Poly(vinylpyrrolidone) for bioconjugation and surface ligand immobilization

Poly(vinylpyrrolidone) (PVP), a nonionic and nontoxic polymer with antifouling properties, has been synthesized via RAFT polymerization to obtain thiol-terminated PVP. We demonstrate that when the polymer is adsorbed onto the surface of colloidal silica particles, the terminal thiol groups of PVP remain accessible for chemical modification and lend themselves to the immobilization of ligands. We show that ligand attachment onto the surface via conjugation to PVP is reversible, as the polymer can be desorbed from the surface for conjugate and surface recovery. We present the conjugation of a model peptide and an oligonucleotide to PVP via the polymer terminal thiol and demonstrate that conjugates remain functional in molecular recognition assay. The developed technique offers a novel method to functionalize low-fouling surfaces for a variety of biomedical applications and presents opportunities to use PVP as a macromolecular drug carrier.     

Current state and prospects of the phytosynthesized colloidal gold nanoparticles and their applications in cancer theranostics

The design, development, and biomedical applications of phytochemical-based green synthesis of biocompatible colloidal gold nanoparticles (AuNPs) are becoming an emerging field due to several advantages (safer, eco-friendly, simple, fast, energy efficient, low-cost, and less toxic) over conventional chemical synthetic procedures. Biosynthesized colloidal gold nanoparticles are remarkably attractive in several biomedical applications including cancer theranostics due to small size, unusual physico-chemical properties, facile surface modification, high biocompatibility, and numerous other advantages. Of late, several researchers have investigated the biosynthesis and prospective applications (diagnostics, imaging, drug delivery, and cancer therapeutics) of AuNPs in health care and medicine. However, not a single review article is available in the literature that demonstrates the anti-cancer potential of biosynthesized colloidal AuNPs with detailed mechanistic study. In the present review article, we for the first time discuss the biointerface of colloidal AuNPs, plants, and cancer mainly (i) comprehensive mechanistic aspects of phytochemical-based synthesis of AuNPs; (ii) proposed anti-cancer mechanisms along with biomedical applications in diagnostics, imaging, and drug delivery; and (iii) key challenges for biogenic AuNPs as future cancer nanomedicine.

     

A new route for chitosan immobilization onto polyethylene surface

Low-density polyethylene (LDPE) belongs to commodity polymer materials applied in biomedical applications due to its favorable mechanical and chemical properties. The main disadvantage of LDPE in biomedical applications is low resistance to bacterial infections. An antibacterial modification of LDPE appears to be a solution to this problem. In this paper, the chitosan and chitosan/pectin multilayer was immobilized via polyacrylic acid (PAA) brushes grafted on the LDPE surface. The grafting was initiated by a low-temperature plasma treatment of the LDPE surface. Surface and adhesive properties of the samples prepared were investigated by surface analysis techniques. An antibacterial effect was confirmed by inhibition zone measurements of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The chitosan treatment of LDPE led to the highest and most clear inhibition zones (35mm(2) for E. coli and 275mm(2) for S. aureus).     

A Colloidal Singularity Reveals the Crucial Role of Colloidal Stability for Nanomaterials In-Vitro Toxicity Testing: nZVI-Microalgae Colloidal System as a Case Study

Aggregation raises attention in Nanotoxicology due to its methodological implications. Aggregation is a physical symptom of a more general physicochemical condition of colloidal particles, namely, colloidal stability. Colloidal stability is a global indicator of the tendency of a system to reduce its net surface energy, which may be achieved by homo-aggregation or hetero-aggregation, including location at bio-interfaces. However, the role of colloidal stability as a driver of ENM bioactivity has received little consideration thus far. In the present work, which focuses on the toxicity of nanoscaled Fe° nanoparticles (nZVI) towards a model microalga, we demonstrate that colloidal stability is a fundamental driver of ENM bioactivity, comprehensively accounting for otherwise inexplicable differential biological effects. The present work throws light on basic aspects of Nanotoxicology, and reveals a key factor which may reconcile contradictory results on the influence of aggregation in bioactivity of ENMs.     

