Preparation,characterization and laboratory-scale application of an immobilized glucoamylase

Glucoamylase (1,4-α-d-glucan glucohydrolase, EC 3.2.1.3) has been covalently immobilized on a polyacrylamide-type support containing carboxylic groups activated by water-soluble carbodiimide. The activity was 5.5– 6.0 units g^?1solid. The optimum pH for catalytic activity was pH 3.8. The apparent optimum temperature was found at 60°C. With soluble starch as substrate the K_m value was 14 mg ml^?1. The pH for maximum stability was pH 4.0–4.5. In the presence of 8 m urea the immobilized glucoamylase retained most of its catalytic activity but it was more susceptible to guanidinium hydrochloride than the soluble enzyme. The practical applicability of immobilized glucoamylase was tested in batch process and continuous operation.     

Immobilization of d-glucose oxidase onto a hydrogen peroxide permselective membrane and application for an enzyme electrode

A hydrogen peroxide permselective membrane with asymmetric structure was prepared and d-glucose oxidase (EC 1.1.3.4) was immobilized onto the porous layer. The activity of the immobilized d-glucose oxidase membrane was 0.34 units cm^?2 and the activity yield was 6.8% of that of the native enzyme. Optimum pH, optimum temperature, pH stability and temperature stability were found to be pH 5.0, 30–40°C, pH 4.0–7.0 and below 55°C, respectively. The apparent Michaelis constant of the immobilized d-glucose oxidase membrane was 1.6 × 10^?3 mol l^?1 and that of free enzyme was 4.8 × 10^?2 mol l^?1. An enzyme electrode was constructed by combination of a hydrogen peroxide electrode with the immobilized d-glucose oxidase membrane. The enzyme electrode responded linearly to d-glucose over the concentration 0–1000 mg dl^?1 within 10 s. When the enzyme electrode was applied to the determination of d-glucose in human serum, within day precision (CV) was 1.29% for d-glucose concentration with a mean value of 106.8 mg dl^?1. The correlation coefficient between the enzyme electrode method and the conventional colorimetric method using a free enzyme was 0.984. The immobilized d-glucose oxidase membrane was sufficiently stable to perform 1000 assays (2 to 4 weeks operation) for the determination of d-glucose in human whole blood. The dried membrane retained 77% of its initial activity after storage at 4°C for 16 months.     

Immobilization of pig muscle 3-phosphoglycerate kinase

3-Phosphoglycerate kinase (ATP:3-phospho-d-glycerate 1-phosphotransferase, EC 2.7.2.3) has been covalently immobilized on a polyacrylamide-type support containing carboxylic groups activated by water-soluble carbodiimide. The activity was 88 units g^?1 xerogel. The activity versus pH profile showed a sharper maximum at pH 6.5 in the case of the immobilized enzyme. The immobilized enzyme had a broad apparent optimum temperature range between 40 and 50°C. The apparent K_m values of the immobilized 3-phosphoglycerate kinase were lower for both 3-phosphoglycerate and ATP than those of the soluble enzyme. In the case of the immobilized enzyme stabilities were enhanced.     

A novel method for the immobilization of glucoamylase onto polyglutaraldehyde-activated gelatin

A novel method was developed for the immobilization of glucoamylase from Aspergillus niger. The enzyme was immobilized onto polyglutaraldehyde-activated gelatin particles in the presence of polyethylene glycol and soluble gelatin, resulting in 85% immobilization yield. The immobilized enzyme has been fully active for 30 days. In addition, the immobilized enzyme retained 90 and 75% of its activity in 60 and 90 days, respectively. The enzyme optimum conditions were not affected by immobilization and the optimum pH and temperature for free and immobilized enzyme were 4 and 65 °C, respectively. The kinetic parameters for the hydrolysis of maltodextrin by free and immobilized glucoamylase were also determined. The K_m values for free and immobilized enzyme were 7.5 and 10.1 g maltodextrin/l, respectively. The V_max values for free and immobilized enzyme were estimated as 20 and 16 μmol glucose/(min μl enzyme), respectively. The newly developed method is simple yet effective and could be used for the immobilization of some other enzymes.     

