The critical role of the constant region in thermal stability and aggregation of amyloidogenic immunoglobulin light chain

Light chain (LC) amyloidosis (AL) is a fatal disease in which immunoglobulin LC deposit as fibrils. Although the LC amyloid-forming propensity is attributed primarily to the variable region, fibrils also contain full-length LC comprised of variable-joining (V(L)) and constant (C(L)) regions. To assess the role of C(L) in fibrillogenesis, we compared the thermal stability of full-length LC and corresponding V(L) and C(L) fragments. Protein unfolding and aggregation were monitored by circular dichroism and light scattering. A full-length λ6 LC purified from urine of a patient with AL amyloidosis showed irreversible unfolding coupled to aggregation. The transition temperature decreased at slower heating rates, indicating kinetic effects. Next, we studied five recombinant λ6 proteins: full-length amyloidogenic LC, its V(L), germline LC, germline V(L), and C(L). Amyloidogenic and germline proteins showed similar rank order of stability, V(L) < LC < C(L); hence, in the full-length LC, V(L) destabilizes C(L). Amyloidogenic proteins were less stable than their germline counterparts, suggesting that reduction in V(L) stability destabilizes the full-length LC. Thermal unfolding of the full-length amyloidogenic and germline LC required high activation energy and involved irreversible aggregation, yet the unfolding of the isolated V(L) and C(L) fragments was partially reversible. Therefore, compared to their fragments, full-length LCs are more likely to initiate aggregation during unfolding and provide a template for the V(L) deposition. The kinetic barrier for this aggregation is regulated by the stability of the V(L) region. This represents a paradigm shift in AL fibrillogenesis and suggests C(L) region as a potential therapeutic target.     

Pharmacological stabilization of the native state of full-length immunoglobulin light chains to treat light chain amyloidosis

Immunoglobulin light chain amyloidosis (AL) is a cancer of plasma cells that secrete unstable full-length immunoglobulin light chains. These light chains misfold and aggregate, often with aberrant endoproteolysis, leading to organ toxicity. AL is currently treated by pharmacological elimination of the clonal plasma cells. Since it remains difficult to completely kill these cells in the majority of patients, we seek a complementary drug that inhibits light chain aggregation, which should diminish organ toxicity. We discovered a small-molecule binding site on full-length immunoglobulin light chains by structurally characterizing hit stabilizers emerging from a high-throughput screen seeking small molecules that protect full-length light chains from conformational excursion-linked endoproteolysis. The x-ray crystallographic characterization of 7 structurally distinct hit native-state stabilizers provided a structure-based blueprint, reviewed herein, to design more potent stabilizers. This approach enabled us to transform hits with micromolar affinity into stabilizers with nanomolar dissociation constants that potently prevent light chain aggregation.     

Structural and biochemical studies on the regulation of biotin carboxylase by substrate inhibition and dimerization

Biotin carboxylase (BC) activity is shared among biotin-dependent carboxylases and catalyzes the Mg-ATP-dependent carboxylation of biotin using bicarbonate as the CO₂ donor. BC has been studied extensively over the years by structural, kinetic, and mutagenesis analyses. Here we report three new crystal structures of Escherichia coli BC at up to 1.9 Å resolution, complexed with different ligands. Two structures are wild-type BC in complex with two ADP molecules and two Ca²⁺ ions or two ADP molecules and one Mg²⁺ ion. One ADP molecule is in the position normally taken by the ATP substrate, whereas the other ADP molecule occupies the binding sites of bicarbonate and biotin. One Ca²⁺ ion and the Mg²⁺ ion are associated with the ADP molecule in the active site, and the other Ca²⁺ ion is coordinated by Glu-87, Glu-288, and Asn-290. Our kinetic studies confirm that ATP shows substrate inhibition and that this inhibition is competitive against bicarbonate. The third structure is on the R16E mutant in complex with bicarbonate and Mg-ADP. Arg-16 is located near the dimer interface. The R16E mutant has only a 2-fold loss in catalytic activity compared with the wild-type enzyme. Analytical ultracentrifugation experiments showed that the mutation significantly destabilized the dimer, although the presence of substrates can induce dimer formation. The binding modes of bicarbonate and Mg-ADP are essentially the same as those to the wild-type enzyme. However, the mutation greatly disrupted the dimer interface and caused a large re-organization of the dimer. The structures of these new complexes have implications for the catalysis by BC.     

