A demonstration that o2− is a crucial intermediate in the high quantum yield luminescence of luminol

The chemiluminescence of luminol, due to its reaction with alkaline H₂O₂, is inhibited by Superoxide dismutase or by hydroxyl radical scavengers. Hematin markedly enhances this H₂O₂-induced luminescence of luminol and lessens, but does not eliminate, the sensitivity towards these inhibitors. Reaction mechanisms are proposed to account for these results. Since luminol luminescence depends upon a reaction between the luminol radical and O₂⁻, and since the luminol radical can reduce dioxygen to O₂⁻, Superoxide dismutase-inhibitable luminol luminescence cannot be reliably used as a detector of O₂⁻ production.     

Luminol Luminescence Induced by 2,2'-Azo-Bis(2-Amidinopropane) Thermolysis

2-2'-Azo-bis(2-amidinopropane) thermolysis induces luminol luminescence. The luminescence intensity is quenched by SOD, catalase, Trolox and human blood serum. However, the time course of the light intensity profile is different for the different additives. In particular, the quenching efficiency of Trolox and human blood serum decreases with time after addition. Double quenching experiments show that SOD and Trolox are not competitive quenchers, while a simple competition can be established between Trolox and human blood serum in trapping a common intermediate. From the kinetic analysis of the data it is concluded that, at least at low additive concentrations, Trolox scavenges a luminol derived radical. Higher concentrations of Trolox or human blood serum produce induction times that are proportional to the additives concentrations. The possibility of employing luminol luminescence in the evaluation of TRAP levels and the capacity of biological samples to scavenge free radicals is discussed.     

A comparative study of peroxidases from horse radish and Arthromyces ramosus as labels in luminol-mediated chemiluminescent assays.

The properties of a peroxidase from Arthromyces ramosus (ARP) in the chemiluminescent reaction of luminol oxidation have been studied. These were compared with the properties of horse radish peroxidase (HRP) in the cooxidation of luminol and p-iodophenol, the enhanced chemiluminescence (ECL) reaction. By means of the stop-flow technique, ARP was shown to have an enzymatic activity toward luminol higher than that toward HRP. ARP can efficiently catalyze luminol oxidation in the absence of substrate enhancer. pH and substrate concentrations were optimized to determine ARP with the highest sensitivity. The detection limit of ARP was 5 x 10(-13) M, the same as that for HRP in the ECL reaction. The data on the use of ARP as a label in enzyme immunoassay of human IgG are presented. ARP was shown to have all the advantages of HRP as a label in chemiluminescent enzyme immunoassays: (i) high signal intensity, (ii) slow decay of luminescence, (iii) high signal/noise ratio, and (iv) as a consequence of (i)-(iii), high detection sensitivity. However, the low thermostability of ARP can limit the potential fields of its application.     

盐生盐杆菌在不同营养条件下紫膜蛋白形成的差异

用四种培养基培养产生紫膜极端嗜盐菌盐生盐杆菌（Ｈａｌｏｂａｃｔｅｒｉｕｍｈａｌｏｂｉｕｍ）菌株Ｒ１,通过超速离心和蔗糖密度梯度纯化紫膜,ＳＤＳ－ＰＧＡＥ后用考马斯亮蓝染色的结果显示其合成的紫膜蛋白的形式有所差异。从蛋白胨培养基上获得的紫膜有三条蛋白带,分子量约２６～２７５ｋＤ,而从复合培养基、合成培养基和人工海水培养基上获得的紫膜,仅呈现一条蛋白带,分子量约２６ｋＤ,即蛋白胨培养基上的成熟紫膜蛋白形式。ＷｅｓｔｅｒｎＢｌｏｔｉｎｇ的结果证明,在以上四种培养基上获得的纯化紫膜经ＳＤＳ－ＰＧＡＥ后考马斯亮蓝染色的条带确系紫膜蛋白,但还存在含量低于考马斯亮蓝染色灵敏度的紫膜蛋白带,从复合培养基、合成培养基和人工海水培养基所得紫膜在２８ｋＤ左右有一条浅带,但从蛋白胨培养基所得紫膜无此带;四种培养基所得紫膜在２３５ｋＤ左右都有一条浅带。可见,培养基营养成分的差别影响了紫膜蛋白的存在形式     

Detection of S-glutathionylated proteins by glutathione S-transferase overlay

Oxidative and nitrosative stress lead to the S-glutathionylation of proteins and subsequent functional impairment. Glutathione S-transferase (GST) from Schistosoma japonicum was found to bind to the glutathione moiety of S-glutathionylated proteins, thus establishing a convenient method for detecting S-glutathionylated proteins by biotinylated GST. Applications of this method to proteins that were prepared from cultured cells and blotted onto a membrane exhibited numerous positive bands, which were abolished by treatment with dithiothreitol. Treatment of a cellular extract with nitrosoglutathione led to enhanced staining of the bands in a dose-dependent manner. The method was also applicable for the histochemical detection of S-glutathionylated proteins in situ. The positive staining by biotin-GST became faint in the presence of S-glutathionylated ovalbumin, suggesting that the reaction is specific to S-glutathionylated proteins. Collectively, these data indicate that the method established here is simple and useful for detecting S-glutathionylated proteins on blotted membrane and in situ.     

