A sensitive nonisotopic hybridization assay for HIV-1 DNA

We have developed a microtiter-based sandwich hybridization assay for the detection of low copy number HIV-1 sequences. The assay employs a capture DNA sequence covalently coupled to microtiter wells through linker arms. The detection probe is a biotin-labeled DNA fragment derived from sequences adjacent to the capture sequence. After hybridization in the presence of sample nucleic acid, the detection probe remains bound only if the sample contained complementary sequences spanning the junction between capture and detection probes. The amount of detection probe bound is quantified by incubation with a peroxidase-streptavidin conjugate and a colorimetric peroxidase substrate. This assay has been combined with enzymatic target amplification to achieve sensitive detection of HIV-1 in patient samples. Following amplification of HIV-1 DNA using the polymerase chain reaction technique, a 190-bp product is produced. This product is easily and specifically quantified using the sandwich hybridization assay. The resulting test can detect one HIV-1-infected cell in 10(5) cells or about 30 molecules of HIV-1 DNA.     

Quantitation of non-amplified genomic DNA by bead-based hybridization and template mediated extension coupled to alkaline phosphatase signal amplification

Klenow I polymerase activity was combined with solid phase DNA hybridization to detect non-amplified genomic DNA (gDNA) sequences from Escherichia coli. Aminopropyl-controlled pore glass surface-bound oligonucleotides were hybridized to fragmented gDNA. The template-mediated extension at the 3′-terminus of the immobilized probe was then promoted in the presence of Klenow I polymerase and digoxigenin-labeled nucleotides. Detection of the extended probes was accomplished with an anti-digoxigenin alkaline phosphatase conjugate protocol coupled to colorimetric or fluorescent detection. Using the colorimetric protocol, the proof-of-concept was established. The fluorescence-based methodology, on the other hand, provided the basis for a quantitative interpretation of the data, affording a detection limit of 5 pM gDNA.     

Detection of Bacillus anthracis from spores and cells by loop-mediated isothermal amplification without sample preparation

Loop-mediated isothermal amplification (LAMP) is a technique capable of rapidly amplifying specific nucleic acid sequences without specialized thermal cycling equipment. In addition, several detection methods that include dye fluorescence, gel electrophoresis, turbidity and colorimetric change, can be used to measure or otherwise detect target amplification. To date, publications have described the requirement for some form of sample nucleic acid extraction (boiling, lysis, DNA purification, etc.) prior to initiating a LAMP reaction. We demonstrate here, the first LAMP positive results obtained from vegetative cells and spores of Bacillus anthracis without nucleic acid extraction. Our data show that the simple addition of cells or spores to the reaction mixture, followed by heating at 63°C is all that is required to reproducibly amplify and detect target plasmid and chromosomal DNA via colorimetric change. The use of three primer sets targeting both plasmids and the chromosome of B. anthracis allows for the rapid discrimination of non-pathogenic bacteria from pathogenic bacteria within 30 min of sampling. Our results indicate that direct testing of B. anthracis spores and cells via LAMP assay will greatly simplify and shorten the detection process by eliminating nucleic acid purification. These results may allow more rapid detection of DNA from pathogenic organisms present in field and environmental samples.     

Gold-based optical biosensor for single-mismatched DNA detection using salt-induced hybridization

In this study, a gold nanoparticle (Au-NP)-based detection method for sensitive and specific DNA-based diagnostic applications is described. A sandwich format consisting of Au-NPs/DNA/PMP (Streptavidin-coated MagnetSphere Para-Magnetic Particles) was fabricated. PMPs captured and separated target DNA while Au-NPs modified with oligonucleotide detection sequences played a role in recognition and signal production. Due to the much lower stability of mismatched DNA strands caused by unstable duplex structures in solutions of relatively low salt concentration, hybridization efficiency in the presence of different buffers was well investigated, and thus, the optimized salt concentration allowed for discrimination of single-mismatched DNA (MMT) from perfectly matched DNA (PMT). Therefore, quantitative information concerning the target analyte was translated into a colorimetric signal, which could easily and quantitatively measured by low-cost UV-vis spectrophotometric analysis. The results indicated this to be a very simple and economic strategy for detection of single-mismatched DNA strands.     

