Translocation specificity of the Tn3 element: characterization of sites of multiple insertions

247 independent events involving insertion of the TN3 transposable element into a 4 kb constructed plasmid (pTU4) of partially known DNA sequence were studied by restriction endonuclease mapping, and 65 of these insertion sites were examined further by DNA sequence analysis. Our results show that the previously proposed regional specificity for Tn3 insertion is associated with a strong preference for AT-rich segments as insertion sites. Moreover, multiple insertions of the Tn3 occurred at certain AT-rich nucleotide positions, and 23 of 26 independent insertion events at a single nucleotide position were found to be in the same orientation. A region of the recipient plasmid showing major homology with the terminal 18 bp of Tn3 was identified in the vicinity of an 11 nucleotide segment that included three insertional hot spots and 36 independent insertions. Our results indicate that the site and orientation of insertion of Tn3 are at least partly determined by the primary nucleotide sequence of the recipient genome, and suggest that insertional hot spots may result from the combined effects of AT richness plus homology of the recipient genome with the terminal sequences of Tn3.     

DNA sequence analysis of Tn10 insertions: origin and role of 9 bp flanking repetitions during Tn10 translocation.

The sequences of insertions of the translocatable tetracycline-resistance element Tn10 into the repressor (cl) gene of bacteriophage lambda have been analyzed. Each insertion contains the same discrete set of Tn10 sequences flanked by a direct repetition of a 9 bp cl-gene sequence. The flanking repititions are generated by duplication of information present only in the target DNA molecule rather than by a Campbell-type recombination event between one 9 bp sequence on the target DNA and a second one provided on the incoming element. The repetitions do not contain genetic or structural information important for translocation. A genetically constructed Tn10 insertion which lacks flanking repetitions is fully functional in translocation to a new position. Tn10 insertions cluster at preferred positions along a target DNA (Kleckner et al., 1979). Sequence analysis shows that four independently isolated cl::Tn10 insertions occur at identical positions in the cl gene. We speculate that homology between Tn10 and its target, at some distance from the site of the actual recombination event, could be relevant to the preference of Tn10 for particular insertion sites.     

Cointegrates carrying two copies of a Tn3 derivative in an inverted orientation

We constructed a mutant of Tn3, Tn3 #2, that contains a 55-bp direct repeat of sequences near the amino-terminal coding region of the transposase, and an 8-bp EcoRI linker. This mutant transposase is functional. The plasmid carrying Tn3 #2, pMB8::Tn3 #2, recombines with the plasmid pHS1 at a frequency of 2.8 X 10(-7) recombinants per division cycle. This is similar to the recombination frequency of pHS1 and pMB8::Tn3+ (wild-type) which is 4.5 X 10(-6) recombinants per division cycle. One-third of the recombinants between pMB8::Tn3 #2 and pHS1 were approx. 22 kb in length. Restriction analysis and nucleotide sequencing showed that these large plasmids were Tn3 #2-mediated cointegrates formed by integration of pMB8::Tn3 #2 into pHS1. However, unlike Tn3 tnpR- -mediated cointegrates that contain direct repeats of the incoming element, Tn3 #2-mediated cointegrates carry two copies of Tn3 #2 in the form of inverted repeats. Like the tnpR- repeats, the Tn3 #2 repeats occur at both junctions between the parental plasmids, and are associated with a 5-bp direct duplication of the pHS1 target site. Furthermore, these recombinants contain a small deletion starting precisely at the end of Tn3 #2 and extending into pMB8 sequences. We propose a model for the generation of Tn3 #2-mediated cointegrates.     

Plasmid R6K DNA replication. II. Direct nucleotide sequence repeats are required for an active gamma-origin

Insertions of the transposable element Tn5 were obtained at a number of sites within the γ origin region of plasmid R6K. A contiguous region of DNA, 240 base-pairs in length, was identified as the functional γ origin of replication on the basis that Tn5 insertions within this region inactivated the origin. This region contains seven, tandemly arranged, 22 base-pair direct repeats. Spontaneous deletion of a Tn5 sequence that is inserted in one of the repeats was accompanied generally by the loss of nucleotide sequences equivalent to one or more of the repeat sequences. Deletion mutants of the γ origin that lack one or two repeats are still functional but a plasmid containing such a mutant origin is not maintained stably. Deletions of nucleotide sequences equivalent to four or more of the direct repeats result in the inactivation of the R6K γ origin.     