Studies on Horseradish Peroxidase Immobilized onto Arylamine and Alkylamine Glass

Peroxidase from horseradish has been immobilized onto zirconia coated arylamine and alkylamine glass through the process of diazotization and glutaraldehyde coupling, respectively. Arylamine glass bound enzyme retained 77% of the initial activity with a conjugation yield of 18 mg g^-1 support, while alkylamine glass bound enzyme retained 38% of the initial activity with a conjugation yield of 16 mg g^-1 support. The immobilized enzyme showed an increase in optimum pH, temperature for maximum activity, energy of activation (Ea), and thermal stability but decrease in time for linearity and Km for H₂O₂. Vmax value of arylamlne conjugated enzyme decreased but Vmax of alkylamine conjugated enzyme was unaltered compared to free enzyme. Both arylamine and alkylamine bound enzyme showed higher stability in cold compared to that of free enzyme. The application of glass bound peroxidase in discrete analysis of serum urate is demonstrated.     

Immobilization of soybean seed coat peroxidase on polyaniline: Synthesis optimization and catalytic properties

Soybean seed coat peroxidase (SBP) was immobilized on various polyaniline-based polymers (PANI), activated with glutaraldehyde. The most reduced polymer (PANIG₂) showed the highest immobilization capacity (8.2 mg SBP?g^?1 PANIG₂). The optimum pH for immobilization was 6.0 and the maximum retention was achieved after a 6-h reaction period. The efficiency of enzyme activity retention was 82%. When stored at 4°C, the immobilized enzyme retained 80% of its activity for 15 weeks as evidenced by tests performed at 2-week intervals. The immobilized SBP showed the same pH-activity profile as that of the free SBP for pyrogallol oxidation but the optimum temperature (55°C) was 10°C below that of the free enzyme. Kinetic analysis show that the K_m was conserved while the specific V_max dropped from 14.6 to 11.4 µmol min^?1 µg^?1, in agreement with the immobilization efficiency. Substrate specificity was practically the same for both enzymes. Immobilized SBP showed a greatly improved tolerance to different organic solvents; while free SBP lost around 90% of its activity at a 50% organic solvent concentration, immobilized SBP underwent only 30% inactivation at a concentration of 70% acetonitrile. Taking into account that immobilized HRP loses more than 40% of its activity at a 20% organic solvent concentration, immobilized SBP performed much better than its widely used counterpart HRP.     

Immobilization of enzymes on crosslinked gelatin particles activated with various forms and complexes of titanium(IV) species

A number of methods of activating the surface of glutaraldehyde crosslinked gelatin beads with titanium(IV) compounds, for subsequent enzyme coupling, have been investigated. Glucoamylase (exo-1,4-α-d-glucosidase, EC 3.2.1.3) was so immobilized using titanium(IV)-urea, -acrylamide, -citric acid and -lactose complexes; however, immobilized enzyme preparations with low activities were obtained (0.36–1.28 U g^?1). Activation with uncomplexed titanium(IV) chloride, however, of both moist and freeze-dried crosslinked gelatin particles resulted in highly active immobilized glucoamylase preparations (1.74–26.6 U g^?1). Dual immobilized enzyme conjugates of glucoamylase and invertase (β-d-fructofuranosidase, EC 3.2.1.26) were also prepared using this method. Invertase was served on the entrapped enzyme while glucoamylase was coupled on the surface of titanium(IV)-activated gelatin pre-entrapped invertase particles. A dual gelatin coupled glucoamylase/gelatin entrapped glucoamylase was prepared (3.8 U g^?1) and ～72.5% of the total combined activity was due to the surface bound enzyme.     

Immobilization and characterisation of a lipase from a new source, Bacillus sp. ITP-001

A new source of lipase from Bacillus sp. ITP-001 was immobilized by physical adsorption on the polymer poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) in aqueous solution. The support and immobilized lipase were characterised, compared to the lyophilised lipase, with regard to the specific surface area, adsorption–desorption isotherms, pore volume (Vp) and size (dp) by nitrogen adsorption, differential scanning calorimetry, thermogravimetric analysis, chemical composition analysis, Fourier transform infrared spectroscopy and biochemical properties. The immobilized enzyme displayed a shift in optimum pH towards the acidic side with an optimum at pH 4.0, whereas the optimum pH for the free enzyme was at pH 7.0; the optimum temperature of activity was 80 and 37 °C for the free and immobilized enzyme, respectively. The inactivation rate constant for the immobilized enzyme at 37 °C was 0.0038 h^?1 and the half-life was 182.41 h. The kinetic parameters obtained for the immobilized enzyme gave a Michaelis–Menten constant (K _m) of 49.10 mM and a maximum reaction velocity (V _max) of 205.03 U/g. Furthermore, the reuse of the lipase immobilized by adsorption allowed us to observe that it could be reused for 10 successive cycles, duration of each cycle (1 h), maintaining 33 % of the initial activity.     

