Electrochemical characteristics of platinum electrodes coated with cytochrome b5-phospholipid monolayers

Platinum electrodes can be coated with cytochrome b5-phospholipid monolayers by the Langmuir-Blodgett technique. Cyclic voltammetry of a series of dyes shows that the coated electrodes become selective for certain electroactive species. The electron transfer reactions of negatively charged species are inhibited at the modified electrode, whereas positively charged species show enhanced reactivity compared with that at a bare metal electrode.     

Reversible capture of genomic DNA by a Nafion-coated electrode

A method in which an electrode itself is used as the sample preparation microchip is described. The gold electrode was coated with an ion-permeable polymer, Nafion, to prevent the permanent adsorption and destruction of DNA. The modified electrode was able to capture as much DNA as the bare gold electrode and to release the captured DNA effectively, whereas the bare gold electrode could not release bound DNA. The elution efficiency was greater than 70% for the Nafion-coated electrode, whereas it was less than 10% for the bare electrode. The DNA obtained was undamaged and could be amplified by polymerase chain reaction.     

Site-specific covalent attachment of heme proteins on self-assembled monolayers

Naturally occurring hemin cofactor has been functionalized to introduce two terminal alkyne groups. This modified hemin has been successfully covalently attached to mixed self-assembled monolayers of alkanethiols and azide-terminated alkanethiols on gold electrodes using a Cu(I)-catalyzed 1,3-cycloaddition reaction. However these hemin-modified electrodes could not be used to reconstitute apomyoglobin on gold electrodes owing to the hydrophobicity of the alkane thiol self-assembled monolayer. Modification of existing techniques allowed covalent attachment of alkyne-terminated electroactive species onto mixed monolayers of azidothiols and carboxylatoalkanethiols on electrodes using the same Cu(I)-catalyzed 1,3-cycloaddition reaction. Apomyoglobin could be reconstituted using the hemin covalently attached to these hydrophilic electrodes. The electrochemical data, UV-vis absorption data, surface-enhanced resonance Raman spectroscopy data, and atomic force microscopy data indicate the presence of these modified myoglobin proteins on these electrodes. The direct attachment of the heme cofactor of these modified myoglobin proteins to the electrode allows fast electron transfer to the heme center from the electrode and affords efficient O(2)-reducing bioelectrodes under physiological conditions.     

Immobilization of glucose oxidase on thin-film gold electrodes produced by magnetron sputtering and their application in an electrochemical biosensor

An electrochemical biosensor is described consisting of a thin-layer gold film electrode prepared by cathodic sputtering using a poly(vinyl chloride) sheet as substrate, with voltammetric behaviour comparable to that of conventional polycrystalline gold electrodes, coated with the hydrolysed copolymer hydroxyethyl methacrylate-co-methyl methacrylate onto which glucose oxidase was immobilized. The mechanical properties of the plastic foil substrate permit easy construction of circular-shaped electrodes which were employed as working electrodes for batch injection analysis. The electrochemical biosensor fabrication is inexpensive and can be used as disposable enzyme sensor for the detection of hydrogen peroxide. The biosensor was tested for the determination of glucose in serum and a good correlation was obtained with the measurement using the electrochemical and the spectrophotometric methods.     

Hybridization biosensor using di(2,2'-bipyridine)osmium (III) as electrochemical indicator for detection of polymerase chain reaction product of hepatitis B virus DNA

A novel hepatitis B virus (HBV) DNA biosensor was developed by immobilizing covalently single-stranded HBV DNA fragments to a gold electrode surface via carboxylate ester to link the 3(')-hydroxy end of the DNA with the carboxyl of the thioglycolic acid (TGA) monolayer. A short-stranded HBV DNA fragment (181bp) of known sequence was obtained and amplified by PCR. The surface hybridization of the immobilized single-stranded HBV DNA fragment with its complementary DNA fragment was evidenced by electrochemical methods using [Os(bpy)(2)Cl(2)](+) as a novel electroactive indicator. The formation of double-stranded HBV DNA on the gold electrode resulted in a great increase in the peak currents of [Os(bpy)(2)Cl(2)](+) in comparison with those obtained at a bare or single-stranded HBV DNA-modified electrode. The mismatching experiment indicated that the surface hybridization was specific. The difference between the responses of [Os(bpy)(2)Cl(2)](+) at single-stranded and double-stranded DNA/TGA gold electrodes suggested that the label-free hybridization biosensor could be conveniently used to monitor DNA hybridization with a high sensitivity. X-ray photoelectron spectrometry technique has been employed to characterize the immobilization of single-stranded HBV DNA on a gold surface.     

