A Highly Order‐Structured Membrane Electrode Assembly with Vertically Aligned Carbon Nanotubes for Ultra‐Low Pt Loading PEM Fuel Cells

A simple method was developed to prepare ultra‐low Pt loading membrane electrode assembly (MEA) using vertically aligned carbon nanotubes (VACNTs) as highly ordered catalyst support for PEM fuel cells application. In the method, VACNTs were directly grown on the cheap household aluminum foil by plasma enhanced chemical vapor deposition (PECVD), using Fe/Co bimetallic catalyst. By depositing a Pt thin layer on VACNTs/Al and subsequent hot pressing, Pt/VACNTs can be 100% transferred from Al foil onto polymer electrolyte membrane for the fabrication of MEA. The whole transfer process does not need any chemical removal and destroy membrane. The PEM fuel cell with the MEA fabricated using this method showed an excellent performance with ultra‐low Pt loading down to 35 μg cm^?2 which was comparable to that of the commercial Pt catalyst on carbon powder with 400 μg cm^?2. To the best of our knowledge, for the first time, we identified that it is possible to substantially reduce the Pt loading one order by application of order‐structured electrode based on VACNTs as Pt catalysts support, compared with the traditional random electrode at a comparable performance through experimental and mathematical methods.     

Genosensor for rapid,sensitive, specific point-of-care detection of H1N1 influenza (swine flu)

A 5′ amine group-linked haemagglutinin (HA) gene-specific probe was attached over the surface of a working electrode to develop a rapid, specific, and sensitive point of care detection assay for H1N1 (swine flu) in human respiratory nasal swabs. The probe was attached with a cysteine covered screen-printed gold electrode via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS). The electrochemical assay was performed using differential pulse voltammetry with the use of the redox indicator methylene blue for the detection of different concentrations of the single-stranded viral genome. The developed genosensor showed high sensitivity for H1N1 influenza virus with a detection limit of 0.002 ng/6 μL of viral nucleic acid in the sample. Samples were analysed by quantitative real-time Polymerase Chain Reaction as well as by conventional PCR. The genosensor showed high specificity, as no cross-reaction was observed with the heterologous nucleic acid of different pathogens (Salmonella typhi, Neisseria meningitides, and Streptococcus pyogenes) and human DNA, and it was specific for H1N1 with a sensitivity of ∼49 μA cm⁻² ng^-1. Genosensor is based on a very simple methodology that can be followed based on its easy-to-access approach. It is quick and could be used as a point-of-care test for the detection of influenza virus within 30 min.     

Electrode System for the Determination of Microbial Populations

Determinations of microbial populations were carried out by using a new electrode system composed of two electrodes. Each electrode was constructed from a platinum anode and a silver peroxide cathode. The anode of the reference electrode was covered with cellulose dialysis membrane. The response time of the electrode system was 15 min in culture broth, and current differences between the two electrodes were proportional to populations of microbial cells in cultures of Saccharomyces cerevisiae and Lactobacillus fermentum. Current differences were reproducible; the average relative error was 5%. Furthermore, cell populations of S. cerevisiae in a fermentor could be continuously estimated by using this electrochemical method.     

Development of a biosensor for urea assay based on amidase inhibition,using an ion-selective electrode

Abstract

A biosensor for urea has been developed based on the observation that urea is a powerful active-site inhibitor of amidase, which catalyzes the hydrolysis of amides such as acetamide to produce ammonia and the corresponding organic acid. Cell-free extract from Pseudomonas aeruginosa was the source of amidase (acylamide hydrolase, EC 3.5.1.4) which was immobilized on a polyethersulfone membrane in the presence of glutaraldehyde; an ion-selective electrode for ammonium ions was used for biosensor development. Analysis of variance was used for optimization of the biosensor response and showed that 30 μL of cell-free extract containing 7.47 mg protein mL^?1, 2 μL of glutaraldehyde (5%, v/v) and 10 μL of gelatin (15%, w/v) exhibited the highest response. Optimization of other parameters showed that pH 7.2 and 30 min incubation time were optimum for incubation of membranes in urea. The biosensor exhibited a linear response in the range of 4.0–10.0 μM urea, a detection limit of 2.0 μM for urea, a response time of 20 s, a sensitivity of 58.245 % per μM urea and a storage stability of over 4 months. It was successfully used for quantification of urea in samples such as wine and milk; recovery experiments were carried out which revealed an average substrate recovery of 94.9%. The urea analogs hydroxyurea, methylurea and thiourea inhibited amidase activity by about 90%, 10% and 0%, respectively, compared with urea inhibition.     

