Endoglucanase sensitivity for substituents in methyl cellulose hydrolysis studied using MALDI-TOFMS for oligosaccharide analysis and structural analysis of enzyme active sites

The properties of modified cellulose polymers, such as methylcellulose, are significantly influenced by the distribution of substituents along the polymer backbone. This distribution is difficult to determine due to the lack of suitable analytical methods. One approach is to use cellulose-degrading enzymes to gain information from the capability of the enzymes to cleave the bonds between glucose units. Endoglucanases are cellulase enzymes that can break internal glycosidic linkages and degrade low substituted regions of modified cellulose where the substituents do not interfere with the enzyme active site. In this work methyl cellulose was degraded using five endoglucanases from glycosyl hydrolase families 5 and 7 from three different species. The products were analyzed with reducing end analysis, chromatography (SEC-MALS-RI), and MALDI-TOFMS. The results were correlated with available determined enzyme structures and using structural alignment for unknown enzyme structures. This was performed in order to elucidate the relationship between active site structures and sensitivity for substituents on derivatized cellulose. The evaluation of endoglucanase hydrolysis of methyl cellulose showed that differences in sensitivity could be related to differences in steric hindrance of substituents in the active site, which could explain differences within family 5 and 7 enzymes, as well as the generally higher substituent tolerance for family 5 enzymes. This information is important for use of endoglucanases as tools for characterization of substituent distribution. The results are also valuable since soluble cellulose derivatives are generally used as substrates during enzyme characterization and in endoglucanase activity assays.     

Regioselective esterification and etherification of cellulose: a review

Deep understanding of the structure-property relationships of polysaccharide derivatives depends on the ability to control the position of the substituents around the monosaccharide ring and along the chain. Equally important is the ability to analyze position of substitution. Historically, both synthetic control and analysis of regiochemistry have been very difficult for cellulose derivatives, as for most other polysaccharide derivatives. With the advent of cellulose solvents that are suitable for chemical transformations, it has become possible to carry out cellulose derivatization under conditions sufficiently mild to permit increasingly complete regiochemical control, particularly with regard to the position of the substituents around the anhydroglucose ring. In addition, new techniques for forming cellulose and its derivatives from monomers, either by enzyme-catalyzed processes or chemical polymerization, permit us to address new frontiers in regiochemical control. We review these exciting developments in regiocontrolled synthesis of cellulose derivatives and their implications for in-depth structure-property studies.     

Preparation of sulfoacetate derivatives of cellulose by direct esterification

A new and efficient method for the preparation in one step of water-soluble cellulose acetate sulfate derivatives (CAS) is reported. Acetylation and sulfation were carried out simultaneously, using a mixture of acetic anhydride and sulfuric acid in glacial acetic acid. The reaction time and the amount of acetic anhydride were optimized and the method provided water-soluble esters, with a degree of acetylation in the range 1.6 and 2.4 and a degree of sulfation of 0.3. This method has been successfully applied to pure cellulose and to cellulose-enriched materials obtained from agricultural by-products. The product exhibited a high viscosity in aqueous solution suggesting interesting rheological properties.     

Novel cellulose derivatives. Part VI. Preparation and thermal analysis of two novel cellulose esters with fluorine-containing substituents

Two novel cellulose esters were prepared with fluorine (F)-containing substituents using homogeneous phase reaction chemistry in DMAc/LiCl. The partially substituted derivatives and their corresponding perpropionates proved to be thermoplastic polymers. The 2,2-difluoroethoxy and 2,2,3,3,4,4,5,5-octafluoropentoxy substituents were easily identified by ¹H- and ¹⁹F-NMR spectroscopy without disclosing their precise location on the anhydroglucose unit. Thermal analysis revealed modest or no crystallinity; glass transition temperatures between 53 and 113°C; and improved thermal stability as compared to their F-free counterparts.     

Solid-state CP/MAS C-NMR analysis of cellulose and tri-O-substituted cellulose ethers

Highly crystalline tri-O-substituted cellulose ethers having ethyl, n-propyl, n-butyl, allyl, and methallyl substituents were prepared from low-molecular weight cellulose (DP = 15). Influences of conformational and packing effects on solid-state ¹³C-NMR spectra were studied by using X-ray diffraction and solid- and solution-state ¹³C-NMR analyses of the cellulose derivatives. Unit-cell sizes tentatively obtained from X-ray diffraction patterns of the cellulose derivatives indicated that conformations and packing states of cellulose chains and alkyl chains of substituents were different between the derivatives. Solid- and solution-state ¹³C-NMR spectra of cellulose allomorphs, and effects of hydrogen bonds present in celluloses I, II, and III on chemical shifts of their solid-state ¹³C-NMR spectra were proposed.     

