A microtubule-destabilizing kinesin motor regulates spindle length and anchoring in oocytes

The kinesin-13 motor, KLP10A, destabilizes microtubules at their minus ends in mitosis and binds to polymerizing plus ends in interphase, regulating spindle and microtubule dynamics. Little is known about kinesin-13 motors in meiosis. In this study, we report that KLP10A localizes to the unusual pole bodies of anastral Drosophila melanogaster oocyte meiosis I spindles as well as spindle fibers, centromeres, and cortical microtubules. We frequently observe the pole bodies attached to cortical microtubules, indicating that KLP10A could mediate spindle anchoring to the cortex via cortical microtubules. Oocytes treated with drugs that suppress microtubule dynamics exhibit spindles that are reoriented more vertically to the cortex than untreated controls. A dominant-negative klp10A mutant shows both reoriented and shorter oocyte spindles, implying that, unexpectedly, KLP10A may stabilize rather than destabilize microtubules, regulating spindle length and positioning the oocyte spindle. By altering microtubule dynamics, KLP10A could promote spindle reorientation upon oocyte activation.     

A Kin I-Independent Pacman: Flux Mechanism for Anaphase A

Anaphase A chromatid-to-pole motion is fundamental for proper chromosome segregation in most systems. During the past several decades, two models for the mechanism of anaphase A have come to prominence. The Pacman model posits that chromatids induce the depolymerization of microtubule plus-ends embedded in kinetochores, thereby ‘chewing’ their way poleward. Alternatively, the Poleward-flux model posits that chromatids are ‘reeled-in’ to poles by the continual depolymerization of the minus-ends of kinetochore-associated microtubules, which are focused at spindle poles. In a recent study, we reported that anaphase A in Drosophila requires the depolymerization of both ends of kinetochore-associated microtubules, simultaneously. This is driven by two members of the Kin I subfamily of kinesins, termed KLP59C and KLP10A, which target specifically to chromatids and spindle poles, respectively. We have termed this hybrid of Pacman and Poleward flux the Kin I-dependent Pacman-flux mechanism for anaphase A. Here, we discuss the implications of these findings and explore potential additional components required to drive chromatid-to-pole motion by such a mechanism.     

TPX2 phosphorylation maintains metaphase spindle length by regulating microtubule flux

A steady-state metaphase spindle maintains constant length, although the microtubules undergo intensive dynamics. Tubulin dimers are incorporated at plus ends of spindle microtubules while they are removed from the minus ends, resulting in poleward movement. Such microtubule flux is regulated by the microtubule rescue factors CLASPs at kinetochores and depolymerizing protein Kif2a at the poles, along with other regulators of microtubule dynamics. How microtubule polymerization and depolymerization are coordinated remains unclear. Here we show that TPX2, a microtubule-bundling protein and activator of Aurora A, plays an important role. TPX2 was phosphorylated by Aurora A during mitosis. Its phospho-null mutant caused short metaphase spindles coupled with low microtubule flux rate. Interestingly, phosphorylation of TPX2 regulated its interaction with CLASP1 but not Kif2a. The effect of its mutant in shortening the spindle could be rescued by codepletion of CLASP1 and Kif2a that abolished microtubule flux. Together we propose that Aurora A–dependent TPX2 phosphorylation controls mitotic spindle length through regulating microtubule flux.     

Microtubule-Depolymerizing Kinesin KLP10A Restricts the Length of the Acentrosomal Meiotic Spindle in Drosophila Females

During cell division, a bipolar array of microtubules forms the spindle through which the forces required for chromosome segregation are transmitted. Interestingly, the spindle as a whole is stable enough to support these forces even though it is composed of dynamic microtubules, which are constantly undergoing periods of growth and shrinkage. Indeed, the regulation of microtubule dynamics is essential to the integrity and function of the spindle. We show here that a member of an important class of microtubule-depolymerizing kinesins, KLP10A, is required for the proper organization of the acentrosomal meiotic spindle in Drosophila melanogaster oocytes. In the absence of KLP10A, microtubule length is not controlled, resulting in extraordinarily long and disorganized spindles. In addition, the interactions between chromosomes and spindle microtubules are disturbed and can result in the loss of contact. These results indicate that the regulation of microtubule dynamics through KLP10A plays a critical role in restricting the length and maintaining bipolarity of the acentrosomal meiotic spindle and in promoting the contacts that the chromosomes make with microtubules required for meiosis I segregation.     

