More Than a Pore: The Interplay of Pore-Forming Proteins and Lipid Membranes

Pore-forming proteins (PFPs) punch holes in their target cell membrane to alter their permeability. Permeabilization of lipid membranes by PFPs has received special attention to study the basic molecular mechanisms of protein insertion into membranes and the development of biotechnological tools. PFPs act through a general multi-step mechanism that involves (i) membrane partitioning, (ii) insertion into the hydrophobic core of the bilayer, (iii) oligomerization, and (iv) pore formation. Interestingly, PFPs and membranes show a dynamic interplay. As PFPs are usually produced as soluble proteins, they require a large conformational change for membrane insertion. Moreover, membrane structure is modified upon PFPs insertion. In this context, the toroidal pore model has been proposed to describe a pore architecture in which not only protein molecules but also lipids are directly involved in the structure. Here, we discuss how PFPs and lipids cooperate and remodel each other to achieve pore formation, and explore new evidences of protein-lipid pore structures.     

The mechanism of pore assembly for a cholesterol-dependent cytolysin: formation of a large prepore complex precedes the insertion of the transmembrane beta-hairpins

Perfringolysin O (PFO) is a member of the cholesterol-dependent cytolysin (CDC) family of membrane-penetrating toxins. The CDCs form large homooligomers (estimated to be comprised of up to 50 CDC monomers) that are responsible for generating a large pore in cholesterol-containing membranes of eukaryotic cells. The assembly of the PFO cytolytic complex was examined to determine whether it forms an oligomeric prepore complex on the membrane prior to the insertion of its membrane-spanning beta-sheet. A PFO oligomeric complex was formed on liposomes at both 4 degrees C and 37 degrees C and shown by SDS-agarose gel electrophoresis to be comprised of a large, comparatively homogeneous complex instead of a distribution of oligomer sizes. At low temperature, the processes of oligomerization and membrane insertion could be resolved, and PFO was found to form an oligomer without significant membrane insertion of its beta-hairpins. Furthermore, PFO was found to increase the ion conductivity through a planar bilayer by large and discrete stepwise changes in conductance that are consistent with the insertion of a preassembled pore complex into the bilayer. The combined results of these analyses strongly support the hypothesis that PFO forms a large oligomeric prepore complex on the membrane surface prior to the insertion of its transmembrane beta-sheet.     

Unfolding events in the water-soluble monomeric Cry1Ab toxin during transition to oligomeric pre-pore and membrane-inserted pore channel

The insecticidal crystal (Cry) proteins produced by Bacillus thuringiensis undergo several conformational changes from crystal inclusion protoxins to membrane-inserted channels in the midgut epithelial cells of the target insect. Here we analyzed the stability of the different forms of Cry1Ab toxin, monomeric toxin, pre-pore complex, and membrane-inserted channel, after urea and thermal denaturation by monitoring intrinsic tryptophan fluorescence of the protein and 1-anilinonaphthalene-8-sulfonic acid binding to partially unfolded proteins. Our results showed that flexibility of the monomeric toxin was dramatically enhanced upon oligomerization and was even further increased by insertion of the pre-pore into the membrane as shown by the lower concentration of chaotropic agents needed to achieve unfolding of the oligomeric species. The flexibility of the toxin structures is further increased by alkaline pH. We found that the monomer-monomer interaction in the pre-pore is highly stable because urea promotes oligomer denaturation without disassembly. Partial unfolding and limited proteolysis studies demonstrated that domains II and III were less stable and unfold first, followed by unfolding of the most stable domain I, and also that domain I is involved in monomer-monomer interaction. The thermal-induced unfolding and analysis of energy transfer from Trp residues to bound 1-anilinonaphthalene-8-sulfonic acid dye showed that in the membrane-inserted pore domains II and III are particularly sensitive to heat denaturation, in contrast to domain I, suggesting that only domain I may be inserted into the membrane. Finally, the insertion into the membrane of the oligomeric pre-pore structure was not affected by pH. However, a looser conformation of the membrane-inserted domain I induced by neutral or alkaline pH correlates with active channel formation. Our studies suggest for the first time that a more flexible conformation of Cry toxin could be necessary for membrane insertion, and this flexible structure is induced by toxin oligomerization. Finally the alkaline pH found in the midgut lumen of lepidopteran insects could increase the flexibility of membrane-inserted domain I necessary for pore formation.     