Hybridization assay at a disposable electrochemical biosensor for the attomole detection of amplified human cytomegalovirus DNA

A disposable electrochemical biosensor for the detection of DNA sequences related to the human cytomegalovirus (HCMV) is described. The sensor relies on the adsorption of an amplified human cytomegalovirus DNA strand onto the sensing surface of a screen-printed carbon electrode, and to its hybridization to a complementary single-stranded biotinylated DNA probe. The extent of hybrids formed was determined with streptavidin conjugated to horseradish peroxidase. The peroxidase label was indirectly quantified by measuring the amount of the chromophore and electroactive product 2,2'-diaminoazobenzene generated from the o-phenylenediamine substrate. The intensity of differential pulse voltammetric peak currents resulting from the reduction of the enzyme-generated product was related to the number of target HCMV-amplified DNA molecules present in the sample, and the results were compared to those obtained with standard methods, i.e., agarose gel electrophoresis quantification and colorimetric hybridization assay in a microtiter plate. A detection limit of 0.6 amol/ml of HCMV-amplified DNA fragment was obtained with the electrochemical DNA biosensor. The electrochemical method was 23,000-fold more sensitive than the gel electrophoresis technique and 83-fold more sensitive than the colorimetric hybridization assay in a microtiter plate.     

基于纳米金复合探针的基因芯片膜转印检测法

建立了一种基于纳米金复合探针的基因芯片膜转印核酸检测新方法。首先,用纳米金颗粒同时标记检测探针P2和两种长短不同且生物素化的信号探针 (T10,T40),其中检测探针与靶DNA 5￠端互补,两种信号探针起信号放大作用。当靶DNA分子存在时,芯片表面捕捉探针P1 (与靶DNA分子3￠端互补) 通过碱基互补配对原则结合靶DNA分子,将其固定于芯片上,同时检测探针通过与靶DNA 5￠端互补配对将纳米金复合探针结合于芯片表面,结果在芯片表面形成“三明治”结构,后通过链霉亲和素-生物素反应,使芯片表面对应有靶DNA分子的部位结合上碱性磷酸酶,最后利用BCIP/NBT显色系统使芯片表面信号结果镜面转印至尼龙膜表面。当检测探针和信号探针摩尔比为1∶10,T10和T40摩尔比为9:1时可以检测1 pmol/L合成靶DNA分子或0.23 pmol/L结核分枝杆菌16S rDNA PCR扩增产物,检测结果通过普通的光学扫描仪读取或肉眼直接判读信号有无。本芯片检测系统灵敏度高,操作方法简单、快速,不需要特殊仪器设备,在生物分子的检测方面具有较高的应用价值。     

Assays Based on Differential Adsorption of Single-stranded and Double-stranded DNA on Unfunctionalized Gold Nanoparticles in a Colloidal Suspension

Under certain conditions, single-stranded DNA adsorbs to negatively charged gold nanoparticles in a colloid whereas double-stranded DNA does not. We present evidence that this phenomenon can be explained by the difference in their electrostatic properties that in turn reflects conformational differences. The ability to discriminate the hybridization state of DNA on the basis of adsorption behavior can be utilized to design simple colorimetric and fluorimetric assays that take advantage of plasmon resonance in the gold nanoparticles. We present examples where we detect specific target sequences in oligonucleotides and in genomic DNA. Because conformational changes in special DNA sequences can also be induced by analytes such as potassium, we report a potassium ion detection scheme based on the same principle.     

Rapid colorimetric detection of in vitro amplified DNA sequences

A colorimetric assay to detect immobilized amplified nucleic acids has been designed. This approach provides a rapid assay, suitable for clinical diagnosis, to analyze DNA sequences amplified by the polymerase chain reaction. The specific DNA sequences are captured on a solid support by the use of a recombinant fusion protein consisting of the Escherichia coli lac repressor and staphylococcal protein A. The biotin streptavidin system is used to detect the immobilized material. Positive samples can be analyzed by direct solid-phase sequencing. Here, we show that this nonradioactive concept can be used for analysis of Staphylococci and Streptococci and for specific detection of the protozoa Plasmodium falciparum in clinical samples.     