Amperometric glucose biosensor based on gold-deposited polyvinylferrocene film on Pt electrode

The preparations and performances of the novel amperometric biosensors for glucose based on immobilized glucose oxidase (GOD) on modified Pt electrodes are described. Two types of modified electrodes for the enzyme immobilization were used in this study, polyvinylferrocene (PVF) coated Pt electrode and gold deposited PVF coated Pt electrode. A simple method for the immobilization of GOD enzyme on the modified electrodes was described. The enzyme electrodes developed in this study were called as PVF-GOD enzyme electrode and PVF-Au-GOD enzyme electrode, respectively. The amperometric responses of the enzyme electrodes were measured at constant potential, which was due to the electrooxidation of enzymatically produced H2O2. The electrocatalytic effects of the polymer, PVF, and the gold particles towards the electrooxidation of the enzymatically generated H2O2 offers sensitive and selective monitoring of glucose. The biosensor based on PVF-Au-GOD electrode has 6.6 times larger maximum current, 3.8 times higher sensitivity and 1.6 times larger linear working portion than those of the biosensor based on PVF-GOD electrode. The effects of the applied potential, the thickness of the polymeric film, the amount of the immobilized enzyme, pH, the amount of the deposited Au, temperature and substrate concentration on the responses of the biosensors were investigated. The optimum pH was found to be pH 7.4 at 25 degrees C. Finally the effects of interferents, stability of the biosensors and applicability to serum analysis of the biosensor were also investigated.     

Active site structure and dynamics of cytochrome c3 from Desulfovibrio gigas immobilized on electrodes

Cytochrome c3 from Desulfovibrio gigas is electrostatically adsorbed on Ag electrodes coated with self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid. The redox equilibria and electron transfer dynamics of the adsorbed four-heme protein are studied by surface enhanced resonance Raman spectroscopy. Immobilization on the coated electrodes does not cause any structural changes in the redox sites. The potential-dependent stationary experiments distinguish the redox potential of heme IV (-0.19 V versus normal hydrogen electrode) from those of the other hemes for which an average value of -0.3 V is determined. Taking into account the interfacial potential drops, these values are in good agreement with the redox potentials of the protein in solution. The heterogenous electron transfer between the electrode and heme IV of the adsorbed cytochrome c3 is analyzed on the basis of time-resolved experiments, leading to a formal electron transfer rate constant of 15 s(-1), which is a factor of 3 smaller than that of the monoheme protein cytochrome c.     

A new interference-free lysine biosensor using a non-conducting polymer film

An electrochemical biosensor for the determination of lysine to be used for rapid evaluation of food quality has been developed. Platinum electrodes have been coated by electropolymerisation with 1,2-diaminobenzene (1.2-DAB) using cyclic voltammetry. The reduction in the oxidation of interferents compared with the bare platinum electrode was 100% for ascorbic acid, 99% for acetaminophen and 99% for cysteine. The enzyme L-lysine--oxidase was then immobilised onto the polymer layer by passive adsorption and a calibration curve for lysine constructed. This gave a linear range of 1×10⁻⁵ mol/l to 1×10⁻³ mol/l and a limit of detection of 2×10⁻⁷ mol/l.     

