Chemically cross-linked chitosan hydrogel loaded with gelatin for chondrocyte encapsulation

Composite hydrogels can be used as a scaffolding material for chondrogenesis, which requires a biomimetic environment to maintain chondrocyte morphology and phenotype. In this study, gelatin molecules were loaded into a hydrogel polymerized from a chitosan derivative (CML) to form a semi-interpenetrating polymer network. While the porous structure of the hydrogels in the dry state was not dependent on the gelatin content, the collapse extent and pore size decreased as the gelatin content increased. The gelatin loading also reduced the swelling ratio of the CML hydrogel and enhanced the hydrogel strength at 20°C due to gelation of the gelatin. The release behavior of the gelatin from the CML hydrogel could be controlled by many factors, such as the amount of gelatin, temperature, and solution pH. The weight loss of the composite hydrogel was expedited after gelatin loading and showed a positive relationship with the gelatin content. The results of in vitro cell culture in the hydrogels revealed that gelatin loading improved cell viability and promoted proliferation and glycosaminoglycans secretion of chondrocytes. This new scaffold production technology for chondrocyte encapsulation provides a further step towards CML applications in tissue engineering and other biomedical areas.     

Growth and viability of mycelial fragments of white-rot fungi on some hydrogels

The viability of mycelial fragments of Trametes versicolor and Irpex lacteus and their growth on selected hydrogels are described. The size of mycelial fragments of the fungi did not significantly influence their viability. Alginate hydrogel films supported fungal growth better than agarose, carrageenan, chitosan and gelatin films, and had the highest mechanical strength but were less hydrophilic than the other hydrogels. All commercial alginates that were tested supported aseptic growth of fungal fragments without prior sterilization of the hydrogel solution. The viability of mycelial fragments in the hydrogel solutions was higher for some commercial alginates than that in laboratory grade alginate. The mechanical strength and hydrophilicity of hydrogels from alginate type Sobalg FD 155 and Meer HV were comparable to that of laboratory grade alginate. Sterilization and pH of the alginate hydrogel did not significantly influence the growth of T. versicolor mycelial fragments but affected the growth of I. lacteus. Concentrations of alginate in the range of 1–2% in the hydrogel did not affect the growth of entrapped mycelial fragments of these fungi. Received 25 June 1997/ Accepted in revised form 07 March 1998     

Synthesis and characterization of thermo-sensitive semi-IPN hydrogels based on poly(ethylene glycol)-co-poly(ε-caprolactone) macromer, N-isopropylacrylamide, and sodium alginate

Thermo-sensitive semi-IPN hydrogels were prepared via in situ copolymerization of N-isopropylacrylamide (NIPAAm) with poly(ethylene glycol)-co-poly(ε-caprolactone) (PEG-co-PCL) macromer in the presence of sodium alginate by UV irradiation technology. The effects of the sodium alginate content, temperature, and salt on the swelling behavior of the as-obtained hydrogels were studied. The results showed that the swelling ratio of the hydrogels increased with the increasing sodium alginate content at the same temperature, and decreased with the increase in temperature. The salt sensitivity of the semi-IPN hydrogels was dependent on the content of sodium alginate introduced in the hydrogels. The mechanical rheology of the hydrogels and in vitro release behavior of bovine serum albumin (BSA) in situ encapsulated within the hydrogels were also investigated. It was found that the introduction of sodium alginate with semi-IPN structure improved mechanical strength of the hydrogels and the cumulative release percentage of BSA from the hydrogels. Such double-sensitive semi-IPN hydrogel materials could be exploited as potential candidates for drug delivery carriers.     

Preparation of <Emphasis Type="Italic">in situ</Emphasis> Injectable Chitosan/Gelatin Hydrogel Using an Acid-tolerant Tyrosinase

An in situ injectable chitosan/gelatin hydrogel was formed under slightly acidic conditions (pH 4.0 ~ 4.5) using an acid-tolerant tyrosinase, tyrosinase-CNK. A homogeneous chitosan/tyrosinase-CNK solution was prepared in one part of a dual-barrel syringe, and highly soluble gelatin in distilled water was prepared in the other part of the syringe without any additional crosslinking materials. Chitosan/gelatin hydrogel was formed in situ by simple injection of the solutions at room temperature followed by curing at 37°C. However, conventional mushroom tyrosinase did not catalyze this permanent gel formation. Tyrosinase- CNK-catalyzed glycol chitosan/gelatin hydrogel was similarly formed by this in situ injection approach. The hydrogels exhibited a high swelling ratio of 20-fold their own weight, interconnected micropores with an average diameter of approximately 260 μm and in vitro biodegradability suitable for tissue engineering and drug delivery applications. These results showed that tyrosinase-CNK-mediated chitosan/gelatin hydrogel formation has remarkable potential for the development of novel formulations for in situ injectable gel-forming systems.     

