Isolation and Structural Characterization of Lignin Polymer from Dendrocalamus sinicus

Dendrocalamus sinicus, which is the largest bamboo species in the world, has broad prospects in the fields of bioenergy and biorefinery application. In this study, dewaxed D. sinicus samples were sequentially treated with 80 % ethanol containing 0.025 M HCl, 80 % ethanol containing 0.5 % NaOH, and aqueous alkaline solutions (containing 2.0, 5.0, and 8.0 % NaOH, respectively) at 75 °C for 4 h, in which 9.63, 8.71, 21.83, 21.09, and 13.09 % of the original lignin were isolated, respectively. The lignin fractions obtained were comparatively characterized by chemical composition, molecular weights, and structural features by wet chemical and instrumental analysis methods. It was found that the bamboo lignin fractions isolated by ethanol had lower weight-average molecular weights (1,360–1,380 g?mol^?1) and contained much higher amounts of associated hemicelluloses, while the lignin fractions isolated by aqueous alkaline solutions had higher weight-average molecular weights (5,300–6,040 g?mol^?1) and contained lower amounts of associated hemicelluloses. Spectroscopy analyses indicated that the bamboo lignin was a typical grass lignin, consisting of p-hydroxyphenyl (H), guaiacyl (G), and syringyl (S) units. A small percentage of the lignin side-chain was found to be acetylated at the γ-carbon, predominantly at syringyl units. The major interunit linkages present in the bamboo lignin obtained were β-O-4′ aryl ether linkages, together with lower amounts of β-β′, β-5′, and β-1′ linkages.     

Fractionation and characterization of chlorophyll and lignin from de-juiced Italian ryegrass (Lolium multifolrum) and timothy grass (Phleum pratense)

In this study, de-juiced Italian ryegrass and timothy grass were successfully fractionated into one chlorophyll rich fraction, two lignin fractions, two hemicellulosic preparations, and one cellulosic fraction by sequential processes with 80% ethanol containing 0.2% NaOH, 2.5% H₂O₂–0.2% EDTA containing 1.5% NaOH, and 2.5% H₂O₂–0.2% TAED containing 1.0% NaOH at 75 °C for 3 h, respectively. The yields of chlorophyll rich fraction and total lignin fraction were found to be 6.1 and 11.0% from de-juiced Italian ryegrass, and 12.7 and 13.2% from de-juiced timothy grass. It should be noted that the two chlorophyll rich fractions contained noticeable amounts of contaminated hemicelluloses (17.1–18.8%) and lignin, whereas the four lignin fractions contained only small amounts of bound hemicelluloses (5.6–8.6%). Nitrobenzene oxidation and NMR spectra of the lignin fraction revealed that the presence of both guaiacyl and syringyl units, as well as p-hydroxyphenyl structures. Small amounts of esterified p-coumaric acids and mainly etherified ferulic acids were also identified in the lignin fractions. It was found that the lignin fractions obtained from the two different grasses had very similar structural composition. They are distinguished by rather low amounts of β-O-4 structures, resinol units (β-β), and of condensed units (β-5 and 5-5). This trait is even more pronounced in the production of phenolic compounds for chemical industry from grass.     

Comparative study of alkali-soluble hemicelluloses isolated from bamboo (Bambusa rigida)

The physicochemical properties and structural characteristics of seven alkali-soluble hemicellulosic preparations were determined. These were extracted from bamboo (Bambusa rigida) with 1 M NaOH, KOH, LiOH, NH₃·H₂O, (CH₃CH₂)₃N, Ca(OH)₂, Ba(OH)₂, respectively, at 50 °C for 3 h, were comparatively studied. Sugar analysis showed that these hemicelluloses contained d-xylose as the major constituent, along with d-glucose and l-arabinose in noticeable amounts. Uronic acids, principally 4-O-methyl-d-glucuronic acid, occurred in a small amount. Furthermore, based on the sugar analysis and FTIR and NMR spectroscopy, it can be concluded that the hemicelluloses consist of a backbone of β-(1→4)-linked d-xylopyranosyl units having branches of arabinose and 4-O-methyl-d-glucuronic acid. Nitrobenzene oxidation revealed that the hemicelluloses obtained are mostly free of bound lignins. Moreover, it is noteworthy that hemicelluloses isolated with the different alkaline solutions presented different chemical compositions and slightly dissimilar structural features, indicating that alkalinity played an important role in cleaving the chemical linkages between the hemicelluloses and the lignins.     