Gold Nanostar Synthesis with a Silver Seed Mediated Growth Method

The physical, chemical and optical properties of nano-scale colloids depend on their material composition, size and shape ^1-5. There is a great interest in using nano-colloids for photo-thermal ablation, drug delivery and many other biomedical applications ⁶. Gold is particularly used because of its low toxicity ^7-9. A property of metal nano-colloids is that they can have a strong surface plasmon resonance ¹⁰. The peak of the surface plasmon resonance mode depends on the structure and composition of the metal nano-colloids. Since the surface plasmon resonance mode is stimulated with light there is a need to have the peak absorbance in the near infrared where biological tissue transmissivity is maximal ^{11, 12}.We present a method to synthesize star shaped colloidal gold, also known as star shaped nanoparticles ^13-15 or nanostars ¹⁶. This method is based on a solution containing silver seeds that are used as the nucleating agent for anisotropic growth of gold colloids ^17-22. Scanning electron microscopy (SEM) analysis of the resulting gold colloid showed that 70 % of the nanostructures were nanostars. The other 30 % of the particles were amorphous clusters of decahedra and rhomboids. The absorbance peak of the nanostars was detected to be in the near infrared (840 nm). Thus, our method produces gold nanostars suitable for biomedical applications, particularly for photo-thermal ablation.     

Review: the potential impact of surface crystalline states of titanium for biomedical applications

In many biomedical applications, titanium forms an interface with tissues, which is crucial to ensure its long-term stability and safety. In order to exert control over this process, titanium implants have been treated with various methods that induce physicochemical changes at nano and microscales. In the past 20?years, most of the studies have been conducted to see the effect of topographical and physicochemical changes of titanium surface after surface treatments on cells behavior and bacteria adhesion. In this review, we will first briefly present some of these surface treatments either chemical or physical and we explain the biological responses to titanium with a specific focus on adverse immune reactions. More recently, a new trend has emerged in titanium surface science with a focus on the crystalline phase of titanium dioxide and the associated biological responses. In these recent studies, rutile and anatase are the major two polymorphs used for biomedical applications. In the second part of this review, we consider this emerging topic of the control of the crystalline phase of titanium and discuss its potential biological impacts. More in-depth analysis of treatment-related surface crystalline changes can significantly improve the control over titanium/host tissue interface and can result in considerable decreases in implant-related complications, which is currently a big burden on the healthcare system.     

Analysis of colloidal gold probes by isoelectric focusing in agarose gels

Colloidal gold particles of different size (3-20 nm in diameter) were prepared by tannic acid-citrate and citrate reduction methods. From these colloids, different probes were prepared using sheep anti-rabbit antiserum, sheep anti-rabbit IgG, bovine serum albumin, polyethylene glycol, and protein A as the primary stabilizers and polyethylene glycol and/or bovine serum albumin as secondary and tertiary stabilizers, in different combinations. The probes were analyzed by isoelectric focusing in agarose gels, which allow the migration of particles in the size range 3-20 nm. (P. Sewer and S. J. Hayes, 1986, Anal. Biochem. 158, 72-78). Isoelectric focusing revealed that the surface charge of colloidal gold probes is dependent upon the size of the gold particle, the reduction method used, the primary ligand, and the pH at which this is adsorbed, as well as upon the secondary and tertiary stabilizers used. It is proposed that such differences in surface charge may underlie the different results which may sometimes be observed in colloidal gold labeling, especially when novel ligands are used.     

A thixotropic hydrogel from chemically cross-linked guar gum: synthesis, characterization and rheological behaviour

Polysaccharide guar gum (GG) was cross-linked in an alkaline solution with polyethylene glycol diglycidyl ether (PEGDGE) to create a new hydrogel. The GG hydrogel was examined by FT-IR spectroscopy, AFM analysis and SEM analysis. The water uptake of the GG hydrogel was measured at different pHs, and rheological studies were performed to verify the thixotropic nature of the material. Rheological studies revealed the pseudoplastic behaviour of the GG hydrogel and its thixotropic nature. AFM analysis on a sample which was subjected to shear stress showed the presence of nanoparticles in the hydrogel. When the sample was left to settle, the gel surface returned to its original homogenous morphology. The thixotropic and injectable nature of the GG hydrogel suggest its possible use in biomedical applications.     