Incorporation of the ampicillin resistance transposon into the Escherichia coli K-12 chromosome and into plasmids]

The mutant pEG1 of R-factor RP4 with temperature-sensitive defect in replication, carrying a transposable ampicillin resistance element Tn1 was used to define the frequency of insertion of this element into Escherichia coli K-12 chromosome and some other plasmids. Our results indicate that the frequency of colony forming by bacteria with pEG1-factor on ampicillin medium in non-permissive conditions corresponds to the frequency of Tn1 insertion into bacterial chromosome or some other plasmid (in case when the strains are carrying a second plasmid). The frequency of Tn1 insertion into the chromosome is about 4.10(-4). The defect in recA gene produce no serious change in the frequency of Tn1 insertion into the bacterial chromosome. The translocation of Tn1 element from pEG1-factor to R483, R6 and ColE1 plasmids occurs at 10 to 100-fold-higher frequency than from the plasmid to the chromosome. The insertion of Tn1 into the F'-factor KLF10 and R-factor R64-11 occurs at far lower frequency than that to plasmids R6, R483, or ColE1.     

Hfr formation directed by tn10

The transposable drug-resistance element, Tn10, can serve as a region of homology to direct the insertion of an F'ts114 lac plasmid into the chromosome of Salmonella typhimurium. Derivatives of F'ts114 lac were constructed that carry Tn10 insertions; these plasmids were transferred to strains having a Tn10 insertion in the chromosome. Under these circumstances, Hfr formation requires homologous recombination between plasmid-borne and chromosomal Tn10 elements. The process is dependent on recA function and on the presence of both Tn10 elements. All Hfr's isolated from a given merodiploid show the same direction of transfer. Depending on the orientation of Tn10 in the F' plasmid, Hfr's transferring in either direction can be obtained from any chromosomal Tn10 insertion. Since Tn10 insertions can be generated in any region of the chromosome, this method permits the isolation of Hfr's with either direction of transfer having their origin at almost any predetermined site. The Hfr's constructed by this method are sufficiently stable for standard genetic mapping crosses, and they have also been used to generate new F' plasmids. Implicit in the results above is the possibility of determining the orientation of any chromosomal Tn10 insertion by constructing an Hfr using a standard F' Tn10 plasmid and determining the direction of chromosome transfer. The general approaches described here are applicable to other transposable elements and other bacterial systems.     

Transposon mutagenesis in Proteus mirabilis.

A technique of transposon mutagenesis involving the use of Tn5 on a suicide plasmid was developed for Proteus mirabilis. Analysis of the resulting exconjugants indicated that Tn5 transposed in P. mirabilis at a frequency of ca. 4.5 x 10(-6) per recipient cell. The resulting mutants were stable and retained the transposon-encoded antibiotic resistance when incubated for several generations under nonselective conditions. The frequency of auxotrophic mutants in the population, as well as DNA-DNA hybridizaiton to transposon sequences, confirmed that the insertion of the transposon was random and the Proteus chromosome did not contain significant insertional hot spots of transposition. Approximately 35% of the mutants analyzed possessed plasmid-acquired ampicillin resistance, although no extrachromosomal plasmid DNA was found. In these mutants, insertion of the Tn5 element and a part or all of the plasmid had occurred. Application of this technique to the study of swarmer cell differentiation in P. mirabilis is discussed.     