Development of Bed Reactor Using Brick Dust Immobilized CIVI-Cellulase from Seeds of Cowpea (Vigna sinensis L)

Cellulase extracted from seeds of Cowpea (Vigna sinensis L var VITA-4) was partially purified and immobilized on brick dust as solid support via glutaraldehyde. The percentage retention of the enzyme activity on brick dust was nearly 85%. After immobilization specific activity of the enzyme increased from 0.275 to 0.557 U mg^?1 protein with about 2 fold enrichment. The optimum pH and temperature of soluble enzyme were determined as pH 4.6 and WC, respectively whereas immobilized enzyme showed at pH 5.0 and 37°C, respectively. The V_max values for soluble and immobilized enzyme were determined as 6.67 and 1.25 mg min^?1, respectively whereas K_m values were 4.35 and 4.76 mg ml^?1, respectively. The immobilized enzyme displayed higher thermal stability than soluble enzyme and retained about 50% of its initial activity after 12 reuses. Immobilized enzyme was packed in an indigenously designed double walled glass bed reactor for continuous production of reducing sugars.     

Immobilization of apricot pectinesterase (Prunus armeniaca L.) on porous glass beads and its characterization

Pectinesterase isolated from Malatya apricot pulp was covalently immobilized onto glutaraldehyde-containing amino group functionalized porous glass beads surface by chemical immobilization at pH 8.0. The amount of covalently bound apricot PE was found 1.721 mg/g glass support. The properties of immobilized enzyme were investigated and compared to those of free enzyme. The effect of various parameters such as pH, temperature, activation energy, heat and storage stability on immobilized enzyme were investigated. Optimum pH and temperature were determined to be 8.0 and 50 °C, respectively. The immobilized PE exhibited better thermostability than the free one. Kinetic parameters of the immobilized enzyme (K_m and V_max values) were also evaluated. The K_m was 0.71 mM and the V_max was 0.64 μmol min^?1 mg^?1. No drastic change was observed in the K_m and V_max values. The patterns of heat stability indicated that the immobilization process tends to stabilize the enzyme. Thermal and storage stability experiments were also carried out. It was observed that the immobilized enzyme had longer storage stability and retained 50% of its initial activity during 30 days.     

Immobilization of Kluyveromyces marxianus cells containing inulinase activity in open pore gelatin matrix: 1. Preparation and enzymatic properties

Kluyveromyces marxianus cells with inulinase (2,1-β-d-fructan fructanohydrolase, EC 3.2.1.7) activity have been immobilized in open pore gelatin pellets with retention of > 90% of the original activity. The open pore gelatin pellets with entrapped yeast cells were obtained by selective leaching out of calcium alginate from the composite matrix, followed by crosslinking with glutaraldehyde. Enzymatic properties of the gelatin-entrapped cells were studied and compared with those of the free cells. The immobilization procedure did not alter the optimum pH of the enzymatic preparation; the optimum for both free and immobilized cells was pH 6.0. The optimum temperature of inulin hydrolysis was 10°C higher for immobilized cells. Activation energies for the reaction with the free and immobilized cells were calculated to be 6.35 and 2.26 kcal mol^?1, respectively. K_m values were 8 mM inulin for the free cells and 9.52 mM for the immobilized cells. The thermal stability of the enzyme was improved by immobilization. Free and immobilized cells showed fairly stable activities between pH 4 and 7, but free cell inulinase was more labile at pH values below 4 and above 7 compared to the immobilized form. There was no loss of enzyme activity of the immobilized cells on storage at 4°C for 30 days. Over the same period at room temperature only 6% of the original activity was lost.     

Investigation of the operational stabilities and kinetics of glucoamylase immobilized on alkylamine derivatives of titanium(IV)-activated porous inorganic supports

Glucoamylase (exo-1,4-α-d-glucosidase, EC 3.2.3.1) was coupled to several porous silica matrices by an improved metal-link/chelation process using alkylamine derivatives of titanium(IV)-activated supports. In order to select the titanium activation procedure which gave stable enzyme preparations, long-term stability tests were performed. The immobilized glucoamylase preparations, in which the carrier was activated to dryness with a 15% w/v TiCl₄ solution, displayed very stable behaviour, with half-lives of ～60 days. The optimum operating conditions were determined for these preparations. There are significant differences between the behaviour of the immobilized enzyme and the free enzyme. The apparent K_m increased on immobilization due to diffusional resistances. The pH optimum for the immobilized preparation showed a slight shift to acid pH relative to that of the soluble enzyme. Also, the optimum temperature descreased to 60°C after immobilization. In order to test Michaelis-Menten kinetics at high degrees of conversion, time-course analysis of soluble starch hydrolysis was performed. It was observed that simple Michaelis-Menten kinetics are not applicable to the free/immobilized glucoamylase-starch system at high degrees of conversion.     

