Mechanisms of heat-induced antigen retrieval: does pH or ionic strength of the solution play a role for refolding antigens?

We investigated the effects of pH and ionic strength of solutions used for antigen retrieval to elucidate the mechanism of heat-induced antigen retrieval (HIAR) in immunohistochemistry. The immunostaining intensity of nuclear, cytoplasmic, cell membrane, and extracellular matrix antigens with 17 different antibodies was evaluated in formaldehyde-fixed and paraffin-embedded mouse and human tissues. Deparaffinized sections were autoclaved for 10 min in buffers with different pH values ranging from 3.0 to 10.5. To test the influence of ionic strength on immunoreactions, the sections were autoclaved for 10 min in 20 mM Tris-HCl buffers (TB) at pH 9.0 and 10.5 with or without 25, 50, and 100 mM NaCl. There were two immunostaining patterns for pH dependency of HIAR. First, the majority of antibodies recovered their antigenicity when heated in the buffers with both acidic pH (pH 3.0) and basic pH (pH 9.0 and 10.5). Second, some antibodies showed strong immunostaining only at basic pH values (pH 9.0 and 10.5). When the sections were autoclaved in TB at pH 9.0, immunostaining of all eight antibodies examined decreased as the NaCl concentration increased. On the other hand, when the sections were treated with TB at pH 10.5, all antibodies yielded stronger reactions in the buffer containing NaCl than in the buffer without NaCl; five antibodies exhibited the strongest immunoreaction at concentrations from 25 to 50 mM. These results suggest that the extended polypeptides by heating are charged negatively or positively at basic or acidic pH, and that an electrostatic repulsion force acts to prevent random entangling of polypeptides caused by hydrophobic attractive force and to expose antigenic determinants, during cooling process of HIAR solution.     

Use of pH 9.5 Tris-HCI Buffer Containing 5% Urea for Antigen Retrieval Immunohistochemistry

Successful antigen retrieval (AR) immunohistochemistry is dependent on the temperature, heating time, and pH value of the AR solutions. There is no single standardized AR solution, however, that is suitable for all antibodies “routinely” used in surgical pathology for immunostaining archival tissue sections. We tested a variety of AR solutions varying in pH value, chemical composition, and molarity. Based upon preliminary results, we compared three AR solutions: 0.1 M Tris-HCI buffer, pH 9.5, containing 5% urea, 0.1 M Tris-HCI buffer pH 9.5 without urea, and citrate buffer, pH 6.0. Each AR solution was tested with a panel of 34 antibodies using microwave heating for antigen retrieval. The heating conditions were standardized at 10 min and an automated stainer was used to standardize the immunostaining method. The Tris-HC1 containing urea was superior to pH 6.0 citrate buffer for 22 antibodies. In 12 cases, Tris-HC1 with urea was also superior to Tris-HC1 alone. In 12 cases, the intensity was similar for all three retrieval solutions. The staining obtained with Tris-HC1 with urea was equal to or better than with pH 6.0 citrate buffer in all cases. The Tris-HC1 with urea solution is satisfactory for AR of most antibodies employed in routine surgical pathology.     

Use of pH 9.5 Tris-HCI Buffer Containing 5% Urea for Antigen Retrieval Immunohistochemistry

Successful antigen retrieval (AR) immunohistochemistry is dependent on the temperature, heating time, and pH value of the AR solutions. There is no single standardized AR solution, however, that is suitable for all antibodies “routinely” used in surgical pathology for immunostaining archival tissue sections. We tested a variety of AR solutions varying in pH value, chemical composition, and molarity. Based upon preliminary results, we compared three AR solutions: 0.1 M Tris-HCI buffer, pH 9.5, containing 5% urea, 0.1 M Tris-HCI buffer pH 9.5 without urea, and citrate buffer, pH 6.0. Each AR solution was tested with a panel of 34 antibodies using microwave heating for antigen retrieval. The heating conditions were standardized at 10 min and an automated stainer was used to standardize the immunostaining method. The Tris-HC1 containing urea was superior to pH 6.0 citrate buffer for 22 antibodies. In 12 cases, Tris-HC1 with urea was also superior to Tris-HC1 alone. In 12 cases, the intensity was similar for all three retrieval solutions. The staining obtained with Tris-HC1 with urea was equal to or better than with pH 6.0 citrate buffer in all cases. The Tris-HC1 with urea solution is satisfactory for AR of most antibodies employed in routine surgical pathology.     

