COOH-terminal truncation of flightin decreases myofilament lattice organization, cross-bridge binding, and power output in Drosophila indirect flight muscle

The indirect flight muscle (IFM) of insects is characterized by a near crystalline myofilament lattice structure that likely evolved to achieve high power output. In Drosophila IFM, the myosin rod binding protein flightin plays a crucial role in thick filament organization and sarcomere integrity. Here we investigate the extent to which the COOH terminus of flightin contributes to IFM structure and mechanical performance using transgenic Drosophila expressing a truncated flightin lacking the 44 COOH-terminal amino acids (fln(ΔC44)). Electron microscopy and X-ray diffraction measurements show decreased myofilament lattice order in the fln(ΔC44) line compared with control, a transgenic flightin-null rescued line (fln(+)). fln(ΔC44) fibers produced roughly 1/3 the oscillatory work and power of fln(+), with reduced frequencies of maximum work (123 Hz vs. 154 Hz) and power (139 Hz vs. 187 Hz) output, indicating slower myosin cycling kinetics. These reductions in work and power stem from a slower rate of cross-bridge recruitment and decreased cross-bridge binding in fln(ΔC44) fibers, although the mean duration of cross-bridge attachment was not different between both lines. The decreases in lattice order and myosin kinetics resulted in fln(ΔC44) flies being unable to beat their wings. These results indicate that the COOH terminus of flightin is necessary for normal myofilament lattice organization, thereby facilitating the cross-bridge binding required to achieve high power output for flight.     

Flightin is a myosin rod binding protein

The assembly of striated muscle myosin into thick filaments of precise and regular length requires the assistance of accessory proteins. Drosophila indirect flight muscle (IFM) contain flightin, a 20-kDa protein that has been shown to be essential for flight, for maintenance of sarcomeric integrity in active muscle, and informative in length determination of thick filaments during IFM development. Additionally, a point mutation in the myosin rod (Mhc ¹³) negates flightin accumulation in the IFM in vivo. The manner in which flightin interacts with thick filaments is not known. Here, two different solid-state binding assays demonstrate that flightin binds to myosin and to a recombinant fragment of the myosin rod that include the COOH-terminal 600 amino acids (zone 19 to tail piece). The interaction of flightin and myosin is abolished by the single amino acid substitution in Mhc ¹³ at position 1e of zone 27 of the red (residue 1554). The molar ratio of flightin to myosin is approx 1∶1 to 1∶2. Thus, the instability of thick filaments, seen in vivo in the absence of flightin suggests that the flightin-myosin interaction is critical for maintaining sarcomere integrity in active muscle.     

Mutations in Drosophila myosin rod cause defects in myofibril assembly

The roles of myosin during muscle contraction are well studied, but how different domains of this protein are involved in myofibril assembly in vivo is far less understood. The indirect flight muscles (IFMs) of Drosophila melanogaster provide a good model for understanding muscle development and function in vivo. We show that two missense mutations in the rod region of the myosin heavy-chain gene, Mhc, give rise to IFM defects and abnormal myofibrils. These defects likely result from thick filament abnormalities that manifest during early sarcomere development or later by hypercontraction. The thick filament defects are accompanied by marked reduction in accumulation of flightin, a myosin binding protein, and its phosphorylated forms, which are required to stabilise thick filaments. We investigated with purified rod fragments whether the mutations affect the coiled-coil structure, rod aggregate size or rod stability. No significant changes in these parameters were detected, except for rod thermodynamic stability in one mutation. Molecular dynamics simulations suggest that these mutations may produce localised rod instabilities. We conclude that the aberrant myofibrils are a result of thick filament defects, but that these in vivo effects cannot be detected in vitro using the biophysical techniques employed. The in vivo investigation of these mutant phenotypes in IFM development and function provides a useful platform for studying myosin rod and thick filament formation generically, with application to the aetiology of human myosin rod myopathies.     