Biochemical and mutational analysis of EcoRII functional domains reveals evolutionary links between restriction enzymes

The archetypal Type IIE restriction endonuclease EcoRII is a dimer that has a modular structure. DNA binding studies indicate that the isolated C-terminal domain dimer has an interface that binds a single cognate DNA molecule whereas the N-terminal domain is a monomer that also binds a single copy of cognate DNA. Hence, the full-length EcoRII contains three putative DNA binding interfaces: one at the C-terminal domain dimer and two at each of the N-terminal domains. Mutational analysis indicates that the C-terminal domain shares conserved active site architecture and DNA binding elements with the tetrameric restriction enzyme NgoMIV. Data provided here suggest possible evolutionary relationships between different subfamilies of restriction enzymes.     

Molecular dynamics simulation of single-walled carbon nanotubes inside liquid crystals

Molecular dynamic simulations of systems of single-walled carbon nanotubes (CNTs) in liquid crystalline solvents were performed, in order to investigate the effect of the molecular structure and phase of the liquid crystal (LC) on the interactions between the CNTs. Three different LC molecules (5CB, 8CB and 5CF) were considered in our study. Our results with 5CB and 8CB suggest that increasing the chain length of the hydrophobic part of the LC molecule by three carbon atoms is insufficient to decrease the tendency for the CNTs to aggregate in the LCs. Additionally, varying the phase of the LC is also insufficient to decrease the aggregation tendency of the CNTs. However, simulations with 5CF (which has fluorine atoms in the head group of the LC molecule) suggest that this LC solvent can decrease the tendency of the CNTs to aggregate. This study is relevant to assist experimentalists with the development of high-quality dispersions of large concentrations of CNTs in the LCs.     

Structural Basis of Lipid Binding for the Membrane-embedded Tetraacyldisaccharide-1-phosphate 4′-Kinase LpxK

The membrane-bound tetraacyldisaccharide-1-phosphate 4′-kinase, LpxK, catalyzes the sixth step of the lipid A (Raetz) biosynthetic pathway and is a viable antibiotic target against emerging Gram-negative pathogens. We report the crystal structure of lipid IV_A, the LpxK product, bound to the enzyme, providing a rare glimpse into interfacial catalysis and the surface scanning strategy by which many poorly understood lipid modification enzymes operate. Unlike the few previously structurally characterized proteins that bind lipid A or its precursors, LpxK binds almost exclusively to the glucosamine/phosphate moieties of the lipid molecule. Steady-state kinetic analysis of multiple point mutants of the lipid-binding pocket pinpoints critical residues involved in substrate binding, and characterization of N-terminal helix truncation mutants uncovers the role of this substructure as a hydrophobic membrane anchor. These studies make critical contributions to the limited knowledge surrounding membrane-bound enzymes that act upon lipid substrates and provide a structural template for designing small molecule inhibitors targeting this essential kinase.     

GluR2 ligand-binding core complexes: importance of the isoxazolol moiety and 5-substituent for the binding mode of AMPA-type agonists

X-ray structures of the GluR2 ligand-binding core in complex with (S)-Des-Me-AMPA and in the presence and absence of zinc ions have been determined. (S)-Des-Me-AMPA, which is devoid of a substituent in the 5-position of the isoxazolol ring, only has limited interactions with the partly hydrophobic pocket of the ligand-binding site, and adopts an AMPA-like binding mode. The structures, in comparison with other agonist complex structures, disclose the relative importance of the isoxazolol ring and of the substituent in the 5-position for the mode of binding. A relationship appears to exist between the extent of interaction of the ligand with the hydrophobic pocket and the affinity of the ligand.     

Structure-based mutational analysis of the active site residues of -hydantoinase

We previously proposed the hydrophobic and bulky residues of the three loops, designated stereochemistry gate loops (SGLs), to constitute a hydrophobic substrate binding pocket of -hydantoinase from Bacillus stearothermophilus SD1. Simulation of substrate binding in the active site of -hydantoinase and sequence alignment of various -hydantoinases revealed the critical hydrophobic residues closely located around the exocyclic substituent of substrate. To evaluate the roles of these residues in substrate binding pocket, site-directed mutagenesis was performed specifically for Leu 65, Tyr 155, and Phe 159. When Tyr 155 was mutated to Phe and Glu, both mutants Y155F and Y155E were totally inactive for nonsubstituted hydantoin and -5-hydroxyphenyl hydantoin (HPH), which indicates that Tyr 155 is involved in substrate binding via a hydrogen bond with the hydantoinic ring. Furthermore, replacement of the hydrophobic residues Leu 65 and Phe 159 with Glu, a charged amino acid, resulted in a significant decrease in activity for nonsubstituted hydantoin, but not for HPH. The K_cat values of both mutants for nonsubstituted hydantoin also severely decreased, but a slight change in the K_cat values was observed towards HPH. These results suggest that the hydrophobic residues in SGLs play an essential role in substrate binding, and differentially interact according to the property of the exocyclic substituent.     