A pathway for the evolution of the plasmid NTP16 involving the novel kanamycin resistance transposon Tn4352

The kanamycin resistance determinant of the drug resistance plasmid NTP16 has been characterized by DNA sequencing and has been shown to possess all of the structural features of a transposable element. It is made up of a 1040-bp central region encoding a protein identical to the aminoglycoside 3'-phosphotransferase of Tn903, flanked by direct repeats of an element identical to IS26. This novel transposon has been designated Tn4352. Analysis of the host sequences flanking the transposon reveal that they are derived from a Tn3-like element, and contain no 8 base pair target size duplications which are normally created by the insertion of IS26-like elements. Comparison to the Tn3 sequence shows that the flanking sequences are noncontiguous within Tn3, with the clear implication that NTP16 has evolved from a similar plasmid encoding only ampicillin resistance (presumably NTP1) by the insertion of Tn4352 into the Tn3-like element, followed by a substantial deletion. The sequence analysis suggests that the initial insertion was into the tnpR gene of the ampicillin transposon, followed by a deletion extending to a specific site within tnpA.     

The evolution of DNA sequences in Escherichia coli

It is proposed that certain families of transposable elements originally evolved in plasmids and functioned in forming replicon fusions to aid in the horizontal transmission of non-conjugational plasmids. This hypothesis is supported by the finding that the transposable elements Tn3 and gamma delta are found almost exclusively in plasmids, and also by the distribution of the unrelated insertion sequences IS4 and IS5 among a reference collection of 67 natural isolates of Escherichia coli. Each insertion sequence was found to be present in only about one-third of the strains. Among the ten strains found to contain both insertion sequences, the number of copies of the elements was negatively correlated. With respect to IS5, approximately half of the strains containing a chromosomal copy of the insertion element also contained copies within the plasmid complement of the strain.     

Spontaneous transposition in the bacteriophage lambda cro gene residing on a plasmid.

A new mutagenesis assay system based on the phage lambda cro repressor gene residing on a plasmid was developed. The assay detects mutations in cro that decrease the binding of the repressor to the OR operator in an OR PR-lacZ fusion present in a lambda prophage. Mutations arose spontaneously during growth of E. coli cells harboring cro plasmids at a frequency of 3-6 x 10(-6). Analysis of some 200 cro mutants from several 'wild-type' strains revealed a substantial fraction of 25-70% insertion events caused by transposition of IS elements. Most of the insertions were caused by IS1, but IS5 insertions were observed too. In strains harboring Tn10, IS10 was responsible for most insertions. Restriction nuclease digestion analysis revealed a preference for insertion of IS10 into the C-terminal half of cro, despite the absence of sequences which are known hot spots for Tn10 insertions. The frequency of IS1 insertions into cro decreased 25-60-fold and that of IS10 insertions decreased 200-fold in cells carrying the recA56 mutation, suggesting that RecA is involved in transposition of these elements. During the logarithmic phase of growth, the mutation frequency was constant for at least 22 generations; however, upon continuous incubation at the stationary phase, the mutation frequency gradually increased, yielding a 3-fold increase in the frequency of insertion and a 4-5-fold increase in point mutation. Genomic Southern analysis of chromosomal IS elements in cells which underwent a transposition from the chromosome into the cro plasmid revealed that the number and distribution of IS1 and IS5 were usually unaltered compared to cells which did not undergo a transposition event. In contrast, essentially each IS10 transposition was accompanied by multiple events which led to changes in the number and distribution of chromosomal IS10 elements.     

pλCM System: Observations on the Roles of Transposable Elements in Formation and Breakdown of Plasmids Derived from Bacteriophage Lambda Replicons