Simple and selective assay of 4-hydroxymephenytoin in human urine using solid-phase extraction and high-performance liquid chromatography with electrochemical detection and its preliminary application to phenotyping test

A simple and selective HPLC method for the determination of 4-hydroxymephenytoin (4-OH-M) in human urine, using a controlled potential coulometric detector equipped with a dual working electrode cell of fully porous graphite, has been developed. After acid hydrolysis of urine, 4-OH-M and the internal standard (I.S.), 5-hydroxy-1-tetralone, were extracted from urine by means of a Bond Elut Certify LRC column. The extracts were chromatographed on a reversed-phase μBondapak C₁₈ column using methanol-50 mM KH₂PO₄ (pH 4.0) (30:70, v/v) as the mobile phase at a flow-rate of 1.0 ml/min. Electrochemical detection at applied potential of 800 mV resulted in a limit of quantitation of 0.76 μg/ml. The method showed a satisfactory sensitivity, precision, accuracy, recovery and selectivity. The present method was applied to the phenotyping test in thirteen Japanese healthy volunteers who recieved an oral 10-mg racemic mephenytoin. The phenotypes determined by the present method were found to be in agreement with those obtained with the reported customary assay based on gas chromatography.     

Conductive,Solution‐Processed Dioxythiophene Copolymers for Thermoelectric and Transparent Electrode Applications

Conjugated polymers with high electrical conductivities are attractive for applications in capacitors, biosensors, organic thermoelectrics, and transparent electrodes. Here, a series of solution processable dioxythiophene copolymers based on 3,4‐propylenedioxythiophene (ProDOT) and 3,4‐ethylenedioxythiophene (EDOT) is investigated as thermoelectric and transparent electrode materials. Through structural manipulation of the polymer repeat unit, the conductivity of the polymers upon oxidative solution doping is tuned from 1 × 10^?3 to 3 S cm^?1, with a polymer consisting of a solubilizing alkylated ProDOT unit and an electron‐rich biEDOT unit (referred to as PE₂) showing the highest electrical conductivity. Optimization of the film casting method and screening of dopants result in AgPF₆‐doped PE₂ achieving a high electrical conductivity of over 250 S cm^?1 and a thermoelectric power factor of 7 μW m^?1 K^?2. Oxidized spray cast films of PE₂ are also assessed as a transparent electrode material for use with another electrochromic polymer. This bilayer shows reversible electrochemical switching from a colored charge‐neutral state to a highly transmissive color‐neutral, oxidized state. These results demonstrate that dioxythiophene‐based copolymers are a promising class of materials, with ProDOT–biEDOT serving as a soluble analog to the well‐studied PEDOT as a p‐type thermoelectric and electrode material.     

Determination of ketotifen fumarate by capillary electrophoresis with tris(2,2′‐bipyridyl) ruthenium(II) electrochemiluminescence detection