Crystal structures of amylosucrase from Neisseria polysaccharea in complex with D-glucose and the active site mutant Glu328Gln in complex with the natural substrate sucrose

The structure of amylosucrase from Neisseria polysaccharea in complex with beta-D-glucose has been determined by X-ray crystallography at a resolution of 1.66 A. Additionally, the structure of the inactive active site mutant Glu328Gln in complex with sucrose has been determined to a resolution of 2.0 A. The D-glucose complex shows two well-defined D-glucose molecules, one that binds very strongly in the bottom of a pocket that contains the proposed catalytic residues (at the subsite -1), in a nonstrained (4)C(1) conformation, and one that binds in the packing interface to a symmetry-related molecule. A third weaker D-glucose-binding site is located at the surface near the active site pocket entrance. The orientation of the D-glucose in the active site emphasizes the Glu328 role as the general acid/base. The binary sucrose complex shows one molecule bound in the active site, where the glucosyl moiety is located at the alpha-amylase -1 position and the fructosyl ring occupies subsite +1. Sucrose effectively blocks the only visible access channel to the active site. From analysis of the complex it appears that sucrose binding is primarily obtained through enzyme interactions with the glucosyl ring and that an important part of the enzyme function is a precise alignment of a lone pair of the linking O1 oxygen for hydrogen bond interaction with Glu328. The sucrose specificity appears to be determined primarily by residues Asp144, Asp394, Arg446, and Arg509. Both Asp394 and Arg446 are located in an insert connecting beta-strand 7 and alpha-helix 7 that is much longer in amylosucrase compared to other enzymes from the alpha-amylase family (family 13 of the glycoside hydrolases).     

Intertwined dimeric structure for the SH3 domain of the c-Src tyrosine kinase induced by polyethylene glycol binding

Here we report the first crystal structure of the SH3 domain of the cellular Src tyrosine kinase (c-Src-SH3) domain on its own. In the crystal two molecules of c-Src-SH3 exchange their -RT loops generating an intertwined dimer, in which the two SH3 units, preserving the binding site configuration, are oriented to allow simultaneous binding of two ligand molecules. The dimerization of c-Src-SH3 is induced, both in the crystal and in solution, by the binding of a PEG molecule at the dimer interface, indicating that this type of conformations are energetically close to the native structure. These results have important implications respect to in vivo oligomerization and amyloid aggregation.     

Enzymatic and structural analysis of inhibitors designed against Mycobacterium tuberculosis thymidylate kinase. New insights into the phosphoryl transfer mechanism

The chemical synthesis of new compounds designed as inhibitors of Mycobacterium tuberculosis TMP kinase (TMPK) is reported. The synthesis concerns TMP analogues modified at the 5-position of the thymine ring as well as a novel compound with a six-membered sugar ring. The binding properties of the analogues are compared with the known inhibitor azido-TMP, which is postulated here to work by excluding the TMP-bound Mg(2+) ion. The crystallographic structure of the complex of one of the compounds, 5-CH(2)OH-dUMP, with TMPK has been determined at 2.0 A. It reveals a major conformation for the hydroxyl group in contact with a water molecule and a minor conformation pointing toward Ser(99). Looking for a role for Ser(99), we have identified an unusual catalytic triad, or a proton wire, made of strictly conserved residues (including Glu(6), Ser(99), Arg(95), and Asp(9)) that probably serves to protonate the transferred PO(3) group. The crystallographic structure of the commercially available bisubstrate analogue P(1)-(adenosine-5')-P(5)-(thymidine-5')-pentaphosphate bound to TMPK is also reported at 2.45 A and reveals an alternative binding pocket for the adenine moiety of the molecule compared with what is observed either in the Escherichia coli or in the yeast enzyme structures. This alternative binding pocket opens a way for the design of a new family of specific inhibitors.     