Substituent distribution and clouding behavior of hydroxypropyl methyl cellulose analyzed using enzymatic degradation

The distribution of substituents along the polymer backbone will have a strong influence on the properties of modified cellulose. Endoglucanases were used to degrade three different batches of hydroxypropyl methyl cellulose (HPMC) derivatives with similar chemical properties. The phase separation of the HPMCs as a function of temperature, i.e., the clouding behavior, was analyzed prior to degradation. The total amount of unsubstituted glucose was determined using total acid hydrolysis followed by high-performance anion-exchange chromatography with pulsed amperometric detection (HPAEC-PAD). The products after enzymatic degradation were analyzed with size-exclusion chromatography with online multiangle light scattering and refractive index detection and also with reducing end determination. To further characterize the formed products, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was employed for analysis of short-chained oligosaccharides. The different endoglucanases showed varying degradation capability of HPMC derivatives, depending on structure of the active site. The investigated HPMCs had different susceptibility to degradation by the endoglucanases. The results showed a difference in substituent distribution between HPMC batches, which could explain the differing clouding behaviors. The batch with the lowest cloud point was shown to contain a higher number of non-degradable, highly substituted regions.     

Distribution of substituents in O-(2-hydroxyethyl)cellulose

The distribution of substituents in four samples of O-(2-hydroxyethyl)cellulose has been investigated by methylation analysis. One sample was commercial and the others were prepared under conditions analogous to those used industrially during the hydroxyethylation step in the manufacture of O-ethyl-O-(2-hydroxyethyl)cellulose. The results indicate that the distribution of substituents is similar to that expected for a homogeneous reaction.     

Synthesis and Study of Copper-Containing Polymers of Microcrystalline Cellulose Sulfates from Larch Wood

For the first time, the synthesis of water-soluble copper-containing microcrystalline cellulose sulfates (Сu-MCS) has been performed by the ion exchange method. The composition of the products has been studied by chemical methods and X-ray spectral microanalysis. The copper content in the Сu-MCS samples was 12.6–14.1%. The absence of sodium in the resulting polymer indicates the complete substitution of the sodium cations by the copper cations in the sodium salt of MCC sulfate. The structure of the copper-containing sulfates of microcrystalline cellulose has been confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and electron paramagnetic resonance (EPR). According to the XRD method, Сu-MCS and Na-MCS have an amorphous structure in contrast to the original MCC samples, which have a high degree of crystallinity. The EPR data have demonstrated the formation of a pseudocrystalline structure of the copper-containing salt system in the Сu-MCS samples. As shown by atomic-force microscopy, the surface of the Сu-MCS films consists of homogeneous crystallites, which have a spherical or slightly extended form with the size of about 70 nm. The film surface is quite homogeneous in its phase composition and contains no impurities.

     

Hydrodynamic properties of aqueous solutions of galactomannans

Galactomannans were extracted from the seeds of seven different legumes to obtain samples which differed in average molecular weight, in polydispersity, and in average mannose-to-galactose ratio in the molecule. Measurements were made of the viscosities as a function of shear rate and of the sedimentation and diffusion coefficients of the aqueous solutions of all the galactomannans. Average molecular weights were calculated from the sedimentation and diffusion coefficients using the Svedberg equation. The Mark-Houwink relationship between the intrinsic viscosity and the average molecular weights was found to hold for the series of galactomannans despite differences in the mannose-to-galactose ratios of the solutes. Estimates were made of the galactomannan polydispersities from both the sedimentation-coeffient distributions and also from the diffusion-coefficient ratios, D_m/D_A. The two methods gave results in qualitative agreement. The hydrodynamic properties of the more homogeneous galactomannans were compared with the predictions of the Flory-Fox hydro-dynamic theory, with results very similar to those which were obtained for the water-soluble synthetic cellulose derivatives, hydroxyethylcellulose and ethydroxycellulose.     