On the basis of an europium (III)‐doped Prussian blue analog film modifying platinum electrode as the working electrode, a Ru(bpy)₃²⁺‐based electrochemiluminescence (ECL) assay coupled with capillary electrophoresis has been first established for the determination of ketotifen fumarate (KTF). Analytes were injected onto a separation capillary of 50 cm length (50 μm i.d., 360 μm o.d.) by electrokinetic injection for 10 s at 10 kV. Parameters related to the separation and detection were discussed and optimized. It was proved that 15 mm phosphate buffer at pH 8.0 could achieve the most favorable resolution, and the highest sensitivity of detection was obtained using the detection potential at 1.25 V and 5 mm Ru(bpy)₃²⁺ in 100 mm phosphate buffer at pH 8.0 in the detection reservoir. Under the optimized conditions, the ECL intensity was in proportion to KTF concentration over the range from 3.0 × 10^?8 to 5.0 × 10^?6 g mL^?1 with a detection limit of 2.1 × 10^?8 g mL^?1 (3σ). The relative standard deviations of the ECL intensity and the migration time were 0.95 and 0.26%, respectively. The developed method was successfully applied to determine KTF contents in pharmaceuticals and human urine with recoveries between 99.5 and 107.0%. Copyright © 2010 John Wiley & Sons, Ltd.     

Electrocatalytic four-electron reduction of oxygen at the cytochrome c3-adsorbed electrode

The electrocatalytic activity of cytochrome c₃ for the reduction of molecular oxygen was characterized from the studies of the adsorption of cytochrome c₃ and the co-adsorption of cytochrome c₃ with cytochrome c on the mercury electrode by the a.c. polarographic technique. The adsorption of cytochrome c₃ on the mercury electrode is irreversible and is diffusion-controlled. The maximum amount of cytochrome c₃ adsorbed was 0.92 · 10^?11 mol · cm^?2 at ?0.90 V. The amount of cytochrome c₃ in the mixed adsorbed layer with cytochrome c was determined from the differential capacitance measurement. It was shown that the fractional coverage of cytochrome c₃ can be estimated from its bulk concentration and the diffusion coefficient (1.05 · 10^?6 cm² · s^?1). Cytochrome c₃ catalyzes the electrochemical reduction of molecular oxygen from the two-electron pathways via hydrogen peroxide to the four-electron pathway at the mercury electrode in neutral phosphate buffer solution. The catalytic activity varies with the bulk concentration of cytochrome c₃. The highest catalytic activity for the oxygen reduction (no hydrogen peroxide formation) is attained when one-half of the mercury electrode surface is covered by cytochrome c₃. The addition of cytochrome c or bovine serum albumin to the cytochrome c₃ solution inhibits the catalytic activity of cytochrome c₃. The reversible polarographic behavior of cytochrome c₃ through the mixed adsorbed layer of cytochrome c₃ and cytochrome c was also investigated.     

Amperometric l-lysine determination biosensor amplified with l-lysine oxidase nanoparticles and graphene oxide nanoparticles

We describe the amplification of amperometric l-lysine biosensor using l-lysine oxidase nanoparticles (LOxNPs) and graphene oxide nanoparticles (GrONPs) immobilized onto pencil graphite electrode (PGE). LOxNPs and GrONPs were characterized by UV spectroscopy and transmission electron microscopy (TEM). The working electrode (LOxNPs/GrONPs/PGE) was studied by scanning electron microscopy (SEM) and cyclic voltammetry at different stages of its construction. The biosensor showed optimum current at 0.7 V, pH 6.5, 35 °C, a detection limit of 0.01 μM, response time as 3.95 s and a wider linear range 0.01–1000 μM. The analytical recovery of added lysine in sera was 97 %. The within assay and between batch coefficients of variation for the biosensor were 0.068 and 0.074 % respectively. The biosensor measured l-lysine levels in sera of healthy adults and human immunodeficiency virus (HIV) patients. The biosensor exhibited good correlation with standard spectrophotometric method (R² = 0.989). The biosensor lost 35 % of its original activity after its regular uses for a period of 180 days, while being stored dry at 4 °C.     

Dual-beam difference spectroelectrochemistry

An optically transparent thin-layer electrode with carbon fibers as the working electrode is described for use in dual-beam difference spectroscopy. This cell simplifies obtaining the spectrum of a species of interest in the presence of mediators, cofactors, etc. The spectroelectrochemistry of cytochrome c with a large excess of spectrally interfering mediator present is shown.     

