Direct fermentation of starch to L-(+)-lactic acid using Lactobacillus amylophilus

Summary Fermentation of L-(+)-lactic acid from soluble starch by Lactobacillus amylophilus was studied. The bacterium produced about 30 g of L-(+)-lactic acid from 50 g of soluble starch when the pH of the culture was ranging from pH 5 to pH 6.8 at 28°C. 53.4 g of L-(+)-lactic acid was produced when 100 g of starch was added in the medium. The fermentation procedures will reduce the cost of complete hydrolysis of starch to glucose prior to fermentation.     

Lactic acid production from corn stover using mixed cultures of Lactobacillus rhamnosus and Lactobacillus brevis

Mixed cultures of Lactobacillus rhamnosus and Lactobacillus brevis was studied for improving utilization of both cellulose- and hemicellulose-derived sugars from corn stover for lactic acid production. During simultaneous saccharification and fermentation (SSF) of NaOH-treated corn stover by the mixed cultures, a lactic acid yield of 0.70 g/g was obtained, which was about 18.6% and 29.6% higher than that by single cultures of L. rhamnosus and L. brevis, respectively. Our results indicated that lactic acid yield from NaOH-pretreated corn stover by mixed cultures of L. rhamnosus and L. brevis was comparable to that from pure sugar mixtures (0.73 g/g of glucose/xylose mixture at 3:1 w/w).     

Lactic acid production from enzyme-thinned corn starch usingLactobacillus amylovorus

Summary An alternative process for industrial lactic acid production was deveooped using a starch degrading lactic acid producing organism,Lactobacillus amylovorus B-4542. In this process, saccharification takes place during the fermentation, eliminating the need for complete hydrolysis of the starch to glucose prior to fermentation. The cost savings of this alternative are substantial since it eliminates the energy input, separate reactor tank, time, and enzyme associated with the typical pre-fermentation saccharification step. The only pre-treatment was gelatinization and enzyme-thinning of the starch to overcome viscosity problems associated with high starch concentrations and to make the starch more rapidly degradable. This fermentation process was optimized for temperature, substrate level, nitrogen source and level, mineral level, B-vitamins, volatile fatty acids, pH, and buffer source. The rate of the reaction and the final level of lactic acid obtained in the optimized liquefied starch process was similar to that obtained withL. delbrueckii B-445 using glucose as the substrate.     

Lactic acid production from whey permeate by immobilized Lactobacillus casei

Two matrices have been assessed for their ability to immobilize Lactobacillus casei cells for lactic acid fermentation in whey permeate medium. Agar at 2% concentration was found to be a better gel than polyacrylamide in its effectiveness to entrap the bacterial cells to carry out batch fermentation up to three repeat runs. Of the various physiological parameters studied, temperature and pH were observed to have no significant influence on the fermentation ability of the immobilized organism. A temperature range of 40–50°C and a pH range of 4.5–6.0 rather than specific values, were found to be optimum when fermentation was carried out under stationary conditions. In batch fermentation ～90% conversion of the substrate (lactose) was achieved in 48 h using immobilized cell gel cubes of 4 × 2 × 2 mm size, containing 400 mg dry bacterial cells per flask and 4.5% w/v (initial) whey lactose content as substrate. However, further increase in substrate levels tested (>4.5% w/v) did not improve the process efficiency. Supplementation of Mg²⁺ (1 mM) and agricultural by-products (mustard oil cake, 6%) in the whey permeate medium further improved the acid production ability of the immobilized cells under study.     

Glucose metabolic flux distribution of Lactobacillus amylophilus during lactic acid production using kitchen waste saccharified solution

The ¹³C isotope tracer method was used to investigate the glucose metabolic flux distribution and regulation in Lactobacillus amylophilus to improve lactic acid production using kitchen waste saccharified solution (KWSS). The results demonstrate that L. amylophilus is a homofermentative bacterium. In synthetic medium, 60.6% of the glucose entered the Embden–Meyerhof–Parnas (EMP) to produce lactic acid, whereas 36.4% of the glucose entered the pentose phosphate metabolic pathway (HMP). After solid–liquid separation of the KWSS, the addition of Fe³⁺ during fermentation enhanced the NADPH production efficiency and increased the NADH content. The flux to the EMP was also effectively increased. Compared with the control (60.6% flux to EMP without Fe³⁺ addition), the flux to the EMP with the addition of Fe³⁺ (74.3%) increased by 23.8%. In the subsequent pyruvate metabolism, Fe³⁺ also increased lactate dehydrogenase activity, and inhibited alcohol dehydrogenase, pyruvate dehydrogenase and pyruvate carboxylase, thereby increasing the lactic acid production to 9.03 g l⁻¹, an increase of 8% compared with the control. All other organic acid by-products were lower than in the control. However, the addition of Zn²⁺ showed an opposite effect, decreasing the lactic acid production. In conclusion it is feasible and effective means using GC-MS, isotope experiment and MATLAB software to integrate research the metabolic flux distribution of lactic acid bacteria, and the results provide the theoretical foundation for similar metabolic flux distribution.     