A simple chemiluminescence-based method for rapid enumeration of Listeria spp. microcolonies

AIMS: Listeria monocytogenes is capable, under certain conditions, of producing chemiluminescence which is amplified by luminol. This property was used to detect and count microcolonies of Listeria spp. in a few hours, without the use of a microscope. METHODS AND RESULTS: After trapping Listeria cells on polyvinylidene fluoride membranes, a chemiluminescence mixture was sprayed onto the membrane. The chemiluminescent spots emitted were analysed by a charge-coupled device camera connected to a data-processing system, which restored the intensity of the signals into three dimensional images. The intensity of the luminescence of microcolonies was improved by addition of cellobiose, and by brief exposure to u.v. light. CONCLUSION: Microcolonies of Listeria spp. can be imaged and counted by luminol-enhanced chemiluminescence with a photon-counting system. SIGNIFICANCE AND IMPACT OF THE STUDY: This method can be applied to the rapid detection and counting of Listeria spp. in raw milk.     

Chemiluminescent assay for detection of viable microorganisms

The redox reaction between quinone and viable microorganisms produces active oxygen species. In this study, the production rates of active oxygen species were determined by a luminol chemiluminescent assay, and the luminescence intensity was found to be proportional to the viable cell number. The high sensitivity of the luminol chemiluminescent assay was achieved with Mo-ethylenediaminetetraacetate complex and menadione or coenzyme Q1. The detectable cell densities of bacteria and yeasts were found to be approximately several thousand colony-forming units (CFU/ml) when assays were performed with a 96-well microplate luminometer. The chemiluminescent assay requires 10 min for incubation of quinone and microorganisms and 2s for photon counting. Single Escherichia coli was detected after 4h of cultivation and centrifugation (5 min x 2). This simple chemiluminescent assay is expected to be useful for the rapid detection of viable bacteria and yeast.     

Luminescent immunodetection of western-blotted proteins from coomassie-stained polyacrylamide gel

Immunodetection with horseradish peroxidase-linked antibodies on Coomassie-stained nitrocellulose blots can be performed efficiently and rapidly with the peroxidase substrate luminol. The luminescence produced is detected with radioautographic film. This procedure allows a direct identification of immunodetected bands of stained nitrocellulose sheets without using radiolabeled secondary antibodies. Because of its convenience and sensitivity, this method could be particularly suitable for purification of immunodetected proteins.     

Improvements to enhanced horseradish peroxidase detection sensitivity

At very low horseradish peroxidase (HRP) concentrations, the enhanced chemiluminescence reaction is often characterized by a lag time between initiation of the reaction and beginning of light output. In this study, four treatments of luminol solution were examined in an effort to remove the lag time and to improve chemiluminescence light output. Addition of ammonium persulphate stimulated light output more than tenfold. Ultraviolet irradiation and photoactive dye pretreatment of luminol solution both increased light output fourfold. Luminol purity was the most important factor affecting detection sensitivity. Recrystallization of luminol from base improved the detection limit 13-fold although there was an improvement in the detection limit from 13 attomoles per millilitre to 5 attomoles per millilitre with highly purified luminol when photoactive dye pretreatment was utilized. The results are consistent with a simple interference mechanism whereby enhancer radicals produced by the enzyme are preferentially quenched by contaminants present in the luminol, in the enhancer and in the solvent used to dissolve the enhancer. Consumption of these interferences prior to light emission results in a lag time and a less favourable HRP detection limit.     

Cathodic electrochemiluminescent behavior of luminol at nafion-nano-TiO2 modified glassy carbon electrode

The electrochemiluminescence (ECL) behavior of luminol on a nafion-nano-TiO(2) modified glassy carbon electrode (nafion-nano-TiO(2)--GCE) was studied. Two ECL peaks (ECL-1 and ECL-2) were found during cathodic potential scanning. ECL-1 at ca -0.4 V (vs Ag--AgCl reference electrode) came from the reaction between luminol and active oxygen anion produced at the GCE surface directly, while ECL-2 at ca -0.9 V (vs Ag--AgCl reference electrode) came from the reaction between luminol and the active oxygen anion catalyzed by TiO(2.) The possible mechanism for the generation of both ECL peaks has been proposed. The reproducibility of the ECL intensities on nafion-nano-TiO(2)--GCE at ECL-1 and ECL-2 was good, with relative standard deviations (n = 10) of 4.3 and 1.3%, respectively. The ECL-2 generated at the nafion-nano-TiO(2)--GCE surface was further developed to detect the dissolved oxygen, and a detection limit of 0.02 mg/L was achieved. The proposed method was applied to detect dissolved oxygen in water with satisfactory result.     

