Array-MAPH: a methodology for the detection of locus copy-number changes in complex genomes

High-throughput genome-wide screening methods to detect subtle genomic imbalances are extremely important for diagnostic genetics and genomics. Here, we provide a detailed protocol for a microarray-based technique, applying the principle of multiplex amplifiable probe hybridization (MAPH). Methodology and software have been developed for designing unique PCR-amplifiable sequences (400-600 bp) covering any genomic region of interest. These sequences are amplified, cloned and spotted onto arrays (targets). A mixture of the same sequences (probes) is hybridized to genomic DNA immobilized on a membrane. Bound probes are recovered and quantitatively amplified by PCR, labeled and hybridized to the array. The procedure can be completed in 4-5 working days, excluding microarray preparation. Unlike array-comparative genomic hybridization (array-CGH), test DNA of specifically reduced complexity is hybridized to an array of identical small amplifiable target sequences, resulting in increased hybridization specificity and higher potential for increasing resolution. Array-MAPH can be used for detection of small-scale copy-number changes in complex genomes, leading to genotype-phenotype correlations and the discovery of new genes.     

Enrichment of meiotic recombination hotspot sequences by avidin capture technology

About 40% of the hotspots for meiotic recombination contain the degenerate consensus sequence 5′-CCNCCNTNNCCNC-3′. Here we present a novel protocol for enriching hotspot sequences from digested genomic DNA by using biotinylated oligonucleotides and streptavidin-coated magnetic beads. The captured hotspots can be released by simple digestion with restriction enzymes for subsequent characterization by second generation sequencing or PCR. The capture protocol specifically enriches hotspot sequences, judged by using fluorophore-conjugated synthetic oligonucleotides and synthetic double-stranded oligonucleotides in combination with PCR. The capture protocol enriches single-stranded DNA, denatured double-stranded DNA, and large fragments (> 3000 bp) of digested plasmid DNA with good efficacy. No false positive and false negatives were detected when enriching digested DNA from human cell cultures and primary human cells. The protocol can probably be adapted to enriching sequences other than the hotspot sequence by altering the sequence in the capture oligonucleotide. We intend to apply this protocol in studies assessing effects of micronutrient status on meiotic recombination events in human sperm.     

Multiplex random priming of internal restriction fragments for DNA sequencing.

An approach for DNA sequencing is described that circumvents the need for synthetic oligonucleotide primers, which seriously restrict the progress of DNA sequencing in the commonly used protocol. The method is based on the use of short restriction fragments as primers randomly distributed along single-stranded templates. Premapping of target DNA is eliminated and subcloning manipulation is minimized. This method has been used successfully for sequencing genes in the range of 2 kb, for which about 10 restriction fragment primers per kilobase were sufficient to generate a continuous overlapping sequence in alignment. The approach has also been readily applied for an automated sequencing system with the fluorescent chain-terminating dideoxynucleotides, thus implying its potential for sequencing large genomic DNAs.     

DNA microarrays with stem-loop DNA probes: preparation and applications

We have developed DNA microarrays containing stem-loop DNA probes with short single-stranded overhangs immobilized on a Packard HydroGel chip, a 3-dimensional porous gel substrate. Microarrays were fabricated by immobilizing self-complementary single-stranded oligonucleotides, which adopt a partially duplex structure upon denaturing and re-annealing. Hybridization of single-stranded DNA targets to such arrays is enhanced by contiguous stacking interactions with stem-loop probes and is highly sequence specific. Subsequent enzymatic ligation of the targets to the probes followed by stringent washing further enhances the mismatched base discrimination. We demonstrate here that these microarrays provide excellent specificity with signal-to-background ratios of from 10- to 300-fold. In a comparative study, we demonstrated that HydroGel arrays display 10-30 times higher hybridization signals than some solid surface DNA microarrays. Using Sanger sequencing reactions, we have also developed a method for preparing nested 3'-deletion sets from a target and evaluated the use of stem-loop DNA arrays for detecting p53 mutations in the deletion set. The stem-loop DNA array format is simple, robust and flexible in design, thus it is potentially useful in various DNA diagnostic tests.     

Gold nanoparticle-based detection of genomic DNA targets on microarrays using a novel optical detection system

The development of a nanoparticle-based detection methodology for sensitive and specific DNA-based diagnostic applications is described. The technology utilizes gold nanoparticles derivatized with thiol modified oligonucleotides that are designed to bind complementary DNA targets. A glass surface with arrays of immobilized oligonucleotide capture sequences is used to capture DNA targets, which are then detected via hybridization to the gold nanoparticle probes. Amplification with silver allows for detection and quantitation by measuring evanescent wave induced light scatter with low-cost optical detection systems. Compared to Cy3-based fluorescence, silver amplified gold nanoparticle probes provide for a approximately 1000-fold increase in sensitivity. Furthermore, direct detection of non-amplified genomic DNA from infectious agents is afforded through increased specificity and even identification of single nucleotide polymorphisms (SNP) in human genomic DNA appears feasible.     