Rational Design of Small-Molecule Stabilizers of Spermine Synthase Dimer by Virtual Screening and Free Energy-Based Approach

Snyder-Robinson Syndrome (SRS) is a rare mental retardation disorder which is caused by the malfunctioning of an enzyme, the spermine synthase (SMS), which functions as a homo-dimer. The malfunctioning of SMS in SRS patients is associated with several identified missense mutations that occur away from the active site. This investigation deals with a particular SRS-causing mutation, the G56S mutation, which was shown computationally and experimentally to destabilize the SMS homo-dimer and thus to abolish SMS enzymatic activity. As a proof-of-concept, we explore the possibility to restore the enzymatic activity of the malfunctioning SMS mutant G56S by stabilizing the dimer through small molecule binding at the mutant homo-dimer interface. For this purpose, we designed an in silico protocol that couples virtual screening and a free binding energy-based approach to identify potential small-molecule binders on the destabilized G56S dimer, with the goal to stabilize it and thus to increase SMS G56S mutant activity. The protocol resulted in extensive list of plausible stabilizers, among which we selected and tested 51 compounds experimentally for their capability to increase SMS G56S mutant enzymatic activity. In silico analysis of the experimentally identified stabilizers suggested five distinctive chemical scaffolds. This investigation suggests that druggable pockets exist in the vicinity of the mutation sites at protein-protein interfaces which can be used to alter the disease-causing effects by small molecule binding. The identified chemical scaffolds are drug-like and can serve as original starting points for development of lead molecules to further rescue the disease-causing effects of the Snyder-Robinson syndrome for which no efficient treatment exists up to now.     

Differences in dynamic structure of LC8 monomer, dimer, and dimer-peptide complexes

Dimerization of dynein light chain LC8 creates two symmetric grooves at the dimer interface with diverse binding capabilities. In addition to pH and protein concentration, dimerization is affected by phosphorylation, as illustrated by a phosphomimetic mutation that promotes dissociation of LC8 to a monomer and subsequent dissociation from the dynein complex in vitro. In this work we characterize the dynamic structure and unfolding profiles of an LC8 mutant, H55K, as a model for monomeric LC8 at neutral pH. Backbone (15)N relaxation experiments show that the monomer, while primarily ordered, has more heterogeneous dynamics relative to the LC8 dimer, predominantly in residues that ultimately form the binding groove, particularly those in beta 1 and beta 3 strands. This heterogeneity suggests that conformations that are primed for binding are sampled in the inactive monomer and favored in the active dimer. Further changes of LC8 backbone dynamics upon binding to short peptides from Swallow (Swa) and dynein intermediate chain (IC) were elucidated. The conformational heterogeneity apparent in the LC8 dimer is retained in LC8/IC but is lost in LC8/Swa, suggesting that the degree of ordering upon binding is ligand dependent. The reduced complexity of motion in LC8/Swa correlates with the less favorable entropy of binding of LC8 to Swa relative to IC. We propose that the conformational motility of beta 3 has functional significance in dimerization and in ligand binding. In the latter, beta 3 flexibility apparently accommodates different binding modes for different ligands resulting in ligand-specific conformational dynamics of the binding site that may impact other processes such as accessibility to phosphorylation.     

Synthetic site-directed ligands

Complexes of nucleotides, peptides and aromatic hapten-like compounds with immunoglobulin fragments were studied by X-ray analysis. After tri- or hexanucleotides of deoxythymidylate were diffused into triclinic crystals of a Fab (BV04-01) with specificity for single-stranded DNA, extensive changes were detected throughout the structure of the protein. The Fab co-crystallized with a tri- or pentanucleotide in a different space group (monoclinic), an observation sometimes correlated with alterations in the structure of the 'native' protein. Structural analyses of the co-crystals are in progress for direct comparisons with the unliganded Fab. In crystals of a human (Mcg) Bence-Jones dimer, synthetic opioid peptides, chemotactic peptides or dinitrophenyl (DNP) derivatives could be diffused into a large conical binding cavity. The conformations of both the ligand and the protein were usually altered during the binding process. At the base of the cavity tyrosine residues could be displaced like trap-doors to permit entry of some opioid peptides and DNP compounds into a deep binding pocket. In co-crystals of the dimer and bis(DNP)lysine, two ligand molecules were bound in tandem, one in the main cavity and the second in the deep pocket. One ligand adopted an extended conformation, with the epsilon-DNP ring near the floor of the main cavity and the alpha-DNP group in solvent outside the binding site. There were no significant conformational changes in the protein. In contrast, the second ligand was very compact, with DNP rings immersed in the deep pocket, and the binding site was expanded to accommodate the oversized ligand. Peptides designed to be specific for the main cavity were incrementally constructed from minimal binding units by M. Geysen, G. Trippick, S. Rodda and their colleagues. A pentapeptide optimized for binding by this method was diffused into a crystal of the dimer and found by Fourier difference analysis to lodge exclusively in the main cavity as predicted. Binding regions in the BV04-01 Fab and the Mcg dimer were markedly different in size and shape. The Fab had a groove-type site, in which a layer of sidechains acted like a false floor over regions analogous to the cavity and deep pocket of the Bence-Jones dimer.     

