Validation and application of an intervertebral disc finite element model utilizing independently constructed tissue-level constitutive formulations that are nonlinear,anisotropic, and time-dependent

Finite element (FE) models are advantageous in the study of intervertebral disc mechanics as the stress–strain distributions can be determined throughout the tissue and the applied loading and material properties can be controlled and modified. However, the complicated nature of the disc presents a challenge in developing an accurate and predictive disc model, which has led to limitations in FE geometry, material constitutive models and properties, and model validation. The objective of this study was to develop a new FE model of the intervertebral disc, to validate the model?s nonlinear and time-dependent responses without tuning or calibration, and to evaluate the effect of changes in nucleus pulposus (NP), cartilaginous endplate (CEP), and annulus fibrosus (AF) material properties on the disc mechanical response. The new FE disc model utilized an analytically-based geometry. The model was created from the mean shape of human L4/L5 discs, measured from high-resolution 3D MR images and averaged using signed distance functions. Structural hyperelastic constitutive models were used in conjunction with biphasic-swelling theory to obtain material properties from recent tissue tests in confined compression and uniaxial tension. The FE disc model predictions fit within the experimental range (mean±95% confidence interval) of the disc?s nonlinear response for compressive slow loading ramp, creep, and stress-relaxation simulations. Changes in NP and CEP properties affected the neutral-zone displacement but had little effect on the final stiffness during slow-ramp compression loading. These results highlight the need to validate FE models using the disc?s full nonlinear response in multiple loading scenarios.     

Comparison of cellular response in bovine intervertebral disc cells and articular chondrocytes: effects .of lipopolysaccharide on proteoglycan metabolism

Lipopolysaccharide (LPS) induces matrix degradation and markedly stimulates the production of several cytokines, i.e., interleukin-1β, −6, and −10, by disc cells and chondrocytes. We performed a series of experiments to compare cellular responses of cells from the bovine intervertebral disc (nucleus pulposus and annulus fibrosus) and from bovine articular cartilage to LPS. Alginate beads containing cells isolated from bovine intervertebral discs and articular cartilage were cultured with or without LPS in the presence of 10% fetal bovine serum. The DNA content and the rate of proteoglycan synthesis and degradation were determined. In articular chondrocytes, LPS strongly suppressed cell proliferation and proteoglycan synthesis in a dose-dependent manner and stimulated proteoglycan degradation. Compared with articular chondrocytes, nucleus pulposus cells responded in a similar, although less pronounced manner. However, treatment of annulus fibrosus cells with LPS showed no significant effects on proteoglycan synthesis or degradation. A slight, but statistically significant, inhibition of cell proliferation was observed at high concentrations of LPS in annulus fibrosus cells. Thus, LPS suppressed proteoglycan synthesis and stimulated proteoglycan degradation by articular chondrocytes and nucleus pulposus cells. The effects of LPS on annulus fibrosus cells were minor compared with those on the other two cell types. The dissimilar effects of LPS on the various cell types suggest metabolic differences between these cells and may further indicate a divergence in pathways of LPS signaling and a differential sensitivity to exogenous stimuli such as LPS.This work was supported in part by NIH grants 2-P50-AR39239 and 1-P01-AR48152.     

A new non-enzymatic method for isolating human intervertebral disc cells preserves the phenotype of nucleus pulposus cells