Assembly and topography of the prepore complex in cholesterol-dependent cytolysins

Cholesterol-dependent cytolysins are a family of poreforming proteins that have been shown to be virulence factors for a large number of pathogenic bacteria. The mechanism of pore formation for these toxins involves a complex series of events that are known to include binding, oligomerization, and insertion of a transmembrane beta-barrel. Several features of this mechanism remain poorly understood and controversial. Whereas a prepore mechanism has been proposed for perfringolysin O, a very different mechanism has been proposed for the homologous member of the family, streptolysin O. To distinguish between the two models, a novel approach that directly measures the dimension of transmembranes pores was used. Pore formation itself was examined for both cytolysins by encapsulating fluorescein-labeled peptides and proteins of different sizes into liposomes. When these liposomes were re-suspended in a solution containing anti-fluorescein antibodies, toxin-mediated pore formation was monitored directly by the quenching of fluorescein emission as the encapsulated molecules were released, and the dyes were bound by the antibodies. The analysis of pore formation determined using this approach reveals that only large pores are produced by perfringolysin O and streptolysin O during insertion (and not small pores that grow in size). These results are consistent only with the formation of a prepore complex intermediate prior to insertion of the transmembrane beta-barrel into the bilayer. Fluorescence quenching experiments also revealed that PFO in the prepore complex contacts the membrane via domain 4, and that the individual transmembrane beta-hairpins in domain 3 are not exposed to the nonpolar core of the bilayer at this intermediate stage.     

Structural organization of membrane‐inserted hexamers formed by Helicobacter pylori VacA toxin

Helicobacter pylori colonizes the human stomach and is a potential cause of peptic ulceration or gastric adenocarcinoma. H. pylori secretes a pore‐forming toxin known as vacuolating cytotoxin A (VacA). The 88 kDa secreted VacA protein, composed of an N‐terminal p33 domain and a C‐terminal p55 domain, assembles into water‐soluble oligomers. The structural organization of membrane‐bound VacA has not been characterized in any detail and the role(s) of specific VacA domains in membrane binding and insertion are unclear. We show that membrane‐bound VacA organizes into hexameric oligomers. Comparison of the two‐dimensional averages of membrane‐bound and soluble VacA hexamers generated using single particle electron microscopy reveals a structural difference in the central region of the oligomers (corresponding to the p33 domain), suggesting that membrane association triggers a structural change in the p33 domain. Analyses of the isolated p55 domain and VacA variants demonstrate that while the p55 domain can bind membranes, the p33 domain is required for membrane insertion. Surprisingly, neither VacA oligomerization nor the presence of putative transmembrane GXXXG repeats in the p33 domain is required for membrane insertion. These findings provide new insights into the process by which VacA binds and inserts into the lipid bilayer to form membrane channels.     

Calcium-dependent open/closed conformations and interfacial energy maps of reconstituted hemichannels

Using an atomic force microscope, we have studied three-dimensional molecular topography and calcium-sensitive conformational changes of individual hemichannels. Full-length (non-truncated) Cx43 hemichannels (connexons), when reconstituted in lipid bilayer, appear as randomly distributed individual particles and clusters. They show a lack of preferential orientation of insertion into lipid membrane; in a single bilayer, connexons with protrusion of either the extracellular face or the large non-truncated cytoplasmic face are observed. Extracellular domains of these undocked hemichannels are structurally different from hemichannels in the docked gap junctional plaques examined after their exposure by force dissection or chemical dissection. Calcium induced a reversible change in the extracellular pore diameter. Hemichannels imaged in a physiological buffer with 1.8 mm Ca(+2) had the pore diameter of approximately 1.8 nm, consistent with the closed channel conformation. Reducing Ca(+2) concentration to approximately 1.4, 1, and 0 mm, which changes hemichannels from the closed to open conformation, increased the pore diameter to approximately 2.5 nm for approximately 27, 74, and 100% of hemichannels, respectively. Thus, open/close probability of the hemichannel appears to be [Ca(2+)]-dependent. Computational analysis of the atomic force microscopy phase mode imaging reveals a significantly higher interfacial energy for open hemichannels that results from the interactions between the atomic force microscope probe and the hydrophobic domains. Thus, hydrophobic extracellular domains of connexins regulate calcium-dependent conformational changes.     

