Skin viscoelasticity studied in vitro by microprobe-based techniques

Time-dependent deformation of porcine skin was studied in vitro using specialized microprobe instruments. The deformation behavior of stratum corneum, dermis, and whole skin is examined in the context of results of creep strain, elastic stiffness, and viscoelastic constants obtained in terms of the hold time, loading/unloading rate, and maximum indentation depth (load). Skin time-dependent deformation is significantly influenced by dermis viscoelasticity up to a critical indentation depth (load) beyond which it is controlled by the outermost hard epidermis, particularly stratum corneum. Skin viscoelastic behavior under constant load (creep) and constant displacement (stress relaxation) is interpreted in the light of phenomenological observations and experimental trends.     

Assessment of penetration of quantum dots through in vitro and in vivo human skin using the human skin equivalent model and the tape stripping method

Quantum dots (QDs) are rapidly emerging as an important class of nanoparticles (NPs) with potential applications in medicine. However, little is known about penetration of QDs through human skin. This study investigated skin penetration of QDs in both in vivo and in vitro human skin. Using the tape stripping method, this study demonstrates for the first time that QDs can actually penetrate through the stratum corneum (SC) of human skin. Transmission electron microscope (TEM) and energy diverse X-ray (EDX) analysis showed accumulation of QDs in the SC of a human skin equivalent model (HSEM) after dermal exposure to QDs. These findings suggest possible transdermal absorption of QDs after dermal exposure over a relatively long period of time.     

In vitro study of the impact of mechanical tension on the dermal fibroblast phenotype in the context of skin wound healing

Skin wound healing is finely regulated by both matrix synthesis and degradation which are governed by dermal fibroblast activity. Actually, fibroblasts synthesize numerous extracellular matrix proteins (i.e., collagens), remodeling enzymes and their inhibitors. Moreover, they differentiate into myofibroblasts and are able to develop endogenous forces at the wound site. Such forces are crucial during skin wound healing and have been widely investigated. However, few studies have focused on the effect of exogenous mechanical tension on the dermal fibroblast phenotype, which is the objective of the present paper. To this end, an exogenous, defined, cyclic and uniaxial mechanical strain was applied to fibroblasts cultured as scratch-wounded monolayers. Results showed that fibroblasts? response was characterized by both an increase in procollagen type-I and TIMP-1 synthesis, and a decrease in MMP-1 synthesis. The monitoring of scratch-wounded monolayers did not show any decrease in kinetics of the filling up when mechanical tension was applied. Additional results obtained with proliferating fibroblasts and confluent monolayer indicated that mechanical tension-induced response of fibroblasts depends on their culture conditions. In conclusion, mechanical tension leads to the differentiation of dermal fibroblasts and may increase their wound-healing capacities. So, the exogenous uniaxial and cyclic mechanical tension reported in the present study may be considered in order to improve skin wound healing.     

In vitro antiamyloidogenic properties of 1,4-naphthoquinones

The aim of this study is to find out whether several 1,4-naphthoquinones (1,4-NQ) can interact with the amyloidogenic pathway of the amyloid precursor protein processing, particularly targeting at β-secretase (BACE), as well as at β-amyloid peptide (Aβ) aggregation and disaggregating preformed Aβ fibrils. Compounds bearing hydroxyl groups at the quinoid (2) or benzenoid rings (5, 6) as well as some 2- and 3-aryl derivatives (11-15) showed BACE inhibitory activity, without effect on amyloid aggregation or disaggregation. The halogenated compounds 8 and 10 were selective for the inhibition of amyloid aggregation. On the other hand, 1,4-naphthoquinone (1), 6-hydroxy-1,4-naphthoquinone (4) and 2-(3,4-dichlorophenyl)-1,4-naphthoquinone (26) did not show any BACE inhibitory activity but were active on amyloid aggregation and disaggregation preformed Aβ fibrils. Juglone (5-hydroxy-1,4-naphthoquinone (3), and 3-(p-hydroxyphenyl)-5-methoxy-1,4-napththoquinone (19) were active on all the three targets. Therefore, we suggest that 1,4-NQ derivatives, specially 3 and 19, should be explored as possible drug candidates or lead compounds for the development of drugs to prevent amyloid aggregation and neurotoxicity in Alzheimer’s disease.     