Cells isolated from intervertebral disc (IVD) tissues of human surgical samples are one of potential sources for the IVD cellular therapy. The purpose of this study was to develop a new non-enzymatic method, “tissue incubation”, for isolating human IVD cells. The IVD tissues of annulus fibrosus (AF) and nucleus pulposus (NP) were incubated separately in tissue culture flasks with culture medium. After 7–10 days incubation, cells were able to migrate out of IVD tissues and proliferate in vitro. After 3–4 weeks culture, expanded cells were harvested by trypsinization, and the remaining tissues were transferred to a new flask for another round of incubation. The molecular phenotype of IVD cells from juvenile and adult human samples was evaluated by both flow cytometry analysis and immunocytochemical staining for the expression of protein markers of NP cells (CD24, CD54, CD239, integrin α6 and laminin α5). Flow cytometry confirmed that both AF and NP cells of all ages positively expressed CD54 and integrin α6, with higher expression levels in NP cells than in AF cells for the juvenile group sample. However, CD24 expression was only found in juvenile NP cells, and not in AF or older disc cells. Similar expression patterns for NP markers were also confirmed by immunocytochemistry. In summary, this new non-enzymatic tissue incubation method for cell isolation preserves molecular phenotypic markers of NP cells and may provide a valuable cell source for the study of NP regeneration strategies.     

Cell shape and gene expression in human intervertebral disc cells: in vitro tissue engineering studies

The objective of the present study was to examine the relation between gene expression and the shape of human intervertebral disc cells cultured in vitro in three-dimensional (3D) scaffolds. Disc cells from 19 subjects were seeded into either a collagen sponge or collagen gel and cultured for 10 days. In situ hybridization was performed on serial sections of paraffin embedded specimens and assessed for expression of selected genes important for extracellular matrix formation: Types I and II collagen, aggrecan and chondroitin-6 sulfotransferase. Rounded cells grown in collagen gel showed expression of Types I and II collagen, aggrecan and chondroitin-6 sulfotransferase; expression of these genes was absent in spindle shaped cells. Cells in the collagen sponge that lay on the sponge margin were frequently spindle shaped; these cells expressed type I collagen, but not type II collagen, aggrecan or chondroitin-6 sulfotransferase. Results presented here provide novel data concerning disc cell gene expression with collagen 3D constructs. This information is useful for future tissue engineering studies that have the challenging goal of selectively modulating gene expression.     

Cell shape and gene expression in human intervertebral disc cells: in vitro tissue engineering studies

The objective of the present study was to examine the relation between gene expression and the shape of human intervertebral disc cells cultured in vitro in three-dimensional (3D) scaffolds. Disc cells from 19 subjects were seeded into either a collagen sponge or collagen gel and cultured for 10 days. In situ hybridization was performed on serial sections of paraffin embedded specimens and assessed for expression of selected genes important for extracellular matrix formation: Types I and II collagen, aggrecan and chondroitin-6 sulfotransferase. Rounded cells grown in collagen gel showed expression of Types I and II collagen, aggrecan and chondroitin-6 sulfotransferase; expression of these genes was absent in spindle shaped cells. Cells in the collagen sponge that lay on the sponge margin were frequently spindle shaped; these cells expressed type I collagen, but not type II collagen, aggrecan or chondroitin-6 sulfotransferase. Results presented here provide novel data concerning disc cell gene expression with collagen 3D constructs. This information is useful for future tissue engineering studies that have the challenging goal of selectively modulating gene expression.     

Predicting permeability of regular tissue engineering scaffolds: scaling analysis of pore architecture,scaffold length,and fluid flow rate effects

The main aim of this research is to numerically obtain the permeability coefficient in the cylindrical scaffolds. For this purpose, a mathematical analysis was performed to derive an equation for desired porosity in terms of morphological parameters. Then, the considered cylindrical geometries were modeled and the permeability coefficient was calculated according to the velocity and pressure drop values based on the Darcy’s law. In order to validate the accuracy of the present numerical solution, the obtained permeability coefficient was compared with the published experimental data. It was observed that this model can predict permeability with the utmost accuracy. Then, the effect of geometrical parameters including porosity, scaffold pore structure, unit cell size, and length of the scaffolds as well as entrance mass flow rate on the permeability of porous structures was studied. Furthermore, a parametric study with scaling laws analysis of sample length and mass flow rate effects on the permeability showed good fit to the obtained data. It can be concluded that the sensitivity of permeability is more noticeable at higher porosities. The present approach can be used to characterize and optimize the scaffold microstructure due to the necessity of cell growth and transferring considerations.     