Transduction with phage derived from a 2-year-old lysate of lambda cam105 (lambda::Tn9) gave rise to chloramphenicol-resistant (Cm(r)) transductants harboring a plasmid (plambdaCM1) formed from lambda cam105 by a Tn9-mediated adjacent deletion to position 36.07 kilobases in the N cistron of lambda. The plambdaCM element can replicate as a plasmid, insert into the bacterial genome, or reproduce lytically as a phage on cells that provide N function. The feasibility of obtaining high titers in encapsidated form and the ease of synchronous introduction into and recovery from bacterial populations make plambdaCM very suitable for quantitative studies of recombination involving transposable elements. Replicon fusions between plambdaCM1 and RSF1596 (pMB8::Tn3Delta596) occur by duplication of either IS1 (at low rate in the absence of TnpA activity) or Tn3Delta596 (in the presence of TnpA activity). At 24 or 32 degrees C, the rate of increase of TnpA-mediated fusions per plambdaCM is about 2% per cell doubling. RSF103 contains the deleted Tn1DeltaAp (which lacks intact beta-lactamase and TnpR resolvase coding sequences) adjacent to a streptomycin resistance (Sm(r)) determinant. We observed that Tn1DeltaAp mediates insertions of external RSF103 sequences into the R388 plasmid. R388::Tn1DeltaAp plasmids show transposition immunity in cells lacking TnpR activity. Using the plambdaCM system, we isolated adjacent transpositions of the RSF103 Sm(r) determinant. The resulting plambdaCM-Sm cosmids contain Sm(r) genetic material flanked by direct repeats of Tn1DeltaAp, and all are deleted for some RSF103 or plambdaCM sequences. The plambdaCM-Sm constructs will fuse into R388 by duplication of a single Tn1DeltaAp element. In the presence of tnpR(+) (but not tnpR) Tn1 or Tn3 elements, all Tn1DeltaAp-mediated complex replicons break down completely and rapidly to simple Tn1DeltaAp inserts. The equilibrium for resolution is at least 10(5):1, and resolution is more than 90% complete after 40 min of exposure to a tnpR(+) cytoplasm. In the absence of TnpR, Rec, and Red activities, Tn1DeltaAp-mediated complex replicons yield simple Tn1DeltaAp inserts at a lower rate. The presence of intact RSF103 replication determinants between direct Tn1DeltaAp repeats appears to accelerate this precise TnpR- and Rec-independent breakdown.     

Physical and genetic organization of the plasmid R15

The conjugative IncN plasmid R15 (SmrSurHgr, 62.3 kb) is cleaved by the hexanucleotide-specific endonucleases BglII, HindIII, EcoRI, BamHI, SmaI, SalI, PstI and XhoI into 9, 9, 6, 5, 4, 4, 4 and 2 fragments, respectively. The restriction sites were located on the physical map of the R15 genome. Distribution of the cleavage sites is strongly asymmetric. 28 of 32 sites for BamHI, EcoRI, HindIII, SalI, SmaI and PstI were located close to or within the sequences of transposable elements Tn2353 and Tn2354. According to the results of analysis of R15::Tn1756 deletion derivatives and recombinant plasmids harboring fragments of R15, the genetic determinants for resistance to Sm, Su and Hg were mapped, as well as the regions necessary for EcoRII restriction--modification and for plasmid replication and conjugation. The features of physical and genetic structures of R15 and other IncN plasmids are discussed.     

A derivative of Tn5 with direct terminal repeats can transpose

The 5.7 kb⁴ transposable kanamycin resistance determinant Tn5 contains 1.5 kb terminal inverted repeats which we here call arms. Tn5's arms contain the genes and sites necessary for Tn5 transposition, and are not homologous to previously described transposable elements. To determine whether one or both arms is a transposable (IS) element, we transposed Tn5 to pBR322 and used restriction endonuclease digestion and ligation in vitro to generate plasmid derivatives designated pTn5-DR1 and pTn5-DR2 in which Tn5's arms were present in direct rather than in inverted orientation. Analysis of transposition products from dimeric forms of the pTn5-DR1 plasmid to phage λ showed that the outside and inside termini of right and of left arms could function in transposition. We conclude that both of Tn5's arms are transposable elements and name them IS50L (left) and IS50R (right). IS50R, which encodes transposase, was used several-fold more frequently than IS50L, which contain an ochre mutant allele of transposase: this implies that Tn5's transposase acts preferentially on the DNA segment which encodes it. Analysis of transpositions of the amp^rkan^r element Tn5-DR2 to the lac operon showed that Tn5-DR2, like Tn5 wild-type, exhibits regional preference without strict site specificity in the choice of insertion sites.     