A zymogel enhances the self-cleaning abilities of the skin of the pilot whale (Globicephala melas)

Enzyme activity in the stratum corneum of the pilot whale Globicephala melas was investigated employing colorimetric enzyme screening assays combined with NATIVE PAGE, size exclusion chromatography (SEC) and histochemical staining procedures. Applying different substrates, several enzymes were detected. The histochemical demonstration of some selected hydrolytic enzymes enriched in the stratum corneum showed high extracellular accumulation. As demonstrated by size exclusion chromatography, high molar mass aggregates were built up from a glycoprotein-rich 20-30-kD fraction. Using NATIVE PAGE experiments under non-reducing conditions, a selection of five degrading enzymes was recovered within the above-reported aggregates. Activity of extracellular aggregate-attached enzymes in the superficial layer of the stratum corneum exhibited no remarkable decrease potentially resulting from self-degradation. We thus conclude that due to their enclosure within the microenvironment of aggregates, a zymogel is formed and autolysis of the stratum corneum is reduced. With respect to the skin surface, the zymogel with hydrolytic activities covering major parts of it enhances the self-cleaning abilities of the skin of the pilot whale based on physical pre-requisites by hydrolyzing adhesive glycoconjugates of settling biofouling organisms considered as primary steps in fouling.     

In vivo characterization of the mechanical properties of human skin derived from MRI and indentation techniques

The human skin is an exceedingly complex and multi-layered material. This paper aims to introduce the application of the finite element analysis (FEA) to the in vivo characterization of the non-linear mechanical behaviour of three human skin layers. Indentation tests combined with magnetic resonance imaging (MRI) technique have been performed on the left dorsal forearm of a young man in order to reveal the mechanical behaviour of all skin layers. Using MRI images processing and a pre and post processor allows to make numerically individualized 2D model which consists of three skin layers and the muscles. FEA has been applied to simulate indentation tests. Neo-Hookean slightly compressible material model of two material constants (C₁₀, K) has been used to model the mechanical behaviour of the three skin layers and the muscles. The identification of material model parameters was done by applying Levenberg–Marquardt algorithm (LMA). Our methodology of identification provides a range of values for each constant. Range of values of different material properties of epidermis, dermis, hypodermis are respectively, C10_E = 0.12 ± 0.06 MPa, C10_D = 1.11 ± 0.09 MPa, C10_H = 0.42 ± 0.05 KPa, K _E = 5.45 ± 1.7 MPa, K _D = 29.6 ± 1,28 MPa, K _H = 36.0 ± O.9 KPa.     

The effect of the chain length distribution of free fatty acids on the mixing properties of stratum corneum model membranes

The stratum corneum (SC) plays a fundamental role in the barrier function of the skin. The SC consists of corneocytes embedded in a lipid matrix. The main lipid classes in the lipid matrix are ceramides (CERs), cholesterol (CHOL) and free fatty acids (FFAs). The aim of this study was to examine the effect of the chain length of FFAs on the thermotropic phase behavior and mixing properties of SC lipids. Fourier transform infrared spectroscopy and Raman imaging spectroscopy were used to study the mixing properties using either protonated or deuterated FFAs. We selected SC model lipid mixtures containing only a single CER, CHOL and either a single FFA or a mixture of FFAs mimicking the FFA SC composition. The single CER consists of a sphingoid base with 18 carbon atoms and an acyl chain with a chain length of 24 carbon atoms. When using lignoceric acid (24 carbon atoms) or a mixture of FFAs, the CER and FFAs participated in mixed crystals, but hydration of the mixtures induced a slight phase separation between CER and FFA. The mixed crystalline structures did not phase separate during storage even up to a time period of 3 months. When using palmitic acid (16 carbon atoms), a slight phase separation was observed between FFA and CER. This phase separation was clearly enhanced during hydration and storage. In conclusion, the thermotropic phase behavior and the mixing properties of the SC lipid mixtures were shown to strongly depend on the chain length and chain length distribution of FFAs, while hydration enhanced the phase separation.     

