Insertion of bacteriophage phiFSW into the chromosome of Lactobacillus casei strain Shirota (S-1): characterization of the attachment sites and the integrase gene

The integrase gene (int) on the genome of φFSW, which is a temperate bacteriophage of Lactobacillus casei strain Shirota (formerly denoted as S-1), and the four attachment sites on the genomes of the phage and its host were characterized by sequencing. The φFSW integrase was found to belong to the integrase family of site-specific tyrosine recombinase. The attachment sites shared a 40bp common core within which an integrative site-specific recombination occurs. The common core was flanked on one side by an additional segment of high sequence similarity. An integration plasmid, consisting of int, the phage attachment site (attP), and a selectable marker, inserted stably into the bacterial attachment site (attB) within the common core, as did the complete prophage genome at a frequency of more than 10(3)/microg of plasmid DNA. This plasmid was used as a test system for a preliminary mutational analysis of int and attP. The attB common core was located within and near the end of an open reading frame that appears to encode a homolog to glucose 6-phosphate isomerase, an enzyme of the glycolytic pathway. It is unlikely that the prophage integration inactivates this protein, since a change of only the C-terminal amino acid is predicted because of the sequence similarity between attP and attB.     

Control of directionality in the site-specific recombination system of the Streptomyces phage phiC31

The genome of the Streptomyces temperate phage phiC31 integrates into the host chromosome via a recombinase belonging to a novel group of phage integrases related to the resolvase/invertase enzymes. Previously, it was demonstrated that, in an in vitro recombination assay, phiC31 integrase catalyses integration (attP/attB recombination) but not excision (attL/attR). The mechanism responsible for this recombination site selectivity was therefore investigated. Purified integrase was shown to bind with similar apparent binding affinities to between 46 bp and 54 bp of DNA at each of the attachment sites, attP, attB, attL and attR. Assays using recombination sites of 50 bp and 51 bp for attP and attB, respectively, showed that these fragments were functional in attP/attB recombination and maintained strict site selectivity, i.e. no recombination between non-permissive sites, such as attP/attP, attB/attL, etc., was observed. Using bandshifts and supershift assays in which permissive and non-permissive combinations of att sites were used in the presence of integrase, only the attP/attB combination could generate supershifts. Recombination products were isolated from the supershifted complexes. It was concluded that these supershifted complexes contained the recombination synapse and that site specificity, and therefore directionality, is determined at the level of stable synapse formation.     

Characterization of genetic elements required for site-specific integration of Lactobacillus delbrueckii subsp. bulgaricus bacteriophage mv4 and construction of an integration-proficient vector for Lactobacillus plantarum.

Temperate phage mv4 integrates its DNA into the chromosome of Lactobacillus delbrueckii subsp. bulgaricus strains via site-specific recombination. Nucleotide sequencing of a 2.2-kb attP-containing phage fragment revealed the presence of four open reading frames. The larger open reading frame, close to the attP site, encoded a 427-amino-acid polypeptide with similarity in its C-terminal domain to site-specific recombinases of the integrase family. Comparison of the sequences of attP, bacterial attachment site attB, and host-phage junctions attL and attR identified a 17-bp common core sequence, where strand exchange occurs during recombination. Analysis of the attB sequence indicated that the core region overlaps the 3' end of a tRNA(Ser) gene. Phage mv4 DNA integration into the tRNA(Ser) gene preserved an intact tRNA(Ser) gene at the attL site. An integration vector based on the mv4 attP site and int gene was constructed. This vector transforms a heterologous host, L. plantarum, through site-specific integration into the tRNA(Ser) gene of the genome and will be useful for development of an efficient integration system for a number of additional bacterial species in which an identical tRNA gene is present.     