A biosensor based on the self-entrapment of glucose oxidase within biomimetic silica nanoparticles induced by a fusion enzyme

We constructed a fusion protein (GOx-R5) consisting of R5 (a polypeptide component of silaffin) and glucose oxidase (GOx) that was expressed in Pichia pastoris. Silaffin proteins are responsible for the formation of a silica-based cell matrix of diatoms, and synthetic variants of the R5 protein can perform silicification in vitro[1]. GOx secreted by P. pastoris was self-immobilized (biosilicification) in a pH 5 citric buffer using 0.1 M tetramethoxysilane as a silica source. This self-entrapment property of GOx-R5 was used to immobilize GOx on a graphite rod electrode. An electric cell designed as a biosensor was prepared to monitor the glucose concentrations. The electric cell consisted of an Ag/AgCl reference electrode, a platinum counter electrode, and a working electrode modified with poly(neutral red) (PNR)/GOx/Nafion. Glucose oxidase was immobilized by fused protein on poly(neutral red) and covered by Nafion to protect diffusion to the solution. The morphology of the resulting composite PNR/GOx/Nafion material was analyzed by scanning electron microscopy (SEM). This amperometric transducer was characterized electrochemically using cyclic voltammetry and amperometry in the presence of glucose. An image produced by scanning electron microscopy supported the formation of a PNR/GOx complex and the current was increased to 1.58 μA cm⁻¹ by adding 1 mM glucose at an applied potential of −0.5 V. The current was detected by way of PNR-reduced hydrogen peroxide, a product of the glucose oxidation by GOx. The detection limit was 0.67 mM (S/N = 3). The biosensor containing the graphite rod/PNR/GOx/Nafion detected glucose at various concentrations in mixed samples, which contained interfering molecules. In this study, we report the first expression of R5 fused to glucose oxidase in eukaryotic cells and demonstrate an application of self-entrapped GOx to a glucose biosensor.     

I. Novel capacitative electrode with a wide frequency range for measurements of flash-induced changes of interface potential at the oil-water interface Mechanical construction and electrical characteristics of the electrode

The mechanical construction and the electrical properties of a new type of capacitative electrode for the oil-water interface are described. The electrode is designed to detect changes of the interface potential induced by photochemical, photophysical, and photobiological reactions occurring at the interface. The construction is based on capacitative coupling of two aqueous compartments separated by a thin Teflon film. Thereby, the oil-water interface is in horizontal position and the electrode is placed with its planar bottom about 10 μm above the interface. A main feature of the electrode is the transparency to visible light which is achieved by having a clear electrolyte solution in the inner compartment of the capacitative electrode.The aqueous subphase and the inner electrolyte are connected with AglAgCl electrodes to voltage amplifiers. The capacitative electrode is best operated under open circuit conditions. The frequency range experimentally verified is 500 $\text{MHz}\text{\$}\text{?}\text{?}{}_{\mathrm{<mtext>3</mtext><mtext>dB</mtext>}}\text{\$}\text{?}\text{0.03}\text{Hz}$. The sensitivity is mainly determined by the noise of the electronic amplifiers, typical 50–100 μV.     

Sensing photosynthetic herbicides in an electrochemical flow cell

Specific inhibitory reactions of herbicides with photosynthetic reaction centers bound to working electrodes were monitored in a conventional electrochemical cell and a newly designed microfluidic electrochemical flow cell. In both cases, the bacterial reaction centers were bound to a transparent conductive metal oxide, indium-tin-oxide, electrode through carbon nanotubes. In the conventional cell, photocurrent densities of up to a few μA/cm² could be measured routinely. The photocurrent could be blocked by the photosynthetic inhibitor terbutryn (I ₅₀ = 0.38 ± 0.14 μM) and o-phenanthroline (I ₅₀ = 63.9 ± 12.2 μM). The microfluidic flow cell device enabled us to reduce the sample volume and to simplify the electrode arrangement. The useful area of the electrodes remained the same (ca. 2 cm²), similar to the classical electrochemical cell; however, the size of the cell was reduced considerably. The microfluidic flow control enabled us monitoring in real time the binding/unbinding of the inhibitor and cofactor molecules at the secondary quinone site.     