Identification and characterization of transposable elements of Paracoccus pantotrophus

We studied diversity and distribution of transposable elements residing in different strains (DSM 11072, DSM 11073, DSM 65, and LMD 82.5) of a soil bacterium Paracoccus pantotrophus (alpha-Proteobacteria). With application of a shuttle entrapment vector pMEC1, several novel insertion sequences (ISs) and transposons (Tns) have been identified. They were sequenced and subjected to detailed comparative analysis, which allowed their characterization (i.e., identification of transposase genes, terminal inverted repeats, as well as target sequences) and classification into the appropriate IS or Tn families. The frequency of transposition of these elements varied and ranged from 10(-6) to 10(-3) depending on the strain. The copy number, localization (plasmid or chromosome), and distribution of these elements in the Paracoccus species P. pantotrophus, P. denitrificans, P. methylutens, P. solventivorans, and P. versutus were analyzed. This allowed us to distinguish elements that are common in paracocci (ISPpa2, ISPpa3--both of the IS5 family--and ISPpa5 of IS66 family) as well as strain-specific ones (ISPpa1 of the IS256 family, ISPpa4 of the IS5 family, and Tn3434 and Tn5393 of the Tn3 family), acquired by lateral transfer events. These elements will be of a great value in the design of new genetic tools for paracocci, since only one element (IS1248 of P. denitrificans) has been described so far in this genus.     

Induction of gamma delta transposition in response to elevated glucose-6-phosphate levels.

The nonenzymatic glycosylation of nucleic acids in vitro by the reducing sugars, glucose or glucose-6-phosphate, alters both physical and biological properties. Recent investigations have demonstrated that elevated intracellular levels of glucose-6-phosphate in glycolytic mutants of E. coli resulted in a concentration-associated increase in mutations of a target plasmid. The majority of the plasmid mutations were due to large (greater than 1 kb) insertions or deletions. We describe here the further analysis of mutant plasmids isolated from bacteria grown under conditions which were conducive to the intracellular accumulation of glucose-6-phosphate. We have found that a number of the insertional plasmid mutations were the result of the movement of the transposable element gamma delta from the host genome into the plasmid. The frequency of gamma delta transposition was also associated with the amount of glucose-6-phosphate accumulated in the bacterial cells. Furthermore, the presence of another transposable element, either Tn 5 or Tn 10 in the host genome increased the rate of gamma delta transposition without affecting its own movement. The observed increase in gamma delta transposition suggests a novel mechanism of induction by reducing sugars which may be the result of DNA modifications by reducing sugars.     

Miniature transposable sequences are frequently mobilized in the bacterial plant pathogen Pseudomonas syringae pv. phaseolicola

Mobile genetic elements are widespread in Pseudomonas syringae, and often associate with virulence genes. Genome reannotation of the model bean pathogen P. syringae pv. phaseolicola 1448A identified seventeen types of insertion sequences and two miniature inverted-repeat transposable elements (MITEs) with a biased distribution, representing 2.8% of the chromosome, 25.8% of the 132-kb virulence plasmid and 2.7% of the 52-kb plasmid. Employing an entrapment vector containing sacB, we estimated that transposition frequency oscillated between 2.6×10(-5) and 1.1×10(-6), depending on the clone, although it was stable for each clone after consecutive transfers in culture media. Transposition frequency was similar for bacteria grown in rich or minimal media, and from cells recovered from compatible and incompatible plant hosts, indicating that growth conditions do not influence transposition in strain 1448A. Most of the entrapped insertions contained a full-length IS801 element, with the remaining insertions corresponding to sequences smaller than any transposable element identified in strain 1448A, and collectively identified as miniature sequences. From these, fragments of 229, 360 and 679-nt of the right end of IS801 ended in a consensus tetranucleotide and likely resulted from one-ended transposition of IS801. An average 0.7% of the insertions analyzed consisted of IS801 carrying a fragment of variable size from gene PSPPH_0008/PSPPH_0017, showing that IS801 can mobilize DNA in vivo. Retrospective analysis of complete plasmids and genomes of P. syringae suggests, however, that most fragments of IS801 are likely the result of reorganizations rather than one-ended transpositions, and that this element might preferentially contribute to genome flexibility by generating homologous regions of recombination. A further miniature sequence previously found to affect host range specificity and virulence, designated MITEPsy1 (100-nt), represented an average 2.4% of the total number of insertions entrapped in sacB, demonstrating for the first time the mobilization of a MITE in bacteria.     