Ultrastructure of Developing Flight Muscle in Drosophila. I. Assembly of Myofibrils

In order to evaluate the effects of specific mutations on sarcomere assembly and function in vivo, we describe the course of normal development of Drosophila indirect flight muscle (IFM) in staged pupae using electron microscopy. We find that no contractile assemblies remain in larval muscle remnants invaded by imaginal myoblasts, establishing that myofibrils in IFM assemble de novo. Stress-fiber-like structures or other template structures are not prominent before or during sarcomere assembly. By 42 hr pupation (eclosion 112 hr), thick and thin filaments have appeared simultaneously in slender, interdigitated arrays between regularly spaced Z-bodies. Each tiny, uniformly striated myofibril forms within a "sleeve" of microtubules, and both microtubules and myofibrils are attached to the cell membrane at each end of the fiber from the initial stages of assembly. Later in pupation, the microtubule "sleeves" disassemble. Sarcomere number appears to remain constant. We saw no evidence that terminal sarcomeres are sites for addition of new sarcomeres or that Z-lines split transversely, producing new, very short sarcomeres. Rather, initial thick and thin filaments and sarcomeres are much shorter than adult length. Sarcomere length increases smoothly and coordinately from 1.7 to 3.2 μm, reflecting increase in filament lengths and indicating that myosin and actin molecules must be incorporated into filaments after sarcomere formation. Myofilaments are not seen scattered in the cytoplasm at any time, nor do we detect filaments that could be in the process of being "trolleyed" along myofibrils into positions of lateral register. Myofibril diameter increases uniformly from 4-thick filaments to 36-thick filaments across, by peripheral addition of myofilaments. At each successive stage, all sarcomeres in a fiber attained similar length and diameter. Initial thick filaments are solid but within several hours these and all subsequently assembled thick filaments appear hollow. Initial Z-bodies do not show any internal lattice and are more irregularly shaped than adult Z-discs.     

Flightin Is Necessary for Length Determination, Structural Integrity, and Large Bending Stiffness of Insect Flight Muscle Thick Filaments

Despite the fundamental role of thick filaments in muscle contraction, little is known about the mechanical behavior of these filaments and how myosin-associated proteins dictate differences between muscle types. In this study, we used atomic force microscopy to study the morphological and mechanical properties of fully hydrated native thick filaments isolated from indirect flight muscle (IFM) of normal and mutant Drosophila lacking flightin (fln⁰). IFM thick filaments from newly eclosed (0-1 h old) wild-type flies have a mean length of 3.04 ± 0.05 μm. In contrast, IFM thick filaments from newly eclosed fln⁰ flies are more variable in length and, on average, are significantly longer (3.90 ± 1.33 μm) than wild-type filaments from flies of the same age. In the absence of flightin, thick filaments can attain lengths > 300% of wild-type filaments, indicating that flightin is required for setting the proper filament length in vivo. Filaments lacking flightin are structurally compromised, and filament preparations from fully matured 3- to 5-day-old adult fln⁰ IFM yielded fragments of variable length much shorter than 3.20 ± 0.04 μm, the length obtained from wild-type flies of similar age. The persistence length, an index of bending stiffness, was calculated from measurements of filament end-to-end length and contour length. We show that the presence of flightin increases persistence length by more than 40% and that wild-type filaments increase in stiffness with age. These results indicate that flightin fulfills an essential role in defining the structural and mechanical properties of IFM thick filaments.     

Assembly of thick filaments and myofibrils occurs in the absence of the myosin head

We investigated the importance of the myosin head in thick filament formation and myofibrillogenesis by generating transgenic Drosophila lines expressing either an embryonic or an adult isoform of the myosin rod in their indirect flight muscles. The headless myosin molecules retain the regulatory light-chain binding site, the alpha-helical rod and the C-terminal tailpiece. Both isoforms of headless myosin co-assemble with endogenous full-length myosin in wild-type muscle cells. However, rod polypeptides interfere with muscle function and cause a flightless phenotype. Electron microscopy demonstrates that this results from an antimorphic effect upon myofibril assembly. Thick filaments assemble when the myosin rod is expressed in mutant indirect flight muscles where no full-length myosin heavy chain is produced. These filaments show the characteristic hollow cross-section observed in wild type. The headless thick filaments can assemble with thin filaments into hexagonally packed arrays resembling normal myofibrils. However, thick filament length as well as sarcomere length and myofibril shape are abnormal. Therefore, thick filament assembly and many aspects of myofibrillogenesis are independent of the myosin head and these processes are regulated by the myosin rod and tailpiece. However, interaction of the myosin head with other myofibrillar components is necessary for defining filament length and myofibril dimensions.     