Domains II and III of Bacillus thuringiensis Cry1Ab toxin remain exposed to the solvent after insertion of part of domain I into the membrane

Bacillus thuringiensis produces insecticidal proteins named Cry toxins, that are used commercially for the control of economical important insect pests. These are pore-forming toxins that interact with different receptors in the insect gut, forming pores in the apical membrane causing cell burst and insect death. Elucidation of the structure of the membrane-inserted toxin is important to fully understand its mechanism of action. One hypothesis proposed that the hairpin of α-helices 4-5 of domain I inserts into the phospholipid bilayer, whereas the rest of helices of domain I are spread on the membrane surface in an umbrella-like conformation. However, a second hypothesis proposed that the three domains of the Cry toxin insert into the bilayer without major conformational changes. In this work we constructed single Cys Cry1Ab mutants that remain active against Manduca sexta larvae and labeled them with different fluorescent probes that have different responses to solvent polarity. Different soluble quenchers as well as a membrane-bound quencher were used to compare the properties of the soluble and brush border membrane-inserted forms of Cry1Ab toxin. The fluorescence and quenching analysis presented here, revealed that domains II and III of the toxin remain in the surface of the membrane and only a discrete region of domain I is inserted into the lipid bilayer, supporting the umbrella model of toxin insertion.     

Insertion of anthrax protective antigen into liposomal membranes: effects of a receptor

Protective antigen (PA), the receptor-binding component of anthrax toxin, heptamerizes and inserts into the endosomal membrane at acidic pH, forming a pore that mediates translocation of the enzymic components of the toxin to the cytosol. When the heptameric pre-insertion form of PA (the prepore) is acidified in solution, it rapidly loses the ability to insert into membranes. To maximize insertion into model membranes, we examined two ways to bind the protein to large unilamellar vesicles (LUV). One involved attaching a His tag to the von Willebrand factor A domain of one of the PA receptors, ANTXR2, and using this protein as a bridge to bind PA to LUV containing a nickel-chelating lipid. The other involved using a His tag fused to the C terminus of PA to bind the protein directly to LUV containing the same lipid. Both ways enhanced pore formation at pH 5.0 strongly and about equally, as measured by the release of K+. Controls showed that pore formation in this system faithfully reproduced that in vivo. We also showed that binding unmodified ANTXR2 von Willebrand factor A to the prepore in solution enhanced its pore forming activity by slowing its inactivation at acidic pH. These findings indicate that an important role of PA receptors is to promote partitioning of PA into the bilayer by maintaining the prepore close to the target membrane and presumably in the optimal orientation as it undergoes the acidic pH-dependent conformational transition to the pore.     

Structural basis of pore formation by the bacterial toxin pneumolysin

The bacterial toxin pneumolysin is released as a soluble monomer that kills target cells by assembling into large oligomeric rings and forming pores in cholesterol-containing membranes. Using cryo-EM and image processing, we have determined the structures of membrane-surface bound (prepore) and inserted-pore oligomer forms, providing a direct observation of the conformational transition into the pore form of a cholesterol-dependent cytolysin. In the pore structure, the domains of the monomer separate and double over into an arch, forming a wall sealing the bilayer around the pore. This transformation is accomplished by substantial refolding of two of the four protein domains along with deformation of the membrane. Extension of protein density into the bilayer supports earlier predictions that the protein inserts beta hairpins into the membrane. With an oligomer size of up to 44 subunits in the pore, this assembly creates a transmembrane channel 260 A in diameter lined by 176 beta strands.     

The amino- and carboxyl-terminal fragments of the Bacillus thuringensis Cyt1Aa toxin have differential roles in toxin oligomerization and pore formation

The Cyt toxins produced by the bacteria Bacillus thuringiensis show insecticidal activity against some insects, mainly dipteran larvae, being able to kill mosquitoes and black flies. However, they also possess a general cytolytic activity in vitro, showing hemolytic activity in red blood cells. These proteins are composed of two outer layers of α-helix hairpins wrapped around a β-sheet. With regard to their mode of action, one model proposed that the two outer layers of α-helix hairpins swing away from the β-sheet, allowing insertion of β-strands into the membrane forming a pore after toxin oligomerization. The other model suggested a detergent-like mechanism of action of the toxin on the surface of the lipid bilayer. In this work, we cloned the N- and C-terminal domains form Cyt1Aa and analyzed their effects on Cyt1Aa toxin action. The N-terminal domain shows a dominant negative phenotype inhibiting the in vitro hemolytic activity of Cyt1Aa in red blood cells and the in vivo insecticidal activity of Cyt1Aa against Aedes aegypti larvae. In addition, the N-terminal region is able to induce aggregation of the Cyt1Aa toxin in solution. Finally, the C-terminal domain composed mainly of β-strands is able to bind to the SUV liposomes, suggesting that this region of the toxin is involved in membrane interaction. Overall, our data indicate that the two isolated domains of Cyt1Aa have different roles in toxin action. The N-terminal region is involved in toxin aggregation, while the C-terminal domain is involved in the interaction of the toxin with the lipid membrane.     