Peptide nucleic acid (PNA) facilitates multistranded hybrid formation between linear double-stranded DNA targets and RecA protein-coated complementary single-stranded DNA probes

RecA protein-coated single-stranded DNA probes, known as RecA nucleoprotein filaments, bind specifically to homologous DNA sequences within double-stranded DNA targets, forming multistranded probe-target DNA hybrids. This DNA hybridization reaction can be used for sequence-specific gene capture, gene modification, and gene regulation. Thus, factors that enhance the efficiency of the hybridization reaction are of significant practical importance. We show here that the hybridization of a peptide nucleic acid (PNA) within or adjacent to the probe-target homology region significantly enhances the yield of hybrid DNA formed in the reaction between linear double-stranded DNA targets and RecA protein-coated complementary single-stranded (css)DNA probes. The possible mechanisms and the advantages of using RecA nucleoprotein filaments in combination with PNA for genomic DNA cloning and mutagenesis are presented.     

DNA microarrays with stem–loop DNA probes: preparation and applications

We have developed DNA microarrays containing stem–loop DNA probes with short single-stranded overhangs immobilized on a Packard HydroGel chip, a 3-dimensional porous gel substrate. Microarrays were fabricated by immobilizing self-complementary single-stranded oligonucleotides, which adopt a partially duplex structure upon denaturing and re-annealing. Hybridization of single-stranded DNA targets to such arrays is enhanced by contiguous stacking interactions with stem–loop probes and is highly sequence specific. Subsequent enzymatic ligation of the targets to the probes followed by stringent washing further enhances the mismatched base discrimination. We demonstrate here that these microarrays provide excellent specificity with signal-to-background ratios of from 10- to 300-fold. In a comparative study, we demonstrated that HydroGel arrays display 10–30 times higher hybridization signals than some solid surface DNA microarrays. Using Sanger sequencing reactions, we have also developed a method for preparing nested 3′-deletion sets from a target and evaluated the use of stem–loop DNA arrays for detecting p53 mutations in the deletion set. The stem–loop DNA array format is simple, robust and flexible in design, thus it is potentially useful in various DNA diagnostic tests.     

Effects of target length on the hybridization efficiency and specificity of rRNA-based oligonucleotide microarrays

The effect of target size on microarray hybridization efficiencies and specificity was investigated using a set of 166 oligonucleotide probes targeting the 16S rRNA gene of Escherichia coli. The targets included unfragmented native rRNA, fragmented rRNA ( approximately 20 to 100 bp), PCR amplicons (93 to 1,480 bp), and three synthetic single-stranded DNA oligonucleotides (45 to 56 bp). Fluorescence intensities of probes hybridized with targets were categorized into classes I (81 to 100% relative to the control probe), II (61 to 80%), III (41 to 60%), IV (21 to 40%), V (6 to 20%), and VI (0 to 5%). Good hybridization efficiency was defined for those probes conferring intensities in classes I to IV; those in classes V and VI were regarded as weak and false-negative signals, respectively. Using unfragmented native rRNA, 13.9% of the probes had fluorescence intensities in classes I to IV, whereas the majority (57.8%) exhibited false-negative signals. Similar trends were observed for the 1,480-bp PCR amplicon (6.6% of the probes were in classes I to IV). In contrast, after hybridization of fragmented rRNA, the percentage of probes in classes I to IV rose to 83.1%. Likewise, when DNA target sizes were reduced from 1,480 bp to 45 bp, this percentage increased approximately 14-fold. Overall, microarray hybridization efficiencies and specificity were improved with fragmented rRNA (20 to 100 bp), short PCR amplicons (<150 bp), and synthetic targets (45 to 56 bp). Such an understanding is important to the application of DNA microarray technology in microbial community studies.     