In vitro and in vivo anti-inflammatory properties of imine resveratrol analogues

Resveratrol is a natural polyphenol found mainly on red grapes and in red wine, pointed as an important anti-inflammatory/immunomodulatory molecule. However, its bioavailability problems have limited its use encouraging the search for new alternatives agents. Thus, in this study, we synthetize 12 resveratrol analogues (6 imines, 1 thioimine and 5 hydrazones) and investigated its cytotoxicity, antioxidant activity and in vitro anti-inflammatory/immunomodulatory properties. The most promising compounds were also evaluated in vivo. The results showed that imines presented less cytotoxicity, were more effective than resveratrol on DPPH scavenger and exhibited an anti-inflammatory profile. Among them, the imines with a radical in the para position, on the ring B, not engaged in an intramolecular hydrogen-interaction, showed more prominent anti-inflammatory activity modulating, in vivo, the edema formation, the inflammatory infiltration and cytokine levels. An immunomodulatory activity also was observed in these molecules. Thus, our results suggest that imines with these characteristics presents potential to control inflammatory disorders.     

Role of sunscreen formulation and photostability to protect the biomechanical barrier function of skin

The impact of sunscreen formulations on the barrier properties of human skin are often overlooked leading to formulations with components whose effects on barrier mechanical integrity are poorly understood. The aim of this study is to demonstrate the relevance of carrier selection and sunscreen photostability when designing sunscreen formulations to protect the biomechanical barrier properties of human stratum corneum (SC) from solar ultraviolet (UV) damage. Biomechanical properties of SC samples were assayed after accelerated UVB damage through measurements of the SC's mechanical stress profile and corneocyte cohesion. A narrowband UVB (305–315 nm) lamp was used to expose SC samples to 5, 30, 125, and 265 J cm^?2 in order to magnify damage to the mechanical properties of the tissue and characterize the UV degradation dose response such that effects from smaller UV dosages can be extrapolated. Stresses in the SC decreased when treated with sunscreen components, highlighting their effect on the skin prior to UV exposure. Stresses increased with UVB exposure and in specimens treated with different sunscreens stresses varied dramatically at high UVB dosages. Specimens treated with sunscreen components without UVB exposure exhibited altered corneocyte cohesion. Both sunscreens studied prevented alteration of corneocyte cohesion by low UVB dosages, but differences in protection were observed at higher UVB dosages indicating UV degradation of one sunscreen. These results indicate the protection of individual sunscreen components vary over a range of UVB dosages, and components can even cause alteration of the biomechanical barrier properties of human SC before UV exposure. Therefore, detailed characterization of sunscreen formulation components is required to design robust protection from UV damage.     

In vitro and in vivo biosynthesis of xanthophylls by the cyanobacterium Aphanocapsa

Of the six carotenoids identified in the cyanobacterium Aphanocapsa, β-carotene, zeaxanthin, echinenone and myxoxanthophyll are the major pigments, whilst β-cryptoxanthin and 3-hydroxy-4-keto-β-carotene are present only in trace amounts. With the exception of zeaxanthin, the other xanthophylls could be formed in vitro from [¹⁴C]phytoene in high yields, especially β-cryptoxanthin and 3-hydroxy-4-keto-β-carotene. In a time course experiment of xanthopyll biosynthesis the flow of radioactivity from [¹⁴C]phytoene was followed through the pools of phytofluene, lycopene, and β-carotene. The reaction sequence from phytoene to xanthophylls is sensitive in vitro to both difunone, an inhibitor of carotene desaturation, and CPTA, an inhibitor of cyclization.     