Lactic acid production by Lactobacillus delbreuckii in a hollow fiber fermenter

Summary Lactic acid was produced by viable Lactobacillus delbreuckii NRRL-B445 in a hollow fiber fermenter. Final cell densities in the fluid surrounding the fibers in the fermenter were apparently as high as 480 gms DW/L, and volumetric productivities reached 100 gms/L-hr lactic acid. The observed cell yields were appreciably lower than batch cell yields.     

Lactic acid production from sugar-cane juice by a newly isolated Lactobacillus sp.

A newly isolated sucrose-tolerant, lactic acid bacterium, Lactobacillus sp. strain FCP2, was grown on sugar-cane juice (125 g sucrose l⁻¹, 8 g glucose l⁻¹ and 6 g fructose l⁻¹) for 5 days and produced 104 g lactic acid l⁻¹ with 90% yield. A higher yield (96%) and productivity (2.8 g l⁻¹ h⁻¹) were obtained when strain FCP2 was cultured on 3% w/v (25 g sucrose l⁻¹, 2 g glucose l⁻¹ and 1 g fructose l⁻¹) sugar-cane juice for 10 h. Various cheap nitrogen sources such as silk worm larvae, beer yeast autolysate and shrimp wastes were also used as a substitute to yeast extract.     

Lactic acid production from molasses utilizing Lactobacillus delbrueckii and invertase together

Conclusion The prices of the process substrates such as glucose, sucrose and molasses (as $/ton) are 1500, 1600 and 24, respectively. For molasses plus invertase, the price increases to 46 $/ton. Thus compared with the other possible substrates, the lactic acid production procedure used in this study does not cause any appreciable increase in the pruduction cost due to the utilization of invertase, while enhancing the yield of product.     

Lactic acid production by Lactobacillus delbrueckii in a dual reactor system using packed bed biofilm reactor

Aims:  An integrated dual reactor system for continuous production of lactic acid by Lactobacillus delbrueckii using biofilms developed on reticulated polyurethane foam (PUF) is demonstrated.
Methods and Results:  Lactobacillus delbrueckii was immobilized on PUF, packed in a bioreactor and used in lactic acid fermentation. The rate of lactic acid production was significantly high with a volumetric productivity of 5 g l⁻¹ h⁻¹ over extended period of time. When coupled to a bioreactor, the system could be operated as dual reactor for over 1000 h continuously without augmentation of inoculum and no compromise on productivity.
Conclusions:  Polyurethane foams offer an excellent support for biofilm formation.
Significance and Impact of the Study:  The system was very robust and could be operated for prolonged period at a volumetric productivity of 4–6 g l⁻¹ h⁻¹.     

Lactic acid production from cellulosic waste by immobilized cells of Lactobacillus delbrueckii

Industrial waste corn cob residue (from xylose manufacturing) without pretreatment was hydrolyzed by cellulase and cellobiase. The cellulosic hydrolysate contained 52.4 g l⁻¹ of glucose and was used as carbon source for lactic acid fermentation by cells of Lactobacillus delbrueckii ZU-S2 immobilized in calcium alginate gel beads. The final concentration of lactic acid and the yield of lactic acid from glucose were 48.7 g l⁻¹ and 95.2%, respectively, which were comparative to the results of pure glucose fermentation. The immobilized cells were quite stable and reusable, and the average yield of lactic acid from glucose in the hydrolysate was 95.0% in 12 repeated batches of fermentation. The suitable dilution rate of continuous fermentation process was 0.13 h⁻¹, and the yield of lactic acid from glucose and the productivity were 92.4% and 5.746 g l⁻¹ h⁻¹, respectively. The production of lactic acid by simultaneous saccharification and fermentation (SSF) process was carried out in a coupling bioreactor, the final concentration of lactic acid was 55.6 g l⁻¹, the conversion efficiency of lactic acid from cellulose was 91.3% and the productivity was 0.927 g l⁻¹ h⁻¹. By using fed-batch technique in the SSF process, the final concentration of lactic acid and the productivity increased to 107.6 g l⁻¹ and 1.345 g l⁻¹ h⁻¹, respectively, while the dosage of cellulase per gram substrate decreased greatly. This research work should advance the bioconversion of renewable cellulosic resources and reduce environmental pollution.     