The titin A-band rod domain is dispensable for initial thick filament assembly in zebrafish

The sarcomeres of skeletal and cardiac muscle are highly structured protein arrays, consisting of thick and thin filaments aligned precisely to one another and to their surrounding matrix. The contractile mechanisms of sarcomeres are generally well understood, but how the patterning of sarcomeres is initiated during early skeletal muscle and cardiac development remains uncertain. Two of the most widely accepted hypotheses for this process include the “molecular ruler” model, in which the massive protein titin defines the length of the sarcomere and provides a scaffold along which the myosin thick filament is assembled, and the “premyofibril” model, which proposes that thick filament formation does not require titin, but that a “premyofibril” consisting of non-muscle myosin, α-actinin and cytoskeletal actin is used as a template. Each model posits a different order of necessity of the various components, but these have been difficult to test in vivo. Zebrafish motility mutants with developmental defects in sarcomere patterning are useful for the elucidation of such mechanisms, and here we report the analysis of the herzschlag mutant, which shows deficits in both cardiac and skeletal muscle. The herzschlag mutant produces a truncated titin protein, lacking the C-terminal rod domain that is proposed to act as a thick filament scaffold, yet muscle patterning is still initiated, with grossly normal thick and thin filament assembly. Only after embryonic muscle contraction begins is breakdown of sarcomeric myosin patterning observed, consistent with the previously noted role of titin in maintaining the contractile integrity of mature sarcomeres. This conflicts with the “molecular ruler” model of early sarcomere patterning and supports a titin-independent model of thick filament organization during sarcomerogenesis. These findings are also consistent with the symptoms of human titin myopathies that exhibit a late onset, such as tibial muscular dystrophy.     

Alterations in flightin phosphorylation inDrosophila flight muscles are associated with myofibrillar defects engendered by actin and myosin heavy-chain mutant alleles

Flightin is a 20-kD myofibrillar protein found in the stretch-activated flight muscles ofDrosophila melanogaster. Nine of the eleven isoelectric variants of flightin are generatedin vivo by multiple phosphorylations. The accumulation of these isoelectric variants is affected differently by mutations that eliminate thick filaments or thin filaments. Mutations in the myosin heavy-chain gene that prevent thick filament assembly block accumulation of all flightin variants except N1, the unphosphorylated precursor, which is present at much reduced levels. Mutations in the flight muscle-specific actin gene that block actin synthesis and prevent thin filament assembly disrupt the temporal regulation of flightin phosphorylation, resulting in premature phosphorylation and premature accumulation of flightin phosphovariants. Cellular fractionation of fibers that are devoid of thin filaments show that flightin remains associated with the thick filamentrich cytomatrix. These results suggest that flightin is a structural component of the thick filaments whose regulated phosphorylation is dependent upon the presence of thin filaments.This work was supported by National Science Foundation Grant IBN-9253045.     

