Peptide-membrane interactions and mechanisms of membrane destruction by amphipathic α-helical antimicrobial peptides

Antimicrobial peptides (AMPs) have received considerable interest as a source of new antibiotics with the potential for treatment of multiple-drug resistant infections. An important class of AMPs is composed of linear, cationic peptides that form amphipathic α-helices. Among the most potent of these are the cecropins and synthetic peptides that are hybrids of cecropin and the bee venom peptide, mellitin. Both cecropins and cecropin-mellitin hybrids exist in solution as unstructured monomers, folding into predominantly α-helical structures upon membrane binding with their long helical axis parallel to the bilayer surface. Studies using model membranes have shown that these peptides intercalate into the lipid bilayer just below the level of the phospholipid glycerol backbone in a location that requires expansion of the outer leaflet of the bilayer, and evidence from a variety of experimental approaches indicates that expansion and thinning of the bilayer are common characteristics during the early stages of antimicrobial peptide-membrane interactions. Subsequent disruption of the membrane permeability barrier may occur by a variety of mechanisms, leading ultimately to loss of cytoplasmic membrane integrity and cell death.     

Antimicrobial peptides: new candidates in the fight against bacterial infections

Antimicrobial peptides (AMPs) of innate origin are agents of the most ancient form of defense systems. They can be found in a wide variety of species ranging from bacteria through insects to humans. Through the course of evolution, host organisms developed arsenals of AMPs that protect them against a large variety of invading pathogens including both Gram-negative and Gram-positive bacteria. At a time of increasing bacterial resistance, AMPs have been the focus of investigation in a number of laboratories worldwide. Although recent studies show that some of the peptides are likely to have intracellular targets, the vast majority of AMPs appear to act by permeabilization of the bacterial cell membrane. Their activity and selectivity are governed by the physicochemical parameters of the peptide chains as well as the properties of the membrane system itself. In this review, we will summarize some of the recent developments that provide us with a better understanding of the mode of action of this unique family of antibacterial agents. Particular attention will be given to the determinants of AMP-lipid bilayer interactions as well as to the different pore formation mechanisms. The emphasis will be on linear AMPs but representatives of cysteine-bridged AMPs will also be discussed.     

SFG studies on interactions between antimicrobial peptides and supported lipid bilayers

The mode of action of antimicrobial peptides (AMPs) in disrupting cell membrane bilayers is of fundamental importance in understanding the efficiency of different AMPs, which is crucial to design antibiotics with improved properties. Recent developments in the field of sum frequency generation (SFG) vibrational spectroscopy have made it a powerful and unique biophysical technique in investigating the interactions between AMPs and a single substrate supported planar lipid bilayer. We will review some of the recent progress in applying SFG to study membrane lipid bilayers and discuss how SFG can provide novel information such as real-time bilayer structure change and AMP orientation during AMP-lipid bilayer interactions in a very biologically relevant manner. Several examples of applying SFG to monitor such interactions between AMPs and a dipalmitoyl phosphatidylglycerol (DPPG) bilayer are presented. Different modes of actions are observed for melittin, tachyplesin I, d-magainin 2, MSI-843, and a synthetic antibacterial oligomer, demonstrating that SFG is very effective in the study of AMPs and AMP-lipid bilayer interactions.     

SFG studies on interactions between antimicrobial peptides and supported lipid bilayers

The mode of action of antimicrobial peptides (AMPs) in disrupting cell membrane bilayers is of fundamental importance in understanding the efficiency of different AMPs, which is crucial to design antibiotics with improved properties. Recent developments in the field of sum frequency generation (SFG) vibrational spectroscopy have made it a powerful and unique biophysical technique in investigating the interactions between AMPs and a single substrate supported planar lipid bilayer. We will review some of the recent progress in applying SFG to study membrane lipid bilayers and discuss how SFG can provide novel information such as real-time bilayer structure change and AMP orientation during AMP-lipid bilayer interactions in a very biologically relevant manner. Several examples of applying SFG to monitor such interactions between AMPs and a dipalmitoyl phosphatidylglycerol (DPPG) bilayer are presented. Different modes of actions are observed for melittin, tachyplesin I, d-magainin 2, MSI-843, and a synthetic antibacterial oligomer, demonstrating that SFG is very effective in the study of AMPs and AMP-lipid bilayer interactions.     