The chromokinesin, KLP3A, dives mitotic spindle pole separation during prometaphase and anaphase and facilitates chromatid motility

Mitosis requires the concerted activities of multiple microtubule (MT)-based motor proteins. Here we examined the contribution of the chromokinesin, KLP3A, to mitotic spindle morphogenesis and chromosome movements in Drosophila embryos and cultured S2 cells. By immunofluorescence, KLP3A associates with nonfibrous punctae that concentrate in nuclei and display MT-dependent associations with spindles. These punctae concentrate in indistinct domains associated with chromosomes and central spindles and form distinct bands associated with telophase midbodies. The functional disruption of KLP3A by antibodies or dominant negative proteins in embryos, or by RNA interference (RNAi) in S2 cells, does not block mitosis but produces defects in mitotic spindles. Time-lapse confocal observations of mitosis in living embryos reveal that KLP3A inhibition disrupts the organization of interpolar (ip) MTs and produces short spindles. Kinetic analysis suggests that KLP3A contributes to spindle pole separation during the prometaphase-to-metaphase transition (when it antagonizes Ncd) and anaphase B, to normal rates of chromatid motility during anaphase A, and to the proper spacing of daughter nuclei during telophase. We propose that KLP3A acts on MTs associated with chromosome arms and the central spindle to organize ipMT bundles, to drive spindle pole separation and to facilitate chromatid motility.     

Antagonistic microtubule-sliding motors position mitotic centrosomes in Drosophila early embryos

The positioning of centrosomes, or microtubule-organizing centres, within cells plays a critical part in animal development. Here we show that, in Drosophila embryos undergoing mitosis, the positioning of centrosomes within bipolar spindles and between daughter nuclei is determined by a balance of opposing forces generated by a bipolar kinesin motor, KLP61F, that is directed to microtubule plus ends, and a carboxy-terminal kinesin motor, Ncd, that is directed towards microtubule minus ends. This activity maintains the spacing between separated centrosomes during prometaphase and metaphase, and repositions centrosomes and daughter nuclei during late anaphase and telophase. Surprisingly, we do not observe a function for KLP61F in the initial separation of centrosomes during prophase. Our data indicate that KLP61F and Ncd may function by crosslinking and sliding antiparallel spindle microtubules in relation to one another, allowing KLP61F to push centrosomes apart and Ncd to pull them together.     

Spindle pole organization in Drosophila S2 cells by dynein, abnormal spindle protein (Asp), and KLP10A

Dynein is a critical mitotic motor whose inhibition causes defects in spindle pole organization and separation, chromosome congression or segregation, and anaphase spindle elongation, but results differ in different systems. We evaluated the functions of the dynein-dynactin complex by using RNA interference (RNAi)-mediated depletion of distinct subunits in Drosophila S2 cells. We observed a striking detachment of centrosomes from spindles, an increase in spindle length, and a loss of spindle pole focus. RNAi depletion of Ncd, another minus-end motor, produced disorganized spindles consisting of multiple disconnected mini-spindles, a different phenotype consistent with distinct pathways of spindle pole organization. Two candidate dynein-dependent spindle pole organizers also were investigated. RNAi depletion of the abnormal spindle protein, Asp, which localizes to focused poles of control spindles, produced a severe loss of spindle pole focus, whereas depletion of the pole-associated microtubule depolymerase KLP10A increased spindle microtubule density. Depletion of either protein produced long spindles. After RNAi depletion of dynein-dynactin, we observed subtle but significant mislocalization of KLP10A and Asp, suggesting that dynein-dynactin, Asp, and KLP10A have complex interdependent functions in spindle pole focusing and centrosome attachment. These results extend recent findings from Xenopus extracts to Drosophila cultured cells and suggest that common pathways contribute to spindle pole organization and length determination.     