Nanodiamonds for bioapplications–specific targeting strategies

BackgroundNanodiamonds (NDs) provide a unique multitasking system for drug delivery and fluorescent imaging in biological environments. Owing to their quantum properties, NDs are expected to be employed as multifunctional probes in the future for the accurate visualization of biophysical parameters such as temperature and magnetic fields. However, the use of NDs for the selective targeting of the biomolecules of interest within a complicated biological system remains a challenge. One of the most promising solutions is the appropriate surface design of NDs based on organic chemistry and biochemistry. The engineered NDs have high biocompatibility and dispersibility in a biological environment and hence undergo cellular uptake through specific pathways.Scope of reviewThis review focuses on the selective targeting of NDs for biomedical and biophysical applications from the viewpoint of ND surface functionalizations and modifications. These pretreatments make possible the specific targeting of biomolecules of interest on or in a cell by NDs via a designed biochemical route.Major conclusionsThe surface of NDs is covalently or noncovalently modified with silica, polymers, or biomolecules to reshape them, control their size, and enhance the colloidal stability and biomolecular selectivity toward the biomolecules of interest. Electroporation, chemical treatment, injection, or endocytosis are the methods generally adopted to introduce NDs into living cells. The pathway, efficiency, and the cell viability depend on the selected method.General significanceIn the biomedical field, the surface modification facilitates specific delivery of a drug, leading to a higher therapeutic efficacy. In biophysical applications, the surface modification paves the way for the accurate measurement of physical parameters to gain a better understanding of various cell functions.     

Endothelial Targeting of Cowpea Mosaic Virus (CPMV) via Surface Vimentin

Cowpea mosaic virus (CPMV) is a plant comovirus in the picornavirus superfamily, and is used for a wide variety of biomedical and material science applications. Although its replication is restricted to plants, CPMV binds to and enters mammalian cells, including endothelial cells and particularly tumor neovascular endothelium in vivo. This natural capacity has lead to the use of CPMV as a sensor for intravital imaging of vascular development. Binding of CPMV to endothelial cells occurs via interaction with a 54 kD cell-surface protein, but this protein has not previously been identified. Here we identify the CPMV binding protein as a cell-surface form of the intermediate filament vimentin. The CPMV-vimentin interaction was established using proteomic screens and confirmed by direct interaction of CPMV with purified vimentin, as well as inhibition in a vimentin-knockout cell line. Vimentin and CPMV were also co-localized in vascular endothelium of mouse and rat in vivo. Together these studies indicate that surface vimentin mediates binding and may lead to internalization of CPMV in vivo, establishing surface vimentin as an important vascular endothelial ligand for nanoparticle targeting to tumors. These results also establish vimentin as a ligand for picornaviruses in both the plant and animal kingdoms of life. Since bacterial pathogens and several other classes of viruses also bind to surface vimentin, these studies suggest a common role for surface vimentin in pathogen transmission.     

Fabrication of three-dimensional collagen scaffold using an inverse mould-leaching process

Natural biopolymers, such as collagen or chitosan, are considered ideal for biomedical scaffolds. However, low processability of the materials has hindered the fabrication of designed pore structures controlled by various solid freeform-fabrication methods. A new technique to fabricate a biomedical three-dimensional collagen scaffold, supplemented with a sacrificial poly(ethylene oxide) mould is proposed. The fabricated collagen scaffold shows a highly porous surface and a three-dimensional structure with high porosity as well as mechanically stable structure. To show its feasibility for biomedical applications, fibroblasts/keratinocytes were co-cultured on the scaffold, and the cell proliferation and cell migration of the scaffold was more favorable than that obtained with a spongy-type collagen scaffold.     