Contribution of myosin rod protein to the structural organization of adult and embryonic muscles in Drosophila

Myosin rod protein (MRP) is a naturally occurring 155 kDa protein in Drosophila that includes the myosin heavy chain (MHC) rod domain, but contains a unique 77 amino acid residue N-terminal region that replaces the motor and light chain-binding domains of S1. MRP is a major component of myofilaments in certain direct flight muscles (DFMs) and it is present in other somatic, cardiac and visceral muscles in adults, larvae and embryos, where it is coexpressed and polymerized into thick filaments along with MHC. DFM49 has a relatively high content of MRP, and is characterized by an unusually disordered myofibrillar ultrastructure, which has been attributed to lack of cross-bridges in the filament regions containing MRP. Here, we characterize in detail the structural organization of myofibrils in adult and embryonic Drosophila muscles containing various MRP/MHC ratios and in embryos carrying a null mutation for the single MHC gene. We examined MRP in embryonic body wall and intestinal muscles as well as in DFMs with consistent findings. In DFMs numbers 49, 53 and 55, MRP is expressed at a high level relative to MHC and is associated with disorder in the positioning of thin filaments relative to thick filaments in the areas of overlap. Embryos that express MRP in the absence of MHC form thick filaments that participate in the assembly of sarcomeres, suggesting that myofibrillogenesis does not depend on strong myosin-actin interactions. Further, although thick filaments are not well ordered, the relative positioning of thin filaments is fairly regular in MRP-only containing sarcomeres, confirming the hypothesis that the observed disorder in MRP/MHC containing wild-type muscles is due to the combined action between the functional behavior of MRP and MHC myosin heads. Our findings support the conclusion that MRP has an active function to modulate the contractile activity of muscles in which it is expressed.     

Immunohistochemistry of chaetognath body wall muscles

Abstract. A light and electron immunohistochemical study was carried out on the body wall muscles of the chaetognath Sagitta friderici for the presence of a variety of contractile proteins (myosin, paramyosin, actin), regulatory proteins (tropomyosin, troponin), and structural proteins (α‐actinin, desmin, vimentin). The primary muscle (～80% of body wall volume) showed the characteristic structure of transversely striated muscles, and was comparable to that of insect asynchronous flight muscles. In addition, the body wall had a secondary muscle with a peculiar structure, displaying two sarcomere types (S1 and S2), which alternated along the myofibrils. S1 sarcomeres were similar to those in the slow striated fibers of many invertebrates. In contrast, S2 sarcomeres did not show a regular sarcomeric pattern, but instead exhibited parallel arrays of 2 filament types. The thickest filaments (～10–15 nm) were arranged to form lamellar structures, surrounded by the thinnest filaments (～6 nm). Immunoreactions to desmin and vimentin were negative in both muscle types. The primary muscle exhibited the classical distribution of muscle proteins: actin, tropomyosin, and troponin were detected along the thin filaments, whereas myosin and paramyosin were localized along the thick filaments; immunolabeling of α‐actinin was found at Z‐bands. Immunoreactions in the S1 sarcomeres of the secondary muscle were very similar to those found in the primary muscle. Interestingly, the S2 sarcomeres of this muscle were labeled with actin and tropomyosin antibodies, and presented no immunore‐actions to both myosin and paramyosin. α‐Actinin in the secondary muscle was only detected at the Z‐lines that separate S1 from S2. These findings suggest that S2 are not true sarcomeres. Although they contain actin and tropomyosin in their thinnest filaments, their thickest filaments do not show myosin or paramyosin, as the striated muscle thick myofilaments do. These peculiar S2 thick filaments might be an uncommon type of intermediate filament, which were labeled neither with desmin or vimentin antibodies.     

Flightin, a novel myofibrillar protein of Drosophila stretch-activated muscles

The indirect flight muscles of Drosophila are adapted for rapid oscillatory movements which depend on properties of the contractile apparatus itself. Flight muscles are stretch activated and the frequency of contraction in these muscles is independent of the rate of nerve impulses. Little is known about the molecular basis of these adaptations. We now report a novel protein that is found only in flight muscles and has, therefore, been named flightin. Although we detect only one gene (in polytene region 76D) for flightin, this protein has several isoforms (relative gel mobilities, 27-30 kD; pIs, 4.6-6.0). These isoforms appear to be created by posttranslational modifications. A subset of these isoforms is absent in newly emerged adults but appears when the adult develops the ability to fly. In intact muscles flightin is associated with the A band of the sarcomere, where evidence suggests it interacts with the myosin filaments. Computer database searches do not reveal extensive similarity to any known protein. However, the NH2-terminal 12 residues show similarity to the NH2- terminal sequence of actin, a region that interacts with myosin. These features suggest a role for flightin in the regulation of contraction, possibly by modulating actin-myosin interaction.     