Structure and dynamics of LC8 complexes with KXTQT-motif peptides: swallow and dynein intermediate chain compete for a common site

The dynein light chain LC8 is an integral subunit of the cytoplasmic dynein motor complex that binds directly to and promotes assembly of the dynein intermediate chain (IC). LC8 interacts also with a variety of putative dynein cargo molecules such as Bim, a proapoptotic Bcl2 family protein, which have the KXTQT recognition sequence and neuronal nitric oxide synthase (nNOS), which has the GIQVD fingerprint but shares the same binding grooves at the LC8 dimer interface. The work reported here investigates the interaction of LC8 with IC and a putative cargo, Swallow, which share the KXTQT recognition sequence, and addresses the apparent paradox of how LC8, as part of dynein, mediates binding to cargo. The structures of Drosophila LC8 bound to peptides from IC and Swallow solved by X-ray diffraction show that the IC and Swallow peptides bind in the same grooves at the dimer interface. Differences in flexibility between bound and free LC8 were evaluated from hydrogen isotope exchange experiments using heteronuclear NMR spectroscopy. Peptide binding causes an increase in protection from exchange primarily in residues that interact directly with the peptide, such as the beta-strand intertwined at the interface and the N-terminal end of helix alpha2. There is considerably more protection upon Swallow binding, consistent with tighter binding relative to IC. Comparison with the LC8/nNOS complex shows how both the GIQVD and KXTQT fingerprints are recognized in the same groove. The similar structures of LC8/IC and LC8/Swa and the tighter binding of Swallow call into question the role for LC8 as a cargo adaptor protein, and suggest that binding of LC8 to Swallow serves another function, possibly that of a dimerization engine, which is independent of its role in dynein.     

Three-dimensional structure of transketolase, a thiamine diphosphate dependent enzyme, at 2.5 A resolution.

The crystal structure of Saccharomyces cerevisiae transketolase, a thiamine diphosphate dependent enzyme, has been determined to 2.5 A resolution. The enzyme is a dimer with the active sites located at the interface between the two identical subunits. The cofactor, vitamin B1 derived thiamine diphosphate, is bound at the interface between the two subunits. The enzyme subunit is built up of three domains of the alpha/beta type. The diphosphate moiety of thiamine diphosphate is bound to the enzyme at the carboxyl end of the parallel beta-sheet of the N-terminal domain and interacts with the protein through a Ca2+ ion. The thiazolium ring interacts with residues from both subunits, whereas the pyrimidine ring is buried in a hydrophobic pocket of the enzyme, formed by the loops at the carboxyl end of the beta-sheet in the middle domain in the second subunit. The structure analysis identifies amino acids critical for cofactor binding and provides mechanistic insights into thiamine catalysis.     

Free light chain content in culture media reflects recombinant monoclonal antibody productivity and quality

Monoclonal antibodies (mAbs) are currently the dominant class of biopharmaceuticals. Due to the high dosage requirements of most mAb therapeutics, high productivity and low aggregation are prevailing criteria during cell line generation and process development. Given that light chains (LCs) play an important role in antibody folding and assembly, and that most mAb producing cell lines also manufacture free LCs, we sought to investigate whether there was a relationship between free LC levels in cell culture media and mAb productivity/quality. To this end, a series of analytical methods were developed in order to quantify free LC content in cell culture media and assess mAb productivity and aggregation levels. Afterwards, conditioned media samples from different cell lines at identical culturing conditions and a single clone under varying culturing conditions were analyzed. Higher LC expression was found to correlate with higher cell viability, higher mAb productivity, and lower aggregation. While LC expression cannot yet be definitively considered the root cause of these phenomena, these results are consistent with the role of LCs in mAb production, suggesting that free LC expression levels may potentially serve as a parameter for cell line generation and cell culture process optimization. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1131–1139, 2013     