The Determination of Apparent Isoelectric Points of Cell Structures by Staining at Controlled Reactions

The staining reactions at controlled pH-values of various dyes with the nucleus and cytoplasm of Trichonympha collaris under different conditions were investigated. When staining intensity was plotted against pH, it was found that with each dye a different curve was obtained. “Isoelectric points” obtained by superposition of acid and basic dye curves varied for the same material with the dyes employed. It was found that, with the same dye, the curves of staining intensity plotted against pH varied with the buffer system utilized. Moreover, the intensity of staining at any pH was found to vary directly with the concentration of dye and inversely with the concentration of buffer. Various factors modifying staining intensity were studied. In the staining of a protein in buffered solution, it was shown that staining intensity (the index of the concentration of the dye-protein compound) at a given pH-value is dependent upon the interaction of the dye-protein, buffer-protein and dye-buffer systems, and that as the dye or buffer or their concentrations were varied, the resultant “isoelectric points” which were obtained also varied. In view of these facts and of the present lack of knowledge of dyes and dye-protein combinations it would be impossible to determine a true isoelectric point by staining at controlled pH-values without further extensive work on the subject. It follows that no true isoelectric points have hitherto been obtained for nucleus, cytoplasm or other tissue elements by staining at controlled pH.     

Inhibition Reactivation Myofibrillar ATPase Technique for Demonstration of Three Fiber Types in a Single Cryostat Muscle Section

An inhibition reactivation technique was used for histochemical staining of human skeletal muscle sections. Myofibrillar ATPase activity was inhibited by sodium hydroxymercuribenzoate (2.5 mM in 0.1 M Tris-HCl buffer, pH 7.2-7.5, 30 min) and successively reactivated by cysteine which was added to incubation solution (10 mM cysteine-HCl, 2.5 mM ATP-disodium salt, 50 mM potassium chloride and 27 mM calcium chloride in barbital buffer, pH 9.4, 35 min at 37 C). This technique allows the distinction of three fiber categories with different staining intensities in single cross-section. Dark, intermediate and light fibers correspond to IIB, I, and IIA types, respectively. Storage of air dried sections in the freezer at -20 C for one month had no influence on staining characteristics.     

Inhibition reactivation myofibrillar ATPase technique for demonstration of three fiber types in a single cryostat muscle section

An inhibition reactivation technique was used for histochemical staining of human skeletal muscle sections. Myofibrillar ATPase activity was inhibited by sodium hydroxymercuribenzoate (2.5 mM in 0.1 M Tris-HCl buffer, pH 7.2-7.5, 30 min) and successively reactivated by cysteine which was added to incubation solution (10 mM cysteine-HCl, 2.5 mM ATP-disodium salt, 50 mM potassium chloride and 27 mM calcium chloride in barbital buffer, pH 9.4, 35 min at 37 C). This technique allows the distinction of three fiber categories with different staining intensities in single cross-section. Dark, intermediate and light fibers correspond to IIB, I, and IIA types, respectively. Storage of air dried sections in the freezer at -20 C for one month had no influence on staining characteristics.     

An antigen retrieval method using an alkaline solution allows immunoelectron microscopic identification of secretory granules in conventional epoxy-embedded tissue sections.