The mechanism of membrane insertion for a cholesterol-dependent cytolysin: a novel paradigm for pore-forming toxins.

Perfringolysin O (PFO), a water-soluble monomeric cytolysin secreted by pathogenic Clostridium perfringens, oligomerizes and forms large pores upon encountering cholesterol-containing membranes. Whereas all pore-forming bacterial toxins examined previously have been shown to penetrate the membrane using a single amphipathic beta hairpin per polypeptide, cysteine-scanning mutagenesis and multiple independent fluorescence techniques here reveal that each PFO monomer contains a second domain involved in pore formation, and that each of the two amphipathic beta hairpins completely spans the membrane. In the soluble monomer, these transmembrane segments are folded into six alpha helices. The insertion of two transmembrane hairpins per toxin monomer and the major change in secondary structure are striking and define a novel paradigm for the mechanism of membrane insertion by a cytolytic toxin.     

Analyzing topography of membrane-inserted diphtheria toxin T domain using BODIPY-streptavidin: at low pH, helices 8 and 9 form a transmembrane hairpin but helices 5-7 form stable nonclassical inserted segments on the cis side of the bilayer

Low pH-induced membrane insertion by diphtheria toxin T domain is crucial for A chain translocation into the cytoplasm. To define the membrane topography of the T domain, the exposure of biotinylated Cys residues to the cis and trans bilayer surfaces was examined using model membrane vesicles containing a deeply inserted T domain. To do this, the reactivity of biotin with external and vesicle-entrapped BODIPY-labeled streptavidin was measured. The T domain was found to insert with roughly 70-80% of the molecules in the physiologically relevant orientation. In this orientation, residue 349, located in the loop between hydrophobic helices 8 and 9, was exposed to the trans side of the bilayer, while other solution-exposed residues along the hydrophobic helices 5-9 region of the T domain located near the cis surface. A protocol developed to detect the movement of residues back and forth across the membranes demonstrated that T domain sequences did not rapidly equilibrate between the cis and the trans sides of the bilayer. Binding streptavidin to biotinylated residues prior to membrane insertion only inhibited T domain pore formation for residues in the loop between helices 8 and 9. Pore formation experiments used an approach avoiding interference from transient membrane defects/leakage that may occur upon the initial insertion of protein. Combined, these results indicate that at low pH hydrophobic helices 8 and 9 form a transmembrane hairpin, while hydrophobic helices 5-7 form a nonclassical deeply inserted nontransmembraneous state. We propose that this represents a novel pre-translocation state that is distinct from a previously defined post-translocation state.     

TAPAS-1, a novel microdomain within the unique N-terminal region of the PDE4A1 cAMP-specific phosphodiesterase that allows rapid, Ca2+-triggered membrane association with selectivity for interaction with phosphatidic acid

Here we identify an 11-residue helical module in the unique N-terminal region of the cyclic AMP-specific phosphodiesterase PDE4A1 that determines association with phospholipid bilayers and shows a profound selectivity for interaction with phosphatidic acid (PA). This module contains a core bilayer insertion unit that is formed by two tryptophan residues, Trp(19) and Trp(20), whose orientation is optimized for bilayer insertion by the Leu(16):Val(17) pairing. Ca(2+), at submicromolar levels, interacts with Asp(21) in this module and serves to gate bilayer insertion, which is completed within 10 ms. Selectivity for interaction with PA is suggested to be achieved primarily through the formation of a charge network of the form (Asp(21-):Ca(2+):PA(2-):Lys(24+)) with overall neutrality at the bilayer surface. This novel phospholipid-binding domain, which we call TAPAS-1 (tryptophan anchoring phosphatidic acid selective-binding domain 1), is here identified as being responsible for membrane association of the PDE4A1 cAMP-specific phosphodiesterase. TAPAS-1 may not only serve as a paradigm for other PA-binding domains but also aid in detecting related phospholipid-binding domains and in generating simple chimeras for conferring membrane association and intracellular targeting on defined proteins.     