Preparation of poly(l-lactide) blends and biodegradation by Lentzea waywayandensis

As a biodegradable polyester, polylactide (PLA) has applications as a packaging material, in biomedical fields and tissue engineering. With the dual aim of improving its properties and biodegradability, PLA was blended with other polymers such as gum arabic, thermoplastic starch, microcrystalline cellulose, polyethylene glycol and polyhydroxy butyrate in 1:1 (w/w) by melt-blending technique. The thermal properties of the blends were compared with that of unblended PLA by thermo-gravimetric analysis. Biodegradation using Lentzea waywayandensis was in the order of PLA–gum arabic?>?PLA–thermoplastic starch?>?PLA(virgin)?>?PLA–microcrystalline cellulose?>?PLA–polyethylene glycol?>?PLA–polyhydroxy butyrate. Weight loss of 99?% (w/w) was noted within 4?days for PLA–thermoplastic starch and PLA-gum arabic blends.     

普鲁士蓝纳米粒子在生物医学诊断和治疗中的应用及进展

随着生物医学诊断和治疗的持续深入研究,出现了多种医学诊断和治疗新方法,为人类的健康提供了更大的保证,其中纳米生物技术在生物医学诊断和治疗中的应用日益增多,基于纳米技术,开发传统材料的生物医学新应用成为了人们的研究热点。普鲁士蓝是一种历史悠久的蓝色染料,其制备过程简单、绿色、成本低,化学结构稳定,具有优良的物理、化学、光学以及磁性等性能,已经在许多领域得到了广泛的应用。近年来,普鲁士蓝开始在生物医学诊断和治疗领域中崭露头角,它已经成功的被开发为新型的核磁共振造影剂和光声成像造影剂,并且在药物输送系统和光热治疗等领域也开始占有一席之地,开发基于纳米技术的普鲁士蓝的生物医学应用已经成为极具吸引力的研究方向。本文对普鲁士蓝在生物医学诊断和治疗中的应用及进展进行综述。     

Biodistribution and stability of CdSe core quantum dots in mouse digestive tract following per os administration: advantages of double polymer/silica coated nanocrystals

CdSe-core, ZnS-capped semiconductor quantum dots (QDs) are of great potential for biomedical applications. However, applications in the gastrointestinal tract for in vivo imaging and therapeutic purposes are hampered by their sensitivity to acidic environments and potential toxicity. Here we report the use of coatings with a combination of polythiol ligands and silica shell (QDs PolyT-APS) to stabilize QDs fluorescence under acidic conditions. We demonstrated the stability of water-soluble QDs PolyT-APS both in vitro, in strong acidic solutions, and in vivo. The biodistribution, stability and photoluminescence properties of QDs in the gastrointestinal tract of mice after per os administration were assessed. We demonstrated that QDs coated with current traditional materials - mercapto compounds (QDs MPA) and pendant thiol group (QDs PolyT) - are not capable of protecting QDs from chemically induced degradation and surface modification. Polythiol ligands and silica shell quantum dots (QDs PolyT-APS) are suitable for biological and biomedical applications in the gastrointestinal tract.     

Novel chitin and chitosan nanofibers in biomedical applications

Chitin and its deacetylated derivative, chitosan, are non-toxic, antibacterial, biodegradable and biocompatible biopolymers. Due to these properties, they are widely used for biomedical applications such as tissue engineering scaffolds, drug delivery, wound dressings, separation membranes and antibacterial coatings, stent coatings, and sensors. In the recent years, electrospinning has been found to be a novel technique to produce chitin and chitosan nanofibers. These nanofibers find novel applications in biomedical fields due to their high surface area and porosity. This article reviews the recent reports on the preparation, properties and biomedical applications of chitin and chitosan based nanofibers in detail.     

Biotinylation reagents for the study of cell surface proteins

The extraordinarily stable, non-covalent interaction between avidin and biotin is one of the most commonly exploited tools in chemistry and biology. Methods for derivatization with biotin of a variety of molecules (in particular, proteins) have been introduced, in order to allow their efficient recovery, immobilization and detection with avidin-based reagents. The field has evolved very rapidly and the applications have become more and more sophisticated. Cell surface protein studies have enormously benefited from refinements of this technology. It is now possible to specifically biotinylate one single membrane protein or to fish out a membrane receptor bound to its ligand. The release of biotinylated molecules from the avidin-based reagents, however, may still represent a major problem, due to the stability of the complex. This review will examine the biotin-avidin technology for the study of cell surface proteins, discussing reagents and techniques as well as examples of applications in quantitative proteomics.     