Specific detection of DNA and RNA targets using a novel isothermal nucleic acid amplification assay based on the formation of a three-way junction structure

The formation of DNA three-way junction (3WJ) structures has been utilised to develop a novel isothermal nucleic acid amplification assay (SMART) for the detection of specific DNA or RNA targets. The assay consists of two oligonucleotide probes that hybridise to a specific target sequence and, only then, to each other forming a 3WJ structure. One probe (template for the RNA signal) contains a non-functional single-stranded T7 RNA polymerase promoter sequence. This promoter sequence is made double-stranded (hence functional) by DNA polymerase, allowing T7 RNA polymerase to generate a target-dependent RNA signal which is measured by an enzyme-linked oligosorbent assay (ELOSA). The sequence of the RNA signal is always the same, regardless of the original target sequence. The SMART assay was successfully tested in model systems with several single-stranded synthetic targets, both DNA and RNA. The assay could also detect specific target sequences in both genomic DNA and total RNA from Escherichia coli. It was also possible to generate signal from E.coli samples without prior extraction of nucleic acid, showing that for some targets, sample purification may not be required. The assay is simple to perform and easily adaptable to different targets.     

Optimal conditions for hybridization with oligonucleotides: a study with myc-oncogene DNA probes

We present a study on the refinement of filter-hybridization conditions for a series of synthetic oligonucleotides in the range from 17 to 50 base residues in length. Experimental conditions for hybridization and the subsequent washing steps of the filter were optimized for different lengths of the synthetic oligonucleotides by varying the formamide concentration and washing conditions (temperature and monovalent cation concentration). Target DNA was immobilized to the nitrocellulose filter with the slot blot technique. The sequences of the synthetic oligonucleotides are derived from the third exon of the human oncogene c-myc and the corresponding viral gene v-myc and the G + C content was between 43 and 47%. Optimal conditions for hybridization with a 82% homologous 30-mer and 100% homologous 17-, 20-, 25-, 30-, and 50-mers were found to be a concentration of formamide of 15, 15, 30, 30, 40, and 50%, respectively. Optimal conditions for washing were 0.5X standard sodium citrate (SSC) at 42 degrees C for 2 X 15 min. The melting temperature for these optimal hybridization and washing conditions was calculated to be up to 11 degrees C below the hybridization temperature actually used. This confirms that the duplexes are more stable than expected. The melting points for 17-, 20-, and 30-mers were measured in the presence of 5X SSC and found to be 43, 58, and 60 degrees C, respectively. Competition between double- and single-stranded DNA probes to the target DNA was investigated. The single-stranded DNA probes were about 30- to 40-fold more sensitive than the double-stranded DNA probes.     

Lateral-flow and up-converting phosphor reporters to detect single-stranded nucleic acids in a sandwich-hybridization assay

Up-converting Phosphor Technology (UPT) particles were used as reporters in lateral-flow (LF) assays to detect single-stranded nucleic acids. The 400-nm phosphor particles exhibit strong visible luminescence upon excitation with infrared (IR) light resulting in the total absence of background autofluorescence from other biological compounds. A sandwich-type hybridization assay was applied using two sequence-specific oligonucleotides. One of the oligonucleotides probes was covalently bound to the UPT particle (reporter) for direct labeling and detection, whereas the second oligonucleotide probe contained biotin for capture by avidin during LF. The whole procedure of hybridization, UPT-LF detection, and analysis required a minimum time of 20 min. Moreover, aiming at minimal equipment demands, the hybridization conditions were chosen such that the entire assay could be performed at ambient temperature. During lateral flow, only targets hybridized to both capture and detection oligonucleotide were trapped and detected at an avidin capture line on the LF strip. Analysis (IR scanning) of the strips was performed in an adapted microtiter plate reader provided with a 980-nm IR laser for excitation of the phosphor particles (a portable reader was also available). Visible luminescence was measured and presented as relative fluorescence units (RFU) allowing convenient quantitation of the phosphor signal. With the assay described here as little as 0.1 fmol of a specific single-stranded nucleic acid target was detected in a background of 10 microg fish sperm DNA.     

Detection of proteins using a colorimetric bio-barcode assay

The colorimetric bio-barcode assay is a red-to-blue color change-based protein detection method with ultrahigh sensitivity. This assay is based on both the bio-barcode amplification method that allows for detecting miniscule amount of targets with attomolar sensitivity and gold nanoparticle-based colorimetric DNA detection method that allows for a simple and straightforward detection of biomolecules of interest (here we detect interleukin-2, an important biomarker (cytokine) for many immunodeficiency-related diseases and cancers). The protocol is composed of the following steps: (i) conjugation of target capture molecules and barcode DNA strands onto silica microparticles, (ii) target capture with probes, (iii) separation and release of barcode DNA strands from the separated probes, (iv) detection of released barcode DNA using DNA-modified gold nanoparticle probes and (v) red-to-blue color change analysis with a graphic software. Actual target detection and quantification steps with premade probes take approximately 3 h (whole protocol including probe preparations takes approximately 3 days).     