Collective Cell Behavior in Mechanosensing of Substrate Thickness

Extracellular matrix stiffness has a profound effect on the behavior of many cell types. Adherent cells apply contractile forces to the material on which they adhere and sense the resistance of the material to deformation—its stiffness. This is dependent on both the elastic modulus and the thickness of the material, with the corollary that single cells are able to sense underlying stiff materials through soft hydrogel materials at low (<10 μm) thicknesses. Here, we hypothesized that cohesive colonies of cells exert more force and create more hydrogel deformation than single cells, therefore enabling them to mechanosense more deeply into underlying materials than single cells. To test this, we modulated the thickness of soft (1 kPa) elastic extracellular-matrix-functionalized polyacrylamide hydrogels adhered to glass substrates and allowed colonies of MG63 cells to form on their surfaces. Cell morphology and deformations of fluorescent fiducial-marker-labeled hydrogels were quantified by time-lapse fluorescence microscopy imaging. Single-cell spreading increased with respect to decreasing hydrogel thickness, with data fitting to an exponential model with half-maximal response at a thickness of 3.2 μm. By quantifying cell area within colonies of defined area, we similarly found that colony-cell spreading increased with decreasing hydrogel thickness but with a greater half-maximal response at 54 μm. Depth-sensing was dependent on Rho-associated protein kinase-mediated cellular contractility. Surface hydrogel deformations were significantly greater on thick hydrogels compared to thin hydrogels. In addition, deformations extended greater distances from the periphery of colonies on thick hydrogels compared to thin hydrogels. Our data suggest that by acting collectively, cells mechanosense rigid materials beneath elastic hydrogels at greater depths than individual cells. This raises the possibility that the collective action of cells in colonies or sheets may allow cells to sense structures of differing material properties at comparatively large distances.     

Synthesis and characterization of novel thiol-reactive poly(ethylene glycol) cross-linkers for extracellular-matrix-mimetic biomaterials

Synthetic extracellular matrix hydrogels can be used for three-dimensional cell culture, wound repair, and tissue engineering. Using the bifunctional electrophile poly(ethylene glycol) diacrylate (PEGDA), thiol-modified glycosaminoglycans and polypeptides can be cross-linked into biocompatible materials in the presence of cells or tissues. However, the rate of in situ cross-linking with PEGDA under physiological conditions may occur too slowly for clinical applications requiring a fast-curing preparation. To explore a wider range of cross-linking time courses, five homo-bifunctional PEG derivatives were synthesized and examined as cross-linking agents for thiol-modified derivatives of hyaluronan (HA). Thiol reaction rate constants were measured over a pH range of 7.4 to 8.6. The order of reactivity for the functional groups used was determined to be maleimide > iodoacetate > bromoacetate > iodoacetamide > acrylate > bromoacetamide, with rates increasing exponentially with increasing pH. The range of gelation times at physiological pH varied from less than 1 min to over 2 h. Addition of the cross-linkers to cell culture medium showed minimal cytotoxicity toward primary human dermal fibroblasts at concentrations anticipated during in situ cross-linking. Moreover, hydrogels prepared from thiol-modified gelatin and thiol-modified HA were biocompatible and supported attachment and proliferation of fibroblasts and hepatocytes.     