Gold nanoparticles-based colorimetric assay for rapid detection of Salmonella species in food samples

A rapid, sensitive and cost-effective method was developed for detection of foodborne pathogens, particularly Salmonella species. The method utilizes single stranded DNA (ssDNA) probes and non-functionalized gold nanoparticles to provide a colorimetric assay for the detection of PCR amplified DNA. Different food samples were tested with the PCR-based colorimetric assay parallel with the conventional culture method. The sensitivity and specificity of colorimetric assay was 89.15 and 99.04% respectively with reference to conventional culture method. The total time required to detect the Salmonella spp. present in food samples by the developed method is less than 8 h, including 6 h incubation. It was observed that the colorimetric assay was 10 times more sensitive than gel-based detection with the same concentration of DNA used for analysis.     

Method for colorimetric detection of double-stranded nucleic acid using leuco triphenylmethane dyes

Because loop-mediated isothermal amplification (LAMP) can amplify substantial amounts of DNA under isothermal conditions, its applications for simple genetic testing have attracted considerable attention. A positive LAMP reaction is indicated by the turbidity caused by by-products or by the color change after adding a metallochromic indicator to the reaction solution, but these methods have certain limitations. Leuco crystal violet (LCV), a colorless dye obtained after sodium sulfite treatment of crystal violet (CV), was used as a new colorimetric method for detecting LAMP. LCV is reconverted into CV through contact with double-stranded DNA (dsDNA). Therefore, the positive reaction of LAMP is indicated by color change from colorless to violet. The assay is sensitive enough to detect LAMP products, with a detection limit of 7.1 ng/μl for dsDNA. It is also highly selective to dsDNA, and interference with single-stranded DNA and deoxynucleotide triphosphates (dNTPs) is not observed. LCV facilitates direct colorimetric detection of the main product rather than a by-product of the LAMP reaction; therefore, this method can be used under various reaction conditions such as those with added pyrophosphatase in solution. This colorimetric LAMP detection method using LCV is useful for point-of-care genetic testing given its simplicity.     

Modular plastic chip for one-shot human papillomavirus diagnostic analysis

In this article, we report the design and development of a plastic modular chip suitable for one-shot human papillomavirus (HPV) diagnostics, namely detection of the viral presence and relative genotyping, by two sequential steps performed directly on the same device. The device is composed of two modular and disposable plastic units that can be assembled or used separately. The first module is represented by a polydimethylsiloxane (PDMS) microreactor that is exploited for real-time polymerase chain reaction (PCR) and, thus, is suitable for detecting the presence of virus. The second unit is a PDMS microwell array that allows virus genotyping by a colorimetric assay, based on DNA hybridization technology developed on plastic, requiring simple inspection by the naked eye. The two modules can be easily coupled to reusable hardware, enabling the heating/cooling processes and the real-time detection of HPV. By coupling real-time assay and colorimetric genotyping on the same chip, the assembled device may provide a low-cost tool for HPV diagnostics, thereby favoring the prediction of cancer risk in patients.     

DNA microarray to detect and identify trichothecene- and moniliformin-producing Fusarium species

AIMS: To develop a DNA microarray for easy and fast detection of trichothecene- and moniliformin-producing Fusarium species. METHOD AND RESULTS: A DNA microarray was developed for detection and identification of 14 trichothecene- and moniliformin-producing species of the fungal genus Fusarium. The array could also differentiate between four species groups. Capture probes were designed based on recent phylogenetic analyses of translation elongation factor-1 alpha (TEF-1alpha) sequences. Particular emphasis was put on designing capture probes corresponding to groups or species with particular mycotoxigenic synthetic abilities. A consensus PCR amplification of a part of the TEF-1alpha is followed by hybridization to the Fusarium chip and the results are visualized by a colorimetric Silverquant detection method. We validated the Fusarium chip against five naturally infected cereal samples for which we also have morphological and chemical data. The limit of detection was estimated to be less than 16 copies of genomic DNA in spiked commercial wheat flour. CONCLUSIONS: The current Fusarium chip proved to be a highly sensitive and fast microarray for detection and identification of Fusarium species. We postulate that the method also has potential for (semi-)quantification. SIGNIFICANCE AND IMPACT OF THE STUDY: The Fusarium chip may prove to be a very valuable tool for screening of cereal samples in the food and feed production chain, and may facilitate detection of new or introduced Fusarium spp.     