Enzyme inhibition by allosteric capture of an inactive conformation

All members of the human herpesvirus protease (HHV Pr) family are active as weakly associating dimers but inactive as monomers. A small-molecule allosteric inhibitor of Kaposi's sarcoma-associated herpesvirus protease (KSHV Pr) traps the enzyme in an inactive monomeric state where the C-terminal helices are unfolded and the hydrophobic dimer interface is exposed. NMR titration studies demonstrate that the inhibitor binds to KSHV Pr monomers with low micromolar affinity. A 2.0-Å-resolution X-ray crystal structure of a C-terminal truncated KSHV Pr-inhibitor complex locates the binding pocket at the dimer interface and displays significant conformational perturbations at the active site, 15 Å from the allosteric site. NMR and CD data suggest that the small molecule inhibits human cytomegalovirus protease via a similar mechanism. As all HHV Prs are functionally and structurally homologous, the inhibitor represents a class of compounds that may be developed into broad-spectrum therapeutics that allosterically regulate enzymatic activity by disrupting protein-protein interactions.     

Docking and molecular dynamics studies on triclosan derivatives binding to FabI

FabI, enoyl-ACP reductase (ENR), is the rate-limiting enzyme in the last step for fatty acids biosynthesis in many bacteria. Triclosan (TCL) is a commercial bactericide, and as a FabI inhibitor, it can depress the substrate (trans-2-enoyl-ACP) binding with FabI to hinder the fatty acid synthesis. The structure-activity relationship between TCL derivatives and FabI protein has already been acknowledged, however, their combination at the molecular level has never been investigated. This paper uses the computer-aided approaches, such as molecular docking, molecular dynamics simulation, and binding free energy calculation based on the molecular mechanics/Poisson-Bolzmann surface area (MM/PBSA) method to illustrate the interaction rules of TCL derivatives with FabI and guide the development of new derivatives. The consistent data of the experiment and corresponding activity demonstrates that electron-withdrawing groups on side chain are better than electron-donating groups. 2-Hydroxyl group on A ring, promoting the formation of hydrogen bond, is vital for bactericidal effect; and the substituents at 4-position of A ring, 2′-position and 4′-position of B ring benefit antibacterial activity due to forming a hydrogen bond or stabilizing the conformation of active pocket residues of receptor. While the substituents at 3′-position and 5′-position of B ring destroy the π-π stacking interaction of A ring and NAD⁺ which depresses the antibacterial activity. This study provides a new sight for designing novel TCL derivatives with superior antibacterial activity.     

The High-Risk HPV16 E7 Oncoprotein Mediates Interaction between the Transcriptional Coactivator CBP and the Retinoblastoma Protein pRb

The oncoprotein E7 from human papillomavirus (HPV) strains that confer high cancer risk mediates cell transformation by deregulating host cellular processes and activating viral gene expression through recruitment of cellular proteins such as the retinoblastoma protein (pRb) and the cyclic-AMP response element binding binding protein (CBP) and its paralog p300. Here we show that the intrinsically disordered N-terminal region of E7 from high-risk HPV16 binds the TAZ2 domain of CBP with greater affinity than E7 from low-risk HPV6b. HPV E7 and the tumor suppressor p53 compete for binding to TAZ2. The TAZ2 binding site in E7 overlaps the LxCxE motif that is crucial for interaction with pRb. While TAZ2 and pRb compete for binding to a monomeric E7 polypeptide, the full-length E7 dimer mediates an interaction between TAZ2 and pRb by promoting formation of a ternary complex. Cell-based assays show that expression of full-length HPV16 E7 promotes increased pRb acetylation and that this response depends both on the presence of CBP/p300 and on the ability of E7 to form a dimer. These observations suggest a model for the oncogenic effect of high-risk HPV16 E7. The disordered region of one E7 molecule in the homodimer interacts with the pocket domain of pRb, while the same region of the other E7 molecule binds the TAZ2 domain of CBP/p300. Through its ability to dimerize, E7 recruits CBP/p300 and pRb into a ternary complex, bringing the histone acetyltransferase domain of CBP/p300 into proximity to pRb and promoting acetylation, leading to disruption of cell cycle control.