Study of oxygen photoreduction in chloroplasts by the method of luminol and chlorophyll chemiluminescence]

The reduction of oxygen by irradiated chloroplasts was studied for elucidation of oxygen action site in the electron transport chain of photosynthesis. Chemiluminescence system, consisted of luminol and peroxidase, was used for registration of oxygen reduction products. In the first case chemiluminescence system was added to supernatant fraction after centrifugation of suspension of irradiated chloroplasts in order to determine H2O2 which was found to be the final product of oxygen photoreduction. In the second case when chloroplasts were illuminated in the presence of chemiluminescence system and oxygen the fact delayed luminescence of luminol was observed. This photoluminescence related also with the oxygen reduction in chloroplasts caused a possible formation of radicals HO2 (or -O2). The formation of this radicals and H2O2 was inhibited by DCMU, heating of chloroplasts at 45 degrees C for 5 min and by washing with EDTA and NH2OH. The rate of HO2 dissappearance was increased by methylviologen. The kinetics of photoluminescence of luminol and afterglow of chlorophyll in chloroplasts was identical in the interval from 20 msec to several seconds. It is suggested that oxygen reaction site is located near the reaction centre of chloroplasts.     

Characteristics of luminol chemiluminescence induced by the catalytic action of myeloperoxidase

The effects of pH, luminol myeloperoxidase and hydrogen peroxide concentrations on the intensity of luminol chemiluminescence induced by myeloperoxidase catalysis were investigated. It was found that the intensity of luminescence is proportional to the enzyme concentration (up to 8.10(-8) M) and reaches the saturation level at higher enzyme concentrations. The dependence of chemiluminescence intensity on [H2O2] is bell-shaped: at H2O2 concentrations above 1.10(-4) M the luminescence is inhibited with a maximum at neutral values of pH. Luminol at concentrations above 5.10(-5) M inhibits this process. It was demonstrated that the effects of singlet oxygen, superoxide and hydroxyl radicals on the chemiluminescence reaction are insignificant. Luminol oxidation in the course of the myeloperoxidase reaction is induced by hypochlorite.     

On the nature and causes of luminescent lines and bands in coral skeletons: II. Contribution of skeletal crystals

Slices cut from skeletons of massive Porites display two types of luminescence when illuminated by ultra-violet (UV) light: (1) faint luminescent banding associated with the annual skeletal density banding pattern and (2) narrow lines of strong luminescence associated with monsoonal runoff of fresh water from nearby land. Barnes and Taylor [Barnes, D.J. Taylor, R.B. 2001a. On the nature and causes of luminescent lines and bands in coral skeletons. Coral Reefs 19, 221-230] showed how larger skeletal holes could give rise to increased luminescence—thus accounting for the link between skeletal density banding and faint luminescent banding. Work described here tests the notion that strongly luminescent lines are also regions of lower skeletal density. Experiments involving real and artificial coral skeletons indicated that likely changes in hole size in real skeletons cannot account for the amount of luminescence associated with luminescent lines. Larger particles (< 50 μm) of powdered skeleton from cut from luminescent lines were more luminescent than similar particles cut from adjacent less luminescent skeleton. However, very small particles (< 3 μm) from the two regions of skeleton showed no difference in luminescence. Since skeletal crystals would have been largely destroyed by powdering skeleton to very small particle sizes, most of the luminescence of strongly luminescent lines is probably associated with changed crystal size and packing, with changed crystal chemistry, or with a combination of these possibilities.     

The role of superoxide anion in peroxidase-catalyzed chemiluminescence of luminol

The chemiluminescence associated with peroxidation of luminol in buffered aqueous solution is a complex process involving several intermediates. It can be inhibited by removal of oxygen from the incubation medium. Superoxide radical is both an intermediate in this reaction and an essential component in light-producing steps. The importance of O₂^? in propagating this reaction was shown by the inhibition of luminescence by superoxide dismutase. A mechanism was proposed which is consistent with the data. It appears likely that the diverse biological effects of peroxidases are largely due to the reactivities of these intermediates and products.     

Derivatization of biomolecules for chemiluminescent detection in capillary electrophoresis

An overview is presented on the power and drawbacks of the relatively unfamiliar chemiluminescence-based detection technique applied in analysis by capillary electrophoresis, for determining chemically derivatized biomolecules. Examples of the most common systems are given for many series of biologically active compounds as well as for some pharmaceuticals. The most common chemiluminescent systems include the application of peroxyoxalate ester chemiluminescence, acridinium esters, luminol and derivatives, detection based on the tris(2,2'-bipyridine)ruthenium(III) system, the huge potentials offered by direct oxidations-though often with still unelucidated reaction mechanisms-and the powerful area of bioluminescence techniques, revealing as well the fast developing area of microchip-based analysis employing this specific luminescence principle.     