The use of natural abundance stable isotopic ratios to indicate the presence of oxygen-containing chemical linkages between cellulose and lignin in plant cell walls

Qualitative and quantitative understanding of the chemical linkages between the three major biochemical components (cellulose, hemicellulose and lignin) of plant cell walls is crucial to the understanding of cell wall structure. Although there is convincing evidence for chemical bonds between hemicellulose and lignin and the absence of chemical bonds between hemicellulose and cellulose, there is no conclusive evidence for the presence of covalent bonds between cellulose and lignin. This is caused by the lack of selectivity of current GC/MS-, NMR- and IR-based methods for lignin characterisation as none of these techniques directly targets the possible ester and ether linkages between lignin and cellulose. We modified the widely-accepted “standard” three-step extraction method for isolating cellulose from plants by changing the order of the steps for hemicellulose and lignin removal (solubilisation with concentrated NaOH and oxidation with acetic acid-containing NaClO₂, respectively) so that cellulose and lignin could be isolated with the possible chemical bonds between them intact. These linkages were then cleaved with NaClO₂ reagent in aqueous media of contrasting ¹⁸O/¹⁶O ratios. We produced cellulose with higher purity (a lower level of residual hemicellulose and no detectable lignin) than that produced by the “standard” method. Oxidative artefacts may potentially be introduced at the lignin removal stage; but testing showed this to be minimal.Cellulose samples isolated from processing plant-derived cellulose–lignin mixtures in media of contrasting ¹⁸O/¹⁶O ratios were compared to provide the first quantitative evidence for the presence of oxygen-containing ester and ether bonds between cellulose and lignin in Zea mays leaves. However, no conclusive evidence for the presence or lack of similar bonds in Araucaria cunninghamii wood was obtained.     

C nuclear magnetic resonance study of suberized potato cell wall

High-resolution, solid-state ¹³C nuclear magnetic resonance (NMR) spectra are reported for suberized cell wall from potatoes (Solanum tuberosum L.). Through experiments combining the techniques of cross polarization and magic-angle spinning, we verified that suberin, like cutin, is a polyester and demonstrated that it also has phenylpropanoid groups characteristic of lignin. Roughly 50% of the suberized material consists of cell-wall polymers; aromatics and other unsaturated linkages outnumber methylene groups 2:1. In conjunction with traditional direct-polarization NMR results, these experiments provide support for prior suggestions that suberin and cell-wall components are chemically bonded via aromatic groups.     

Laccase-Mediator Pretreatment of Wheat Straw Degrades Lignin and Improves Saccharification

Agricultural by-products such as wheat straw are attractive feedstocks for the production of second-generation bioethanol due to their high abundance. However, the presence of lignin in these lignocellulosic materials hinders the enzymatic hydrolysis of cellulose. The purposes of this work are to study the ability of a laccase-mediator system to remove lignin improving saccharification, as a pretreatment of wheat straw, and to analyze the chemical modifications produced in the remaining lignin moiety. Up to 48 % lignin removal from ground wheat straw was attained by pretreatment with Pycnoporus cinnabarinus laccase and 1-hydroxybenzotriazole (HBT) as mediator, followed by alkaline peroxide extraction. The lignin removal directly correlated with increases (～60 %) in glucose yields after enzymatic saccharification. The pretreatment using laccase alone (without mediator) removed up to 18 % of lignin from wheat straw. Substantial lignin removal (37 %) was also produced when the enzyme-mediator pretreatment was not combined with the alkaline peroxide extraction. Two-dimensional nuclear magnetic resonance (2D NMR) analysis of the whole pretreated wheat straw material swollen in dimethylsulfoxide-d ₆ revealed modifications of the lignin polymer, including the lower number of aliphatic side chains involved in main β-O-4′ and β-5′ inter-unit linkages per aromatic lignin unit. Simultaneously, the removal of p-hydroxyphenyl, guaiacyl, and syringyl lignin units and of p-coumaric and ferulic acids, as well as a moderate decrease of tricin units, was observed without a substantial change in the wood polysaccharide signals. Especially noteworthy was the formation of Cα-oxidized lignin units during the enzymatic treatment.     