Investigation of interfacial capacitance of Pt,Ti and TiN coated electrodes by electrochemical impedance spectroscopy

Electrochemical processes at the electrode-electrolyte (body fluid) interface are of ultimate importance for stimulating/sensing electrode function. A high electrode surface area is desirable for safe stimulation through double-layer charging and discharging. Pt and Pt-Ir alloys have been the most common electrode materials. The use of TiN coating as the surface layer on the electrode has found increasing interest because of its metal-like conductivity, excellent mechanical and chemical properties, and the fact that it can be deposited with a high surface area. In this work, electrochemical impedance spectroscopy (EIS), which is a sensitive and non-destructive technique and widely used for characterization of electrical properties of electrode-electrolyte interfaces, was applied to investigate pure Pt and Ti, and TiN coated electrodes exposed to a phosphate-buffered-saline (PBS) solution. Platinized Pt and Ti were also studied for comparison. The capacitance value of the electrodes in PBS was obtained through quantitative analysis of the EIS spectra. The results reveal that the capacitance of the TiN coated electrodes with a rough surface is several hundreds times higher than that of a smooth Pt surface. Platinization of Ti can also increase the capacitance to the same extent as platina. EIS has been shown to be a powerful technique for characterization of stimulating/sensing electrodes.     

Optimizing the Tin Selenide (SnSe) Allotrope/Gold-Based Surface Plasmon Resonance Sensors for Enhanced Sensitivity

The 2D material tin selenide monolayer (SnSe) has attracted a lot of attention due to its excellent optoelectronic properties. This study focuses on the investigation of the potential improvement of the response of surface plasmon resonance (SPR) sensors by coating the gold layer with SnSe allotrope (α, δ, ε) monolayers. Using an optimization algorithm along with the transfer matrix method (TMM), we determined the optimal thickness of the gold layer as a function of the number of monolayers added to significantly increase the sensor’s response in terms of reflectivity and phase. With respect to reflectivity, sensitivity increased by 20% in comparison with the optimal bare gold structure, whilst with respect to phase, sensitivity was approximately two orders of magnitude greater than the bare gold structure. Our results demonstrate that SPR sensors modified with SnSe monolayers could be used in diagnostic applications where both high sensitivity and small concentration of analyte are required.

     

Nature of immobilized antibody layers linked to thioctic acid treated gold surfaces

Utilization of 125I-labeled IgG enables an investigation of protein immobilized to gold electrodes sputter deposited on microporous nylon membranes, including the precise nature of the surface-protein bond (i.e. covalent or non-specific adsorption), physical location of the immobilized protein (i.e. on the surface of the gold electrode or within the pores of the membrane), and the amount of protein immobilized. This is accomplished by comparing the mass of protein immobilized to gold surfaces that have been treated in several different fashions, as well as, deposition of the gold on nylon membranes that have been treated differently. It is shown that these microporous gold electrodes, proposed previously for conducting novel non-separation electrochemical enzyme immunoassays, consist of multiple protein layers non-specifically adsorbed. Approximately, half of the total adsorbed protein is immobilized to the gold surface with the remaining protein bound within the pores on the nylon membrane.     

Real-time investigation of the interaction between primaquine phosphate and bovine serum albumin (BSA) by piezoelectric quartz crystal impedance analysis

Real-time investigation of the interaction between primaquine phosphate and bovine serum albumin by the piezoelectric quartz crystal impedance (PQCI) analysis was carried out for the first time. Three kinds of electrodes were investigated. Compared with bare gold (Au) electrode, the gold electrode self-assembled of nanogold colloids exhibits maintained biocompatibility, increased capacity and more bioactivity. Additionally, on the basis of the multi-dimensional information provided by the PQCI analysis, the real-time interaction information and the kinetics of the binding process was investigated and a response model was deduced. At 37 degrees C, the binding rate (k1), dissociation rate (k(-1)) and equilibrium constants (Ka) were 4.19x10(2) (mol l(-1))(-1) s(-1), 1.01x10(-3) s(-1) and 4.15x10(5) (mol l(-1))(-1) for the electrode modified by nanogold particles; 3.83x10(2) (mol l(-1))(-1) s(-1), 9.70x10(-4) s(-1) and 3.95x10(5) (mol l(-1))(-1) for the bare gold electrode, respectively.     