Motor activity and mitotic spindle localization of the Drosophila kinesin-like protein KLP61F.

The KLP61F gene product is essential for Drosophila development. Mutations in KLP61F display a mitotic arrest phenotype caused by a failure in the proper separation of duplicated centrosomes (Heck et al., 1993). Sequence analysis of KLP61F identified it as a member of the bimC family of kinesin-like microtubule motor proteins. Here we report that KLP61F is distinct from KRP130, a kinesin-like protein recently purified from Drosophila embryos and suggested to be the product of the KLP61F gene (Cole et al., 1994). We also characterized recombinant KLP61F and found that it possesses microtubule-stimulated ATPase and microtubule translocation activities in vitro. In addition, we have used an affinity-purified, KLP61F-specific antiserum to localize native KLP61F and an epitope-tagged KLP61F fusion protein during various stages of mitosis in Drosophila syncytial blastoderm embryos. From early prophase through anaphase, KLP61F is coincident with the distribution of tubulin. Together these results confirm the existence of multiple bimC-like kinesins in Drosophila and suggest that KLP61F function is intrinsic to the mitotic spindle.     

The Drosophila Kinesin-13, KLP59D,Impacts Pacman- and Flux-based Chromosome Movement

Chromosome movements are linked to the active depolymerization of spindle microtubule (MT) ends. Here we identify the kinesin-13 family member, KLP59D, as a novel and uniquely important regulator of spindle MT dynamics and chromosome motility in Drosophila somatic cells. During prometaphase and metaphase, depletion of KLP59D, which targets to centrosomes and outer kinetochores, suppresses the depolymerization of spindle pole–associated MT minus ends, thereby inhibiting poleward tubulin Flux. Subsequently, during anaphase, loss of KLP59D strongly attenuates chromatid-to-pole motion by suppressing the depolymerization of both minus and plus ends of kinetochore-associated MTs. The mechanism of KLP59D''s impact on spindle MT plus and minus ends appears to differ. Our data support a model in which KLP59D directly depolymerizes kinetochore-associated plus ends during anaphase, but influences minus ends indirectly by localizing the pole-associated MT depolymerase KLP10A. Finally, electron microscopy indicates that, unlike the other Drosophila kinesin-13s, KLP59D is largely incapable of oligomerizing into MT-associated rings in vitro, suggesting that such structures are not a requisite feature of kinetochore-based MT disassembly and chromosome movements.     

Functionally distinct kinesin-13 family members cooperate to regulate microtubule dynamics during interphase

Regulation of microtubule polymerization and depolymerization is required for proper cell development. Here, we report that two proteins of the Drosophila melanogaster kinesin-13 family, KLP10A and KLP59C, cooperate to drive microtubule depolymerization in interphase cells. Analyses of microtubule dynamics in S2 cells depleted of these proteins indicate that both proteins stimulate depolymerization, but alter distinct parameters of dynamic instability; KLP10A stimulates catastrophe (a switch from growth to shrinkage) whereas KLP59C suppresses rescue (a switch from shrinkage to growth). Moreover, immunofluorescence and live analyses of cells expressing tagged kinesins reveal that KLP10A and KLP59C target to polymerizing and depolymerizing microtubule plus ends, respectively. Our data also suggest that KLP10A is deposited on microtubules by the plus-end tracking protein, EB1. Our findings support a model in which these two members of the kinesin-13 family divide the labour of microtubule depolymerization.     