Hybrids made from antimicrobial peptides with different mechanisms of action show enhanced membrane permeabilization

Combining two known antimicrobial peptides (AMPs) into a hybrid peptide is one promising avenue in the design of agents with increased antibacterial activity. However, very few previous studies have considered the effect of creating a hybrid from one AMP that permeabilizes membranes and another AMP that acts intracellularly after translocating across the membrane. Moreover, very few studies have systematically evaluated the order of parent peptides or the presence of linkers in the design of hybrid AMPs. Here, we use a combination of antibacterial measurements, cellular assays and semi-quantitative confocal microscopy to characterize the activity and mechanism for a library of sixteen hybrid peptides. These hybrids consist of permutations of two primarily membrane translocating peptides, buforin II and DesHDAP1, and two primarily membrane permeabilizing peptides, magainin 2 and parasin. For all hybrids, the permeabilizing peptide appeared to dominate the mechanism, with hybrids primarily killing bacteria through membrane permeabilization. We also observed increased hybrid activity when the permeabilizing parent peptide was placed at the N-terminus. Activity data also highlighted the potential value of considering AMP cocktails in addition to hybrid peptides. Together, these observations will guide future design efforts aiming to design more active hybrid AMPs.     

Insect antimicrobial peptides and their applications

Insects are one of the major sources of antimicrobial peptides/proteins (AMPs). Since observation of antimicrobial activity in the hemolymph of pupae from the giant silk moths Samia Cynthia and Hyalophora cecropia in 1974 and purification of first insect AMP (cecropin) from H. cecropia pupae in 1980, over 150 insect AMPs have been purified or identified. Most insect AMPs are small and cationic, and they show activities against bacteria and/or fungi, as well as some parasites and viruses. Insect AMPs can be classified into four families based on their structures or unique sequences: the α-helical peptides (cecropin and moricin), cysteine-rich peptides (insect defensin and drosomycin), proline-rich peptides (apidaecin, drosocin, and lebocin), and glycine-rich peptides/proteins (attacin and gloverin). Among insect AMPs, defensins, cecropins, proline-rich peptides, and attacins are common, while gloverins and moricins have been identified only in Lepidoptera. Most active AMPs are small peptides of 20–50 residues, which are generated from larger inactive precursor proteins or pro-proteins, but gloverins (~14 kDa) and attacins (~20 kDa) are large antimicrobial proteins. In this mini-review, we will discuss current knowledge and recent progress in several classes of insect AMPs, including insect defensins, cecropins, attacins, lebocins and other proline-rich peptides, gloverins, and moricins, with a focus on structural-functional relationships and their potential applications.     

Experimental and simulation studies reveal mechanism of action of human defensin derivatives

Antimicrobial peptides (AMPs) are naturally occurring promising candidates which can be used as antibiotics against a wide variety of bacteria. The key component for using them as a potent antibiotic is that their mechanism of action is less prone to bacterial resistance. However, the molecular details of their mechanism of action is not yet fully understood. In this study, we try to shed light on the mode of action of AMPs, possible reason behind it, and their interaction with lipid bilayers through experimental as well as molecular dynamics (MD) simulation studies. The focal of our study was Human beta defensin 3 (hBD-3) which is a naturally occurring AMP. We chose three derivatives of hBD-3, namely CHRG01, KSR, and KLR for the detailed analysis presented in this study. These three peptides are evaluated for their antibacterial potency, secondary structure analysis and mechanism of action. The experimental results reveal that these peptides are active against gram positive as well as gram negative bacteria and kill bacteria by forming membrane pores. The MD simulation results correlate well with the antibacterial activity and shed light into the early membrane insertion dynamics. Moreover, the specific amino acids responsible for membrane disruptions are also identified from the MD simulations. Understanding the molecular level interaction of individual amino acids with the lipid bilayer will greatly help in the design of more efficient antimicrobial peptides.     

Membrane insertion and bilayer perturbation by antimicrobial peptide CM15

Antimicrobial peptides (AMPs) are an important component of innate immunity and have generated considerable interest as a potential new class of antibiotic. The biological activity of AMPs is strongly influenced by peptide-membrane interactions; however, for many of these peptides the molecular details of how they disrupt and/or translocate across target membranes are not known. CM15 is a linear, synthetic hybrid AMP composed of the first seven residues of the cecropin A and residues 2-9 of the bee venom peptide mellitin. Previous studies have shown that upon membrane binding CM15 folds into an alpha-helix with its helical axis aligned parallel to the bilayer surface and have implicated the formation of 2.2-3.8 nm pores in its bactericidal activity. Here we report site-directed spin labeling electron paramagnetic resonance studies examining the behavior of CM15 analogs labeled with a methanethiosulfonate spin label (MTSL) and a brominated MTSL as a function of increasing peptide concentration and utilize phospholipid-analog spin labels to assess the effects of CM15 binding and accumulation on the physical properties of membrane lipids. We find that as the concentration of membrane-bound CM15 is increased the N-terminal domain of the peptide becomes more deeply immersed in the lipid bilayer. Only minimal changes are observed in the rotational dynamics of membrane lipids, and changes in lipid dynamics are confined primarily to near the membrane surface. However, the accumulation of membrane-bound CM15 dramatically increases accessibility of lipid-analog spin labels to the polar relaxation agent, nickel (II) ethylenediaminediacetate, suggesting an increased permeability of the membrane to polar solutes. These results are discussed in relation to the molecular mechanism of membrane disruption by CM15.     