NMR Characterization of C3H and HCT Down-Regulated Alfalfa Lignin

Independent down-regulation of genes encoding p-coumarate 3-hydroxylase (C3H) and hydroxycinnamoyl CoA:shikimate/quinate hydroxycinnamoyl transferase (HCT) has been previously shown to reduce the recalcitrance of alfalfa and thereby improve the release of fermentable sugars during enzymatic hydrolysis. In this study, ball-milled lignins were isolated from wild-type control, C3H, and HCT gene down-regulated alfalfa plants. One- and two-dimensional nuclear magnetic resonance (NMR) techniques were utilized to determine structural changes in the ball-milled alfalfa lignins resulting from this genetic engineering. After C3H and HCT gene down-regulation, significant structural changes had occurred to the alfalfa ball-milled lignins compared to the wild-type control. A substantial increase in p-hydroxyphenyl units was observed in the transgenic alfalfa ball-milled lignins as well as a concomitant decrease in guaiacyl and syringyl units. Two-dimensional ¹³C–¹H heteronuclear single quantum coherence correlation NMR, one-dimensional distortionless enhancement by polarization transfer-135, and ¹³C NMR measurement showed a noteworthy decrease in methoxyl group and β-O-4 linkage contents in these transgenic alfalfa lignins. ¹³C NMR analysis estimated that C3H gene down-regulation reduced the methoxyl content by ~55–58% in the ball-milled lignin, while HCT down-regulation decreased methoxyl content by ~73%. The gene down-regulated C3H and HCT transgenic alfalfa lignin was largely a p-hydroxyphenyl (H) rich type lignin. Compared to the wild-type plant, the C3H and HCT transgenic lines had an increase in relative abundance of phenylcoumaran and resinol in the ball-milled lignins.     

Isolation and analysis of cell wall material from beeswing wheat bran (Triticum aestivum)

Cell wall material (CWM) isolated from beeswing wheat bran contains 66% carbohydrate, 12% Klason lignin, 6% protein and 4% ash. The relative proportions of sugars in the CWM are arabinose 34%, xylose 26%, galactose 2%, glucose 32% and uronic acid 6%. The uronic acid was shown to consist of glucuronic acid and its 4-O-Me analogue in the ratio 1.8:1. Partial acid hydrolysis of the CWM yielded neutral sugars and a uronic acid fraction. The latter was shown to contain Glc p A-(1→2)-Xyl p and Glc p A-(1→2)-O-Xyl p-(1→4)-Xyl p and their 4-O-Me substituted uronic acid analogues. Methylation analysis of the whole CWM and partially degraded methylated CWM revealed the nature of the constituent glycosidic linkages. From the combined evidence we infer that the major structural features of the non-cellulosic polysaccharides are a linear chain of xylopyranose units joined by (1→4)-linkages, and arabinofuranose, xylose, galactose (and uronic acid) end groups, which in at least some of the polysaccharides, are attached directly by (1→2)- and/or (1→3)-linkages to the xylan chain. The CWM has been fractionated by successive extractions with water at 80°, 0.2 M (NH₄)₂C₂O₄ at 80°, Na chlorite/HOAc at 70°, 0.2 M (NH₄)₂C₂O₄ at 80°, 1 M and 4 M KOH, and the neutral sugar composition of the fractions determined. It is concluded from these and other experiments that the CWM contains two main types of polysaccharides, the arabinoxylans and cellulosic polymers, and that phenolic ester linkages play a role in holding them together.     

Effects on Lignin Structure of Coumarate 3-Hydroxylase Downregulation in Poplar

The lignin structural ramifications of coumarate 3-hydroxylase (C3H) downregulation have not been addressed in hardwoods. Such information is required to accompany an assessment of the digestibility and bioenergy performance characteristics of poplar, in particular. Structurally rich 2D NMR methods were applied to the entire lignin fraction to delineate lignin p-hydroxyphenyl:guaiacyl:syringyl (H:G:S) levels and linkage distribution changes (and to compare with traditional degradative analyses). C3H downregulation reduced lignin levels by half and markedly increased the proportion of H units relative to the normally dominant G and S units. Relative stem H unit levels were up by ???100-fold to ???31?%, almost totally at the expense of G units; differences in the lignin interunit linkage distributions were more subtle. The H level in the most drastically C3H-downregulated transgenic poplar falls well beyond the H:G:S compositional bounds of normal angiosperms. The response observed here, in poplar, differs markedly from that reported for alfalfa where the S:G ratio remained almost constant even at substantial H levels, highlighting the often differing responses among plant species.     