Antibacterial activity and biocompatibility of a chitosan-γ-poly(glutamic acid) polyelectrolyte complex hydrogel

In this study, we prepared a polyelectrolyte complex (PEC) hydrogel comprising chitosan as the cationic polyelectrolyte and γ-poly(glutamic acid) (γ-PGA) as the anionic polyelectrolyte. Fourier transform infrared spectroscopy revealed that ionic complex interactions existed in the chitosan-γ-PGA PEC hydrogels. The compressive modulus increased upon increasing the degree of complex formation in the chitosan-γ-PGA PEC hydrogel; the water uptake decreased upon increasing the degree of complex formation. At the same degree of complex formation, the compressive modulus was larger for the chitosan-dominated PEC hydrogels; the water uptake was larger for the γ-PGA-dominated ones. Scanning electron microscopy images revealed the existence of interconnected porous structures (pore size: 30-100 μm) in all of the chitosan-γ-PGA PEC hydrogels. The chitosan-γ-PGA PEC hydrogels also exhibited antibacterial activity against Escherichia coli and Staphylococcus aureus. In addition, in vitro cell culturing of 3T3 fibroblasts revealed that all the chitosan-γ-PGA PEC hydrogels were effective in promoting cell proliferation, especially the positively charged ones (chitosan-dominated). Therefore, the chitosan-γ-PGA polyelectrolyte hydrogel appears to have potential as a new material for biomedical applications.     

Smart hydrogels based on semi-interpenetrating polymeric networks of collagen-polyurethane-alginate for soft/hard tissue healing,drug delivery devices,and anticancer therapies

In this work, hydrogels based on semi-interpenetrating polymeric networks (semi-IPN) based on collagen-polyurethane-alginate were studied physicochemically and from different approaches for biomedical application. It was determined that the matrices in the hydrogel state are crosslinked by the formation of urea and amide bonds between the biopolymer chains and the polyurethane crosslinker. The increment in alginate content (0–40 wt%) significantly increases the swelling capacity, generating semi-crystalline granular structures with improved storage modulus and resistance to thermal, hydrolytic, and proteolytic degradation. The in vitro bioactivity results indicated that the composition of these novel hydrogels stimulates the metabolic activity of monocytes and fibroblasts, benefiting their proliferation; while in cancer cell lines, it was determined that the composition of these biomaterials decreases the metabolic activity of breast cancer cells after 48 h of stimulation, and for colon cancer cells their metabolic activity decreases after 72 h of contact for the hydrogel with 40 wt% alginate. The matrices show a behavior of multidose release of ketorolac, and a higher concentration of analgesic is released in the semi-IPN matrix. The inhibition capacity of Escherichia coli is higher if the polysaccharide concentration is low (10 wt%). The in vitro wound closure test (scratch test) results indicate that the hydrogel with 20 wt% alginate shows an improvement in wound closure at 15 days of contact. Finally, the bioactivity of mineralization was evaluated to demonstrate that these hydrogels can induce the formation of carbonated apatite on their surface. The engineered hydrogels show biomedical multifunctionality and they could be applied in soft and hard tissue healing strategies, anticancer therapies, and drug release devices.     

明胶/海藻酸钠/沙蒿胶复合水凝胶的制备及表征

为探究明胶（G）、海藻酸钠（SA）,沙蒿胶（ASKG）对复合水凝胶的力学性能、溶胀和保湿性能的影响,采用共混-离子交联法制备海藻酸钠/明胶/沙蒿胶复合水凝胶,并对制得的水凝胶进行结构表征和溶血率测试。结果表明:当G质量分数为2.5%,SA为1.5%,ASKG为0.7%时,复合水凝胶压缩强度达到427.2 kPa,拉伸强度达到563.449 kPa,断裂伸长率为117%,溶胀率为744%,且具有较好的保湿性能。红外光谱表明,由于沙蒿胶中存在大量羟基,因此加入沙蒿胶后在3 300 cm^-1～3 600 cm^-1羟基峰形变宽。G/SA/ASKG复合水凝胶溶血率低于5%,具有较好的网络孔结构和血液相容性,为复合水凝胶在医用敷料方面的应用提供一定的参考价值。     

Fibronectin glycosylation modulates fibroblast adhesion and spreading

The role of the carbohydrate residues of fibronectin concerning the specificities of that glycoprotein to interact with fibroblastic cell surfaces, gelatin, and heparin was examined. Tunicamycin was used to produce carbohydrate-depleted fibronectin; it was synthesized by cultured fibroblasts. Unglycosylated and glycosylated fibronectins were analyzed for their ability to bind gelatin and heparin, using affinity columns. Fibronectin-coated surfaces were used to quantitatively measure cell adhesion and spreading. The results showed that the lack of carbohydrates significantly increased the interaction of the protein with gelatin and markedly enhanced its ability to promote adhesion and spreading of fibroblasts. In contrast, the binding of fibronectin to heparin was not influenced by glycosylation. The composite data indicate that the Asn-linked oligosaccharides of fibronectin act as modulators of biological functions of the glycoprotein.     