Baculovirus immediate-early promoter-mediated expression of the Zeocin™ resistance gene for use as a dominant selectable marker in Dipteran and Lepidopteran insect cell lines

The antibiotic Zeocin, a derivative of phleomycin, was evaluated for use as a selection system in both dipteran and lepidopteran insect cell lines. Growth of Drosophila cell lines, Kc1 and SL2, was inhibited at Zeocin concentrations of 50 and 75 μg/ml, respectively, while the Spodoptera cell line, Sf9, was inhibited at a concentration of 250 μg/ml Zeocin. The mammalian cytomegalovirus (CMV) and Simian virus 40 (SV40) early promoters did not function in these insect cell lines. Several baculovirus-derived immediate-early (IE) promoters from the Orgyia pseudotsugata multicapsid nucleopolyhedrovirus (OpMNPV) and Autographa californica multicapsid nucleopolyhedrovirus (AcMNPV) were used to drive expression of the Zeocin resistance gene (ble) in these cell lines. The resulting plasmid vectors enabled selection of Zeocin-resistant cell lines within 3–4 weeks. Gene amplification events in the presence of increasing Zeocin concentrations were not detected using Southern blot analysis. Furthermore, the function of the baculovirus IE promoters, as demonstrated by β-galactosidase expression, was not detectable in a variety of mammalian cell lines tested. A cloning/shuttle vector, containing ten unique restriction sites, was constructed which allows for selection of Zeocin resistance in insect cell lines and in Escherichia coli.     

Nickel(II)-baicalein complex modified multiwall carbon nanotube paste electrode and its electrocatalytic oxidation toward glycine

A modified electrode, nickel(II)-baicalein complex modified multiwall carbon nanotube paste electrode (Ni(II)-BA-MWCNT-PE), has been fabricated by electrodepositing Ni(II)-BA complex on the surface of MWCNT-PE in alkaline solution. The Ni(II)-BA-MWCNT-PE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni(II)-BA-carbon paste electrode (CPE). It also shows better electrocatalytic activity toward the oxidation of glycine than Ni(II)-MWCNT-PE. Kinetic parameters such as the electron transfer coefficient α, rate constant k_s of the electrode reaction, the diffusion coefficient D of glycine, and the catalytic rate constant k_cat of the catalytic reaction are determined. Moreover, the catalytic currents present linear dependence on the concentration of glycine from 20 μM to 1.0 mM by amperometry. The detection limit and sensitivity are 9.2 μM and 3.92 μA mM⁻¹, respectively. The modified electrode for glycine determination is of the property of simple preparation, fast response, and good stability.     

Polyphenol biosensor based on laccase immobilized onto silver nanoparticles/multiwalled carbon nanotube/polyaniline gold electrode

Laccase purified from Ganoderma sp. was immobilized covalently onto electrochemically deposited silver nanoparticles (AgNPs)/carboxylated multiwalled carbon nanotubes (cMWCNT)/polyaniline (PANI) layer on the surface of gold (Au) electrode. A polyphenol biosensor was fabricated using this enzyme electrode (laccase/AgNPs/cMWCNT/PANI/Au electrode) as the working electrode, Ag/AgCl as the reference electrode, and platinum (Pt) wire as the auxiliary electrode connected through a potentiostat. The biosensor showed optimal response at pH 5.5 (0.1 M acetate buffer) and 35 °C when operated at a scan rate of 50 mV s⁻¹. Linear range, response time, and detection limit were 0.1–500 μM, 6 s, and 0.1 μM, respectively. The sensor was employed for the determination of total phenolic content in tea, alcoholic beverages, and pharmaceutical formulations. The enzyme electrode was used 200 times over a period of 4 months when stored at 4 °C. The biosensor has an advantage over earlier enzyme sensors in that it has no leakage of enzyme during reuse and is unaffected by the external environment due to the protective PANI microenvironment.     