Immunoelectron microscopy using chromogranin A-specific antibodies has been proposed as an efficient technique for identification of secretory granules (SGs) in tumor cells with evidence of apparent neuroendocrine differentiation. Using an antigen retrieval (AR) method, we succeeded in immunolabeling SGs with antibodies in ultrathin sections of routinely processed epoxy-embedded blocks of tissue. Samples of an insulinoma were fixed in 2% glutaraldehyde, postfixed in 1% OsO(4), and embedded in epoxy resin. Ultrathin sections were immunostained with chromogranin A-specific antibodies and gold-conjugated second antibodies. There was no significant labeling in the absence of AR. Neither etching with sodium metaperiodate nor microwave irradiation of ultrathin sections in citrate buffer (pH 6.0) or in EDTA buffer (pH 8.0) was effective in improving the efficiency of immunolabeling. However, ultrathin epoxy-embedded sections that were microwaved in alkaline solution (pH 10) were adequately labeled (5.2 +/- 0.34 particles per SG). Moreover, considerably improved efficiency of immunostaining was achieved by microwaving sections in alkaline solution (pH 10) with subsequent immunostaining at 60C (12.2 +/- 0.51 particles per SG). This method can also be applied to epoxy-embedded sections obtained from formalin-fixed, paraffin-embedded blocks of tissue and was even valid for an old epoxy-embedded block of tissue prepared 15 years previously.     

Further characterization of the anti-encephalitogenic protein (SCP): isolation from bovine spinal cord and spinal roots.

The three molecular forms of the anti-encephalitogenic protein, beta-SCP, gamma-SCP, and SCP-peptide were isolated in higher yield by a shortened procedure, which involved 1) extraction of bovine spinal cord (BSC) or bovine spinal roots (BSR) with 0.05 M sodium acetate buffer, pH 4.5, 2) batch absorption on CM-52 cellulose, 3) stepwise elution with sodium acetate buffers, pH 5.8, containing increasing concentrations of sodium chloride and finally, 4) removal of trace contaminants by gel-exclusion chromatography on Sephadex G-50 superfine. The m.w. of the purified proteins determined by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis was 13,200 daltons. The same value for the molecular sizes was obtained by gel-exclusion chromatography by using 0.1% SDS in 0.05M sodium chloride as eluant. In the absence of SDS the molecular sizes estimated by gel exclusion chromatography ranged from 14,000 to 18,500. The amino acid compositions of the beta-SCP and gamma-SCP from BSC and BSR were similar except that beta-SCP from BSR lacked half-cystine whereas gamma-SCP from BSR contained three times as much half-cystine as the SCP forms prepared from BSC. All forms of SCP showed reactions of identity when compared by immunodiffusion analyses with a rabbit anti-bovine SCP serum; none formed precipitin lines with a rabbit anti-bovine myelin basic protein (MyBP) serum.     

Comparative Study of Antigen Retrieval Heating Methods: Microwave, Microwave and Pressure Cooker, Autoclave, and Steamer

We present a study comparing the most popular beating methods currently used for antigen retrieval (AR) immunostaining: the microwave oven, microwave with pressure cooker, autoclave, and steamer heating. A panel of 21 antibodies was tested on formalin fixed, paraffin embedded sections using these heating methods and Tris-HC1 buffer, pH 9.5, plus 5% urea as the AR solution. Three observers independently evaluated the intensity of AR immunostaining. All heating methods yielded good results for AR immunostaining. There were only minor differences among the heating methods for AR when the optimal concentration of primary antibody for normal immunostaining was used; however, background staining may occasionally be troublesome if antibodies are not retitrated and diluted further for use on tissues after AR. Significant differences were observed only after further dilution of the primary antibodies; the microwave pressure cooker, extended microwave heating (5 min × 4) and autoclave heating then showed a similar intensity of staining that was stronger than results obtained with the steamer (20 min) or regular microwave heating (5 min × 2 J. Extension of the steamer heating time, however, yielded equivalent results. This study indicates that different heating methods can yield similar intensities of AR immunostaining if the heating times are adjusted appropriately. It is noteworthy that, in general, the adjusted conditions for maximal retrieval differ from those most widely cited in the literature, or recommended by manufacturers. That several heating devices may provide similar results permits the use of different AR heating methods according to the equipment available. This study also is an early step in standardizing the AR immunostaining protocol by providing uniform conditions for “maximal retrieval” as a common end point for all laboratories.     