Development of a direct-binding chloramphenicol sensor based on thiol or sulfide mediated self-assembled antibody monolayers

A batch-type antibody-immobilized quartz crystal microbalance (QCM) system for detecting chloramphenicol (CAP) was developed. To bind an anti-CAP antibody onto the gold electrode surface of piezoelectric crystals, self-assembled monolayers (SAMs) of different thiols or sulfides were formed by a chemisorption procedure. Then, the anti-CAP antibody was covalently linked to the pre-formed monolayers by an activation procedure using 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride and N-hydroxysulfosuccinimide. The antibody-immobilized QCM chip thus prepared was installed in a well holder and was measured for sensor response. Compared with the bare QCM chip and the QCM chip only coated with 3-mercaptopropionic acid (MPA), the antibody-immobilized sensor showed greatly enhanced frequency shifts by 10-50-fold after CAP injection. In this case, CAP detection which was indicated by steady-state resonant frequency shift was accomplished within 10 min. When CAP solution was injected into the reaction cell in 50mM concentration, the frequency shifts obtained were, respectively, 530 and 505 Hz in case of thiosalicylic acid and MPA immobilization. Repeated use of the sensor chips up to eight times was possible after 1 min regeneration with 0.1M NaOH. This system demonstrated a potential application of thiol or sulfide mediated SAMs as the pre-coatings of a real-time detection on CAP in solution.     

A new interference-free lysine biosensor using a non-conducting polymer film

An electrochemical biosensor for the determination of lysine to be used for rapid evaluation of food quality has been developed. Platinum electrodes have been coated by electropolymerisation with 1,2-diaminobenzene (1.2-DAB) using cyclic voltammetry. The reduction in the oxidation of interferents compared with the bare platinum electrode was 100% for ascorbic acid, 99% for acetaminophen and 99% for cysteine. The enzyme L-lysine-α-oxidase was then immobilised onto the polymer layer by passive adsorption and a calibration curve for lysine constructed. This gave a linear range of 1×10⁻⁵ mol/l to 1×10⁻³ mol/l and a limit of detection of 2×10⁻⁷ mol/l.     

Electrical recognition of label-free oligonucleotides upon streptavidin-modified electrode surfaces

For the purpose of developing a direct label-free electrochemical detection system, we have systematically investigated the electrochemical signatures of each step in the preparation procedure, from a bare gold electrode to the hybridization of label-free complementary DNA, for the streptavidin-modified electrode. For the purpose of this investigation, we obtained the following pertinent data; cyclic voltammogram measurements, electrochemical impedance spectra and square wave voltammogram measurements, in Fe(CN)₆ ³⁻/Fe(CN)₆ ⁴⁻ solution (which was utilized as the electron transfer redox mediator). The oligonucleotide molecules on the streptavidin-modified electrodes exhibited intrinsic redox activity in the ferrocyanide-mediated electrochemical measurements. Furthermore, the investigation of electrochemical electron transfer, according to the sequence of oligonucleotide molecules, was also undertaken. This work demonstrates that direct label-free oligonucleotide electrical recognition, based on biofunctional streptavidin-modified gold electrodes, could lead to the development of a new biosensor protocol for the expansion of rapid, cost-effective detection systems.     

Screen-printed electrodes based on carbon nanotubes and cytochrome P450scc for highly sensitive cholesterol biosensors

This paper is concerned with an investigation of electron transfer between cytochrome P450scc (CYP11A1) immobilized on nanostructured rhodium-graphite electrodes. Multi-walled carbon nanotubes (MWCNT) were deposited onto the rhodium-graphite electrodes by drop casting. Cytochrome P450scc was deposited onto MWCNT-modified rhodium-graphite electrodes. Cytochrome P450scc was also deposited onto both gold nanoparticle-modified and bare rhodium-graphite electrodes, in order to have a comparison with our previous works in this field. Cyclic voltammetry indicated largest enhanced activity of the enzyme at the MWCNT-modified surface. The role of the nanotubes in mediating electron transfer to the cytochrome P450scc was verified as further improved with respect to the case of rhodium-graphite electrodes modified by the use of gold nanoparticles. The sensitivity of our system in cholesterol sensing is higher by orders of magnitude with respect to other similar systems very recently published that are based on cholesterol oxidase and esterase. The electron transfer improvement attained by the use of MWCNT in P450-based cholesterol biosensors was demonstrated to be larger than 2.4 times with respect to the use of gold nanoparticles and 17.8 times larger with respect to the case of simple bare electrodes. The sensitivity was equal to 1.12muA/(mMmm(2)) and the linearity of the biosensor response was improved with respect to the use of gold nanoparticles.     