Characterization of the myosin-based source for second-harmonic generation from muscle sarcomeres

Several biologically important protein structures give rise to strong second-harmonic generation (SHG) in their native context. In addition to high-contrast optical sections of cells and tissues, SHG imaging can provide detailed structural information based on the physical constraints of the optical effect. In this study we characterize, by biochemical and optical analysis, the critical structures underlying SHG from the complex muscle sarcomere. SHG emission arises from domains of the sarcomere containing thick filaments, even within nascent sarcomeres of differentiating myocytes. SHG from isolated myofibrils is abolished by extraction of myosin, but is unaffected by removal or addition of actin filaments. Furthermore, the polarization dependence of sarcomeric SHG is not affected by either the proportion of myosin head domains or the orientation of myosin heads. By fitting SHG polarization anisotropy readings to theoretical response curves, we find an orientation for the elemental harmonophore that corresponds well to the pitch of the myosin rod alpha-helix along the thick filament axis. Taken together, these data indicate that myosin rod domains are the key structures giving SHG from striated muscle. This study should guide the interpretation of SHG contrast in images of cardiac and skeletal muscle tissue for a variety of biomedical applications.     

Suppression of muscle hypercontraction by mutations in the myosin heavy chain gene of Drosophila melanogaster

The indirect flight muscles (IFM) of Drosophila melanogaster provide a good genetic system with which to investigate muscle function. Flight muscle contraction is regulated by both stretch and Ca(2+)-induced thin filament (actin + tropomyosin + troponin complex) activation. Some mutants in troponin-I (TnI) and troponin-T (TnT) genes cause a "hypercontraction" muscle phenotype, suggesting that this condition arises from defects in Ca(2+) regulation and actomyosin-generated tension. We have tested the hypothesis that missense mutations of the myosin heavy chain gene, Mhc, which suppress the hypercontraction of the TnI mutant held-up(2) (hdp(2)), do so by reducing actomyosin force production. Here we show that a "headless" Mhc transgenic fly construct that reduces the myosin head concentration in the muscle thick filaments acts as a dose-dependent suppressor of hypercontracting alleles of TnI, TnT, Mhc, and flightin genes. The data suggest that most, if not all, mutants causing hypercontraction require actomyosin-produced forces to do so. Whether all Mhc suppressors act simply by reducing the force production of the thick filament is discussed with respect to current models of myosin function and thin filament activation by the binding of calcium to the troponin complex.     

Fine Structure of Cardiac Sarcomeres in the Black Widow Spider Latrodectus mactans

Fine structural characteristics of the cardiac muscle and its sarcomere organization in the black widow spider, Latrodectus mactans were examined using transmission electron microscopy. The arrangement of cardiac muscle fibers was quite similar to that of skeletal muscle fibers, but they branched off at the ends and formed multiple connections with adjacent cells. Each cell contained multiple myofibrils and an extensive dyadic sarcotubular system consisting of sarcoplasmic reticulum and T‐tubules. Thin and thick myofilaments were highly organized in regular repetitive arrays and formed contractile sarcomeres. Each repeating band unit of the sarcomere had three apparent striations, but the H‐zone and M‐lines were not prominent. Myofilaments were arranged into distinct sarcomeres defined by adjacent Z‐lines with relatively short lengths of 2.0 μm to 3.3 μm. Cross sections of the A‐band showed hexagon‐like arrangement of thick filaments, but the orbit of thin filaments around each thick filament was different from that seen in other vertebrates. Although each thick filament was surrounded by 12 thin filaments, the filament ratio of thin and thick myofilaments varied from 3:1 to 5:1 because thin filaments were shared by adjacent thick filaments.     