Bacteriophage T12 of Streptococcus pyogenes integrates into the gene encoding a serine tRNA

The region of temperate bacteriophage T12 responsible for integration into the chromosome of Streptococcus pyogenes has been identified. The integrase gene ( int ) and the phage attachment site ( attP ) are found immediately upstream of the gene for speA , the latter of which is known to be responsible for the production of erythrogenic toxin A (also known as pyrogenic exotoxin A). The integrase gene has a coding capacity for a protein of 41 457 Da, and the C-terminus of the deduced protein is similar to other conserved C-terminal regions typical of phage integrases. Upstream of int is a second open reading frame, which is capable of encoding an acidic protein of 72 amino acids (8744 Da); the position of this region in relation to int suggests it to be the phage excisionase gene ( xis ). The arms flanking the integrated prophage ( attL and attR ) were identified, allowing determination of the sequences of the phage ( attP ) and bacterial ( attB ) attachment sites. A fragment containing the integrase gene and attP was cloned into a streptococcal suicide vector; when introduced into S. pyogenes by electrotransformation, this plasmid stably integrated into the bacterial chromosome at attB . The insertion site for the phage into the S. pyogenes chromosome was found to be in the anticodon loop of a putative type II gene for a serine tRNA. attP and attB share a region of identity that is 96 bp in length; this region of identity corresponds to the 3' end of the tRNA gene such that the coding sequence remains intact after integration of the prophage. The symmetry of the core region of att may set this region apart from previously described phage attachment sites (Campbell, 1992), and may play a role in the biology of this medically important bacteriophage.     

Characterization of site-specific recombination by the integrase MJ1 from enterococcal bacteriophage phiFC1

Bacteriophage phiFC1 integrase (MJ1) was previously shown to perform a site-specific recombination between a phage attachment site (attP) and a host attachment site (attB) in its host, Enterococcus faecalis, and also in a non-host bacterium, Escherichia coli. Here, we investigated biochemical features of MJ1 integrase. First, MJ1 integrase could perform in vitro recombination between attP and attB in the absence of additional factors. Second, MJ1 integrase interacted with att sites. Electrophoretic mobility shift assays and DNase I footprinting revealed that MJ1 integrase could efficiently bind to all the att sites and that MJ1 integrase recognized relatively short sequences (approximately 50 bp) containing an overlapping region within attB and attP. These results demonstrate that MJ1 integrase indeed catalyzes an integrative recombination between attP and attB, the mechanism of which might be simple and unidirectional, as found in serine integrases.     

Defective site-specific integration elements are present in the genome of virulent bacteriophage LL-H of Lactobacillus delbrueckii.

The phage attachment site, attP, and the integrase-encoding gene, int, are sufficient to promote site-specific integration of the temperate phage mv4 genome into the chromosome of the Lactobacillus delbrueckii host (L. Dupont, B. Boizet-Bonhoure, M. Coddeville, F. Auvray, and P. Ritzenthaler, J. Bacteriol. 177:586--595, 1995). The mv4 genome region containing these elements was compared at the nucleotide and amino acid levels with that of the closely related virulent phage LL-H. Complex DNA rearrangements were identified; a truncated integrase gene and two sites homologous to the mv4 attP site were detected in the genome of the virulent phage LL-H. These observations suggest that the two phages derive from a common temperate ancestor.     

Site-Specific Recombination of Temperate Myxococcus xanthus Phage Mx8: Regulation of Integrase Activity by Reversible, Covalent Modification

Temperate Myxococcus xanthus phage Mx8 integrates into the attB locus of the M. xanthus genome. The phage attachment site, attP, is required in cis for integration and lies within the int (integrase) coding sequence. Site-specific integration of Mx8 alters the 3' end of int to generate the modified intX gene, which encodes a less active form of integrase with a different C terminus. The phage-encoded (Int) form of integrase promotes attP x attB recombination more efficiently than attR x attB, attL x attB, or attB x attB recombination. The attP and attB sites share a common core. Sequences flanking both sides of the attP core within the int gene are necessary for attP function. This information shows that the directionality of the integration reaction depends on arm sequences flanking both sides of the attP core. Expression of the uoi gene immediately upstream of int inhibits integrative (attP x attB) recombination, supporting the idea that uoi encodes the Mx8 excisionase. Integrase catalyzes a reaction that alters the primary sequence of its gene; the change in the primary amino acid sequence of Mx8 integrase resulting from the reaction that it catalyzes is a novel mechanism by which the reversible, covalent modification of an enzyme is used to regulate its specific activity. The lower specific activity of the prophage-encoded IntX integrase acts to limit excisive site-specific recombination in lysogens carrying a single Mx8 prophage, which are less immune to superinfection than lysogens carrying multiple, tandem prophages. Thus, this mechanism serves to regulate Mx8 site-specific recombination and superinfection immunity coordinately and thereby to preserve the integrity of the lysogenic state.     