Direct conversion of starch to L(+) lactic acid by amylase producing Lactobacillus amylophilus GV6

Lactobacillus amylophilus strain GV6, isolated from corn starch processing industrial wastes, was amylolytic and produced 0.96?g L(+) lactic acid per gram of soluble starch. The optimum temperature and pH for growth and L(+) lactic acid production were 37?°C and 6.5, respectively. At low substrate concentrations, the lactic acid production on corn starch was almost similar to soluble starch. The strain is fermenting various naturally available starches directly to lactic acid. The total amylase activity of the strain is 0.59?U/ml/min. The strain produced 49 and 76.2?g/l L(+) lactic acid from 60?g/l corn starch and 90?g/l soluble starch, respectively. This is the highest L(+) lactic acid among the wild strains of L. amylophilus reported so far.     

Lactic acid production by loofah-immobilized Rhizopus oryzae through one-step fermentation process using starch substrate

Rhizopus oryzae PTCC 5263 capacity in synthesis of lactic acid (LA) from 10 g/l of soluble potato starch was determined using one-step fermentation process. Pellets were the favorable growing form of the free cells. The extent of the natural ability of the test fungus on biofilm formation on loofah sponge was examined by immobilizing R. oryzae (LIRO). The maximum LA concentration for the free cells and LIRO within 96 h was 3 and 4 g/l, respectively. In terms of specific starch utilization rate (\(q_{\text{s}}\)) and specific LA formation (\(q_{\text{p}}\)), LIRO performed more favorably compared to the free cells (\(q_{{{\text{s}}_{\text{F}} }} > q_{{{\text{s}}_{\text{LIRO}} }}\) and \(q_{{{\text{p}}_{\text{F}} }} < q_{{{\text{p}}_{\text{LIRO}} }}\)). Cell immobilization strategy was undertaken for the column reactor studies based on the statistically optimized levels of the inoculum size and temperature. Maximum production of the LA by the LIRO using an airlift reactor with net draft tube was 5 g/l obtainable within 48 h.

     

Lactic acid fermentation in a recycle batch reactor using immobilized Lactobacillus casei

Lactic acid production by recycle batch fermentation using immobilized cells of Lactobacillus casei subsp. rhamnosus was studied. The culture medium was composed of whey treated with an endoprotease, and supplemented with 2.5 g/L of yeast extract and 0.18 mM Mn(2+) ions. The fermentation set-up comprised of a column packed with polyethyleneimine-coated foam glass particles, Pora-bact A, and connected with recirculation to a stirred tank reactor vessel for pH control. The immobilization of L. casei was performed simply by circulating the culture medium inoculated with the organism over the beads. At this stage, a long lag period preceded the cell growth and lactic acid production. Subsequently, for recycle batch fermentations using the immobilized cells, the reducing sugar concentration of the medium was increased to 100 g/L by addition of glucose. The lactic acid production started immediately after onset of fermentation and the average reactor productivity during repeated cycles was about 4.3 to 4.6 g/L . h, with complete substrate utilization and more than 90% product yield. Sugar consumption and lactate yield were maintained at the same level with increase in medium volume up to at least 10 times that of the immobilized biocatalyst. The liberation of significant amounts of cells into the medium limited the number of fermentation cycles possible in a recycle batch mode. Use of lower yeast extract concentration reduced the amount of suspended biomass without significant change in productivity, thereby also increasing the number of fermentation cycles, and even maintained the D-lactate amount at low levels. The product was recovered from the clarified and decolorized broth by ion-exchange adsorption. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 55:841-853, 1997.     

Direct production of L+-lactic acid from starch and food wastes using Lactobacillus manihotivorans LMG18011

This study describes several essential factors for direct and effective lactic acid production from food wastes by Lactobacillus manihotivorans LMG18011, and optimum conditions for simultaneous saccharification and fermentation using soluble starch and food wastes as substrates. The productivity was found to be affected by three factors: (1) initial pH, which influenced amylase production for saccharification of starch, (2) culture pH control which influenced selective production of L(+)-lactic acid, and (3) manganese concentration in medium which improved in production rate and yield of lactic acid. The optimum initial pH was 5.0-5.5, and the fermentation pH for the direct and effective fermentation from starchy substrate was 5.0 based on the yield of L(+)-lactic acid. Under these conditions, 19.5 g L(+)-lactic acid was produced from 200 g food wastes by L. manihotivorans LMG18011. Furthermore, the addition of manganese stimulated the direct fermentation significantly, and enabled complete bioconversion within 100 h.     