Specificity of the localization of transforming growth factor-alpha immunoreactivity in colon mucosa.

Transforming growth factor-alpha (TGF-alpha) plays an important role in gastrointestinal pathophysiology. However, the exact location of its expression in the intestine is still controversial. This study systematically compared the localization of TGF-alpha immunoreactivity in frozen or fixed human colon using three different antibodies and examined specificity of antibodies by using tissues from TGF-alpha knockout mice and by Western blotting. Consistent with the mRNA distribution revealed by in situ hybridization, a similar staining pattern was obtained in frozen sections by all three antibodies, localizing on the surface and along the crypt epithelium. In paraffin sections, although the polyclonal antibodies (raised against recombinant human or rat TGF-alpha) gave minimal staining, the monoclonal antibody (against C-terminal peptide of human TGF-alpha) still gave intense staining on the surface and upper crypt epithelium. By using specimens from TGF-alpha knockout mice in immunostaining and Western blotting, the polyclonal antibodies were shown to be specific. In contrast, specificity of the monoclonal antibody was in doubt in rodent tissues because it gave similar detection between wild-type and knockout mice in both analyses, indicating its crossreaction to non-TGF-alpha molecules. In conclusion, frozen sections and antibodies raised from recombinant TGF-alpha should be used for TGF-alpha immunohistochemistry in the colon.     

Ultrastructural cytochemical localization of uricase in peroxisomes of rat liver

Ultrastructural localization of uricase (urate: oxygen oxidoreductase, E.C.1.7.3.3.) in rat liver parenchymal cells has been studied with the cerium technique. The cerous ions react with H2O2 generated by the activity of the enzyme in the presence of urate, forming the electron-dense reaction product of cerous perhydroxide. Tissue fixation is carried out by perfusion for 5 min with a low concentration (0.25%) of glutaraldehyde. Since in a biochemical assay it was found that the activity of uricase determined in Trismaleate buffer is substantially weaker than in the Pipes buffer, the classical medium of Briggs et al. (6) was modified, and the latter buffer was substituted for the Trismaleate. Vibratome sectons are incubated at 37 degrees C for 60 min in 0.1 M Pipes buffer, pH 7.8, containing 3 mM cerium chloride and 0.1 mM sodium urate. Under these conditions, the reaction product is localized in the crystalline cores of hepatic peroxisomes. The intensity of the staining is dependent on the concentration of the substrate and the incubation time. In control preparations incubated without urate or with 2,6,8-trichloropurine, a specific inhibitor of uricase, staining is almost completely abolished. In sections incubated with 5 mM cerium and 0.1 mM sodium urate, fine granules with a distribution corresponding to peroxisomes are also visible at the light microscopic level. This latter observation is invaluable for correlative light and electron microscopic studies.     

Comparison of different double immunostaining protocols for paraffin embedded liver tissue.

Most of the double immunostaining protocols that have been introduced so far have been developed for application on fresh frozen material or based on different species antibodies. In liver tissue, general problems of double immunostaining techniques are further complicated by tissue-specific difficulties, such as necrosis or high intracellular protein content. To assess a reliable double immunostaining protocol for archived, paraffin embedded liver tissue, different protocols based on the use of same species primary antibodies were evaluated in terms of sensitivity, specificity and non-specific background staining in pathological liver specimens. We compared peroxidase-anti-peroxidase, alkaline phosphatase-anti-alkaline phosphatase (PAP/APAP), labelled-avidin-biotin (LAB/LAB) and digoxigenin-anti-digoxigenin (dig-a-dig/PAP) techniques using different cytokeratin antibodies and an antibody against PCNA. Comparison of the double immunostaining techniques revealed a high sensitivity and specificity in all procedures. Sections, which were stained employing PAP/APAP-technique, displayed a higher background staining compared to sections which were treated with the LAB/LAB or dig-a-dig/PAP protocol. In contrast to the dig-a-dig/PAP protocol, the LAB/LAB technique provides a better time/cost relationship. Therefore, we would like to recommend a modified LAB/LAB protocol for simultaneous detection of different antigens in archived liver tissue.     