Purification and characterization of the integrase from the Haemophilus influenzae bacteriophage HP1; identification of a four-stranded intermediate and the order of strand exchange

The integrase encoded by the temperate phage HP1 promotes the site-specific recombination between DNA sites on its genome (the attP site) and on the genome of the host Haemophilus influenzae (the attB site). The protein has been overproduced in Escherichia coli , and purified to apparent homogeneity. HP1 integrase promotes recombination of supercoiled attP -containing molecules with linear segments with attB sites. Reaction was enhanced by spermidine and by the bacterial DNA-bending protein integration host factor. The rate of recombination showed complex and related dependence upon the integrase concentration and the concentration of the supercoiled attP substrate. These relationships probably originate from the need to assemble a multi-protein complex on the attP DNA. The reaction promoted by HP1 integrase produced a four-stranded initial reaction product in which one pair of DNA strands had undergone transfer while the other pair remained intact. This four-stranded component was produced more rapidly than any product, and its steady-state level was proportional to the overall rate of reaction. This component had the kinetic and structural properties of an intermediate in the recombination reaction. The existence of this intermediate was used to determine that the two strand exchanges required for recombination of the duplex substrates proceed in a defined order.     

Genomic organization and molecular characterization of Clostridium difficile bacteriophage PhiCD119

In this study, we have isolated a temperate phage (PhiCD119) from a pathogenic Clostridium difficile strain and sequenced and annotated its genome. This virus has an icosahedral capsid and a contractile tail covered by a sheath and contains a double-stranded DNA genome. It belongs to the Myoviridae family of the tailed phages and the order Caudovirales. The genome was circularly permuted, with no physical ends detected by sequencing or restriction enzyme digestion analysis, and lacked a cos site. The DNA sequence of this phage consists of 53,325 bp, which carries 79 putative open reading frames (ORFs). A function could be assigned to 23 putative gene products, based upon bioinformatic analyses. The PhiCD119 genome is organized in a modular format, which includes modules for lysogeny, DNA replication, DNA packaging, structural proteins, and host cell lysis. The PhiCD119 attachment site attP lies in a noncoding region close to the putative integrase (int) gene. We have identified the phage integration site on the C. difficile chromosome (attB) located in a noncoding region just upstream of gene gltP, which encodes a carrier protein for glutamate and aspartate. This genetic analysis represents the first complete DNA sequence and annotation of a C. difficile phage.     

The streptomyces genome contains multiple pseudo-attB sites for the (phi)C31-encoded site-specific recombination system

The integrase from the Streptomyces phage (phi)C31 is a member of the serine recombinase family of site-specific recombinases and is fundamentally different from that of lambda or its relatives. Moreover, (phi)C31 int/attP is used widely as an essential component of integration vectors (such as pSET152) employed in the genetic analysis of Streptomyces species. phiC31 or integrating plasmids containing int/attP have been shown previously to integrate at a locus, attB, in the chromosome. The DNA sequences of the attB sites of various Streptomyces species revealed nonconserved positions. In particular, the crossover site was narrowed to the sequence 5'TT present in both attP and attB. Strains of Streptomyces coelicolor and S. lividans were constructed with a deletion of the attB site ((Delta)attB), and pSET152 was introduced into these strains by conjugation. Thus, secondary or pseudo-attB sites were identified by Southern blotting and after rescue of plasmids containing DNA flanking the insertion sites from the chromosome. The sequences of the integration sites had similarity to those of attB. Analysis of the insertions of pSET152 into both attB(+) and (Delta)attB strains indicated that this plasmid can integrate at several loci via independent recombination events within a transconjugant.     

Characterization of genetic elements required for site-specific integration of the temperate lactococcal bacteriophage phi LC3 and construction of integration-negative phi LC3 mutants.