In vitro stereoselective hydrolysis of diacylglycerols by hormone-sensitive lipase

Hormone-sensitive lipase (HSL) contributes importantly to the mobilization of fatty acids in adipocytes and shows a substrate preference for the diacylglycerols (DAGs) originating from triacylglycerols. To determine whether HSL shows any stereopreference during the hydrolysis of diacylglycerols, racemic 1,2(2,3)-sn-diolein was used as a substrate and the enantiomeric excess (ee%) of residual 1,2-sn-diolein over 2,3-sn-diolein was measured as a function of DAG hydrolysis. Enantiomeric DAGs were separated by performing chiral-stationary-phase HPLC after direct derivatization from lipolysis product extracts. The fact that the ee% of 1,2-sn-diolein over 2,3-sn-diolein increased with the level of hydrolysis indicated that HSL has a preference for 2,3-sn-diolein as a substrate and therefore a stereopreference for the sn-3 position of dioleoylglycerol. The ee% of 1,2-sn-diolein reached a maximum value of 36% at 42% hydrolysis. Among the various mammalian lipases tested so far, HSL is the only lipolytic carboxylester hydrolase found to have a pronounced stereospecificity for the sn-3 position of dioleoylglycerol.     

In vitro carotenogenesis by wild type and mutants of Phycomyces blakesleeanus

Cell extracts from shake cultures of the wild type and six mutant strains of Phycomyces converted [2-¹⁴C] MVA into carotenes, squalene and prenyl phosphates. Oxygen was required for the desaturation of phytoene. When compared with the wild type, cells extracts of carB and carR mutants are much less effective in phytoene dehydrogenation and lycopene cyclization, respectively. This confirms previous conclusions about the biochemical functions of the carB and carR genes, which were based on genetic and in vivo studies. CarA strain mutants accumulate, in vivo, much less β-carotene than the wild type. This correlates with a 10-fold decrease in carotenogenesis in vitro. The addition of retinol to incubations of cell extracts of the wild type and C2 strains stimulated β-carotene formation. Both carB and carR mutants show enhanced total carotenogenic activities in vitro and the carS mutant shows a higher β-carotene-synthesizing activity than the wild type. It is suggested that the feed-back regulatory mechanism known to control this pathway operates at the level of enzyme synthesis.     

In vitro effects of exercise on the heart

Pathologic and physiologic factors acting on the heart can produce consistent pressure changes, volume overload, or increased cardiac output. These changes may then lead to cardiac remodeling, ultimately resulting in cardiac hypertrophy. Exercise can also induce hypertrophy, primarily physiologic in nature. To determine the mechanisms responsible for each type of remodeling, it is important to examine the heart at the functional unit, the cardiomyocyte. Tests of individual cardiomyocyte function in vitro provide a deeper understanding of the changes occurring within the heart during hypertrophy. Examination of cardiomyocyte function during exercise primarily follows one of two pathways: the addition of hypertrophic inducing agents in vitro to normal cardiomyocytes, or the use of trained animal models and isolating cells following the development of hypertrophy in vivo. Due to the short lifespan of adult cardiomyocytes, a proportionately scant amount of research exists involving the direct stimulation of cells in vitro to induce hypertrophy. These attempts provide the only current evidence, as it is difficult to gather extensive data demonstrating cell growth as a result of in vitro physical stimulation. Researchers have created ways to combine skeletal myocytes with cardiomyocytes to produce functional muscle cells used to repair pathologic heart tissue, but continue to struggle with the short lifespan of these cells. While there have been promising findings regarding the mechanisms that surround cardiac hypertrophy in vitro, the translation of in vitro findings to in vivo function is not consistent. Therefore, the focus of this review is to highlight recent studies that have investigated the effect of exercise on the heart, both in vitro and in vivo.     

In vitro development of the strobilar stage of Mesocestoides corti

Thompson R. C. A., Jue Sue L. P. and Buckley S. J. 1982. In vitro development of the strobilar stage of Mesocestoides corti. International Journal for Parasitology12: 303–314. Sexually mature strobilated adults of Mesocestoides corti were grown consistently from undifferentiated tetrathyridia in vitro using a conventional diphasic culture system. Development (growth, strobilisation and maturation) was compared in vitro and in vivo. Although growth and strobilisation were comparable in vitro and in vivo, during the first 18 days, total length and numbers of proglottids decreased in vivo but continued to increase in vitro after day 18. Both male and female reproductive systems appeared to develop normally in vitro and self copulation was frequently observed in cultured worms. However, fully developed oncospheres were not produced in vitro.     