Kettin, a major source of myofibrillar stiffness in Drosophila indirect flight muscle

Kettin is a high molecular mass protein of insect muscle that in the sarcomeres binds to actin and alpha-actinin. To investigate kettin's functional role, we combined immunolabeling experiments with mechanical and biochemical studies on indirect flight muscle (IFM) myofibrils of Drosophila melanogaster. Micrographs of stretched IFM sarcomeres labeled with kettin antibodies revealed staining of the Z-disc periphery. After extraction of the kettin-associated actin, the A-band edges were also stained. In contrast, the staining pattern of projectin, another IFM-I-band protein, was not altered by actin removal. Force measurements were performed on single IFM myofibrils to establish the passive length-tension relationship and record passive stiffness. Stiffness decreased within seconds during gelsolin incubation and to a similar degree upon kettin digestion with mu-calpain. Immunoblotting demonstrated the presence of kettin isoforms in normal Drosophila IFM myofibrils and in myofibrils from an actin-null mutant. Dotblot analysis revealed binding of COOH-terminal kettin domains to myosin. We conclude that kettin is attached not only to actin but also to the end of the thick filament. Kettin along with projectin may constitute the elastic filament system of insect IFM and determine the muscle's high stiffness necessary for stretch activation. Possibly, the two proteins modulate myofibrillar stiffness by expressing different size isoforms.     

Titin organisation and the 3D architecture of the vertebrate-striated muscle I-band

The giant muscle protein titin (connectin) is known to serve as a cytoskeletal element in muscle sarcomeres. It elastically restrains lengthening sarcomeres, it aids the integrity and central positioning of the A-band in the sarcomere and it may act as a template upon which some sarcomeric components are laid down during myogenesis. A puzzle has been how titin molecules, arranged systematically within the hexagonal A-band lattice of myosin filaments, can redistribute through the I-band to their anchoring sites in the tetragonal Z-band lattice. Recent work by Liversage and colleagues has suggested that there are six titin molecules per half myosin filament. Since there are two actin filaments per half myosin filament in a half sarcomere, this means that there are three titin molecules interacting with each Z-band unit cell containing one actin filament in the same sarcomere and one of opposite polarity from the next sarcomere. Liversage et al. suggested that the three titins might be distributed with two on an actin filament of one polarity and one on the filament of opposite polarity. Here, we build on this suggestion and discuss the transition of titin from the A-band to the Z-band. We show that there are good structural and mechanical reasons why titin might be organised as Liversage et al., suggested and we discuss the possible relationships between A-band arrangements in successive sarcomeres along a myofibril.     

Functional and ultrastructural effects of a missense mutation in the indirect flight muscle-specific actin gene of Drosophila melanogaster.

A single-site mutation of the flight-muscle-specific actin gene of Drosophila melanogaster causes a substitution of glutamic acid 93 by lysine in all the actin encoded in the indirect flight muscle (IFM). In these Act88FE93K mutants, myofibrillar bundles of thick and thin filaments are present but lack Z-discs and all sarcomeric repeats. Dense filament bundles, which are probably aberrant Z-discs, are seen in myofibrils of pupal flies, but early in adult life these move to the periphery of the fibrils and are not seen in skinned adult fibres. Consistent with this observation, alpha-actinin and other high molecular weight proteins, possibly associated with Z-discs, are not detected on SDS/polyacrylamide gels or Western blots of skinned adult IFM. The mutation lies at the beginning of a loop in the small domain of actin, near the myosin binding region. However, that the mutant actin binds myosin heads is shown by (1) rigor crossbridges in electron micrographs, (2) the appropriate rise in stiffness when ATP is withdrawn in mechanical experiments, and (3) equal protection against tryptic digestion provided by rigor binding between actin and myosin in both wild-type and mutant fibres. Reversal of rigor chevron angle along some thin filaments reflects reversal of thin-filament polarity due to lattice disorder. The absence of Z-discs, alpha-actinin and two high molecular weight proteins, and binding studies by others, suggest that the substitution at residue 93 affects the binding of the mutant actin to a protein, possibly alpha-actinin, which is necessary for Z-disc assembly or maintenance.     