An efficient method for the synthesis and purification of trans-[14C]geranylgeranyl pyrophosphate.

A new and highly sensitive enzyme immunoassay of cortisol was established using horseradish peroxidase as the label. Separation of free and bound cortisol was effected by insolubilized anti-cortisol antibody which was prepared by coupling the purified immunoglobulin G of antiserum with Sepharose 4B. The enzyme activity was measured by the chemiluminescence reaction using luminol and hydrogen peroxide as substrate. The faint chemiluminescence was measured by a photon counter. Comparison of assay results obtained by radioimmunoassay and this enzyme immunoassay showed excellent agreement of results in all cases (r = 0.913). The detection limit of cortisol was about 10 pg per assay tube. This enzyme immunoassay is applicable to the routine determination of plasma cortisol.     

Use of 5-(4-dimethylaminobenzylidene)rhodanine in quantitating silver grains eluted from autoradiograms of biological material

5-(4-Dimethylaminobenzylidene)rhodamine, a silver-specific dye, was used in a colorimetric assay to quantitate the autoradiographic deposition of silver onto X-ray film after exposure to sodium dodecyl sulfate-polyacrylamide gels of radiolabeled biological material. Silver grains were eluted from autoradiograms with 5 N potassium hydroxide, dissolved in nitric acid, and neutralized with 1 M Trizma Base. The concentration of silver was measured spectrophotometrically owing to the chelation properties of the dye. After corrections for background exposure were made, the silver contents of excised bands were then determined by comparison to a standard curve generated with silver nitrate. We have used this silver assay to quantitate the relative amount of each polypeptide band comprising the polyomavirus structural protein VP2 doublet. The method reported here has proven useful when densitometry is inconvenient (i.e., short distance between bands, irregular shape of bands, very faint bands) in addition to being inexpensive and simple to perform.     

High-sensitivity analysis of glycosphingolipids by matrix-assisted laser desorption/ionization quadrupole ion trap time-of-flight imaging mass spectrometry on transfer membranes

Glycosphingolipids are ubiquitous constituents of cells. Yet there is still room for improvement in the techniques for analyzing glycosphingolipids. Here we report our highly sensitive and convenient analytical technology with imaging mass spectrometry for detailed structural analysis of glycosphingolipids. We were able to determine detailed ceramide structures; i.e., both the sphingosine base and fatty acid, by MS/MS/MS analysis on a PVDF membrane with 10 pmol of GM1, with which only faint bands were visible by primuline staining. The limit of detection was approximately 1 pmol of GM1, which is lower than the value in the conventional reports (10 pmol).     

Simultaneous detection of native and luminol-dependent luminescence of stimulated human polymorphonuclear leukocytes

A method for investigating the cellular response of polymorphonuclear leukocytes to various stimuli was introduced using simultaneously native (luminol-independent) and luminol dependent luminescence as an indicator for myeloperoxidase (MPO)-H2O2-halide and O2- mediated reactions. In experimental systems containing low concentrations of luminol the total light emission was separated into contributions of native and luminol-dependent luminescence by making use of the different spectral behaviour of the two kinds of luminescence. Consequently the MPO-H2O2-halide system could be distinguished from the O2- dependent system by interpreting the recorded temporal traces of the emitted light.     

Quantitative analysis of CL-20 explosive by smartphone-based chemiluminescence method

A new smartphone-based chemiluminescence method has been introduced for the quantitative analysis of CL-20 (Hexanitroazaisowuertzitan) explosive. The solvent mixture, oxidizer agent, and concentration of the reactants were optimized using statistical procedures. CL-20 explosive showed a quenching effect on the chemiluminescence intensity of the luminol−NaClO reaction in the solvent mixture of DMSO/H₂O. A smartphone was used as a detector to record the light intensity of chemiluminescence reaction as a video file. The recorded video file was converted to an analytical signal as intensity luminescence–time curve by a written code in MATLAB software. Dynamic range and limit of detection of the proposed method were obtained 2.0–240.0 and 1.1 mg⋅L⁻¹, respectively, in optimized concentrations 1.5 × 10⁻³ mol⋅L⁻¹ luminol and 1.0 × 10⁻² mol⋅L⁻¹ NaClO. Precursors TADB, HBIW, and TADNIW in CL-20 explosive synthesis did not show interference in measurement the CL-20 purity. The analysis of CL-20 spiked samples of soil and water indicated the satisfactory ability of the method in the analysis of real samples. The interaction of CL-20 molecules and OCl⁻ ions is due to quench of chemiluminescence reaction of the luminol−NaClO.