The structure, dynamics and orientation of antimicrobial peptides in membranes by multidimensional solid-state NMR spectroscopy

Linear peptide antibiotics have been isolated from amphibians, insects and humans and used as templates to design cheaper and more potent analogues for medical applications. Peptides such as cecropins or magainins are < or = 40 amino acids in length. Many of them have been prepared by solid-phase peptide synthesis with isotopic labels incorporated at selected sites. Structural analysis by solid-state NMR spectroscopy and other biophysical techniques indicates that these peptide antibiotics strongly interact with lipid membranes. In bilayer environments they exhibit amphipathic alpha-helical conformations and alignments of the helix axis parallel to the membrane surface. This contrasts the transmembrane orientations observed for alamethicin or gramicidin A. Models that have been proposed to explain the antibiotic and pore-forming activities of membrane-associated peptides, as well as other experimental results, include transmembrane helical bundles, wormholes, carpets, detergent-like effects or the in-plane diffusion of peptide-induced bilayer instabilities.     

Cell-penetrating peptides and antimicrobial peptides: how different are they?

Some cationic peptides, referred to as CPPs (cell-penetrating peptides), have the ability to translocate across biological membranes in a non-disruptive way and to overcome the impermeable nature of the cell membrane. They have been successfully used for drug delivery into mammalian cells; however, there is no consensus about the mechanism of cellular uptake. Both endocytic and non-endocytic pathways are supported by experimental evidence. The observation that some AMPs (antimicrobial peptides) can enter host cells without damaging their cytoplasmic membrane, as well as kill pathogenic agents, has also attracted attention. The capacity to translocate across the cell membrane has been reported for some of these AMPs. Like CPPs, AMPs are short and cationic sequences with a high affinity for membranes. Similarities between CPPs and AMPs prompted us to question if these two classes of peptides really belong to unrelated families. In this Review, a critical comparison of the mechanisms that underlie cellular uptake is undertaken. A reflection and a new perspective about CPPs and AMPs are presented.     

Molecular details on the intermediate states of melittin action on a cell membrane

Antimicrobial peptides (AMPs) provide a promising solution to the serious threat of multidrug-resistant bacteria or superbugs to public healthcare, due to their unique disruption to bacterial membrane such as perforation. Unfortunately, the underlying action mechanism of AMPs, especially the possible transition between the membrane binding and perforation states of peptides (i.e., the classical two-state model), is still largely unknown. Herein, by combining experimental techniques with pertinent membrane models and molecular dynamic (MD) simulations, new insights into the intermediate states of the AMP melittin-membrane interaction process are obtained. Specifically, it is demonstrated that, after the initial binding, the accumulated melittin on the bilayer triggers vigorous fluctuation of the membrane and even extracts some lipid molecules exclusively from the deformed outer leaflet of the bilayer. Such a distinctive mass removal manner and the resultant local asymmetry in lipid number between the two leaflets change the mechanical status of the membrane and in turn reduce the free energy barrier for the melittin insertion. Finally, the formation of the transmembrane pores is facilitated significantly. These findings provide new insights into the complicated antimicrobial mechanisms of AMPs.     

Bactericidal activity of amphipathic cationic antimicrobial peptides involves altering the membrane fluidity when interacting with the phospholipid bilayer