A Chlamydomonas Homologue of the Putative Murine t Complex Distorter Tctex-2 Is an Outer Arm Dynein Light Chain

The kinesin superfamily is a large group of proteins (kinesin-like proteins [KLPs]) that share sequence similarity with the microtubule (MT) motor kinesin. Several members of this superfamily have been implicated in various stages of mitosis and meiosis. Here we report our studies on KLP67A of Drosophila. DNA sequence analysis of KLP67A predicts an MT motor protein with an amino-terminal motor domain. To prove this directly, KLP67A expressed in Escherichia coli was shown in an in vitro motility assay to move MTs in the plus direction. We also report expression analyses at both the mRNA and protein level, which implicate KLP67A in the localization of mitochondria in undifferentiated cell types. In situ hybridization studies of the KLP67A mRNA during embryogenesis and larval central nervous system development indicate a proliferation-specific expression pattern. Furthermore, when affinity-purified anti-KLP67A antisera are used to stain blastoderm embryos, mitochondria in the region of the spindle asters are labeled. These data suggest that KLP67A is a mitotic motor of Drosophila that may have the unique role of positioning mitochondria near the spindle.     

Poleward microtubule flux is a major component of spindle dynamics and anaphase a in mitotic Drosophila embryos

During cell division, eukaryotic cells assemble dynamic microtubule-based spindles to segregate replicated chromosomes. Rapid spindle microtubule turnover, likely derived from dynamic instability, has been documented in yeasts, plants and vertebrates. Less studied is concerted spindle microtubule poleward translocation (flux) coupled to depolymerization at spindle poles. Microtubule flux has been observed only in vertebrates, although there is indirect evidence for it in insect spermatocytes and higher plants. Here we use fluorescent speckle microscopy (FSM) to demonstrate that mitotic spindles of syncytial Drosophila embryos exhibit poleward microtubule flux, indicating that flux is a widely conserved property of spindles. By simultaneously imaging chromosomes (or kinetochores) and flux, we provide evidence that flux is the dominant mechanism driving chromosome-to-pole movement (anaphase A) in these spindles. At 18 degrees C and 24 degrees C, separated sister chromatids moved poleward at average rates (3.6 and 6.6 microm/min, respectively) slightly greater than the mean rates of poleward flux (3.2 and 5.2 microm/min, respectively). However, at 24 degrees C the rate of kinetochore-to-pole movement varied from slower than to twice the mean rate of flux, suggesting that although flux is the dominant mechanism, kinetochore-associated microtubule depolymerization contributes to anaphase A.     

A homotetrameric kinesin-5, KLP61F, bundles microtubules and antagonizes Ncd in motility assays

BACKGROUND: Mitosis depends upon the cooperative action of multiple microtubule (MT)-based motors. Among these, a kinesin-5, KLP61F, and the kinesin-14, Ncd, are proposed to generate antagonistic-sliding forces that control the spacing of the spindle poles. We tested whether purified KLP61F homotetramers and Ncd homodimers can generate a force balance capable of maintaining a constant spindle length in Drosophila embryos. RESULTS: Using fluorescence microscopy and cryo-EM, we observed that purified full-length, motorless, and tailless KLP61F tetramers (containing a tetramerization domain) and Ncd dimers can all cross-link MTs into bundles in MgATP. In multiple-motor motility assays, KLP61F and Ncd drive plus-end and minus-end MT sliding at 0.04 and 0.1 microm/s, respectively, but the motility of either motor is decreased by increasing the mole fraction of the other. At the "balance point," the mean velocity was zero and MTs paused briefly and then oscillated, taking approximately 0.3 microm excursions at approximately 0.02 microm/s toward the MT plus end and then the minus end. CONCLUSIONS: The results, combined with quantitative analysis, suggest that these motors could act as mutual brakes to modulate the rate of pole-pole separation and could maintain a prometaphase spindle displaying small fluctuations in its steady-state length.     