Real-time colorimetric detection of target DNA using isothermal target and signaling probe amplification and gold nanoparticle cross-linking assay

We describe a facile gold nanoparticle (AuNP)-mediated colorimetric method for real-time detection of target DNA in conjugation with our unique isothermal target and signaling probe amplification (iTPA) method, comprising novel ICA (isothermal chain amplification) and CPT (cycling probe technology). Under isothermal conditions, the iTPA simultaneously amplifies the target and signaling probe through two displacement events induced by a combination of four specially designed primers, the strand displacement activity of DNA polymerase, and the RNA degrading activity of RNase H. The resulting target amplicons are hybridized with gold nanoparticle cross-linking assay (GCA) probes having a DNA-RNA-DNA chimeric form followed by RNA cleavage by RNase H in the CPT step. The intact GCA probes were designed to cross-link two sets of DNA-AuNPs conjugates in the absence of target DNA, inducing aggregation (blue color) of AuNPs. On the contrary, the presence of target DNA leads to cleavage of the GCA probes in proportion to the amount of amplified target DNA and the solution remains red in color without aggregation of AuNPs. Relying on this strategy, 10(2) copies of target Chlamydia trachomatis plasmid were successfully detected in a colorimetric manner. Importantly, all the procedures employed up to the final detection of the target DNA were performed under isothermal conditions without requiring any detection instruments. Therefore, this strategy would greatly benefit convenient, real-time monitoring technology of target DNA under restricted environments.     

Detection of pathogenic bacteria in shellfish using multiplex PCR followed by CovaLink NH microwell plate sandwich hybridization

Outbreak of diseases associated with consumption of raw shellfish especially oysters is a major concern to the seafood industry and public health agencies. A multiplex PCR amplification of targeted gene segments followed by DNA-DNA sandwich hybridization was optimized to detect the etiologic agents. First, a multiplex PCR amplification of hns, spvB, vvh, ctx and tl was developed enabling simultaneous detection of total Salmonella enterica serotype Typhimurium, Vibrio vulnificus, Vibrio cholerae and Vibrio parahaemolyticus from both pure cultures and seeded oysters. Amplicons were then subjected to a colorimetric CovaLink NH microwell plate sandwich hybridization using phosphorylated and biotinlylated oligonucleotide probes, the nucleotide sequences of which were located internal to the amplified DNA. The results from the hybridization with the multiplexed PCR amplified DNA exhibited a high signal/noise ratio ranging between 14.1 and 43.2 measured at 405 nm wavelength. The sensitivity of detection for each pathogen was 10(2) cells/g of oyster tissue homogenate. The results from this study showed that the combination of the multiplex PCR with a colorimetric microwell plate sandwich hybridization assay permits a specific, sensitive, and reproducible system for the detection of the microbial pathogens in shellfish, thereby improving the microbiological safety of shellfish to consumers.     

Comparison of DNA and RNA quantification methods suitable for parameter estimation in metabolic modeling of microorganisms

Recent developments in cellular and molecular biology require the accurate quantification of DNA and RNA in large numbers of samples at a sensitivity that enables determination on small quantities. In this study, five current methods for nucleic acid quantification were compared: (i) UV absorbance spectroscopy at 260 nm, (ii) colorimetric reaction with orcinol reagent, (iii) colorimetric reaction based on diphenylamine, (iv) fluorescence detection with Hoechst 33258 reagent, and (v) fluorescence detection with thiazole orange reagent. Genomic DNA of three different microbial species (with widely different G+C content) was used, as were two different types of yeast RNA and a mixture of equal quantities of DNA and RNA. We can conclude that for nucleic acid quantification, a standard curve with DNA of the microbial strain under study is the best reference. Fluorescence detection with Hoechst 33258 reagent is a sensitive and precise method for DNA quantification if the G+C content is less than 50%. In addition, this method allows quantification of very low levels of DNA (nanogram scale). Moreover, the samples can be crude cell extracts. Also, UV absorbance at 260 nm and fluorescence detection with thiazole orange reagent are sensitive methods for nucleic acid detection, but only if purified nucleic acids need to be measured.     

DNA hybridization assay using ATTOPHOS, a fluorescent substrate for alkaline phosphatase.