Treatment of Furfural Residue by Solvent Extraction for Enzymatic Hydrolysis: Effect of Delignification on the Structure and Digestibility

The effect of different treatments on the enzymatic hydrolysis of furfural residue (FR) was investigated in delignification and structural features. In this case, hot water, ethanol, sodium hydroxide, alkali ethanol, and alkaline hydrogen peroxide solution (AHP) were selected as the delignification solvents. The structure and morphology of the original and treated samples were comparatively studied by diffuse reflectance infrared Fourier transform spectrometry (DRIFT), XRD, SEM, and CP/MAS ¹³C NMR. After AHP treatment, the ratio of total lignin to cellulose content in FR and the absorbance ratio of lignin to cellulose (A ₁₅₀₈/A ₁₀₅₇) on the sample surface in the DRIFT spectra was reduced from 0.99 to 0.13 and from 0.40 to 0.04, respectively, which resulted in the highest conversion of cellulose to glucose (99.3 %). It was found that the crystallinity index of FR linearly increased with the decrease of total lignin to cellulose ratio. DRIFT analysis indicated that the high lignin content on the sample surface resulted in a low enzymatic hydrolysis efficiency.     

Microplate-based high throughput screening procedure for the isolation of lipid-rich marine microalgae

Background

Termites are highly effective at degrading lignocelluloses, and thus can be used as a model for studying plant cell-wall degradation in biological systems. However, the process of lignin deconstruction and/or degradation in termites is still not well understood.

Methods

We investigated the associated structural modification caused by termites in the lignin biomolecular assembly in softwood tissues crucial for cell-wall degradation. We conducted comparative studies on the termite-digested (i.e. termite feces) and native (control) softwood tissues with the aid of advanced analytical techniques: ¹³C crosspolarization magic angle spinning and nuclear magnetic resonance (CP-MAS-NMR) spectroscopy, flash pyrolysis with gas chromatography mass spectrometry (Py-GC/MS), and Py-GC-MS in the presence of tetramethylammonium hydroxide (Py-TMAH)-GC/MS.

Results

The ¹³C CP/MAS NMR spectroscopic analysis revealed an increased level of guaiacyl-derived (G unit) polymeric framework in the termite-digested softwood (feces), while providing specific evidence of cellulose degradation. The Py-GC/MS data were in agreement with the ¹³C CP/MAS NMR spectroscopic studies, thus indicating dehydroxylation and modification of selective intermonomer side-chain linkages in the lignin in the termite feces. Moreover, Py-TMAH-GC/MS analysis showed significant differences in the product distribution between control and termite feces. This strongly suggests that the structural modification in lignin could be associated with the formation of additional condensed interunit linkages.

Conclusion

Collectively, these data further establish: 1) that the major β-O-4' (β-aryl ether) was conserved, albeit with substructure degeneracy, and 2) that the nature of the resulting polymer in termite feces retained most of its original aromatic moieties (G unit-derived). Overall, these results provide insight into lignin-unlocking mechanisms for understanding plant cell-wall deconstruction, which could be useful in development of new enzymatic pretreatment processes mimicking the termite system for biochemical conversion of lignocellulosic biomass to fuels and chemicals.     

One-dimensional zig-zag type coordination polymers of Ni(II) and Cu(II) containing 1,3-benzenedicarboxylate and 1,3-diaminopropane: Structural, spectral and thermal studies

Two coordination polymers [Ni(ipt)(dap)₂]_n (1) and [Cu(ipt)(dap)H₂O]_n · nH₂O (2) with an overall one-dimensional arrangement and having isophthalate (ipt) as bridging moieties and chelating 1,3-diaminopropane (dap) as structure modulating units have been prepared and characterized by crystallographic, spectroscopic and thermo-analytical studies. Both have an overall one-dimensional zig-zag nature but with a distorted octahedral NiN₄O₂ chromophore for 1 and a distorted square pyramidal CuN₂O₃ chromophore for 2. Even though the ipt units are acting as bridging units through mono-dentatively coordinating carboxylate functions in both polymers, compound 1 has the carboxylate oxygen linkages at the trans positions, while in 2 the oxygen linkages occur at the cis positions leading to a different type of zig-zag arrangement. Relevant spectral and bonding parameters also could be evaluated for the compounds using UV-Vis and EPR spectra. Thermal stability and possible structural modifications on thermal treatment of the compounds were also investigated and the relevant thermodynamic and kinetic parameters evaluated from the thermal data.     