Uptake of U-14C-glucose by Streptococcus mutans in the presence of saccharin

The uptake of U-14C-glucose by resting cells of Streptococcus mutans OMZ-176 was studied in the presence of the artificial sweetener saccharin as well as sodium chloride. Glucose grown cells were resuspended in phosphate buffer (0.05 M, pH 7.8), and the uptake of U-14C-glucose was observed for 150 min in time intervals of 30 min, in the presence of 0.02 and 2.00 mg/ml of sodium saccharin as well as sodium chloride. As compared to the control and the sodium chloride treatments, sodium saccharin at the highest concentration range more than doubled the accumulation of radioactive labelled carbon within the cells.     

金属螯合亲和层析法纯化抗乙肝核心抗原单克隆抗体

采用金属螯合亲和层析法,纯化了小鼠腹水来源的抗乙肝核心抗原单克隆抗体,对上样缓冲液的pH和离子强度、洗脱液种类和洗脱方式进行优化。结果表明,采用降低pH分步洗脱时,最佳上样缓冲液为pH8.0,20mmol/LPB+0.5mol/LNaCl,抗体在pH5.0被洗脱下来,抗体回收率80%,纯度85%。采用咪唑浓度梯度洗脱时,最佳的上样缓冲液为pH8.0,20mmol/LPB+5mmol/L咪唑,抗体纯度大于95%,回收率65%;在上样缓冲液中不添加NaCl而添加少量的咪唑,更有利于抗体分离。以上洗脱方式都能较好地保持mAb的生物学活性,为该抗体的应用提供了必要的实验基础。     

Preparation and properties of monoclonal antibodies against Mycobacterium tuberculosis

The above mentioned monoclonal antibodies of idiotype IgG 3/Kappa against TMC 120 and TMC 107 strains of M. tuberculosis were prepared by fusion of mouse myeloma line FO cells with splenocytes BALB/c of mice immunized with complex antigens. These were prepared from the bacterial mass previously inactivated with gamma-rays radiation, and applied without mycobacterial adjuvant agent. Species specificity of both monoclonal antibodies was determined by ELISA testing and dot blot test. The potential use of the mentioned preparations consists in species identifying and taxonomy of mycobacteria, mycobacterial antigen purification and prompt TBC diagnosis (serodiagnosis, identifying of specific antigens in pathological materials.     

白桦茸凝集素提取工艺的优化

对白桦茸凝集素最佳提取工艺进行了研究.以2%兔血细胞凝血效价为指标,确定了最佳提取缓冲液.通过正交试验对料液比、提取时间、提取液pH值、NaCl浓度等因素进行了优化分析并确定了提取工艺的最佳参数组合.结果表明,以TBS和PBS为提取缓冲液所得的白桦茸凝集素凝集效价分别为64、16;最佳提取工艺:液料比为50:1,提取时间为20h,NaCl浓度为0mol/L,缓冲液pH值为8.0,按该最佳工艺提取白桦茸凝集素凝血效价为256.所优化的提取工艺稳定、可行,为该凝集素进一步在免疫调节方面的开发应用提供一定基础.     

Immunological Response of the Rabbit to Vi Antigen

Vi antibody response of rabbits varied depending on whether Vi antigen was administered in particulate or soluble state. Vi antigen in particulate form induced hemagglutinins, bacterial agglutinins, and passive cutaneous anaphylaxis (PCA) antibodies, whereas soluble Vi antigen induced only hemagglutinins. Guinea pigs passively sensitized with antisera against particulate Vi antigen gave PCA reactions when challenged with either soluble or cellular Vi antigen; antisera against soluble Vi antigen were negative for PCA. The specificity of PCA was demonstrated by its dependence on the Vi concentration and by absorption of PCA activity from antisera with V-form cells of Salmonella typhosa.     

pH-dependent electrical properties and buffer permeability of the Necturus renal proximal tubule cell