Novel fabrication of morphology tailored nanostructures with Gelatin/Chitosan Co-polymeric bio-composited hydrogel system to accelerate bone fracture healing and hard tissue nursing care management

In this study, we are successfully fabricated on a hydrogel consisting of TiO₂ nanoparticles loaded onto a gelatin/chitosan matrix to control the acceleration of bone fracture healing and improved the nursing care applications. Each specimen (chitosan, gelatin and titanium dioxide) were characterized and confirmed by using different techniques, Fourier transforms infrared spectroscopy, X-ray diffraction analysis, Scanning Electron Microscopy with Elemental dispersive X-ray analysis, Thermo-gravimetric and Differential thermal analysis. In addition, the cell cytotoxicity results verified that the TiO₂/gelatin-chitosan hydrogel are nontoxic to osteoblasts. And cell fixation outcome after 5 days of incubation condition revels that the enhanced in vitro cell survival and cell spreading on the prepared TiO₂ incorporated hydrogel with respect to gelatin/chitosan hydrogel. Furthermore, TiO₂/gelatin-chitosan hydrogel nanostructures can modulate the bone fracture healing, indicating a potential application on nursing care.     

Morphologic and transcriptomic comparison of adipose- and bone-marrow-derived porcine stem cells cultured in alginate hydrogels

Advances in bioengineering, material chemistry, and developmental biology have led to the design of three-dimensional (3D) culture systems that better resemble the surrounding structure and chemistry of the in situ niches of cells in tissues. This study was designed to characterize and compare porcine adipose-derived stem cells (ADSC) and bone-marrow-derived stem cells (BMSC) induced to differentiate toward osteogenic and adipogenic lineages in vitro by using a 3D alginate hydrogel. The morphology and gene expression of the two cell populations during differentiation were analyzed. Both ADSC and BMSC showed morphological evidence of osteogenic and adipogenic differentiation. Expression patterns of genes characteristic of the onset of osteogenic differentiation (ALP, COL1A1, SPARC, SPP1) were low at the beginning of culture and generally increased during the period of differentiation up to 28 days in culture. Expression of genes associated with adipogenic differentiation (ACSL1, ADFP, ADIPOQ, CD36, DBI, DGAT2, PPARG, SCD) was consistently increased in ADSC cultured in alginate hydrogel relative to the start of differentiation. However, adipogenic gene expression of BMSC cultured in alginate hydrogel was more limited when compared with that of ADSC. Evaluation of cell numbers (via the MTT staining assay) suggested a greater viability of BMSC under osteogenic conditions in alginate hydrogels than under adipogenic conditions, whereas ADSC had greater viability under adipogenic conditions than under osteogenic conditions. This study thus provides an important initial evaluation of ADSC and BMSC seeded and differentiated toward the osteogenic and adipogenic cell lineages in a 3D alginate hydrogel in vitro.     

Preparation and Characterization of Silver Nanoparticles-Loaded Calcium Alginate Beads Embedded in Gelatin Scaffolds

Silver nanoparticles (AgNPs)-loaded alginate beads embedded in gelatin scaffolds were successfully prepared. The AgNPs-loaded calcium alginate beads were prepared by electrospraying method. The effect of alginate concentration and applied voltage on shape and diameter of beads was studied. The diameter of dry AgNPs-loaded calcium alignate beads at various concentrations of AgNO₃ ranged between 154 and 171 μm. The AgNPs-loaded calcium alginate beads embedded in gelatin scaffolds were fabricated by freeze-drying method. The water swelling and weight loss behaviors of the AgNPs-loaded alginate beads embedded in gelatin scaffolds increased with an increase in the submersion time. Moreover, the genipin-cross-linked gelatin scaffolds were proven to be nontoxic to normal human dermal fibroblasts, suggesting their potential uses as wound dressings.     