Structural insights into the membrane-anchoring mechanism of a cholesterol-dependent cytolysin

Perfringolysin O (PFO), a cytolytic toxin secreted by pathogenic Clostridium perfringens, forms large pores in cholesterol-containing membranes. Domain 4 (D4) of the protein interacts first with the membrane and is responsible for cholesterol recognition. By using several independent fluorescence techniques, we have determined the topography of D4 in the membrane-inserted oligomeric form of the toxin. Only the short hydrophobic loops at the tip of the D4 beta-sandwich are exposed to the bilayer interior, whereas the remainder of D4 projects from the membrane surface and is surrounded by water, making little or no contact with adjacent protein monomers in the oligomer. Thus, a limited interaction of D4 with the bilayer core seems to be sufficient to accomplish cholesterol recognition and initial binding of PFO to the membrane. Furthermore, D4 serves as the fulcrum around which extensive structural changes occur during the formation and insertion of the large transmembrane beta-barrel into the bilayer.     

A multidomain outer membrane protein from Pasteurella multocida: modelling and simulation studies of PmOmpA

PmOmpA is a two-domain outer membrane protein from Pasteurella multocida. The N-terminal domain of PmOmpA is a homologue of the transmembrane beta-barrel domain of OmpA from Escherichia coli, whilst the C-terminal domain of PmOmpA is a homologue of the extra-membrane Neisseria meningitidis RmpM C-terminal domain. This enables a model of a complete two domain PmOmpA to be constructed and its conformational dynamics explored via MD simulations of the protein embedded within two different phospholipid bilayers (DMPC and DMPE). The conformational stability of the transmembrane beta-barrel is similar to that of a homology model of OprF from Pseudomonas aeruginosa in bilayer simulations. There is a degree of water penetration into the interior of the beta-barrel, suggestive of a possible transmembrane pore. Although the PmOmpA model is stable over 20 ns simulations, retaining its secondary structure and fold integrity throughout, substantial flexibility is observed in a short linker region between the N- and the C-terminal domains. At low ionic strength, the C-terminal domain moves to interact electrostatically with the lipid bilayer headgroups. This study demonstrates that computational approaches may be applied to more complex, multi-domain outer membrane proteins, rather than just to transmembrane beta-barrels, opening the possibility of in silico proteomics approaches to such proteins.     

Interaction of Escherichia coli hemolysin with biological membranes. A study using cysteine scanning mutagenesis.

Escherichia coli hemolysin (HlyA) is a membrane-permeabilizing protein belonging to the family of RTX-toxins. Lytic activity depends on binding of Ca2(+) to the C-terminus of the molecule. The N-terminus of HlyA harbors hydrophobic sequences that are believed to constitute the membrane-inserting domain. In this study, 13 HlyA cysteine-replacement mutants were constructed and labeled with the polarity-sensitive fluorescent probe 6-bromoacetyl-2-dimethylaminonaphthalene (badan). The fluorescence emission of the label was examined in soluble and membrane-bound toxin. Binding effected a major blue shift in the emission of six residues within the N-terminal hydrophobic domain, indicating insertion of this domain into the lipid bilayer. The emission shifts occurred both in the presence and absence of Ca2(+), suggesting that Ca2(+) is not required for the toxin to enter membranes. However, binding of Ca2(+) to HlyA in solution effected conformational changes in both the C-terminal and N-terminal domain that paralleled activation. Our data indicate that binding of Ca2(+) to the toxin in solution effects a conformational change that is relayed to the N-terminal domain, rendering it capable of adopting the structure of a functional pore upon membrane binding.     

The staphylococcal alpha-toxin pore has a flexible conformation

The alpha-toxin from Staphylococcus aureus undergoes several conformational changes from the time it is released from the bacterium to the moment it forms a channel in the plasma membrane of its target cell. It is initially a soluble monomer, which undergoes membrane binding and oligomerization into a heptameric ring and finally inserts into the lipid bilayer to form a pore. Here we have analyzed the stability of different forms of the alpha-toxin (monomer as well as heptamers in solution, bound to the membrane and membrane-inserted) by differential scanning calorimetry and limited proteolysis. Data presented here show that, in contrast to both the membrane-bound prepore complex and the monomer in solution, the membrane-inserted alpha-toxin channel does not undergo cooperative unfolding and is highly susceptible to proteases. These observations suggest that the channel has a looser conformation. Interestingly, resistance to proteases could be recovered upon solubilization of the channel, indicating that the loss of rigid tertiary packing only occurred upon membrane insertion. Far-UV CD data, however, suggest that the transmembrane beta-barrel must be stably folded and that therefore only the Cap and Rim domains of the channel are loosely packed. All together, our data show that the alpha-toxin channel is not a rigid complex within the membrane but adopts a rather flexible conformation.     