Synthesis and characterization of a trifunctional aminoamide cellulose derivative

As part of an effort to synthesize a dendronized cellulose, we have synthesized a trifunctional aminoamide derivative, which is the first generation of a dendron substituent. We anticipate that a dendronized cellulose would have applications in complexing metals and could be employed as an adjuvant for drugs. The trifunctional aminoamide substituent was introduced by coupling di-tert-butyl 4-[2-(tert-butoxycarbonyl)ethyl]-4-aminoheptanedicarboxylate, BA, directly to a (carboxymethyl)cellulose (CMC) backbone and converting the tert-butyl ester peripheral groups to aminoamide substituents by use of N,N-dimethyl-1,3-propanediamine. Confirmation of the proposed chemical structure of the intermediates as well as the water-soluble aminoamide derivative (CMCBADMPDA) was obtained by Fourier transform infrared (FT-IR) and NMR spectroscopy. The degree of substitution (DS) was determined to be 0.40 +/- 0.01 by thermogravimetric analysis. Typical weight average molecular weight (M(w)), molecular weight distribution (MWD), and molecular size of the dendronized polymers were found to be 97,000, 1.7, and 17.4 nm for derivatives of a CMC with corresponding M(w), MWD, and root-mean-square radius (RMS) of 230 000, 3.2, and 24 nm. A differential refractive index (dn/dc) for the aminoamide derivative measured in aqueous 0.40 N ammonium acetate-0.01 N NaOH was found to be 0.1473. The intrinsic viscosity of the dendronized cellulose decreased significantly when compared with that of CMC, that is, 0.40 dL/g relative to 5.60 dL/g. The hydrophobicity of the CMCBADMPDA microenvironment in aqueous solution was probed by evaluating the relative fluorescence intensities of the I(373)/I(384) pyrene bands; a slightly more hydrophobic environment was observed.     

Polyvinylamine-graft-TEMPO adsorbs onto, oxidizes, and covalently bonds to wet cellulose

Described is a new, greener approach to increasing adhesion between wet cellulose surfaces. Polyvinylamine (PVAm) with grafted TEMPO spontaneously adsorbs onto cellulose and oxidizes the C6 hydroxyl to aldehyde groups that react to form covalent bonds with primary amines on PVAm. Grafted TEMPO offers two important advantages over solutions of low-molecular-weight water-soluble TEMPO derivatives. First, the oxidation of porous cellulose wood fibers is restricted to the exterior surfaces accessible to high-molecular-weight PVAm. Thus, fibers are not weakened by excessive oxidation of the interior fiber wall surfaces. The second advantage of tethered TEMPO is that the total dose of TEMPO required to oxidize dilute fiber suspensions is much less than that required by water-soluble TEMPO derivatives. PVAm-TEMPO is stable under oxidizing conditions. The oxidation activity of the immobilized TEMPO was demonstrated by the conversion of methylglyoxal to pyruvic acid.     

Homogeneous modification of sugarcane bagasse cellulose with succinic anhydride using a ionic liquid as reaction medium

The homogeneous chemical modification of sugarcane bagasse cellulose with succinic anhydride using 1-allyl-3-methylimidazolium chloride (AmimCl) ionic liquid as a reaction medium was studied. Parameters investigated included the molar ratio of succinic anhydride/anhydroglucose units in cellulose in a range from 2:1 to 14:1, reaction time (from 30 to 160min), and reaction temperature (between 60 and 110 degrees C). The succinylated cellulosic derivatives were prepared with a low degree of substitution (DS) ranging from 0.071 to 0.22. The results showed that the increase of reaction temperature, molar ratio of SA/AGU in cellulose, and reaction time led to an increase in DS of cellulose samples. The products were characterized by FT-IR and solid-state CP/MAS (13)C NMR spectroscopy, and thermal analysis. It was found that the crystallinity of the cellulose was completely disrupted in the ionic liquid system under the conditions given. The data also demonstrated that homogeneous modification of cellulose with succinic anhydride in AmimCl resulted in the production of cellulosic monoester. The thermal stability of the succinylated cellulose decreased upon chemical modification.     