The genetic elements required for the integration of the temperate lactococcal bacteriophage phi LC3 into the chromosome of its bacterial host, Lactococcus lactis subsp. cremoris, were identified and characterized. The phi LC3 phage attachment site, attP, was mapped and sequenced. DNA sequence analysis of attP and of the bacterial attachment site, attB, as well as the two phage-host junctions, attR and attL, in the chromosome of a phi LC3 lysogen, identified a 9-bp common core region, 5'-TTCTTCATG'-3, within which the strand exchange reaction takes place during integration. The attB core sequence is located within the C-terminal part of an open reading frame of unknown function. The phi LC3 integrase gene (int), encoding the phi LC3 site-specific recombinase, was identified and is located adjacent to attP. The phi LC3 Int protein, as deduced from the nucleotide sequence, is a basic protein of 374 amino acids that shares significant sequence similarity with other site-specific recombinases of the integrase family. Phage phi LC3 int- and int-attP-defective mutants, conferring an abortive lysogenic phenotype, were constructed.     

Identification of int and attP on the genome of lactococcal bacteriophage Tuc2009 and their use for site-specific plasmid integration in the chromosome of Tuc2009-resistant Lactococcus lactis MG1363.

The DNA sequence of the int-attP region of the small-isometric-headed lactococcal bacteriophage Tuc2009 is presented. In this region, an open reading frame, int, which potentially encodes a protein of 374 amino acids, representing the Tuc2009 integrase, was identified. The nucleotide sequence of the bacteriophage attachment site, attP, and the sequences of attB, attL, and attR in the lysogenic host Lactococcus lactis subsp. cremoris UC509 were determined. A sequence almost identical to the UC509 attB sequence was found to be present in the plasmid-free Tuc2009-resistant L. lactis subsp. cremoris MG1363. This site could be used for the site-specific integration of a plasmid carrying the Tuc2009 int-attP region in the chromosome of MG1363, thereby demonstrating that the application of chromosomal insertion vectors based on bacteriophage integration functions is not limited to the prophage-cured original host strain of the phage.     

Integration of satellite bacteriophage P4 in Escherichia coli. DNA sequences of the phage and host regions involved in site-specific recombination

We determined the DNA sequences of regions essential for bacteriophage P4 integration. A 20 base-pair core sequence in both phage (P4attP) and host (P4attB) attachment regions contains the recombination site. In P4attP this sequence is flanked by five repeated sequences. A 1.3 x 10(3) base open reading frame codes for P4 integrase. Two possible promoters are upstream from P4int. One would be recognized by Escherichia coli RNA polymerase and may be repressed by integrase protein. The second would be recognized by RNA polymerase modified after infection by a P4 helper phage, P2. The P4attB core sequence is the 3' end of a leucine tRNA gene. Downstream from this tRNA in E. coli K-12 is a region homologous to P4int that may be part of a cryptic prophage.     

Gene insertion and replacement in Schizosaccharomyces pombe mediated by the Streptomyces bacteriophage phiC31 site-specific recombination system

The site-specific recombination system used by the Streptomyces bacteriophage phiC31 was tested in the fission yeast Schizosaccharomyces pombe. A target strain with the phage attachment site attP inserted at the leu1 locus was co-transformed with one plasmid containing the bacterial attachment site attB linked to a ura4+ marker, and a second plasmid expressing the phiC31 integrase gene. High-efficiency transformation to the Ura+ phenotype occurred when the integrase gene was expressed. Southern analysis revealed that the attB-ura4+ plasmid integrated into the chromosomal attP site. Sequence analysis showed that the attBxattP recombination was precise. In another approach, DNA with a ura4+ marker flanked by two attB sites in direct orientation was used to transform S. pombe cells bearing an attP duplication. The phiC31 integrase catalyzed two reciprocal cross-overs, resulting in a precise gene replacement. The site-specific insertions are stable, as no excision (the reverse reaction) was observed on maintenance of the integrase gene in the integrant lines. The irreversibility of the phiC31 site-specific recombination system sets it apart from other systems currently used in eukaryotic cells, which reverse readily. Deployment of the phiC31 recombination provides new opportunities for directing transgene and chromosome rearrangements in eukaryotic systems.     