Bioactive polyacrylamide hydrogels with gradients in mechanical stiffness

We propose a novel, single step method for the production of polyacrylamide hydrogels with a gradient in mechanical properties. In contrast to already existing techniques such as UV photo‐polymerization with photomasks (limited penetration depth) or microfluidic gradient mixers (complex microfluidic chip), this technique is not suffering such limitations. Young's modulus of the hydrogels was varied by changing the total monomer concentration of the hydrogel precursor solution. Using programmable syringe pumps, the total monomer concentration in the solution fed to the hydrogel mold was varied from 16 wt% down to 5 wt% over the feeding time to obtain a gradient in compliance ranging from 150 kPa down to 20 kPa over a length of 10 mm down to 2.5 mm. Polymerization was achieved with the dual initiation system composed of ammonium persulfate and N,N,N′,N′‐tetramethylethylenediamine, which were both fed through separate capillaries to avoid premature polymerization. Functionalized with the model ligand collagen I, the substrates were bioactive and supported the attachment of human foreskin fibroblasts (around 30% of the cells seeded attached after 1 h). A kinetic morphology study on homogeneous hydrogels of different stiffness's indicated that fibroblasts tend to spread to their final size within 2 h on stiff substrates, while the spreading time was much longer (ca. 4–5 h) on soft substrates. These trends were confirmed on hydrogels with compliance gradients, showing well spread fibroblasts on the stiff end of the hydrogel after 2 h, while the cells on the soft end still had small area and rounded morphology. Biotechnol. Bioeng. 2013; 110: 1508–1519. © 2012 Wiley Periodicals, Inc.     

The direction of human mesenchymal stem cells into the chondrogenic lineage is influenced by the features of hydrogel carriers

Low back pain is a major public health issue in the Western world, one main cause is believed to be intervertebral disc (IVD) degeneration. To halt/diminish IVD degeneration, cell therapy using different biomaterials e.g. hydrogels as cell carriers has been suggested. In this study, two different hydrogels were examined (in vitro) as potential cell carriers for human mesenchymal stem cells (hMSCs) intended for IVD transplantation. The aim was to investigate cell-survival and chondrogenic differentiation of hMSCs when cultured in hydrogels Puramatrix^® or Hydromatrix^® and potential effects of stimulation with growth hormone (GH). hMSCs/hydrogel cultures were investigated for cell-viability, attachment, gene expression of chondrogenic markers SOX9, COL2A1, ACAN and accumulation of extracellular matrix (ECM). In both hydrogel types, hMSCs were viable for 28 days, expressed integrin β1 which indicates adhesion of hMSCs. Differentiation was observed into chondrocyte-like cells, in a higher extent in hMSCs/Hydromatrix^® cultures when compared to hMSCs/Puramatrix^® hydrogel cultures. Gene expression analyses of chondrogenic markers verified results. hMSCs/hydrogel cultures stimulated with GH displayed no significant effects on chondrogenesis.In conclusion, both hydrogels, especially Hydromatrix^® was demonstrated as a promising cell carrier in vitro for hMSCs, when directed into chondrogenesis. This knowledge could be useful in biological approaches for regeneration of degenerated human IVDs.     

Novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate as a pH-sensitive hydrogel

A novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate blended with distinct salts (CaCl2, Na2HPO4, or NaCl), as a pH-sensitive hydrogel was developed for protein drug delivery. It was noted that the salts blended in hydrogels may affect the structures of an entangled network of methylcellulose and alginate and have an effect on their swelling characteristics. The methylcellulose/alginate hydrogel blended with 0.7 M NaCl (with a gelation temperature of 32 degrees C) demonstrated excellent pH sensitivity and was selected for the study of release profiles of a model protein drug (bovine serum albumin, BSA). In the preparation of drug-loaded hydrogels, BSA was well-mixed to the dissolved aqueous methylcellulose/alginate blended with salts at 4 degrees C and then gelled by elevating the temperature to 37 degrees C. This drug-loading procedure in aqueous environment at low temperature may minimize degradation of the protein drug while achieving a high loading efficiency (95-98%). The amount of BSA released from test hydrogels was a function of the amount of alginate used in the hydrogels. The amount of BSA released at pH 1.2 from the test hydrogel with 2.5% alginate was relatively low (20%), while that released at pH 7.4 increased significantly (86%). In conclusion, the methylcellulose/alginate hydrogel blended with NaCl could be a suitable carrier for site-specific protein drug delivery in the intestine.     