The role of ceramide chain length distribution on the barrier properties of the skin lipid membranes

The skin barrier function is provided by the stratum corneum (SC). The lipids in the SC are composed of three lipid classes: ceramides (CERs), cholesterol (CHOL) and free fatty acids (FFAs) which form two crystalline lamellar structures. In the present study, we investigate the effect of CER chain length distribution on the barrier properties of model lipid membranes mimicking the lipid composition and organization of SC. The membranes were prepared with either isolated pig CERs (PCERs) or synthetic CERs. While PCERs have a wide chain length distribution, the synthetic CERs are quite uniform in chain length. The barrier properties were examined by means of permeation studies using hydrocortisone as a model drug. Our studies revealed a reduced barrier in lipid membranes prepared with PCERs compared to synthetic CERs. Additional studies revealed that a wider chain length distribution of PCERs results in an enhanced hexagonal packing and increased conformational disordering of the lipid tails compared to synthetic CERs, while the lamellar phases did not change. This demonstrates that the chain length distribution affects the lipid barrier by reducing the lipid ordering and density within the lipid lamellae. In subsequent studies, the effect of increased levels of FFAs or CERs with a long acyl chain in the PCERs membranes was also studied. These changes in lipid composition enhanced the level of orthorhombic packing, reduced the conformational disordering and increased the barrier of the lipid membranes. In conclusion, the CER chain length distribution is an important key factor for maintaining a proper barrier.     

In vitro synthesis of phosphatidylinositol and phosphatidylcholine by phospholipase D

Phosphatidylinositol (PI) was prepared from egg lecithin by a one-step transphosphatidylation reaction catalysed by phospholipase D in the presence of myo-inositol. Similarly phosphatidylcholine (PC) has been synthesized by the same technique from egg phosphatidylethanolamine using phospholipase D and choline chloride.The yield of PI was ca 25 % and that of PC ca 28 %. The transphosphatidylase function of phospholipase D offers a useful route for the synthesis of different classes of phospholipids.     

In vitro study of the aortic interleaflet triangle reshaping

Aortic interleaflet triangle reshaping (AITR) is a surgical approach to aortic valve incontinence that involves placing three stitches at half of the interleaflet triangles height. In this work, the relationship between the actual stitch height and valve functioning, and the safety margin that the surgeon can rely on in applying the stitches were systematically investigated in vitro. AITR surgery was applied to six swine aortic roots placing the stitches empirically at 50%, 60% and 75% of the triangle heights. Then the actual stitch heights were measured and the hydrodynamic performances were evaluated with a pulsatile hydrodynamic mock loop. Actual stitch heights were 45±2%, 61±4% and 79±6%. As compared to untreated conditions, the 50% configuration induced a significant variation in the effective orifice area. With stitches placed at 60%, the mean systolic pressure drop increased significantly with respect to the untreated case, but no significant changes were recorded with respect to the 50% configuration. At 75%, all the hydrodynamic parameters of systolic valve functioning worsened significantly. Summarizing, the AITR technique, when performed in a conservative manner did not induce significant alterations in the hydrodynamics of the aortic root in vitro, while more aggressive configurations did. The absence of a statistically significant difference between the 50% and 60% configurations suggests that there is a reasonably limited risk of inducing valve stenosis in the post-op scenario due to stitch misplacement.     