Necturus kidneys were perfused with Tris-buffered solutions at three different pH values, i.e. 7.5, 6.0 and 9.0. A significant drop in fluid absorption occurred at pH 6.0, whereas pH 9.0 did not increase volume flow significantly. When acute unilateral, i.e. either in the lumen or the peritubular capillaries, and bilateral pH changes were elicited in both directions from 7.5 to 9.0 at a constant Tris-butyrate buffer concentration, both peritubular membrane potential difference V1 and transepithelial potential difference V3 hyperpolarized, independently of the side where the change in pH was brought about. Acid perfusions at pH 6.0 caused a similar response but of opposite sign. Analysis of the potential changes shows that pH influences not only the electromotive force and resistance of the homolateral membrane, but also the electrical properties of the paracellular path. Interference of pH with Na, Cl or K conductance was assessed. Any appreciable role for sodium or chloride was excluded, whereas the potassium transference number (tK) of the peritubular membrane increased 16% in alkaline pH. However, this increase accounts only for 19 to 36% of the observed hyperpolarization. Since changes in Tris-butyrate buffer concentration at constant pH do not affect V1 or V3 considerably, the hyperpolarization in pH 9 cannot be explained by an elevation in internal pH only, or by a Tris-H+ ion diffusion potential only. The role of the permeability of the buffers: bicarbonate, butyrate and phosphate, in determining electrical membrane parameters was evaluated. Transport numbers of the buffer anions ranked as follows: tHCO3 greater than tbutyrate greater than tphosphate. It is concluded that modulation of membrane potential by extracellular pH is mediated primarily by a change in peritubular cell membrane tK and additionally by membrane currents carried by buffer anions.     

Production and Characterization of Monoclonal Antibodies Against Myelin-Associated Glycoprotein

Monoclonal antibodies against myelin-associated glycoprotein were generated by fusing mouse myeloma cells with spleen lymphocytes from BALB/c mice immunized with human myelin-associated glycoprotein purified from CNS myelin. Three groups of antibodies were identified: IgG antibodies recognizing the polypeptide moiety and IgG and IgM antibodies recognizing the carbohydrate moiety of the intact molecule. Properties of these antibodies were examined with sodium dodecyl sulfate-polyacrylamide gel electrophoresis and the immunostaining technique using human CNS and peripheral nerve myelin, and ganglioside fractions isolated from human brain and peripheral nerve, and with immunohistochemical staining of human peripheral nerves. Part of human peripheral blood mononuclear cells was stained with the antibodies against the carbohydrate moiety, but not with IgG antibodies recognizing the polypeptide moiety. Natural killer activity was partially reduced after treatment of human peripheral blood lymphocytes with an IgM antibody and complement in vitro. The possibility that anti-myelin-associated glycoprotein antibodies might play a role in the pathogenesis of demyelinating diseases through modification of natural killer activity is discussed.     

Mechanistic studies on carboxypeptidase A from goat pancreas: role of arginine residue at the active site

Chemical modification of carboxypeptidase Ag1 from goat pancreas with phenylglyoxal or ninhydrin led to a loss of enzymatic activity. The inactivation by phenylglyoxal in 200 mM N-ethylmorpholine, 200 mM sodium chloride buffer, pH 8.0, or in 300 mM borate buffer, pH 8.0, followed pseudo-first-order kinetics at all concentrations of the modifier. The reaction order with respect to phenylglyoxal was 1.68 and 0.81 in 200 mM N-ethylmorpholine, 200 mM NaCl buffer and 300 mM borate buffer, pH 8.0, respectively, indicating modification of single arginine residue per mole of enzyme. The kinetic data were supported by amino acid analysis of modified enzyme, which also showed the modification of single arginine residue per mole of the enzyme. The modified enzyme had an absorption maximum at 250 nm, and quantification of the increase in absorbance showed modification of single arginine residue. Modification of arginine residue was protected by beta-phenylpropionic acid, thus suggesting involvement of an arginine residue at or near the active site of the enzyme.