An alginate hydrogel matrix for the localised delivery of a fibroblast/keratinocyte co-culture

There is significant interest in the development of tissue-engineered skin analogues, which replace both the dermal and the epidermal layer, without the use of animal or human derived products such as collagen or de-epidermalised dermis. In this study, we proposed that alginate hydrogel could be used to encapsulate fibroblasts and that keratinocytes could be cultured on the surface to form a bilayered structure, which could be used to deliver the co-culture to a wound bed, initially providing wound closure and eventually expediting the healing process. Encapsulation of fibroblasts in 2 and 5% w/v alginate hydrogel effectively inhibited their proliferation, whilst maintaining cell viability allowing keratinocytes to grow uninhibited by fibroblast overgrowth to produce a stratified epidermal layer. It was shown that the alginate degradation process was not influenced by the presence of fibroblasts within the hydrogel and that lowering the alginate concentration from 5 to 2% w/v increased the rate of degradation. Fibroblasts released from the scaffold were able to secrete extracellular matrix (ECM) and thus should replace the degrading scaffold with normal ECM following application to the wound site. These findings demonstrate that alginate hydrogel may be an effective delivery vehicle and scaffold for the healing of full-thickness skin wounds.     

Characterization of photo-cross-linked oligo[poly(ethylene glycol) fumarate] hydrogels for cartilage tissue engineering

Photo-cross-linkable oligo[poly(ethylene glycol) fumarate] (OPF) hydrogels have been developed for use in tissue engineering applications. We demonstrated that compressive modulus of these hydrogels increased with increasing polymer concentration, and hydrogels with different mechanical properties were formed by altering the ratio of cross-linker/polymer in precursor solution. Conversely, swelling of hydrogels decreased with increasing polymer concentration and cross-linker/polymer ratio. These hydrogels are degradable and degradation rates vary with the change in cross-linking level. Chondrocyte attachment was quantified as a method for evaluating adhesion of cells to the hydrogels. These data revealed that cross-linking density affects cell behavior on the hydrogel surfaces. Cell attachment was greater on the samples with increased cross-linking density. Chondrocytes on these samples exhibited spread morphology with distinct actin stress fibers, whereas they maintained their rounded morphology on the samples with lower cross-linking density. Moreover, chondrocytes were photoencapsulated within various hydrogel networks. Our results revealed that cells encapsulated within 2-mm thick OPF hydrogel disks remained viable throughout the 3-week culture period, with no difference in viability across the thickness of hydrogels. Photoencapsulated chondrocytes expressed the mRNA of type II collagen and produced cartilaginous matrix within the hydrogel constructs after three weeks. These findings suggest that photo-cross-linkable OPF hydrogels may be useful for cartilage tissue engineering and cell delivery applications.     

Growth modulation of fibroblasts by chitosan-polyvinyl pyrrolidone hydrogel: Implications for wound management?

Wounds in adults and fetuses differ in their healing ability with respect to scar formation. In adults, wounds lacking the epidermis exhibit excess collagen production and scar formation. Fibroblasts synthesize and deposit a collagen rich extracellular matrix. The early migration and proliferation of fibroblasts in the wound area is implicated in wound scarring. We have synthesized a hydrogel from chitosan-polyvinyl pyrrolidone (PVP) and examined its effect on fibroblast growth modulation in vitro. The hydrogel was found to be hydrophilic as seen from its octane contact angle (141.2+/-0.37 degrees). The hydrogel was non-toxic and biocompatible with fibroblasts and epithelial cells as confirmed by the 3(4,5-dimethylthiazolyl-2)-2, 5-diphenyl tetrazolium bromide (MTT) as-say. It showed dual properties by supporting growth of epithelial cells (SiHa) and selectively inhibiting fibro-blast (NIH3T3) growth. Growth inhibition of fibroblasts resulted from their inability to attach on to the hydrogel. These findings are supported by image analysis, which revealed a significant difference (P<0.05) between the number of fibroblasts attached to the hydrogel in tissue culture as compared to tissue culture treated polystyrene (TCPS) controls. However, no significant difference was observed (P>0.05) in the number of epithelial (SiHa) cells attached on to the hydrogel as compared to the TCPS control. Although in vivo experiments are awaited, these findings point to the possible use of chitosan-PVP hydrogels in wound-management.