Functional Roles of Poleward Microtubule Flux During Mitosis

Poleward microtubule flux is a conserved process during mitosis and meiosis in metazoan cells and is defined as the translocation of spindle microtubules toward spindle poles coupled to the depolymerization of their minus-ends. In some cell types, the rate of poleward microtubule flux matches that of poleward chromatid movement during anaphase A, suggesting that it pulls chromatids poleward. However, in other cell types, the rate of poleward microtubule flux is significantly slower than chromatid movement during anaphase A, suggesting that it makes little contribution to chromatid movement. This discrepancy led to speculation that flux is maintained in these cells to fulfill other functional roles aside from contributing to anaphase A chromatid movement. These roles include contributing to chromosome alignment, regulating spindle size and microtubule turnover, and correcting errors in chromosome attachment to spindle microtubules. Here, we discuss recent data that begin to pinpoint the functional roles of poleward microtubule flux during mitosis and meiosis.     

Functional coordination of three mitotic motors in Drosophila embryos

It is well established that multiple microtubule-based motors contribute to the formation and function of the mitotic spindle, but how the activities of these motors interrelate remains unclear. Here we visualize spindle formation in living Drosophila embryos to show that spindle pole movements are directed by a temporally coordinated balance of forces generated by three mitotic motors, cytoplasmic dynein, KLP61F, and Ncd. Specifically, our findings suggest that dynein acts to move the poles apart throughout mitosis and that this activity is augmented by KLP61F after the fenestration of the nuclear envelope, a process analogous to nuclear envelope breakdown, which occurs at the onset of prometaphase. Conversely, we find that Ncd generates forces that pull the poles together between interphase and metaphase, antagonizing the activity of both dynein and KLP61F and serving as a brake for spindle assembly. During anaphase, however, Ncd appears to have no effect on spindle pole movements, suggesting that its activity is down-regulated at this time, allowing dynein and KLP61F to drive spindle elongation during anaphase B.     

Yeast kinesin-8 depolymerizes microtubules in a length-dependent manner

The microtubule cytoskeleton and the mitotic spindle are highly dynamic structures, yet their sizes are remarkably constant, thus indicating that the growth and shrinkage of their constituent microtubules are finely balanced. This balance is achieved, in part, through kinesin-8 proteins (such as Kip3p in budding yeast and KLP67A in Drosophila) that destabilize microtubules. Here, we directly demonstrate that Kip3p destabilizes microtubules by depolymerizing them--accounting for the effects of kinesin-8 perturbations on microtubule and spindle length observed in fungi and metazoan cells. Furthermore, using single-molecule microscopy assays, we show that Kip3p has several properties that distinguish it from other depolymerizing kinesins, such as the kinesin-13 MCAK. First, Kip3p disassembles microtubules exclusively at the plus end and second, remarkably, Kip3p depolymerizes longer microtubules faster than shorter ones. These properties are consequences of Kip3p being a highly processive, plus-end-directed motor, both in vitro and in vivo. Length-dependent depolymerization provides a new mechanism for controlling the lengths of subcellular structures.     

KLP10A and KLP59C: The Dynamic Duo of Microtubule Depolymerization

Kinesin-13s are important effectors of microtubule depolymerization in cells. In a recent series of studies, we examined the roles played by kinesin-13s throughout the cell cycle in Drosophila. Our findings have revealed remarkable coordination between two family members, KLP10A and KLP59C, in which alterations in the relative targeting of these proteins allows them to participate in markedly different tasks at distinct points in the cell cycle. During mitosis, KLP10A and KLP59C function in parallel by targeting to and depolymerizing the opposite ends of kinetochore-associated microtubules, thereby driving poleward chromatid motility by a Pacman-Flux mechanism. Alternatively, during interphase, both proteins target to the same end of the microtubule but act in series to divide the labor of microtubule depolymerization. KLP10A initiates depolymerization while KLP59C perpetuates depolymerization after its initiation. Below, we detail these findings and examine some of their implications.     