Recent advances in biological therapies for disc degeneration: tissue engineering of the annulus fibrosus,nucleus pulposus and whole intervertebral discs

1. Download : Download high-res image (144KB)
2. Download : Download full-size image

     

Formation and characterization of three dimensional human hepatocyte cell line spheroids on chitosan matrix for in vitro tissue engineering applications

Chitosan was used as a matrix to induce three-dimensional spheroids of HepG2 cells. Chitosan films were prepared and used for culturing Hep G2 cells. Attachment kinetics of the cells was studied on the chitosan films. The optimum seeding density of the Hep G2 cells, required for three-dimensional spheroid formation was determined and was found to be 5 × 10⁴/ml. The growth kinetics of Hep G2 cells was studied using (3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) (MTT) assay, and morphology of the cells was studied through optical photographs taken at various days of culture. The liver cell functions of the spheroids were determined by measuring albumin and urea secretions. The results obtained from these studies have shown that the culture of Hep G2 cells on chitosan matrix taking appropriate seeding density resulted in the formation of three-dimensional spheroids and exhibited higher amount of albumin and urea synthesis compared to monolayer culture. These miniature “liver tissue like” models can be used for in vitro tissue engineering applications like preliminary evaluation of the toxicity of drugs and chemicals.     

Alcoholic fixation over formalin fixation: A new,safer option for morphologic and molecular analysis of tissues

Formalin is a widely used fixative but there is potential public health risks to exposure. Besides, alcoholic fixation is advantageous over formalin fixation because of faster fixation, optimal preservation and safer workplace environment. Following fixation by EMA and 10% neutral buffered formalin (NBF), we analyzed the tissue morphology, antigenic stability, DNA and RNA quantity with quality (OD value). The findings of EMA fixing on both the tissue morphology and molecular characterization, were satisfactory. Specially, EMA was faster in penetration of tissues than NBF, fixed ideally as early as 8 h of fixation whereas improper fixation was evident for NBF. In Hematoxylin and Eosin (H & E) staining, better cellular details with stronger affinity for staining were observed. In immunohistochemistry, better antigenic stability was reported for EMA-fixed tissues. The nucleic acid analysis revealed that total genomic DNA and RNA yield from EMA fixed tissues were significantly higher (P < 0.05) with superior quality than NBF fixed tissues. Our results suggest that EMA could be a potential alternative to NBF for fixation and preservation of tissues. These data provide new insights into an option for a safer working environment to support study and research.     

Phospholipase A2 engineering: design, synthesis, and expression of a gene for bovine (pro)phospholipase A2

A gene coding for the (pro)phospholipase A2 (PLA2) from bovine pancreas has been designed, synthesized, and expressed in Escherichia coli. The gene was designed with a variety of restriction sites that will facilitate future mutagenesis studies. Codons occurring frequently in prokaryotic systems were chosen whenever possible. The total gene spans 404 base pairs and was divided into 33 oligonucleotides. The gene was constructed in two halves of 224 and 180 base pairs from the oligonucleotides by the shotgun ligation technique using pBSM13- as the cloning vehicle. The two fragments were then ligated and cloned into pBSM13- to complete the gene. The (pro)PLA2 gene was then verified by restriction site mapping and dideoxy sequencing. The gene was expressed to high levels from a high copy number vector, designated as pJPN, derived from the E. coli secretion vector pIN-III-ompA3. Although the protein failed to be excreted and was in the form of insoluble inclusion body, active PLA2 could be obtained by renaturation of the inclusion body pellet followed by tryptic activation, which removes the signal sequence and the pro-peptide of proPLA2. The PLA2 thus obtained reacted with the antisera raised against the natural PLA2 purified from bovine pancreas, and the specific activity of the expressed PLA2 was identical to that of the natural PLA2. The shotgun ligation and synthetic gene approaches are simple and inexpensive and can be adapted to express most of the enzymes in the phospholipase A2 family.