process of substitution. Two cases were studied; one involving a trans Schiff base complex and the other considering how a salen ligand, with nickel systems traps chromium. We also assessed the nature of the new bonds and the frontier molecular orbitals.
A sphere-in-contact model is presented that is used to build physical models of carbon materials such as graphite, graphene, carbon nanotubes and fullerene. Unlike other molecular models, these models have correct scale and proportions because the carbon atoms are represented by their atomic radius, in contrast to the more commonly used space-fill models, where carbon atoms are represented by their van der Waals radii. Based on a survey taken among 65 undergraduate chemistry students and 28 PhD/postdoctoral students with a background in molecular modeling, we found misconceptions arising from incorrect visualization of the size and location of the electron density located in carbon materials. Based on analysis of the survey and on a conceptual basis we show that the sphere-in-contact model provides an improved molecular representation of the electron density of carbon materials compared to other molecular models commonly used in science textbooks (i.e., wire-frame, ball-and-stick, space-fill). We therefore suggest that its use in chemistry textbooks along with the ball-and-stick model would significantly enhance the visualization of molecular structures according to their electron density.
This paper inquires the C60 capabilities to contain radio-iodide (131I2) molecules. The encapsulation conditions are investigated applying first principles method to simulate with geometric optimizations and molecular dynamics at 310 K and atmospheric pressure. We find that the n131I2@C60 system, where n?=?1, 2, 3…, is stable if the content does not exceed three molecules of radio-iodide. The application of density functional theory allows us to determine that, the nanocapsules content limit is related with the amount of charge that is transferred from the iodine 131I2 molecules to the carbon atoms in the fullerene surface. The Mulliken population analysis reveals that the excess of charge increases the repulsive forces between atoms and the bond length average in the C60 structure. The weakened bonds easily break and will critically damage the encapsulation properties. Additionally, we test the interaction nanocapsules with different amounts of radioactive iodine diatomic molecules content with calcium atoms, and find that only the fullerene containing one radioactive iodine diatomic molecule was able to interact with up to nine atoms of calcium without disrupting or cracking. Other fullerenes with two and three radio iodine diatomic molecules cannot resist the interaction with a single calcium atom without cracking or being broken.
Seven models that related the features of molecular surface electrostatic potentials (ESPs) above the bond midpoints and rings, statistical parameters of ESPs to the experimental impact sensitivities h50 of eight strained cyclic explosives with the C–NO2 bonds were theoretically predicted at the DFT-B3LYP/6-311++G** level. One of the models was used to investigate the changes of h50 for the nitrocyclohydrocarbon frameworks in the H-bonded complexes of HF with nitrocyclopropane, nitrocyclobutane, nitrocyclopentane, and nitrocyclohexane. The results show that the correlation coefficients of the obtained models are small. When adding the effect of ring strain, the value of correlation coefficient is increased. According to the calculated h50, the sensitivities in the frameworks are increased after hydrogen bonding. As a global feature of molecules, surface electrostatic potential is more available to judge the sensitivity change than the trigger bond dissociation energy or ring strain energy in H-bonded complex.
Graphical Abstract A theoretical prediction of the relationships between the impact sensitivity and electrostatic potential in strained cyclic explosive and application to H-bonded complex of nitrocyclohydrocarbon?
Utilizing first-principles calculations, we studied the electronic and optical properties of C24, C12X6Y6, and X12Y12 fullerenes (X?=?B, Al; Y?=?N, P). These fullerenes are energetically stable, as demonstrated by their negative cohesive energies. The energy gap of C24 may be tuned by doping, and the B12N12 fullerene was found to have the largest energy gap. All of the fullerenes had finite optical gaps, suggesting that they are optical semiconductors, and they strongly absorb UV radiation, so they could be used in UV light protection devices. They could also be used in solar cells and LEDs due to their low reflectivities.
Unknown force-field parameters for metal organic beryllium complexes used in emitting and electron transporting layers of OLED structures are determined. These parameters can be used for the predictive atomistic simulations of the structure and properties of amorphous organic layers containing beryllium complexes. The parameters are found for the AMBER force field using a relaxed scan procedure and quantum-mechanical DFT calculations of potential energy curves for specific internal (angular) coordinates in a series of three Be complexes (Bebq2; Be(4-mpp)2; Bepp2). The obtained parameters are verified in calculations of some molecular and crystal structures available from either quantum-mechanical DFT calculations or experimental data.
Coarse-grained force field (CGFF) methods were applied to study the self-assembly of sodium dodecyl sulfate with fragrance additives. The CGFF parameters were parameterized and validated using experimental and all-atom simulation data. Direct molecular dynamics simulations were carried out to characterize the initial aggregation, partitioning of fragrances, and chemical potentials of the surfactant and fragrance molecules in aggregates of different sizes. The equilibrium critical micelle concentrations (CMCs) and micelle size distributions, which could not be obtained by direct simulation, were predicted using the calculated chemical potentials in combination with a thermodynamic model. The predicted partitioning of fragrances, CMCs, micelle sizes, and micelle structures agree well with previously reported experimental data.
The ternary complexes ML???PyZX2???NH3 (ML?=?CuCl, CuCN, AgCN, and AuCN; Z?=?P, As, and Sb; X?=?H and F) have been investigated with quantum chemical calculations. The results showed that the existence of coordination interaction has a prominent enhancing effect on the strength of pnicogen bonding. Even in ML???PySbH2???NH3, ML???PyAsF2???NH3, and ML???PySbF2???NH3, the pnicogen bond varies from a purely closed-shell interaction to a partially covalent interaction. The coordination interaction results in the enlargement of the σ-hole on the pnicogen atom and thus the enhancement of pnicogen bonding. In addition, the contribution of orbital interaction is also important.