Cover Image,Volume 116, Number 7, July 2019

Viral vectors such as adenovirus have successful applications in vaccines and gene therapy but the manufacture of the high-quality virus remains a challenge. It is desirable to use the adsorption-based chromatographic separations that so effectively underpin the therapeutic protein manufacture. However fundamental differences in the size and stability of this class of product mean it is necessary to revisit the design of sorbent's morphology and surface chemistry. In this study, the behaviour of a cellulose nanofiber ion-exchange sorbent derivatised with quaternary amine ligands at defined densities is characterised to address this. This material was selected as it has a large accessible surface area for viral particles and rapid process times. Initially, the impact of surface chemistry on infective product recovery using low (440 µmol/g), medium (750 µmol/g), and high (1029 µmol/g) ligand densities is studied. At higher densities product stability is reduced, this effect increased with prolonged adsorption durations of 24 min with just ~10% loss at low ligand density versus ~50% at high. This could be mitigated by using a high flow rate to reduce the cycle time to ~1 min. Next, the impact of ligand density on the separation's resolution was evaluated. Key to understanding virus quality is the virus particle: infectious virus particle ratio. It was found this parameter could be manipulated using ligand density and elution strategy. Together this provides a basis for viral vector separations that allows for their typically low titres and labile nature by using high liquid velocity to minimise both load and on-column times while separating key product and process-related impurities.     

Preparation of Gold Nanoparticles and their Applications in Anisotropic Nanoparticle Synthesis and Bioimaging

In this review, we highlight our recent achievements in using colloidal gold nanoparticles as building blocks for fabrication of anisotropic and multicomponent nanoparticles (e.g., nanoshells, semiconductor nanocrystals, and gold nanorods). The tunable optical properties of these nanoparticles are well suited for various biomedical and biophotonic applications.     

Synthesis, conjugation, and radiolabeling of a novel bifunctional chelating agent for (225)Ac radioimmunotherapy applications

225Ac (t(1/2) = 10 days) is an alternative alpha-emitter that has been proposed for radioimmunotherapy (RIT) due to its many favorable properties, such as half-life and mode of decay. The factor limiting use of (225)Ac in RIT is the lack of an acceptably stable chelate for in vivo applications. Herein is described the first reported bifunctional chelate for (225)Ac that has been evaluated for stability for in vivo applications. The detailed synthesis of a bifunctional chelating agent 2-(4-isothiocyanatobenzyl)-1,4,7,10,13, 16-hexaazacyclohexadecane- 1,4,7,10,13,16-hexaacetic acid (HEHA-NCS) is reported. This ligand was conjugated to three monoclonal antibodies, CC49, T101, and BL-3 with chelate-to-protein ratios between 1.4 and 2. The three conjugates were radiolabeled with (225)Ac, and serum stability study of the [(225)Ac]BL-3-HEHA conjugate was performed.     

Synthesis and characterization of a novel polyamidoamine-cyclodextrin crosslinked copolymer

A novel insoluble crosslinked copolymer containing β-cyclodextrin (β-CD) structural units has been synthesized with polyamidoamine (PAMAM, generation 2) as comonomer. The polymer was characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), elemental analysis, scanning electron microscopy (SEM), pores and surface area analysis, X-ray diffraction analysis (XRD), and thermal analysis (thermogravimetric and differential scanning calorimetric measurement, TG/DSC). The results reveal that PAMAM-CD copolymer has been synthesized successfully and two β-CD molecules were cross-linked by one PAMAM (G2.0) molecule (on average). The copolymer has a reef-like surface with many irregular nanocavities, and its thermal stability is > 180°C in an argon atmosphere. The synthesis strategy presented in this work provides an innovative route for the synthesis of a PAMAM-CD-based copolymer. In preliminary sorption experiments, the PAMAM-CD copolymer exhibits high sorption capacities and high removal efficiencies toward both the heavy-metal ions (Cu(2+) and Pb(2+)) and organic compounds (2,4-dichlorophenol, 2,4,6-trichlorophenol, and ponceau 4R (C.I. 16255)). The polymer may provide many possibilities for applications in biomedical sensing, flocculation, sorption, and therapeutics.