Glucose biosensor based on titanium dioxide-multiwall carbon nanotubes-chitosan composite and functionalized gold nanoparticles

In this paper, a new glucose biosensor was prepared. At first, Prussian blue (PB) was electrodeposited on a glassy carbon electrode (GCE) modified by titanium dioxide-multiwall carbon nanotubes-chitosan (TiO₂-MWNTs-CS) composite, and then gold nanoparticles functionalized by poly(diallyldimethylammonium chloride) (PDDA-Au) were adsorbed on the PB film. Finally, the negatively charged glucose oxidase (GOD) was self-assembled on to the positively charged PDDA-Au. The electrochemical performances of the modified electrodes had been studied by cyclic voltammetry (CV) and amperometric methods, respectively. In addition, the stepwise fabrication process of the as-prepared biosensor was characterized by scanning electron microscopy. PDDA-Au nanoparticles were characterized by ultraviolet–vis absorption spectroscopy and transmission electron microscopy. Under the optimal conditions, the as-prepared biosensor exhibited a good response performance to glucose with a linear range from 6 μM to 1.2 mM with a detection limit of 0.1 μM glucose (S/N = 3). In addition, this work indicated that TiO₂-MWNTs-CS composite and PDDA-Au nanoparticles held great potential for constructing biosensors.     

Tunable Assembly of Peptide-coated Gold Nanoparticles

The interaction between peptides and gold surfaces has increasingly been of interest for bionanotechnology applications. To more fully understand how to control such interactions, we have studied the optical properties of peptide-modified gold nanoparticles as a function of peptide composition, pH of the surrounding medium, and peptide concentration. We show using localized surface plasmon resonance, transmission electron microscopy, and surface-enhanced Raman scattering (SERS) that selected “gold-binding peptides” (GBPs), similar to those isolated for binding to gold films using yeast display, can bind to gold nanoparticles at a variety of pHs. Peptide modifications of nanoparticles can lead to irreversible particle aggregation when the pH of the solution is kept below the isoelectric point (pI) of the peptide. However, at pHs above the peptide’s pI, particles remain stable in solution, and peptides remain bound to the particles possibly through amine coordination of gold. Additionally, we demonstrate the potential in using SERS for the direct detection of GBPs on gold-silica nanoshells, eliminating the need for indirect labeling methods.     

高速DNA序列分析

高速DNA序列分析是人类基因组研究的关键技术．文章对高速DNA序列分析方法如阵列毛细管电泳、超薄层凝胶板电泳、质谱、杂交法、原子探针法、流动单分子荧光检测法等新进展进行了评论．     

Application of the analytical transmission electron microscopy techniques for detection,identification and visualization of localization of nanoparticles of titanium and cerium oxides in mammalian cells

This work represents the results of the study on applicability of the modern methods of analytical transmission electron microscopy (TEM) for detection, identification and visualization of localization of nanoparticles of titanium and cerium oxides in A549, human lung adenocarcinoma cell line. Comparative analysis was performed for images of the nanoparticles in cells obtained in the bright-field mode of TEM, bright-field scanning TEM, and high-angle annular dark field scanning TEM. For identification of nanoparticles in the cells, the analytical techniques, energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy, were compared when used in the modes of obtaining energy spectra from different particles and of element mapping. It was shown that electron tomography is applicable to confirm that nanoparticles are localized in the sample rather than brought in by contamination. The possibilities and fields of using different techniques of analytical TEM for detection, visualization and identification of nanoparticles in biological samples are discussed.     

Nanoanalytics for medicine

The applications of atomic force microscopy and the methods based on atomic force microscopy that can be useful in medical nanoanalytics have been reviewed. The main fields of possible application of scanning probe microscopy in medicine have been outlined. Among these are studying the resistance of bacterial cells to modern antibiotics and drugs, morphological analysis of blood components, trichology, nanotoxicology, DNA sequencing, and biocompatibility of medicinal materials. Examples of application of atomic force microscopy for studies in these fields have been considered, and prospects for its use in medicine have been demonstrated.     

Nanoanalytics for medicine

The applications of atomic force microscopy and the methods based on atomic force microscopy that can be useful in medical nanoanalytics have been reviewed. The main fields of possible application of scanning probe microscopy in medicine have been outlined. Among these are studying the resistance of bacterial cells to modern antibiotics and drugs, morphological analysis of blood components, trichology, nanotoxicology, DNA sequencing, and biocompatibility of medicinal materials. Examples of application of atomic force microscopy for studies in these fields have been considered, and prospects for its use in medicine have been demonstrated.     