BackgroundAmphipathic cationic antimicrobial peptides (AMPs) TC19 and TC84, derived from the major AMPs of human blood platelets, thrombocidins, and Bactericidal Peptide 2 (BP2), a synthetic designer peptide showed to perturb the membrane of Bacillus subtilis. We aimed to determine the means by which the three AMPs cause membrane perturbation in vivo using B. subtilis and to evaluate whether the membrane alterations are dependent on the phospholipid composition of the membrane.MethodsPhysiological analysis was employed using Alexa Fluor 488 labelled TC84, various fluorescence dyes, fluorescent microscopy techniques and structured illumination microscopy.ResultsTC19, TC84 and BP2 created extensive fluidity domains in the membrane that are permeable, thus facilitating the entering of the peptides and the leakage of the cytosol. The direct interaction of the peptides with the bilayer create the fluid domains. The changes caused in the packing of the phospholipids lead to the delocalization of membrane bound proteins, thus contributing to the cell's destruction. The changes made to the membrane appeared to be not dependent on the composition of the phospholipid bilayer.ConclusionsThe distortion caused to the fluidity of the membrane by the AMPs is sufficient to facilitate the entering of the peptides and leakage of the cytosol.General significanceHere we show in vivo that cationic AMPs cause “membrane leaks” at the site of membrane insertion by altering the organization and fluidity of the membrane. Our findings thus contribute to the understanding of the membrane perturbation characteristic of cationic AMPs.     

A genome-wide analysis of antimicrobial effector genes and their transcription patterns in Manduca sexta

Antimicrobial proteins/peptides (AMPs) are effectors of innate immune systems against pathogen infection in multicellular organisms. Over half of the AMPs reported so far come from insects, and these effectors act in concert to suppress or kill bacteria, fungi, viruses, and parasites. In this work, we have identified 86 AMP genes in the Manduca sexta genome, most of which seem likely to be functional. They encode 15 cecropins, 6 moricins, 6 defensins, 3 gallerimycins, 4 X-tox splicing variants, 14 diapausins, 15 whey acidic protein homologs, 11 attacins, 1 gloverin, 4 lebocins, 6 lysozyme-related proteins, and 4 transferrins. Some of these genes (e.g. attacins, cecropins) constitute large clusters, likely arising after rounds of gene duplication. We compared the amino acid sequences of M. sexta AMPs with their homologs in other insects to reveal conserved structural features and phylogenetic relationships. Expression data showed that many of them are synthesized in fat body and midgut during the larval-pupal molt. Certain genes contain one or more predicted κB binding sites and other regulatory elements in their promoter regions, which may account for the dramatic mRNA level increases in fat body and hemocytes after an immune challenge. Consistent with these strong mRNA increases, many AMPs become highly abundant in the larval plasma at 24 h after the challenge, as demonstrated in our previous peptidomic study. Taken together, these data suggest the existence of a large repertoire of AMPs in M. sexta, whose expression is up-regulated via immune signaling pathways to fight off invading pathogens in a coordinated manner.     

The cooperative behaviour of antimicrobial peptides in model membranes

A systematic analysis of the hypothesis of the antimicrobial peptides' (AMPs) cooperative action is performed by means of full atomistic molecular dynamics simulations accompanied by circular dichroism experiments. Several AMPs from the aurein family (2.5,2.6, 3.1), have a similar sequence in the first ten amino acids, are investigated in different environments including aqueous solution, trifluoroethanol (TFE), palmitoyloleoylphosphatidylethanolamine (POPE), and palmitoyloleoylphosphatidylglycerol (POPG) lipid bilayers. It is found that the cooperative effect is stronger in aqueous solution and weaker in TFE. Moreover, in the presence of membranes, the cooperative effect plays an important role in the peptide/lipid bilayer interaction. The action of AMPs is a competition of the hydrophobic interactions between the side chains of the peptides and the hydrophobic region of lipid molecules, as well as the intra peptide interaction. The aureins 2.5-COOH and 2.6-COOH form a hydrophobic aggregate to minimize the interaction between the hydrophobic group and the water. Once that the peptides reach the water/lipid interface the hydrophobic aggregate becomes smaller and the peptides start to penetrate into the membrane. In contrast, aurein 3.1-COOH forms only a transient aggregate which disintegrates once the peptides reached the membrane, and it shows no cooperativity in membrane penetration.     

AMPer: a database and an automated discovery tool for antimicrobial peptides

MOTIVATION: Increasing antibiotics resistance in human pathogens represents a pressing public health issue worldwide for which novel antibiotic therapies based on antimicrobial peptides (AMPs) may offer one possible solution. In the current study, we utilized publicly available data on AMPs to construct hidden Markov models (HMMs) that enable recognition of individual classes of antimicrobials peptides (such as defensins, cathelicidins, cecropins, etc.) with up to 99% accuracy and can be used for discovering novel AMP candidates. RESULTS: HMM models for both mature peptides and propeptides were constructed. A total of 146 models for mature peptides and 40 for propeptides have been developed for individual AMP classes. These were created by clustering and analyzing AMP sequences available in the public sources and by consequent iterative scanning of the Swiss-Prot database for previously unknown gene-coded AMPs. As a result, an additional 229 additional AMPs have been identified from Swiss-Prot, and all but 34 could be associated with known antimicrobial activities according to the literature. The final set of 1045 mature peptides and 253 propeptides have been organized into the open-source AMPer database. AVAILABILITY: The developed HMM-based tools and AMP sequences can be accessed through the AMPer resource at http://www.cnbi2.com/cgi-bin/amp.pl     