Optimization of microwave-assisted FeCl3 pretreatment conditions of rice straw and utilization of Trichoderma viride and Bacillus pumilus for production of reducing sugars

In this study, Box-Behnken design (BBD) and response surface methodology (RSM) were used to optimize microwave-assisted FeCl₃ pretreatment conditions of rice straw with respect to FeCl₃ concentration, microwave intensity, irradiation time and substrate concentration. When rice straw was pretreated at the optimal conditions of FeCl₃ concentration, 0.14 mol/L; microwave intensity, 160 °C; irradiation time, 19 min; substrate concentration, 109 g/L; and inoculated with Trichoderma viride and Bacillus pumilus, the production of reducing sugars was 6.62 g/L. This yield was 2.9 times higher than that obtained with untreated rice straw. The microorganisms degraded 37.8% of pretreated rice straw after 72 h. The structural characteristic analyses suggest that microwave-assisted FeCl₃ pretreatment damaged the silicified waxy surface of rice straw, disrupted almost all the ether linkages between lignin and carbohydrates, and removed lignin.     

Molecular weight averages and 13C NMR intensities provide evidence for branching in proanthocyanidin polymers

Molecular weight distributions for several proanthocyanidin polymers (condensed tannins) have previously been shown to be characterized by DP_w/DP_n > 2, where DP denotes the degree of polymerization. Molecular weight ratios of the size observed experimentally are expected if a few percent of the units form trifunctional branch points. An independent assessment of the extent of branching can be obtained from analysis of intensities of resonances in the ¹³C NMR spectra. Similar branch contents are deduced from DP_w/DP_n and from the spectral analysis. In the case of the Chinese quince (Chaenomeles chinensis) polymer, about 3% of the epicatechin units form trifunctional branch points.     

Conversions of the Bjorkman lignin from the european spruce (Picea abies) in trifluoromethanesulfonic acid

The Bjorkman lignin from the European spruce (Picea abies) was destructed in trifluoromethane-sulfonic super acid (CF₃SO₃H) at 0°C for 2 h. Masses of the molecules in the starting Bjorkman lignin (600?C4400 Da) and masses of products of the lignin conversion in CF₃SO₃H (150?C1800 Da) were determined by the Matrix-Assisted Laser Desorption Ionization mass spectrometry (MALDI mass spectrometry).     

Monolignol acylation and lignin structure in some nonwoody plants: a 2D NMR study

Lignins from three nonwoody angiosperms were analyzed by 2D NMR revealing important differences in their molecular structures. The Musatextilis milled-wood-lignin (MWL), with a syringyl-to-guaiacyl (S/G) ratio of 9, was strongly acylated (near 85% of side-chains) at the γ-carbon by both acetates and p-coumarates, as estimated from ¹H-¹³C correlations in C_γ-esterified and C_γ-OH units. The p-coumarate H_3,5-C_3,5 correlation signal was completely displaced by acetylation, and disappeared after alkali treatment, indicating that p-coumaric acid was esterified maintaining its free phenolic group. By contrast, the Cannabissativa MWL (S/G ∼0.8) was free of acylating groups, and the Agavesisalana MWL (S/G ∼4) showed high acylation degree (near 80%) but exclusively with acetates. Extensive C_γ-acylation results in the absence (in M.textilis lignin) or low abundance (4% in A.sisalana lignin) of β-β′ resinol linkages, which require free C_γ-OH to form the double tetrahydrofuran ring. However, minor signals revealed unusual acylated β-β′ structures confirming that acylation is produced at the monolignol level, in agreement with chromatographic identification of γ-acetylated sinapyl alcohol among the plant extractives. In contrast, resinol substructures involved 22% side-chains in the C.sativa MWL. The ratio between β-β′ and β-O-4′ side-chains in these and other MWL varied from 0.32 in C.sativa MWL to 0.02 in M.textilis MWL, and was inversely correlated with the degree of acylation. The opposite was observed for the S/G ratio that was directly correlated with the acylation degree. Monolignol acylation is discussed as a mechanism potentially involved in the control of lignin structure.     

Decay of cultivated apricot wood (Prunus armeniaca) by the ascomycete Hypocrea sulphurea,using solid state 13C NMR and off-line TMAH thermochemolysis with GC–MS

Chemical changes of polysaccharides and lignin in Prunus armeniaca decayed by the ascomycete fungus Hypocrea sulphurea were investigated. Solid-state ¹³C NMR spectra showed that polysaccharides were the main components of fresh and decayed wood. Decomposition of cellulose and hemicellulose by the fungus was minimal although a slight preference for crystalline as compared with amorphous cellulose was recognised. Comparison of the signal intensity of the resonance at 145 ppm in fresh and decomposed wood suggested that the fungus had decomposed tannin constituents. Thermochemolysis with tetramethylammonium hydroxide (TMAH) and product identification by gas chromatography–mass spectrometry revealed that the ratio of syringyl-type (S) units to guaiacyl-type (G) units decreased from 1.8 to 1.1 following fungal attack. Increases in both guaiacyl and syringyl acid-aldehyde ratios (Ad/Al)_G, (Ad/Al)_S together with an increase from 0.82 to 3.54 in the ratio of methyl 3,4-dimethoxybenzoate to the sum of 1-(3,4-dimethoxyphenyl)-1,2,3-trimethoxypropane (threo and erythro-isomers) Γ_G from the decayed wood confirmed oxidative Cα–Cβ cleavage for the mechanism of lignin decay by this ascomycete.     