Influence of Dangling Ends and Surface-Proximal Tails of Targets on Probe-Target Duplex Formation in 16S rRNA Gene-Based Diagnostic Arrays

Dangling ends and surface-proximal tails of gene targets influence probe-target duplex formation and affect the signal intensity of probes on diagnostic microarrays. This phenomenon was evaluated using an oligonucleotide microarray containing 18-mer probes corresponding to the 16S rRNA genes of 10 waterborne pathogens and a number of synthetic and PCR-amplified gene targets. Signal intensities for Klenow/random primer-labeled 16S rRNA gene targets were dissimilar from those for 45-mer synthetic targets for nearly 73% of the probes tested. Klenow/random primer-labeled targets resulted in an interaction with a complex mixture of 16S rRNA genes (used as the background) 3.7 times higher than the interaction of 45-mer targets with the same mixture. A 7-base-long dangling end sequence with perfect homology to another single-stranded background DNA sequence was sufficient to produce a cross-hybridization signal that was as strong as the signal obtained by the probe-target duplex itself. Gibbs free energy between the target and a well-defined background was found to be a better indicator of hybridization signal intensity than the sequence or length of the dangling end alone. The dangling end (Gibbs free energy of −7.6 kcal/mol) was found to be significantly more prone to target-background interaction than the surface-proximal tail (Gibbs free energy of −64.5 kcal/mol). This study underlines the need for careful target preparation and evaluation of signal intensities for diagnostic arrays using 16S rRNA and other gene targets due to the potential for target interaction with a complex background.     

Correlation between microarray DNA hybridization efficiency and the position of short capture probe on the target nucleic acid

The hybridization behavior of small oligonucleotides arrayed on glass slides is currently unpredictable. In order to examine the hybridization efficiency of capture probes along target nucleic acid, 20-mer oligonucleotide probes were designed to hybridize at different distances from the 5' end of two overlapping 402- and 432-bp ermB products amplified from the target DNA. These probes were immobilized via their 5' end onto glass slides and hybridized with the two labeled products. Evaluation of the hybridization signal for each probe revealed an inverse correlation with the length of the 5' overhanging end of the captured strand and the hybridization signal intensity. Further experiments demonstrated that this phenomenon is dependent on the reassociation kinetics of the free overhanging tail of the captured DNA strand with its complementary strand. This study delineates key predictable parameters that govern the hybridization efficiency of short capture probes arrayed on glass slides. This should be most useful for designing arrays for detection of PCR products and nucleotide polymorphisms.     

Isolation of the human glyceraldehyde-3-phosphate dehydrogenase gene by hybridization with synthetic oligonucleotides

By screening a human genomic library from human lymphocyte DNA cloned in EMBL 3 vector with synthetic oligonucleotides homologous to the human GAPD cDNA 3'-non-coding region as probes, a unique lambda recombinant clone (EMBL-G5) was isolated at the Tm value. Preliminary restriction analysis and sequence data proved that this recombinant clone is the human structural gene for the glyceraldehyde- 3-phosphate dehydrogenase.     

Influence of dangling ends and surface-proximal tails of targets on probe-target duplex formation in 16S rRNA gene-based diagnostic arrays

Dangling ends and surface-proximal tails of gene targets influence probe-target duplex formation and affect the signal intensity of probes on diagnostic microarrays. This phenomenon was evaluated using an oligonucleotide microarray containing 18-mer probes corresponding to the 16S rRNA genes of 10 waterborne pathogens and a number of synthetic and PCR-amplified gene targets. Signal intensities for Klenow/random primer-labeled 16S rRNA gene targets were dissimilar from those for 45-mer synthetic targets for nearly 73% of the probes tested. Klenow/random primer-labeled targets resulted in an interaction with a complex mixture of 16S rRNA genes (used as the background) 3.7 times higher than the interaction of 45-mer targets with the same mixture. A 7-base-long dangling end sequence with perfect homology to another single-stranded background DNA sequence was sufficient to produce a cross-hybridization signal that was as strong as the signal obtained by the probe-target duplex itself. Gibbs free energy between the target and a well-defined background was found to be a better indicator of hybridization signal intensity than the sequence or length of the dangling end alone. The dangling end (Gibbs free energy of -7.6 kcal/mol) was found to be significantly more prone to target-background interaction than the surface-proximal tail (Gibbs free energy of -64.5 kcal/mol). This study underlines the need for careful target preparation and evaluation of signal intensities for diagnostic arrays using 16S rRNA and other gene targets due to the potential for target interaction with a complex background.