A fluorometric procedure for the detection of DNA-DNA hybrids is described. The procedure involved the detection of probe-bound alkaline phosphatase with the fluorescent substrate ATTOPHOS. This substrate is converted to ATTOFLUOR by alkaline phosphatase and fluoresces strongly at 550 nm when excited with a wavelength of 440 nm. DNA hybridization assays were performed both with dilutions of purified target plasmid DNA (pSE9 or PBR322) and whole bacterial cells. Streptavidin-alkaline phosphatase conjugates were added to react with bound probe. Fluorometric assays, as well as colorimetric assays, using 5-bromo-4-chloro-3-indolylphosphate + nitroblue tetrazolium for alkaline phosphatase activity were performed. The fluorescence of the substrate was measured at time intervals, and the slope of the regression line calculated. A slope four times greater than that of background was considered positive. One hundred femtograms or 2.2 x 10(4) molecules of homologous DNA were detected with the fluorescent assay as compared with 10,000 femtograms or 2.2 x 10(6) molecules of homologous DNA with the colorimetric assay. Similar results were obtained with whole cells. Approximately 1 x 10(3) homologous cells were detected fluorometrically and 1 x 10(5) cells were detected colorimetrically. Based on these results, we conclude that, in our hands, the DNA hybridization assay described here using ATTOPHOS as the substrate for alkaline phosphatase is a very sensitive assay for the detection of DNA-DNA hybrids.     

Detection of proteins using a colorimetric bio-barcode assay

The colorimetric bio-barcode assay is a red-to-blue color change-based protein detection method with ultrahigh sensitivity. This assay is based on both the bio-barcode amplification method that allows for detecting miniscule amount of targets with attomolar sensitivity and gold nanoparticle-based colorimetric DNA detection method that allows for a simple and straightforward detection of biomolecules of interest (here we detect interleukin-2, an important biomarker (cytokine) for many immunodeficiency-related diseases and cancers). The protocol is composed of the following steps: (i) conjugation of target capture molecules and barcode DNA strands onto silica microparticles, (ii) target capture with probes, (iii) separation and release of barcode DNA strands from the separated probes, (iv) detection of released barcode DNA using DNA-modified gold nanoparticle probes and (v) red-to-blue color change analysis with a graphic software. Actual target detection and quantification steps with premade probes take approximately 3 h (whole protocol including probe preparations takes approximately 3 days).     

A colorimetric detection method of pesticide acetamiprid by fine-tuning aptamer length

This work investigates the effect of shortening aptamer sequences on the colorimetric detection of acetamiprid using aptamer-wrapped gold nanoparticles (AuNPs). Truncated 37-mer and 25-mer aptamers were generated by deleting excess flanking nucleotides from parental 49-mer acetamiprid-target aptamer. In comparing the responses of the three sequences, truncated aptamers did not improve the ability to discriminate against other tested pesticides. However, comparison between 49-mer and other shorter aptamers showed that shortening aptamer sequences through removing excess flanking nucleotides outsides of binding region improved colorimetric sensitivity for acetamiprid by 3.3 fold. Due to excess bases, the target-bound aptamer might still adhere to AuNPs, resulting in incomplete dissociation of aptamer from AuNPs and therefore the suppression of aggregation responses. This work provides further insight to the effects of aptamer structure on detection of the target, as well as a method by fine-tuning aptamer length for rapid detection of pesticide residues in environments or food.     

A new approach for point mutation detection based on a ligase chain reaction.

A new method for the identification of point mutations is proposed. The method is based on ligase chain reaction (LCR) and it includes a procedure for correction of ligation by Cleavase. Reaction products are detected by a colorimetric method after adsorption of the resulting DNA duplexes to the solid phase. One strand of LCR products carries biotin to be bound on a streptavidin-coated microwell. Another strand contains a single-stranded region that is to be coupled with an oligonucleotide carrying a substrate for colorimetric detection. The suggested method has two advantages: (i) use of Cleavase increases the accuracy of ligation and (ii) a template independent ligation does not occur in LCR due to a special design of primers.     

Photopolymerization as an innovative detection technique for low-density microarrays

One limitation that accounts in part for the scarcity of commercially available diagnostic microarrays is the expense associated with fluorescence detection. Here we present a colorimetric method based on photopolymerization as an "on-chip" signal amplification technique. Proof of principle experiments are detailed and followed by the use of a simple influenza microarray to demonstrate the technique for the first time with clinical samples. The advantages of this new technique include rapid (<5 min) signal amplification ( approximately 105) in ambient conditions for both DNA and protein microarrays, low reagent cost (<$1 per assay), visual or inexpensive detection, and signal preservation for at least two years under ambient conditions.