Identification of Site-Specific Recombination Genes int and xis of the Rhizobium Temperate Phage 16-3

Phage 16-3 is a temperate phage of Rhizobium meliloti 41 which integrates its genome with high efficiency into the host chromosome by site-specific recombination through DNA sequences of attB and attP. Here we report the identification of two phage-encoded genes required for recombinations at these sites: int (phage integration) and xis (prophage excision). We concluded that Int protein of phage 16-3 belongs to the integrase family of tyrosine recombinases. Despite similarities to the cognate systems of the lambdoid phages, the 16-3 int xis att system is not active in Escherichia coli, probably due to requirements for host factors that differ in Rhizobium meliloti and E. coli. The application of the 16-3 site-specific recombination system in biotechnology is discussed.     

Site-Specific Recombination of Temperate Myxococcus xanthus Phage Mx8: Genetic Elements Required for Integration

Like most temperate bacteriophages, phage Mx8 integrates into a preferred locus on the genome of its host, Myxococcus xanthus, by a mechanism of site-specific recombination. The Mx8 int-attP genes required for integration map within a 2.2-kilobase-pair (kb) fragment of the phage genome. When this fragment is subcloned into a plasmid vector, it facilitates the site-specific integration of the plasmid into the 3' ends of either of two tandem tRNAAsp genes, trnD1 and trnD2, located within the attB locus of the M. xanthus genome. Although Int-mediated site-specific recombination occurs between attP and either attB1 (within trnD1) or attB2 (within trnD2), the attP x attB1 reaction is highly favored and often is accompanied by a deletion between attB1 and attB2. The int gene is the only Mx8 gene required in trans for attP x attB recombination. The int promoter lies within the 106-bp region immediately upstream of one of two alternate GTG start codons, GTG-5208 (GTG at bp 5208) and GTG-5085, for integrase and likely is repressed in the prophage state. All but the C-terminal 30 amino acid residues of the Int protein are required for its ability to mediate attP x attB recombination efficiently. The attP core lies within the int coding sequence, and the product of integration is a prophage in which the 3' end of int is replaced by host sequences. The prophage intX gene is predicted to encode an integrase with a different C terminus.     

Integration of the temperate phage phiU into the putative tRNA gene on the chromosome of its host Rhizobium leguminosarum biovar trifolii

The plasmid pCI6, carrying the attP site of the temperate phage phiU, integrates into the attB site on the chromosome of Rhizobium leguminosarum biovar trifolii strain 4S. The 4 kb EcoRI-HindIII region of pCI6 involved in site-specific integration was subcloned as the attP fragment of phage phiU and sequenced. The attL fragment, one of the new DNA junctions generated from the insertion of pCI6 into the chromosome of the host Rhizobium, was used as a hybridization probe for isolation of the attB fragment of strain 4S. The nucleotide sequence of the 2 kb PstI fragment of strain 4S, which hybridized with the attL fragment, was decided and compared with that of the attP fragment. A 53 bp common sequence was expected to be the core sequence of site-specific integration between phage phiU and strain 4S. One of the ORFs on the attP fragment, which was located adjacent to the core sequence, had structural homology to the integrase family. However, the attB fragment showed high homology with the tRNA genes of Agrobacterium tumefaciens and E. coli. A 47 bp sequence of the 53 bp core sequence overlapped with this tRNA-like sequence. This indicates that the target site of phage phiU integration is the putative tRNA gene on the chromosome of the Rhizobium host.     

Unusual structure of the attB site of the site-specific recombination system of Lactobacillus delbrueckii bacteriophage mv4

The temperate phage mv4 integrates its genome into the chromosome of Lactobacillus delbrueckii subsp. bulgaricus by site-specific recombination within the 3' end of a tRNA(Ser) gene. Recombination is catalyzed by the phage-encoded integrase and occurs between the phage attP site and the bacterial attB site. In this study, we show that the mv4 integrase functions in vivo in Escherichia coli and we characterize the bacterial attB site with a site-specific recombination test involving compatible plasmids carrying the recombination sites. The importance of particular nucleotides within the attB sequence was determined by site-directed mutagenesis. The structure of the attB site was found to be simple but rather unusual. A 16-bp DNA fragment was sufficient for function. Unlike most genetic elements that integrate their DNA into tRNA genes, none of the dyad symmetry elements of the tRNA(Ser) gene were present within the minimal attB site. No inverted repeats were detected within this site either, in contrast to the lambda site-specific recombination model.