Effect of phosphatidylcholine bilayer thickness and molecular order on the binding of the antimicrobial peptide maculatin 1.1

Antimicrobial peptides (AMPs) interact directly with bacterial membrane lipids. Thus, changes in the lipid composition of bacterial membranes can have profound effects on the activity of AMPs. In order to understand the effect of bilayer thickness and molecular order on the activity of AMPs, the interaction of maculatin 1.1 (Mac1.1) with phosphatidylcholine (PC) model membranes composed of different monounsaturated acyl chain lengths between 14 and 22 carbons was characterised by dual polarisation interferometry (DPI) and 31P and 1H solid-state NMR techniques. The thickness and bilayer order of each PC bilayer showed a linear dependence on the acyl chain length. The binding of Mac1.1 exhibited a biphasic dependency between the amount of bound Mac1.1 and bilayer thickness, whereby the mass of bound peptide increased from C14 to C16 and then decreased from C16 to C22. Significant perturbation of 31P chemical shift anisotropy (CSA) values was only observed for DOPC (C18) and DEPC (C22), respectively. In the case of DEPC, the greater range in CSA indicated different headgroup conformations or environments in the presence of Mac1.1. Overall, the results indicated that there is a significant change in the bilayer order upon binding of Mac1.1 and this change occurred in a co-operative manner at higher concentrations of Mac1.1 with increasing bilayer thickness and order. Overall, an optimum bilayer thickness and lipid order may be required for effective membrane perturbation by Mac1.1 and increasing the bilayer thickness and order may counteract the activity of Mac1.1 and play a role in antimicrobial resistance to AMPs.     

Interaction of cationic antimicrobial peptides with Mycoplasma pulmonis

We investigated the mode of action underlying the anti-mycoplasma activity of cationic antimicrobial peptides (AMPs) using four known AMPs and Mycoplasma pulmonis as a model mycoplasma. Scanning electron microscopy revealed that the integrity of the M. pulmonis membrane was significantly damaged within 30 min of AMPs exposure, which was confirmed by measuring the uptake of propidium iodine into the mycoplasma cells. The anti-mycoplasma activity of AMPs was found to depend on the binding affinity for phosphatidylcholine, which was incorporated into the mycoplasma membrane from the growth medium and preferentially distributed in the outer leaflet of the lipid bilayer.     

²H solid-state nuclear magnetic resonance investigation of whole Escherichia coli interacting with antimicrobial peptide MSI-78

A key aspect of the activity of antimicrobial peptides (AMPs) is their interaction with membranes. Efforts to elucidate their detailed mechanisms have focused on applying biophysical methods, including nuclear magnetic resonance (NMR), to AMPs in model lipid systems. However, these highly simplified systems fail to capture many of the features of the much more complex cell envelopes with which AMPs interact in vivo. To address this issue, we have designed a procedure to incorporate high levels of (2)H NMR labels specifically into the cell membrane of Escherichia coli and used this approach to study the interactions between the AMP MSI-78 and the membranes of intact bacteria. The (2)H NMR spectra of these membrane-deuterated bacteria can be reproduced in the absence and presence of MSI-78. Because the (2)H NMR data provide a quantitative measure of lipid disorder, they directly report on the lipid bilayer disruption central to the function of AMPs, in the context of intact bacteria. Addition of MSI-78 to the bacteria leads to decreases in the order of the lipid acyl chains. The molar peptide:lipid ratios required to observe the effects of MSI-78 on acyl chain order are approximately 30 times greater than the ratios needed to observe effects in model lipid systems and approximately 100 times less than the ratios required to observe inhibition of cell growth in biological assays. The observations thus suggest that MSI-78 disrupts the bilayer even at sublethal AMP levels and that a large fraction of the peptide does not actually reach the inner membrane.     

Plant antimicrobial peptides

Plant antimicrobial peptides (AMPs) are a component of barrier defense system of plants. They have been isolated from roots, seeds, flowers, stems, and leaves of a wide variety of species and have activities towards phytopathogens, as well as against bacteria pathogenic to humans. Thus, plant AMPs are considered as promising antibiotic compounds with important biotechnological applications. Plant AMPs are grouped into several families and share general features such as positive charge, the presence of disulfide bonds (which stabilize the structure), and the mechanism of action targeting outer membrane structures.