Immobilization of Bacillus licheniformis 5A1 milk-clotting enzyme and characterization of its enzyme properties

Milk-clotting enzyme from Bacillus licheniformis 5A1 was immobilized on Amberlite IR-120 by ionic binding. Almost all the enzyme activity was retained on the support. The immobilized milk-clotting enzyme was repeatedly used to produce cheese in a batch reactor. The production of cheese was repeated 5 times with no loss of activity. The specific activity calculated on a bound-protein basis was slightly higher than that of free enzyme. The free and immobilized enzyme were highly tolerant to repeated freezing and thawing. The optimum temperature for milk-clotting activity was 70 °C with the free enzyme whereas, it was ranged from 70 to 80 °C with the immobilized milk-clotting enzyme. The activation energy (E _A) of the immobilized milk-clotting enzyme was lower than the free enzyme (E _A = 1.59 and 1.99 Kcal mol⁻¹ respectively). The immobilized milk-clotting enzyme exhibited great thermal stability. The milk-clotting optimum pH was 7.0 for both free and immobilized enzyme. The Michaelis constant K _m of the immobilized milk-clotting enzyme was slightly lower than the free enzyme.     

Immobilization of catalase on cotton fabric oxidized by sodium periodate

Cotton fabric was first oxidized with sodium periodate, and then employed to immobilize catalase. Optimization studies for oxidation of the fabric and immobilization of the enzyme were performed. The properties of the immobilized catalase were examined and compared with those of the free enzyme. A high activity of the immobilized enzyme was obtained when the fabric was oxidized at 40°C and pH 6.0 for 8h in a bath containing 0.20 mol L^?1 sodium periodate and the enzyme was immobilized at 4°C for 24h with a catalase dosage of 120.0 U mL^?1. The immobilized enzyme exhibited optimum activity at 40°C, while the free enzyme had optimal temperature of 30°C, suggesting that the immobilized catalase could be used in a broader temperature range. Both the immobilized and free enzyme had pH optima of 7.0. The staining test and reusability showed that the catalase was fixed covalently on the oxidized cotton fabric.     

Inversion of sucrose with β-d-fructofuranosidase (invertase) immobilized on bead DEAHP-cellulose: Batch process

The inversion of sucrose with β-d-fructofuranosidase (EC 3.2.1.26) immobilized by an ionic bond on bead cellulose containing weak basic N,N-diethylamino-2-hydroxypropyl groups has been investigated. The immobilized enzyme is strongly bound at an ionic strength up to 0.1 M in the pH range 3–6. The amount adsorbed is proportional to porosity and to the exchange capacity of the ion exchange cellulose, reaching values up to 200 mg/g dry carrier, with an activity in 10% sucrose solution at 30°C, pH 5, >8000 μmol min^?1 g^?1. The inversion of sucrose with immobilized β-d-fructofuranosidase was carried out in a stirred reactor. The dependence of activity on pH (3–7), temperature (0–70°C) and concentration of the substrate (2–64 wt%) were determined, and the inversion was compared with that obtained using non-immobilized enzyme under similar conditions. The rate of inversion at low substrate concentration (2–19 wt%) was described by Michaelis-Menten kinetics.     

A stable immobilized d-psicose 3-epimerase for the production of d-psicose in the presence of borate

Maximal activity of the immobilized d-psicose 3-epimerase from Agrobacterium tumefaciens on Duolite A568 beads was achieved at pH 9.0 and 55 °C with borate, and at pH 8.5 and 50 °C without borate. The half-lives of the immobilized enzyme at 50 °C with and without borate were increased 4.2- and 128-fold compared to that of the free enzyme without borate, respectively. The immobilized enzyme with borate produced 441 g l^?1 psicose from 700 g l^?1 fructose at pH 9.0 and 55 °C, whereas 193 g l^?1 psicose was produced without borate at pH 8.5 and 50 °C after 120 min in a batch reaction. The immobilized enzyme in a packed-bed bioreactor without borate was produced continuously 325 g l^?1 psicose from 500 g l^?1 fructose at a dilution rate of 1.62 h^?1 over a 236 h period with productivity of 527 g l^?1 h^?1 while that without borate produced 146 g l^?1 psicose at 4.15 h^?1 over a 384-h period with productivity of 606 g l^?1 h^?1. The operational half-lives of the enzyme with and without borate in the bioreactor were 601 and 645 h, respectively. In the present study, psicose was produced stably with high productivity using the immobilized d-psicose 3-epimerase in the presence of borate.     