Sorption-assisted surface conjugation: a way to stabilize laccase enzyme

Enyzme immobilization on solid surfaces is one of the most relevant methods to improve enzyme activity and stability under harsh conditions over extended periods. A typically interesting application is the immobilization of laccases, multicopper enzymes oxidizing aromatic compounds, to solid surfaces in order to develop valuable tools for the elimination of micropollutants in wastewater. Laccase of the white-rot fungus Coriolopsis polyzona has been successfully immobilized on fumed silica nanoparticles using a novel method. It consists in the sorption of the enzyme to amino-modified silica nanoparticles and the subsequent covalent cross-linking using glutaraldehyde as a homobifunctional linker. The so-produced nanoparticulate material has been characterized by means of scanning electron microscopy and Brunauer–Emmett–Teller surface area analysis revealing modifications of the surface structure and area during the coupling procedure. Laccase immobilization on spherical nanoparticles produced according to the method of St?ber has been shown to be much less efficient than on fumed silica nanoparticles. Long-term stability assays revealed that the novel developed method allows a drastic stabilization of the enzyme. In real wastewater, 77% of the laccase activity remained on the nanoparticles over 1 month, whereas the activity of free laccase dropped to 2.5%. The activity loss on the nanoparticles resulted from partial inactivation of the immobilized enzymes and additional release into the surrounding solution with subsequent fast inactivation of the free enzymes, since almost no activity was found in the supernatants.     

The emergence of multiple particle tracking in intracellular trafficking of nanomedicines

A growing number of nanoparticle systems, termed “nanomedicines”, are being developed for diagnostic and therapeutic applications. Nanoparticles can employ various cellular entry pathways and trafficking mechanisms to effectively deliver drugs, biomolecules, and imaging agents to precise sub-cellular locations. However, the dynamic transport of nanoparticles through the complex intracellular environment is not well understood, having been primarily studied with static or bulk averaged methods in the past. Such techniques do not provide detailed information regarding the transport mechanism and rates of individual nanoparticles, where understanding of the interaction of nanoparticles with the cellular environment remains incomplete. Recent advances in live-cell fluorescence microscopy and real-time multiple particle tracking (MPT) have facilitated an improved understanding of cell trafficking pathways. Understanding the dynamic transport of nanoparticles as they are delivered into complex cellular components may lead to rational improvements in the design of nanomedicines. This review discusses different cellular uptake and trafficking pathways of nanomedicines, briefly highlights current fluorescence microscopy tools, and provides examples from the recent literature on the use of MPT and its applications.     

Conjugating folic acid to gold nanoparticles through glutathione for targeting and detecting cancer cells

Gold nanoparticles (GNPs) were modified with glutathione (GSH) to form GSH-capped GNPs, which have carboxyl groups on the surface of these nanoparticles. Then folic acid (FA) was conjugated with GNPs through the reaction between amino group of FA and carboxyl group of GSH. These folic acid-conjugated nanoparticles (FA-GSH-GNPs) were stable in aqueous solution over a broad range of pH and ionic strength values. The targeting of FA-GSH-GNPs in human cervices carcinoma cells (HeLa cells) with high-level folate receptor expression was confirmed by transmission electron microscopy (TEM) and confocal laser scanning microscopy (CLSM). No cellular uptake of these nanoparticles was observed in A549 cells lack of folate receptor. HeLa cells and mouse fibroblasts incubated with FA-GSH-GNPs were assayed by measuring the relative absorbance of the supernatant collected at low-speed centrifugation. Based on this simple spectroscopic method, HeLa cells have been detected with a detection limit of 10² cells/mL.     

Rapid biological synthesis of silver nanoparticles using plant leaf extracts

Five plant leaf extracts (Pine, Persimmon, Ginkgo, Magnolia and Platanus) were used and compared for their extracellular synthesis of metallic silver nanoparticles. Stable silver nanoparticles were formed by treating aqueous solution of AgNO₃ with the plant leaf extracts as reducing agent of Ag⁺ to Ag⁰. UV-visible spectroscopy was used to monitor the quantitative formation of silver nanoparticles. Magnolia leaf broth was the best reducing agent in terms of synthesis rate and conversion to silver nanoparticles. Only 11 min was required for more than 90% conversion at the reaction temperature of 95 °C using Magnolia leaf broth. The synthesized silver nanoparticles were characterized with inductively coupled plasma spectrometry (ICP), energy dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and particle analyzer. The average particle size ranged from 15 to 500 nm. The particle size could be controlled by changing the reaction temperature, leaf broth concentration and AgNO₃ concentration. This environmentally friendly method of biological silver nanoparticles production provides rates of synthesis faster or comparable to those of chemical methods and can potentially be used in various human contacting areas such as cosmetics, foods and medical applications.     