Chromosomes of the caryophyllidean tapeworm Glaridacris laruei

The chromosomes of the monozoic tapeworm Glaridacris laruei, from 4 locations in New York State, were studied in leucobasic fuchsin stained squashes of testes and vitelline cells. The diploid chromosome number is 16. Metaphase figures from vitelline cells consist of 3 pairs of metacentrics (“V's”), 4 pairs of acrocentrics (“rods”), and 1 pair of submetacentrics (“J's”). The complement is characterized by a pair of metacentrics 9 μm long, representing 11.5% of the total chromosome length. The shortest are acrocentrics, 2–4 μm long. Meiosis was observed only in spermatogenesis, which proceeds as usual with normal sperm formed after 2 meiotic divisions. Colchicine pretreatment did not facilitate analysis of chromosomes. The scarcity of cell division in 2 populations of G. laruei suggests a possible mitotic rhythm or temperature effect on cell division. Similarities were observed between the the complements of G. laruei and Hunterella nodulosa (2n = 14). A theoretical idiogram, constructed from that of G. laruei, closely resembles H. nodulosa, indicating that there may be a close cytological relationship between these phenotypically different caryophyllids. An idiogram and photographs of chromosomes supplement the paper.     

Application of carbon fiber composite minielectrodes for measurement of kinetic constants of nitric oxide decay in solution

Carbon fiber microelectrodes and carbon fiber composite minielectrodes (CFM/CFCM) have been generally used for measurements of nitric oxide (NO) concentration in chemical and biological systems. The response time of a CFM/CFCM is usually from milliseconds to seconds depending on the electrode size, the thickness of coating layers on the electrode, and NO diffusion coefficients of the coating layers. As a result, the time course of recoded current changes (I–t curves) by the CFM/CFCM may be different from the actual time course of NO concentration changes (c–t curves) if the half-life of NO decay is close to or shorter than the response time of the electrode used. This adds complexity to the process for determining rate constants of NO decay kinetics from the recorded current curves (I–t curves). By computer simulations based on a mathematical model, an approximation method was developed for determining rate constants of NO decay from the recorded current curves. This method was first tested and valuated using a commercial CFCM in several simple reaction systems with known rate constants. The response time of the CFCM was measured as 4.7 ± 0.7 s (n = 5). The determined rate constants of NO volatilization and NO autoxidation in our measurement system at 37 °C are (1.9 ± 0.1) × 10^?3 s^?1 (n = 4) and (2.0 ± 0.3) × 10³ M^?1 s^?1 (n = 7), which are close to the reported rate constants. The method was then applied to determine the rate of NO decay in blood samples from control and smoking exposed mice. It was observed that the NO decay rate in the smoking group is >20% higher than that in control group, and the increased NO decay rate in the smoking group was reversed by 10 μM diphenyleneiodonium chloride (DPI), an inhibitor of flavin enzymes such as leukocyte NADPH oxidase.     

High-performance liquid chromatographic assay for methyl-β-cyclodextrin in plasma and cell lysate

This paper describes a high-performance liquid chromatographic method with fluorescence detection for the analysis of methyl-β-cyclodextrin (MEBCD) in plasma and cell lysate, after in situ complexation with 1-naphthol. The size-exclusion HPLC column packed with TSK 3000 SW gel, was equilibrated with an eluent mixture composed of methanol and purified water (2:98, v/v) containing 10⁻⁴ M 1-naphthol as a fluorophore. The detection is based on fluorescence enhancement caused by the formation of inclusion complexes and was performed at 290 and 360 nm for excitation and emission, respectively. The method involved a simple treatment of the samples with chloroform. Daunorubicin was used as internal standard. Limits of quantitation were 0.8 μM in plasma and 0.5 μM in cell lysate. Detection limits of 0.5 μM (50 pmol) and 0.3 μM (30 pmol) were obtained for MEBCD in the two media, respectively. Linear detection response was obtained for concentrations ranging from 1 to 100 μM in plasma and cell lysate. Recovery from plasma proved to be more than 40%. Precision, expressed as C.V. was in the range of 4 to 11%. Accuracy ranged from 89 to 105%.