Preparation and properties of an immobilized cellulase on the reversibly soluble matrix Eudragit L-100

Abstract

To prepare a smart biocatalyst, cellulase was immobilized on the reversibly soluble matrix Eudragit L-100 by non-covalent and covalent methods. Covalent immobilization using carbodiimide coupling exhibited superior enzyme loading and reusability compared with non-covalent immobilization, and the covalent loading was increased by almost 20% through the addition of N-hydroxysuccinimide. The temperature optimum of the cellulase was not improved apparently by immobilization but the pH optimum increased from 4.75 to 5.25. Immobilized cellulase was more active than free cellulase above pH 5.0. Immobilized cellulase was more stable than free cellulase during storage at 4°C, room temperature and 50°C. K_m values of immobilized and free cellulase were 85.55 and 73.84 g L^?1, respectively. About 50% productivity was retained after five cycles for hydrolysis of steam-exploded straw.     

Cobra venom phospholipase A2 immobilized to porocus glass beads.

Phospholipase A₂ (EC 3.1.1.4) from cobra venom (Naja naja naja) has been covalently immobilized to aryl amine porous glass beads by diazo coupling. The attachment of the enzyme to the glass beads is apparently through tyrosine. The activity of the immobilized enzyme toward phospholipid substrate has been monitored using the Triton X-100/phospholipid mixed micelle assay system. The activity of the immobilized phospholipase A₂ toward phosphatidylcholine is about 160 μmol min^?1 ml^?1 of glass beads, and the specific activity is about 13 μmol min^?1 mg^?1 of protein in this assay system. The pH rate profile and apparent pK_a in 10 mm Ca²⁺ of the immobilized enzyme parallels that of the soluble enzyme. The substrate specificity of the immobilized enzyme toward individual phospholipid species in mixed micelles is phosphatidylcholine ? phosphatidylethanolamine. In binary lipid mixtures in mixed micelles containing phosphatidylcholine and phosphatidylethanolamine together, a reversal in specificity is observed, and phosphatidylethanolamine is the preferred substrate. This unusual specificity reversal in binary mixtures is also observed for the soluble enzyme. The activity of the immobilized enzyme toward phospholipid inserted in mixed micelles is the same as toward a synthetic phospholipid which forms monomers, while a 20-fold decrease in activity toward monomeric substrate is observed for the soluble enzyme. The immobilized enzyme is stable at temperatures of 90 °C as is the soluble enzyme. However, p-bromphenacyl bromide, a reagent which inactivates the soluble enzyme, does not inactivate the immobilized enzyme. The immobilized enzyme can be stored frozen for several months and is reusable. The mechanism of action of immobilized phospholipase A₂ from cobra venom and the potential usefullness of the bound enzyme as a probe for phospholipids in surfaces of membranes is considered.     

Kinetic and microstructural characterization of immobilized penicillin acylase from Streptomyces lavendulae on Sepabeads EC-EP

Recombinant penicillin acylase from Streptomyces lavendulae was covalently bound to epoxy-activated Sepabeads EC-EP303®. Optimization of the immobilization process led to a homogeneous distribution of the enzyme on the support surface avoiding the attachment of enzyme aggregates, as shown by confocal electron microscopy. The optimal immobilized biocatalyst had a specific enzymatic activity of 26.2IUgwetcarrier^?1 in the hydrolysis of penicillin V at pH 8.0 and 40°C. This biocatalyst showed the highest activity at pH 8.5 and 65°C, 1.5 pH units lower and 5°C higher than its soluble counterpart. Substrate specificity of the derivative also showed its ability to efficiently hydrolyze other natural aliphatic penicillins such as penicillins K, F and dihydroF. The immobilized enzyme was highly stable at 40°C and pH 8.0 (t_1/2=625 h vs. t_1/2=397 h for the soluble enzyme), and it could be recycled for at least 30 consecutive batch reactions without loss of catalytic activity.