Characterization of a translocation unit encoding resistance to mercuric ions that occurs on a nonconjugative plasmid in Pseudomonas aeruginosa.

The nonconjugative plasmid, pVS1, has a molecular weight of 18.5 X 10(6) and confers resistance to sulfonamides and to mercuric ions. In Pseudomonas aeruginosa PAO, the transfer can be mobilized by a variety of conjugative plasmids, and the process does not require a functional recombination system in the donor. Hybrid plasmids that arise by the relocation of the mer gene onto the mobilizing plasmid can be isolated readily, and, as far as can be determined, these hybrids retain the genome of the conjugative plasmid in toto. The relocation of mer occurs by a Rec-independent process and leads to a constant increase (about 6 X 10(6) daltons) in the size of the recipient plasmid. This suggests that the mer gene in pVS1 is located on a translocation unit, designated Tn501, of a molecular weight of about 6 X 10(6). The translocation of Tn501 into RP1 is not usually associated with the loss of any known plasmid-mediated function, but transfer-defective or tetracycline-sensitive derivatives do occur at frequencies of about 4%, whereas carbenicillin-sensitive or kanamycin-sensitive variants arise with a frequency of about 0.2% each. It seems therefore that the integration of Tn501 can occur at any one of a minimum of five sites in RP1.     

Broad-host-range IncP-4 plasmid R1162: effects of deletions and insertions on plasmid maintenance and host range

R1162 is an 8.7-kilobase (kb) broad-host-range replicon encoding resistance to streptomycin and sulfa drugs. In vitro deletion of 1.8-kb DNA between coordinates 3.0 and 5.3 kb did not affect plasmid maintenance, but a Tn1 insertion at coordinate 6.3 kb led to a recessive defect in plasmid maintenance. The only cis-acting region necessary for plasmid replication appears to lie between the Tn1 insertion at coordinate 6.3 kb and a second Tn1 insertion at coordinate 6.5 kb. All R1162 sequences between position 6.5 kb and the EcoRI site at coordinate 8.7/0 kb were dispensible for replication in Escherichia coli and Pseudomonas putida. Plasmids carrying insertions in a variety of restriction sites in an R1162::Tn1 derivative were unstable in P. putida but stable in E. coli. Tn5 insertions in R1162 showed a hot spot at coordinate 7.5 kb. A Tn5 insertion at coordinate 8.2 kb appeared to mark the 3' end of the streptomycin phosphotransferase coding sequence. All R1162::Tn5 derivatives showed specific instability in Pseudomonas strains but not in E. coli. The instability could be relieved by internal deletions of Tn5 sequences. In the haloaromatic-degrading Pseudomonas sp. strain B13, introduction of an unstable R1162::Tn5 plasmid led to loss of ability to utilize m-chlorobenzoate as a growth substrate. Our results showed that alteration of plasmid sequence organization in nonessential regions can result in restriction of plasmid host range.     

Mutational analysis of att554, the target of the site-specific transposon Tn554.

Tn554 is a high-frequency, site-specific transposable element of Staphylococcus aureus which has integrative properties resembling those of temperate bacteriophages. Tn554 inserts at a unique chromosomal location, designated att554. att554 contains a core hexanucleotide sequence, 5'-GATGTA-3' (nucleotides numbered -3 to +3). Most of the time (greater than 99%) insertion occurs immediately 3' to this sequence; the resulting orientation of Tn554 to att554 is designated as the (+) orientation. Infrequent insertions immediately 5' to the core sequence result in the opposite, or (-) orientation. Mutational analysis of a cloned att554 site indicates that deletions extending from the left and ending at -15 or from the right ending between +8 and +12 reduced attachment site efficiency. Plasmids with deletions extending closer to the insertion site, although still retaining the core sequence from -3 to +3, were totally inactive. Tn554 insertions into partially active att554 sites retained normal site- and orientation-specificity with respect to att554, but they frequently contained abnormal sequences at the junction of att554 and the 3' end of Tn554. These data indicate that att554 contains a short nucleotide sequence essential for transposition and flanking sequences that greatly increase the frequency of recombination.