Secretion of Catecholamines from Individual Adrenal Medullary Chromaffin Cells

Abstract: Catecholamine secretion has been measured with electrochemical techniques from isolated, single adrenal medullary chromaffin cells with carbon-fiber microelectrodes. The electrode tip, which is of similar dimensions to the cell, is placed adjacent to the cell to enable the measurement of local secretion. Secretion is caused by exposing the cell to nanoliter volumes of solution containing nicotinic receptor agonists or depolarizing agents. The identification of secreted substances is made with cyclic voltammetry at both bare electrodes and electrodes coated with a perfluorinated cationexchange polymer. Catecholamine secretion is induced by nicotine (10–500 μ M ), carbamylcholine (1 m M ), and K⁺ (60 m M ). All agents that induce secretion lead to a broad envelope of secreted catecholamines on which sharp concentration spikes are superimposed. The concentration spikes can be monitored with a time resolution of tens of milliseconds when the electrodes are used in the amperometric mode. Release induced by nicotine and K⁺ is inhibited by Cd²⁺ (0.5 m M ), and hexamethonium selectively blocks the nicotineinduced secretion. The actions of nicotine are found to continue for a longer period of time than those of the other secretagogues tested.     

Comparison of colloidal gold electrode fabrication methods: the preparation of a horseradish peroxidase enzyme electrode.

In order to prepare biosensing electrodes which respond to hydrogen peroxide, horseradish peroxidase has been adsorbed to colloidal gold sols and electrodes prepared by deposition of these enzyme-gold sols onto glassy carbon using three methods: evaporation, electrodeposition and electrolyte deposition. In the latter method the enzyme-gold sol is applied to the surface of a glassy carbon disk electrode followed by an equal volume of 2 mM CaCl2. The electrolyte causes the sol to precipitate on the electrode surface, producing an immobilized enzyme electrode. Satisfactory electrodes which gave an electrochemical response to hydrogen peroxide in the presence of the electron transfer mediator ferrocenecarboxylic acid were produced by all three methods. Evaporation of horseradish peroxidase-gold sols produced electrodes with the best reproducibility and the widest linear amperometric response range. These electrodes can also easily be stored in a dry state. Although not as good as evaporation, electrodeposition also produced satisfactory electrodes. Electro-deposition provides the added advantage that it lends itself to the preparation of multi-enzyme/multi-analyte electrodes by the adsorption of different enzymes to separate gold sols, followed by sequential electrodeposition onto discrete areas of a multichannel electrode.     

Electric measurements can be used to monitor the attachment and spreading of cells in tissue culture.

A new electrical assay to measure the attachment and spreading of cells in tissue culture has been developed and substantiated by comparison with a more conventional assay. Small gold electrodes are vacuum deposited on the bottom of standard polystyrene culture dishes and coated with various proteins. As mammalian fibroblasts attach and spread on these surfaces, the measured impedance of the electrodes changes. These impedance changes reflect the amount of area blocked by the spreading cells. Since the weak electrical signals used have no noticeable effects on the cells, this is a very convenient method that is both quantitative and sensitive for measuring cell attachment and spreading.     

Electrochemical immunoanalysis of cardiac myoglobin

Methods of myoglobin determination based on electrochemical analysis by means of analysis of electrochemical parameters of modified electrodes have been proposed. The method of direct detection is based on interaction of myoglobin with anti-myoglobin with subsequent electrochemical registration of this hemoprotein. The electrode surface was modified by a membrane-like synthetic didodecyldimethylammonium bromide (DDAB), gold nanoparticles and antibodies to human cardiac myoglobin the electrochemical reduction of myoglobin heme was registered provided that the antigen (myoglobin) was present in the samples. The reaction of myoglobin binding to antibodies immobilized on the electrode surface was also registered using electrochemical impedance spectroscopy. The study of electro analytical characteristics revealed high specificity and sensitivity of the developed method. The biosensor was characterized by low detection limit and a high working range of the detected concentrations from 17.8 to 1780 ng/ml (from 1 to 100 nM). The method of myoglobin determination based on a signal of gold nanoparticles has also been proposed. The signal was detected with stripping voltammetry. There was a change in the cathodic peak area and the peak height of gold oxide reduction for the electrodes with antibodies and the electrodes with the antibody-myoglobin complex.