Coexistence but Independent Biosynthesis of Catechyl and Guaiacyl/Syringyl Lignin Polymers in Seed Coats

Lignins are phenylpropanoid polymers, derived from monolignols, commonly found in terrestrial plant secondary cell walls. We recently reported evidence of an unanticipated catechyl lignin homopolymer (C lignin) derived solely from caffeyl alcohol in the seed coats of several monocot and dicot plants. We previously identified plant seeds that possessed either C lignin or traditional guaiacyl/syringyl (G/S) lignins, but not both. Here, we identified several dicot plants (Euphorbiaceae and Cleomaceae) that produce C lignin together with traditional G/S lignins in their seed coats. Solution-state NMR analyses, along with an in vitro lignin polymerization study, determined that there is, however, no copolymerization detectable (i.e., that the synthesis and polymerization of caffeyl alcohol and conventional monolignols in vivo is spatially and/or temporally separated). In particular, the deposition of G and C lignins in Cleome hassleriana seed coats is developmentally regulated during seed maturation; C lignin appears successively after G lignin within the same testa layers, concurrently with apparent loss of the functionality of O-methyltransferases, which are key enzymes for the conversion of C to G lignin precursors. This study exemplifies the flexible biosynthesis of different types of lignin polymers in plants dictated by substantial, but poorly understood, control of monomer supply by the cells.     

An efficient procedure for studying pectin structure which combines limited depolymerization and 13C NMR

A protocol for partial thermally-induced depolymerization of differently methoxylated pectin samples is described. The resulting macromolecules have been fully characterized with various complementary techniques, such as size exclusion chromatography (SEC), potentiometry, viscometry and ¹³C NMR. Optimum conditions afford samples at 50–80% yield with weight-average molecular weights in the 4 to 20 kDa range. The major fraction of these polysaccharides adopts the random-coil conformation and such samples are suitable for ¹³C NMR structural studies at room temperature. The methoxyl distributions of two apple pectin samples with a degree of esterification (DE) between 54 and 74% and a citrus pectin (DE, 72%) were shown to be random in nature, whereas that of a lightly methoxylated apple pectin (DE 39%) was partially blockwise. The carbon relaxation parameters of the depolymerized pectins attain asymptotic values for M_W > 4 kDa. The M_W values estimated from intrinsic viscosity data with the Mark-Houwink relationship reported for native pectins are in good agreement with those obtained by either end-group analysis (NMR) or SEC. Thus, all the physicochemical data indicate that the secondary structure of the isolated chains of depolymerized pectin is closely related to that of the parent polymers. Finally, pectinmethylesterase activity towards the depolymerized pectins was similar to that of the untreated samples. Received: 10 July 1997 / Accepted: 12 November 1997     

Properties of nonvolatile and antibacterial bioboard produced from bamboo macromolecules by hot pressing

Employing the antibacterial property of industrial bamboo vinegar (IBV) and the photocatalytic degradation of TiO₂, bamboo macromolecules were pretreated and processed into nonvolatile and antibacterial bio board (NVABB). The NVABB was then analyzed by conducting Fourier-transform infrared spectroscopy, thermogravimetric analysis and differential thermal analysis. Results show that NVABB samples had average density of 0.96?g/cm³, which is appropriate for application. In terms of physical and mechanical properties, the best NVABB sample obtained from IBV, TiO₂ and bamboo had an IBV pretreatment time of 10?min, 2% TiO₂ and 1% bamboo charcoal. Fourier-transform infrared spectroscopy demonstrated that optimum conditions for hot pressing were a temperature of 170?°C, duration of 15?min and the addition of IBV and TiO₂. Thermogravimetric analysis/differential thermal analysis curves suggest that the thermal degradation of NVABB was less than that of bamboo and that hot pressing obviously increased the thermal stability of HDBB samples. Analysis of the antimicrobial effect revealed that IBV pretreatment improves the antibacterial property of NVABB.