Mechanistic approach for fabrication of gold nanoparticles by Nitzschia diatom and their antibacterial activity

The problem of chemically synthesized nanoproducts motivated scientific community to explore ecofriendly methods of nanosynthesis. Diatoms belong to a group of aquatic, unicellular, photosynthetic microalgae have been scarcely investigated as a source of reducing and capping agents for nanosynthesis of pesticides and antibiotics. The present study reports a novel ecofriendly method for the fabrication of bioactive gold nanoparticles using locally isolated Nitzschia diatoms. The diatom-fabricated gold nanoparticles show characteristic ruby red colored with sharp absorbance peak at 529 nm. Electron microscopy confirmed irregular shape of gold nanoparticles, with average size of 43 nm and zeta potential of −16.8 mV. The effects of gold nanoparticles on diatom viability were investigated using light and electron microscopy. The mechanistic approach to shed light on how diatoms reacted after exposure to gold metal salt revealed that exposure to gold chloride triggers elevated levels of catalase and peroxidase (12.76 and 14.43 unit/mg protein, respectively) to relieve reactive oxygen species (ROS) stress induced by gold salt exposure. Investigation studies on mechanisms behind Nitzschia-mediated gold nanoparticles fabrication outlined the role of diatom proteins, polysaccharides in reduction, and stabilization of nanoparticles as confirmed by FT-IR analysis. Bioactivity of gold nanoparticles was accessed by coupling them with antibiotics (penicillin and streptomycin), which increased their antibacterial activity compared to individual nanoparticles and antibiotics (Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus). Overall, the present novel phyco-nanotechnological approach is a promising tool to be used as sustainable strategy in green nanotechnology as well as to reduce use of antibiotics in microbial control.     

Biological synthesis of gold nanoparticles using Magnolia kobus and Diopyros kaki leaf extracts

Leaf extracts of two plants, Magnolia kobus and Diopyros kaki, were used for ecofriendly extracellular synthesis of metallic gold nanoparticles. Stable gold nanoparticles were formed by treating an aqueous HAuCl₄ solution using the plant leaf extracts as reducing agents. UV–visible spectroscopy was used for quantification of gold nanoparticle synthesis. Only a few minutes were required for >90% conversion to gold nanoparticles at a reaction temperature of 95 °C, suggesting reaction rates higher or comparable to those of nanoparticle synthesis by chemical methods. The synthesized gold nanoparticles were characterized with inductively coupled plasma spectrometry (ICP), energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and particle analysis using a particle analyzer. SEM and TEM images showed that a mixture of plate (triangles, pentagons, and hexagons) and spherical structures (size, 5–300 nm) were formed at lower temperatures and leaf broth concentrations, while smaller spherical shapes were obtained at higher temperatures and leaf broth concentrations.     

Hydroxycamptothecin-loaded nanoparticles enhance target drug delivery and anticancer effect

Background  

Hydroxycamptothecin (HCPT) has been shown to have activity against a broad spectrum of cancers. In order to enhance its tissue-specific delivery and anticancer activity, we prepared HCPT-loaded nanoparticles made from poly(ethylene glycol)-poly(γ-benzyl-L-glutamate) (PEG-PBLG), and then studied their release characteristics, pharmacokinetic characteristics, and anticancer effects. PEG-PBLG nanoparticles incorporating HCPT were prepared by a dialysis method. Scanning electron microscopy (SEM) was used to observe the shape and diameter of the nanoparticles. The HCPT release characteristics in vitro were evaluated by ultraviolet spectrophotometry. A high-performance liquid chromatography (HPLC) detection method for determining HCPT in rabbit plasma was established. The pharmacokinetic parameters of HCPT/PEG-PBLG nanoparticles were compared with those of HCPT.     

Streptavidin conjugates with gold nanoparticles for visualization of single DNA interactions on the silicon surface

Applicability of scanning electron microscopy (SEM) for visualization of individual acts of DNA hybridization with oligonucleotide probes has been investigated using gold nanoparticles as a label. DNA or oligonucleotides were labeled with biotin molecules, which were then detected in DNA duplexes using a streptavidin conjugate with gold nanoparticles. Effective imaging of DNA duplexes was possible using the conjugate prepared by covalent binding. The detection limit of the model oligonucleotide of 19 bases was 20 pg.     

Black tea manufacture.

A comparison of the structure of the leaf manufactured by different processing systems has been made by transmission and scanning electron microscopy. A single harvest of clonal leaf was divided into batches and commercially manufactured by Orthodox, Rotorvane only, Rotorvane combined with Cutting, Tearing and Curling and the Lowrie Tea Processor methods. The different manufactures produced leaf with characteristically different damage patterns. The relationship of the different forms of damage to the qualities of made tea is discussed.     