An in vitro model for the pathological degradation of articular cartilage in osteoarthritis

The objective of this study was to develop an in vitro cartilage degradation model that emulates the damage seen in early-stage osteoarthritis. To this end, cartilage explants were collagenase-treated to induce enzymatic degradation of collagen fibers and proteoglycans at the articular surface. To assess changes in mechanical properties, intact and degraded cartilage explants were subjected to a series of confined compression creep tests. Changes in extracellular matrix structure and composition were determined using biochemical and histological approaches. Our results show that collagenase-induced degradation increased the amount of deformation experienced by the cartilage explants under compression. An increase in apparent permeability as well as a decrease in instantaneous and aggregate moduli was measured following collagenase treatment. Histological analysis of degraded explants revealed the presence of surface fibrillation, proteoglycan depletion in the superficial and intermediate zones and loss of the lamina splendens. Collagen cleavage was confirmed by the Col II–3/4C_short antibody. Degraded specimens experienced a significant decrease in proteoglycan content but maintained total collagen content. Repetitive testing of degraded samples resulted in the gradual collapse of the articular surface and the compaction of the superficial zone. Taken together, our data demonstrates that enzymatic degradation with collagenase can be used to emulate changes seen in early-stage osteoarthritis. Further, our in vitro model provides information on cartilage mechanics and insights on how matrix changes can affect cartilage's functional properties. More importantly, our model can be applied to develop and test treatment options for tissue repair.     

In vitro synthesis of mycolic acids by the fluffy layer fraction of Bacterionema matruchotii

Biosynthetic activity for mycolic acid occurred in the fluffy layer fraction but not in the 5000g supernatant of Bacterionema matruchotii. With [1-¹⁴C]palmitic acid as precursor for the in vitro system, the predominant product was identified as C_32:0 mycolic acid by radio-gas-liquid chromatographie (radio-GLC) and gas chromatographic/mass spectroscopic analyses; if [1-¹⁴C]stearic acid was used, two major radioactive peaks appeared on GLC: one corresponding to the peak of (C_34:0 + C_34:1) mycolic acids and the other to (C_36:0 + C_36:1) mycolic acids. By pyrolysis/radio-GLC analysis, C_32:0 mycolic acid synthesized by [1-¹⁴C]palmitic acid was pyrolyzed at 300 °C to form palmitaldehyde (the mero moiety) and methyl palmitate (the branch moiety). The pH optimum for the incorporation of [1-¹⁴C]palmitate into bacterionema mycolic acids was 6.4 and the reaction required a divalent cation. The in vitro system utilized myristic, palmitic, stearic and oleic acids (probably via their activated forms) well as precursors, among which myristic and palmitic acids were more effective than the rest. Avidin showed no effect on the biosynthesis of mycolic acid from ¹⁴C-palmitate whereas cerulenin, a specific inhibitor of β-ketoacyl synthetase in de novo fatty acid synthesis, inhibited the reaction at a relatively higher concentration. Thin-layer chromatographic analysis of lipids extracted from the reacting mixture without alkaline hydrolysis showed that both exogenous [1-¹⁴] fatty acid and synthesized mycolic acids were bound to an unknown compound by an alkali-labile linkage and this association seemed to occur prior to the condensation of two molecules of fatty acid.     

A multiscale study on the structural and mechanical properties of the luffa sponge from Luffa cylindrica plant

Cellular materials that are often observed in biological systems exhibit excellent mechanical properties at remarkably low densities. Luffa sponge is one of such materials with a complex interconnecting porous structure. In this paper, we studied the relationship between its structural and mechanical properties at different levels of its hierarchical organization from a single fiber to a segment of whole sponge. The tensile mechanical behaviors of three single fibers were examined by an Instron testing machine and the ultrastructure of a fractured single fiber was observed in a scanning electronic microscope. Moreover, the compressive mechanical behaviors of the foam-like blocks from different locations of the sponge were examined. The difference of the compressive stress–strain responses of four sets of segmental samples were also compared. The result shows that the single fiber is a porous composite material mainly consisting of cellulose fibrils and lignin/hemicellulose matrix, and its Young?s modulus and strength are comparable to wood. The mechanical behavior of the block samples from the hoop wall is superior to that from the core part. Furthermore, it shows that the influence of the inner surface on the mechanical property of the segmental sample is stronger than that of the core part; in particular, the former?s Young?s modulus, strength and strain energy absorbed are about 1.6 times higher. The present work can improve our understanding of the structure–function relationship of the natural material, which may inspire fabrication of new biomimetic foams with desirable mechanical efficiency for further applications in anti-crushing devices and super-light sandwich panels.