Amyloid-β Membrane Binding and Permeabilization are Distinct Processes Influenced Separately by Membrane Charge and Fluidity

The 40 and 42 residue amyloid-β (Aβ) peptides are major components of the proteinaceous plaques prevalent in the Alzheimer's disease-afflicted brain and have been shown to have an important role in instigating neuronal degeneration. Whereas it was previously thought that Aβ becomes cytotoxic upon forming large fibrillar aggregates, recent studies suggest that soluble intermediate-sized oligomeric species cause cell death through membrane permeabilization. The present study examines the interactions between Aβ40 and lipid membranes using liposomes as a model system to determine how changes in membrane composition influence the conversion of Aβ into these toxic species. Aβ40 membrane binding was monitored using fluorescence-based assays with a tryptophan-substituted peptide (Aβ40 [Y10W]). We extend previous observations that Aβ40 interacts preferentially with negatively charged membranes, and show that binding of nonfibrillar, low molecular mass oligomers of Aβ40 to anionic, but not neutral, membranes involves insertion of the peptide into the bilayer, as well as sequential conformational changes corresponding to the degree of oligomerization induced. Significantly, while anionic membranes in the gel, liquid crystalline, and liquid ordered phases induce these conformational changes equally, membrane permeabilization is reduced dramatically as the fluidity of the membrane is decreased. These findings demonstrate that binding alone is not sufficient for membrane permeabilization, and that the latter is also highly dependent on the fluidity and phase of the membrane. We conclude that binding and pore formation are two distinct steps. The differences in Aβ behavior induced by membrane composition may have significant implications on the development and progression of AD as neuronal membrane composition is altered with age.     

Three-dimensional structures of the mammalian multidrug resistance P-glycoprotein demonstrate major conformational changes in the transmembrane domains upon nucleotide binding

P-glycoprotein is an ATP-binding cassette transporter that is associated with multidrug resistance and the failure of chemotherapy in human patients. We have previously shown, based on two-dimensional projection maps, that P-glycoprotein undergoes conformational changes upon binding of nucleotide to the intracellular nucleotide binding domains. Here we present the three-dimensional structures of P-glycoprotein in the presence and absence of nucleotide, at a resolution limit of approximately 2 nm, determined by electron crystallography of negatively stained crystals. The data reveal a major reorganization of the transmembrane domains throughout the entire depth of the membrane upon binding of nucleotide. In the absence of nucleotide, the two transmembrane domains form a single barrel 5-6 nm in diameter and about 5 nm deep with a central pore that is open to the extracellular surface and spans much of the membrane depth. Upon binding nucleotide, the transmembrane domains reorganize into three compact domains that are each 2-3 nm in diameter and 5-6 nm deep. This reorganization opens the central pore along its length in a manner that could allow access of hydrophobic drugs (transport substrates) directly from the lipid bilayer to the central pore of the transporter.     

pH dependent insertion of a diphtheria toxin B fragment peptide into the lipid membrane: a conformational analysis

A peptide of diphtheria toxin B fragment (residues 147-266) has been shown to induce pore formation in lipid bilayer membranes at low pH. Such an effect was obtained at a much lower extent or not at all at pH = 7. The region localized between residues 225 and 246 is highly hydrophobic (27.3% polarity) and characterized by a high concentration of proline residues. Since proline cis-trans isomerization is highly sensitive to the pH of the medium, we investigated the capability of the cis and trans isomers to penetrate into the lipid matrix. Obviously, the cis-trans isomerization of proline 242 and 245, assumed to be imposed by a low pH, uncovers the hydrophobic region and induces its insertion into a lipid layer of dipalmitoylphosphatidylcholine. The lipid matrix destabilization resulting from this process could promote the penetration into the lipid bilayer of an amphipatic structure (153-178) similar to the transverse lipid associating domains of membrane proteins.