Mutations that affect flightin expression in Drosophila alter the viscoelastic properties of flight muscle fibers

Striated muscles across phyla share a highly conserved sarcomere design yet exhibit broad diversity in contractile velocity, force, power output, and efficiency. Insect asynchronous flight muscles are characterized by high-frequency contraction, endurance, and high-power output. These muscles have evolved an enhanced delayed force response to stretch that is largely responsible for their enhanced oscillatory work and power production. In this study we investigated the contribution of flightin to oscillatory work using sinusoidal analysis of fibers from three flightless mutants affecting flightin expression: 1) fln⁰, a flightin null mutant, 2) Mhc¹³, a myosin rod point mutant with reduced levels of flightin, and 3) Mhc⁶, a second myosin rod point mutant with reduced levels of phosphorylated flightin. Fibers from the three mutants show deficits in their passive and dynamic viscoelastic properties that are commensurate with their effect on flightin expression and result in a significant loss of oscillatory work and power. Passive tension and passive stiffness were significantly reduced in fln⁰ and Mhc¹³ but not in Mhc⁶. The dynamic viscous modulus was significantly reduced in the three mutants, whereas the dynamic elastic modulus was reduced in fln⁰ and Mhc¹³ but not in Mhc⁶. Tension generation under isometric conditions was not impaired in fln⁰. However, when subjected to sinusoidal length perturbations, work-absorbing processes dominated over work-producing processes, resulting in no net positive work output. We propose that flightin is a major contributor to myofilament stiffness and a key determinant of the enhanced delayed force response to stretch in Drosophila flight muscles. flight muscles; muscle mutants; myosin     

The length–tension curve in muscle depends on lattice spacing

Classic interpretations of the striated muscle length–tension curve focus on how force varies with overlap of thin (actin) and thick (myosin) filaments. New models of sarcomere geometry and experiments with skinned synchronous insect flight muscle suggest that changes in the radial distance between the actin and myosin filaments, the filament lattice spacing, are responsible for between 20% and 50% of the change in force seen between sarcomere lengths of 1.4 and 3.4 µm. Thus, lattice spacing is a significant force regulator, increasing the slope of muscle''s force–length dependence.     

A mechanism for sarcomere breathing: volume change and advective flow within the myofilament lattice

During muscle contraction, myosin motors anchored to thick filaments bind to and slide actin thin filaments. These motors rely on energy derived from ATP, supplied, in part, by diffusion from the sarcoplasm to the interior of the lattice of actin and myosin filaments. The radial spacing of filaments in this lattice may change or remain constant during contraction. If the lattice is isovolumetric, it must expand when the muscle shortens. If, however, the spacing is constant or has a different pattern of axial and radial motion, then the lattice changes volume during contraction, driving fluid motion and assisting in the transport of molecules between the contractile lattice and the surrounding intracellular space. We first create an advective-diffusive-reaction flow model and show that the flow into and out of the sarcomere lattice would be significant in the absence of lattice expansion. Advective transport coupled to diffusion has the potential to substantially enhance metabolite exchange within the crowded sarcomere. Using time-resolved x-ray diffraction of contracting muscle, we next show that the contractile lattice is neither isovolumetric nor constant in spacing. Instead, lattice spacing is time varying, depends on activation, and can manifest as an effective time-varying Poisson ratio. The resulting fluid flow in the sarcomere lattice of synchronous insect flight muscles is even greater than expected for constant lattice spacing conditions. Lattice spacing depends on a variety of factors that produce radial force, including cross-bridges, titin-like molecules, and other structural proteins. Volume change and advective transport varies with the phase of muscle stimulation during periodic contraction but remains significant at all conditions. Although varying in magnitude, advective transport will occur in all cases in which the sarcomere is not isovolumetric. Akin to “breathing,” advective-diffusive transport in sarcomeres is sufficient to promote metabolite exchange and may play a role in the regulation of contraction itself.