Ran is required before metaphase for spindle assembly and chromosome alignment and after metaphase for chromosome segregation and spindle midbody organization

The Ran pathway has been shown to have a role in spindle assembly. However, the extent of the role of the Ran pathway in mitosis in vivo is unclear. We report that perturbation of the Ran pathway disrupted multiple steps of mitosis in syncytial Drosophila embryos and uncovered new mitotic processes that are regulated by Ran. During the onset of mitosis, the Ran pathway is required for the production, organization, and targeting of centrosomally nucleated microtubules to chromosomes. However, the role of Ran is not restricted to microtubule organization, because Ran is also required for the alignment of chromosomes at the metaphase plate. In addition, the Ran pathway is required for postmetaphase events, including chromosome segregation and the assembly of the microtubule midbody. The Ran pathway mediates these mitotic events, in part, by facilitating the correct targeting of the kinase Aurora A and the kinesins KLP61F and KLP3A to spindles.     

The Kinetochore Protein Kis1/Eic1/Mis19 Ensures the Integrity of Mitotic Spindles through Maintenance of Kinetochore Factors Mis6/CENP-I and CENP-A

Microtubules play multiple roles in a wide range of cellular phenomena, including cell polarity establishment and chromosome segregation. A number of microtubule regulators have been identified, including microtubule-associated proteins and kinases, and knowledge of these factors has contributed to our molecular understanding of microtubule regulation of each relevant cellular process. The known regulators, however, are insufficient to explain how those processes are linked to one another, underscoring the need to identify additional regulators. To find such novel mechanisms and microtubule regulators, we performed a screen that combined genetics and microscopy for fission yeast mutants defective in microtubule organization. We isolated approximately 900 mutants showing defects in either microtubule organization or the nuclear envelope, and these mutants were classified into 12 categories. We particularly focused on one mutant, kis1, which displayed spindle defects in early mitosis. The kis1 mutant frequently failed to assemble a normal bipolar spindle. The responsible gene encoded a kinetochore protein, Mis19 (also known as Eic1), which localized to the interface of kinetochores and spindle poles. We also found that the inner kinetochore proteins Mis6/CENP-I and Cnp1/CENP-A were delocalized from kinetochores in the kis1 cells and that kinetochore-microtubule attachment was defective. Another mutant, mis6, also displayed similar spindle defects. We conclude that Kis1 is required for inner kinetochore organization, through which Kis1 ensures kinetochore-microtubule attachment and spindle integrity. Thus, we propose an unexpected relationship between inner kinetochore organization and spindle integrity.     

BimC motor protein KLP61F cycles between mitotic spindles and fusomes in Drosophila germ cells.

KLP61F in Drosophila is a member of the BimC family of kinesins and, as for other family members [1], is required for spindle assembly [2] [3]. KLP61F is a bipolar homotetramer that cross-links spindle microtubules [4]. It is not known, however, whether the function of KLP61F is dedicated to mitosis or whether KLP61F interacts exclusively with microtubules. Previous work suggested that KLP61F functions during interphase in proliferating germ cells [3]. Cytokinesis is incomplete in germ cells and a branched cortical structure known as a fusome extrudes through intercellular bridges called ring canals. Here I show that, in germ cells, KLP61F cycles between spindles during mitosis and fusomes during interphase. Inspection of fusome-deficient hu-li tai shao (hts) mutants indicated that KLP61F gains fusome-dependent interactions near telophase that mediate its incorporation into these structures. KLP61F proved to be maintained in fusomes by microtubule-independent, detergent-resistant interactions. Inspection of KLP61F mutants indicated that KLP61F is required to recruit fusome material to spindle midbodies near telophase and for normal fusome organization. These observations suggest that KLP61F is bifunctional in germ cells, with microtubule-dependent functions in spindle assembly and microtubule-independent functions in fusome organization. Cytological analyses with antibodies against phosphorylated Eg5 peptide [4] suggest that cycling of KLP61F might reflect phosphorylation.