A novel enzymatic hydrogen peroxide biosensor based on Ag/C nanocables

A novel enzymatic hydrogen peroxide sensor was successfully fabricated based on the nanocomposites containing of Ag/C nanocables and gold nanoparticles (AuNPs). Ag/C nanocables have been synthesized by a hydrothermal method and then AuNPs were assembled on the surface of Ag/C nanocables. The nanocomposites were confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). The above nanocomposites have satisfactory chemical stability and excellent biocompatibility. Cyclic voltammetry (CV) was used to evaluate the electrochemical performance of the Ag/C/Au nanocomposites at glassy carbon electrode (GCE). The results indicated that the Ag/C/Au nanocomposites exhibited excellent electrocatalytic activity to the reduction of H(2)O(2). It offered a linear range of 6.7×10(-9) to 8.0×10(-6) M, with a detection limit of 2.2×10(-9) M. The apparent Michaelis-Menten constant of the biosensor was 51.7×10(-6) M. These results indicated that Ag/C/Au nanocomposites have potential for constructing of a variety of electrochemical biosensors.     

Atomic force microscopy of living cells: advances and future outlooks

The advances of the method of atomic force microscopy for investigating the animal cells and an analysis of its development have been reviewed, with much attention being given to studies of living cells. The features and problems of the method have been considered, and a number of special methods based on the use of atomic force microscopy have been analyzed. The problems of choosing the geometry of probes for studies of animal cells, determination of cell adhesion on substrate, mapping of the cell surface using chemically modified cantilevers, and the distribution of molecular components inside the cell with the use of micro- and nanosurgical approaches have been discussed. The problems of combining the atomic force microscopy with optical and laser scanning confocal microscopy have been considered. Possible applications of the method in biotechnology and medicine are discussed.     

Instrumental analysis of microbiologically influenced corrosion

Appropriate application of techniques for detection andmonitoring of microbiologically influenced corrosion isessential for understanding the mechanistic nature of theinteractions and for obtaining control methods. This paperreviews techniques and methods applied tomicrobiologically influenced corrosion in recent years.The techniques presented in this paper includeelectrochemical noise measurement, concentric electrodes,scanning vibrating electrode mapping, electrochemicalimpedance spectroscopy, atomic force microscopy,confocal laser microscopy, Fourier transform infraredspectroscopy, x-ray photoelectron spectroscopy, Augerelectron spectroscopy, extended x-ray absorption finestructure and utilization of piezoelectric materials. Thesetechniques are reviewed regarding the heterogeneouscharacteristics of microbial consortia and their possibleinfluences on metal substrata. We hope this review willmotivate application and combination of new techniquesfor practical detection and on-line monitoring of theimpact of biofilms on engineering alloys.     

Biosynthesis and antibacterial activity of ZnO nanoparticles using Trifolium pratense flower extract

Zinc oxide (ZnO) has broad applications in various areas. Nanoparticle synthesis using plants is an alternative to conventional physical and chemical methods. It is known that the biological synthesis of nanoparticles is gaining importance due to its simplicity, eco-friendliness and extensive antimicrobial activity. Also, in this study we report the synthesis of ZnO nanoparticles using Trifolium pratense flower extract. The prepared ZnO nanoparticles have been characterized by UV–Vis absorption spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM) with Energy dispersive X-ray analysis (EDX). Besides, this study determines the antimicrobial efficacy of the synthesized ZnO nanoparticles against clinical and standard strains of S. aureus and P. aeruginosa and standard strain of E. coli.     

Preparation and Optical Characterization of Core–Shell Bimetal Nanoparticles

Chemical approaches allow for the synthesis of highly defined metal heteronanostructures, such as core–shell nanospheres. Because the material in the metal nanoparticles determines the plasmon resonance-induced absorption band, control of particle composition results in control of the position of the absorption band. Metal deposition on gold or silver nanoparticles yielded core–shell particles with modified optical properties. UV–vis spectroscopy on solution-grown, as well as surface-grown, particles was conducted and provided ensemble measurements in solution. Increasing the layers of a second metal leads to a shift in the absorption band. A shell diameter comparable to the original particle diameter leads to a predominant influence by the shell material. Extent of shell growth could be controlled by reaction time or the concentration of metal salt or reducing agent. Besides optical characterization, the utilization of atomic force microscopy, scanning electron microscopy, and transmission electron microscopy yielded important information about the ultrastructure of nanoparticle complexes. Surface-grown core–shell particles were superior in terms of achievable shell thickness, because of difficulties encountered with solution-grown particles due to salt-induced aggregation.