Magnetic shielding constants for an isolated fullerene C60, cucurbituril CB[9], and the host-guest complex C60@CB[9] were calculated as a function of separation of the monomers. Our results in the gas phase and water indicate a significant variation of the magnetic properties for all atoms of the monomers in the complex and after liberation of fullerene C60 from the interior of the CB[9] cavity. The interaction between the two monomers results in a charge transfer that collaborates with a redistribution of electron density to deshield the monomers.
In the development of quantum computing and communications, improvements in materials capable of single photon emission are of great importance. Advances in single photon emission have been achieved experimentally by introducing nitrogen-vacancy (N-V) centers on diamond nanostructures. However, theoretical modeling of the anisotropic effects on the electronic properties of these materials is almost nonexistent. In this study, the electronic band structure and density of states of diamond nanowires with N-V defects were analyzed through first principles approach using the density functional theory and the supercell scheme. The nanowires were modeled on two growth directions [001] and [111]. All surface dangling bonds were passivated with hydrogen (H) atoms. The results show that the N-V introduces multiple trap states within the energy band gap of the diamond nanowire. The energy difference between these states is influenced by the growth direction of the nanowires, which could contribute to the emission of photons with different wavelengths. The presence of these trap states could reduce the recombination rate between the conduction and the valence band, thus favoring the single photon emission.
In this article, we explore, both theoretically and experimentally, the general reactivity of alkyl hydrogeno-phenylphosphinates with alcohols. We show that alcohol molecules act exclusively as nucleophilic species, and add to alkyl hydrogeno-phenylphosphinates, leading to pentacoordinated intermediates. These intermediates are shown to subsequently competitively undergo alcohol eliminations and/or Berry pseudorotations. This offers several possible routes for racemizations and/or alcohol exchange reactions. Transition standard Gibbs free energies predicted from DFT calculations for the overall alcohol exchange mechanism are shown to be compatible with those experimentally measured in case ethanol reacts with ethyl hydrogeno-phenylphosphinate (134.5～136.0 kJ mol?1 at 78 °C).
The half-metallic behavior of the perovskite Sr2FeMoO6 (SFMO) suggests that this material could be used in spintronic applications. Indeed, SFMO could be an attractive material for multiple applications due to the possibility that its electronic properties could be changed by modifying its spatial confinement or the relative contents of its constituent transition metals. However, there are no reports of theoretical studies on the properties of confined SFMOs with different transition metal contents. In this work, we studied the electronic properties of SFMO slabs using spin-polarized first-principles density functional theory along with the Hubbard-corrected local density approximation and a supercell scheme. We modeled three insulated SFMO slabs with Fe:Mo atomic ratios of 1:1, 1:0, and 0:1; all with free surfaces parallel to the (001) crystal plane. The results show that the half-metallicity of the SFMO is lost upon confinement and the material becomes a conductor, regardless of the ratio of Fe to Mo. It was also observed that the magnetic moment of the slab is strongly influenced by the oxygen atoms. These results could prove useful in attempts to apply SFMOs in fields other than spintronics.
Graphical abstract Losing the metallic behaviour: density of states changes, around the Fermi level, due to the Fe/Mo ratio for bidimensional perovskite systems
Theoretical calculations for the first tri-iron-based extended metal atom chain (EMAC) molecule are reported. The studied triple-high-spin (S?=?6) complex exhibits ferromagnetic ordering (according to Ising and spin-projection approximations), which renders it unique among all previously prepared and theoretically calculated EMAC compounds. This ordering originates from the prevailing ferromagnetic nearest-neighbor interactions, while the magnetic superexchange between terminal Fe2+ sites is weaker and antiferromagnetic. Calculations indicate that this linear chain system based on a tri-iron core shows potential for the development of spin-frustrated behavior, which could be achieved through rational modification of the equatorial and axial ligands.
We report first-principles calculations carried out to analyze the adsorption of calcium on the outer surface of the fullerene C60, yielding [C60?+?mCa]. Geometric optimization (GO) and molecular dynamics (MD) simulation were performed using the plane-wave pseudopotential method within the framework of density functional theory (DFT) and time-dependent DFT (TD-DFT) to investigate the configurations, the associated energies in the ground state, and the stabilities of fullerenes and endofullerenes doped with radioactive sodium iodide when they interact with calcium atoms on the outer fullerene surface (i.e., [nNa131I@C60?+?mCa]). The reason for investigating these calcium-functionalized (endo)fullerene systems was to gauge their potential stability when used as vectors to deliver radioiodine to cancerous tissue in the human body. In the simulations, we found that the geometric limit on the number of calcium atoms that can be physisorbed on the outer surface of an empty fullerene while maintaining its structural stability is 28 calcium atoms, which also takes into account the proportional expansion of the fullerene as the number of absorbed calcium atoms increases. However, the stability of a fullerene system during calcium adsorption also strongly depends on whether any atoms or molecules are being encapsulated by the fullerene, as these encapsulated atoms/molecules can also interact with the fullerene and influence its stability. A Mulliken electronegativity analysis revealed that, when atoms inside and/or outside the fullerene donate charge (electrons) to the fullerene, the fullerene expands. The excess charge on the carbon atoms of the fullerene weakens some of the carbon–carbon bonds, potentially causing them to break, in which case the fullerene loses its ability to encapsulate molecules and releases them.
Graphical Abstract DFT simulation of a endo fullerene doped with radioactive sodium iodide interacting with 28 calcium atoms in a geometric arrangement