Lactic acid production from agriculture residues

Various agriculture feedstock residues were evaluated for lactic acid production by simultaneous saccharification and fermentation (SSF) using Lactobacillus delbrueckii and Lactobacillus plantarum, without any additional nutrients. Lactic acid production was higher in alfalfa fiber and soya fiber compared to corncob (soft) and wheat straw. In Lactobacillus plantarum, the amount of lactic acid obtained from alfalfa fiber and soya fiber was 46 and 44 g/100 g fiber, respectively. However, in Lactobacillus delbrueckii, the lactic acid production in soya fiber was 44 g/100 g fiber and that of alfalfa was 32 g/100 g fiber. Small amounts of acetic acid were also produced from SSF of agricultural feedstocks residues. During SSF of alfalfa fiber, lactic acid production in both L. delbrueckii and L. plantarum was enhanced by adding pectinases and cellulases. Lactic acid production from alfalfa fiber did not change with increasing O₂ transfer rates in the fermentation medium, whereas acetic acid production in both Lactobacillus cultures increased with increasing O₂ transfer rates.     

DO-stat fed-batch production of 2-keto-d-gluconic acid from cassava using immobilized Pseudomonas aeruginosa

Bioconversion of cassava-derived glucose to 2-keto-d-gluconic acid (2-KDG) using resting cells of immobilized Pseudomonas aeruginosa IFO 3448 was investigated. The tuberous roots of cassava were selected as the feedstock as they are inexpensive and widely available, and possess high amounts of starch (approximately 70% (w/w) of dry mass). Immobilized bacteria was used in a fed-batch fermenter and recycled over a period of 2 weeks. Given that the formation of 2-KDG from glucose requires oxygen as a reagent, and that high glucose concentrations are detrimental to the production yield of 2-KDG by resting cells, a DO-stat control strategy was used, whereby the feed rate of cassava hydrolysate was regulated by coupling it with the control variable, dissolved oxygen. For 319 h of operation including three cycles of repeated fed batch, 72 g of 2-KDG was produced from hydrolysate derived from 110 g of dried cassava at a maximum production rate of 0.55 g/L/h and an average concentration of 35 g/L.     

Lactic acid production from sugarcane bagasse hydrolysates by Lactobacillus pentosus: Integrating xylose and glucose fermentation

Lactic acid, traditionally obtained through fermentation process, presents numerous applications in different industrial segments, including production of biodegradable polylactic acid (PLA). Development of low cost substrate fermentations could improve economic viability of lactic acid production, through the use of agricultural residues as lignocellulosic biomass. Studies regarding the use of sugarcane bagasse hydrolysates for lactic acid production by Lactobacillus spp. are reported. First, five strains of Lactobacillus spp. were investigated for one that had the ability to consume xylose efficiently. Subsequently, biomass fractionation was performed by dilute acid and alkaline pretreatments, and the hemicellulose hydrolysate (HH) fermentability by the selected strain was carried out in bioreactor. Maximum lactic acid concentration and productivity achieved in HH batch were 42.5 g/L and 1.02 g/L h, respectively. Hydrolyses of partially delignified cellulignin (PDCL) by two different enzymatic cocktails were compared. Finally, fermentation of HH and PDCL hydrolysate together was carried out in bioreactor in a hybrid process: saccharification and co-fermentation with an initial enzymatic hydrolysis. The high fermentability of these process herein developed was demonstrated by the total consumption of xylose and glucose by Lactobacillus pentosus, reaching at 65.0 g/L of lactic acid, 0.93 g/g of yield, and 1.01 g/L h of productivity. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2718, 2019     

Lactic acid production from lignocellulose-derived sugars using lactic acid bacteria: overview and limits

Lactic acid is an industrially important product with a large and rapidly expanding market due to its attractive and valuable multi-function properties. The economics of lactic acid production by fermentation is dependent on many factors, of which the cost of the raw materials is very significant. It is very expensive when sugars, e.g., glucose, sucrose, starch, etc., are used as the feedstock for lactic acid production. Therefore, lignocellulosic biomass is a promising feedstock for lactic acid production considering its great availability, sustainability, and low cost compared to refined sugars. Despite these advantages, the commercial use of lignocellulose for lactic acid production is still problematic. This review describes the "conventional" processes for producing lactic acid from lignocellulosic materials with lactic acid bacteria. These processes include: pretreatment of the biomass, enzyme hydrolysis to obtain fermentable sugars, fermentation technologies, and separation and purification of lactic acid. In addition, the difficulties associated with using this biomass for lactic acid production are especially introduced and several key properties that should be targeted for low-cost and advanced fermentation processes are pointed out. We also discuss the metabolism of lignocellulose-derived sugars by lactic acid bacteria.