Alteration of in vivo cellulose ribbon assembly by carboxymethylcellulose and other cellulose derivatives

In vivo cellulose ribbon assembly by the Gram-negative bacterium Acetobacter xylinum can be altered by incubation in carboxymethylcellulose (CMC), a negatively charged water-soluble cellulose derivative, and also by incubation in a variety of neutral, water-soluble cellulose derivatives. In the presence of all of these substituted celluloses, normal fasciation of microfibril bundles to form the typical twisting ribbon is prevented. Alteration of ribbon assembly is most extensive in the presence of CMC, which often induces synthesis of separate, intertwining bundles of microfibrils. Freeze- etch preparations of the bacterial outer membrane suggest that particles that are thought to be associated with cellulose synthesis or extrusion may be specifically organized to mediate synthesis of microfibril bundles. These data support the previous hypothesis that the cellulose ribbon of A. xylinum is formed by a hierarchical, cell- directed, self-assembly process. The relationship of these results to the regulation of cellulose microfibril size and wall extensibility in plant cell walls is discussed.     

Untersuchungen zur enzymatischen Hydrolyse wasserlöslicher Celluosederivate im Hinblick auf die Bestimmung der Endo-β-1,4-glucanase-Aktivität

Using as substrates various water-soluble cellulose derivatives differing in DS and type of substituent, the efficiency of enzyme action in dependence of pH and the “CMC ase activity” of a Gliocladium spec. cellulase was investigated, stressing the significant role of effective charge density in connection with the results obtained with ionic derivatives of cellulose. From the results conclusions are drawn with regard to the proper choice of the substrate in determining CMC-ase activity.     

Synthesis and HPLC chiral recognition of regioselectively carbamoylated cellulose derivatives

Four regioselective-carbamoylated cellulose derivatives having two different substituents at 2-, 3-, and 6-position were prepared and evaluated as chiral stationary phases (CSPs) for high-performance liquid chromatography. Investigations showed that the nature and arrangement of the substituents significantly influenced the chiral recognition abilities of the heterosubstituted cellulose derivatives and each derivative exhibited characteristic enantioseparation. Some racemates were better resolved on these derivatives than the corresponding homogeneously substituted cellulose derivatives including a commercial CSP, Chiralcel OD. Racemic compounds shown in this study were most effectively discriminated on cellulose 2,3-(3-chloro-4-methylphenylcarbamate)-6-(3,5-dimethylphenylcarbamate) and 2,3-(3,5-dimethylphenylcarbamate)-6-(3-chloro-4-methylphenylcarbamate).     

Synthesis and characterization of folic acid modified water-soluble chitosan derivatives for folate-receptor-mediated targeting

Three chemical modification methods of carboxymethylation, quaternization and hydroxypropylation were used to synthesize water-soluble chitosan derivatives. In order to study the feasibility of these chitosan derivatives as backbones of nuclear imaging agents, folic acid (FA) and Technetium-99m were introduced onto the water-soluble chitosan chains. The bifunctional chelating agent 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA) was conjugated to the folate grafted chitosan derivatives for chelating with radionuclides such as (64)Cu and (68)Ga. The structures of these new ligands were characterized with multiple methods. The solubility and stability of the (99m)Tc-complexes were both favorable. Further study of their radiochemical and biological properties will be performed to evaluate the usefulness of these water-soluble chitosan derivatives for nuclear imaging agent design.     

Characterization of chemical substitution of hydroxypropyl cellulose using enzymatic degradation

The distribution of substituents along the polymer backbone will have a strong influence on the properties of modified cellulose. Endoglucanases were used to degrade a series of hydroxypropyl cellulose (HPC) derivatives with a high degree of substitution. The HPCs were characterized with cloud-point analysis prior to degradation. The extent of enzymatic degradation was determined with size-exclusion chromatography with online multi-angle light scattering and refractive index detection and also with high-pH anion exchange chromatography with pulsed amperometric detection. To further characterize the formed products, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was employed for analysis of short-chained oligosaccharides. The different endoglucanases showed varying degradation capability depending on structure of the active site. The highly substituted HPCs had different susceptibility to degradation by the endoglucanases. The results show a difference in substituent distribution between HPCs, which would explain the differing cloud-point behaviors. Increased number of regions with low substitution could be correlated with lower polymer cloud point. The study shows the usefulness of enzymatic degradation to study the distribution of substituents in soluble biopolymer derivates.     

Chemical force microscopy of cellulosic fibers

Atomic force microscopy with chemically modified cantilever tips (chemical force microscopy) was used to study the pull-off forces (adhesion forces) on cellulose model surfaces and bleached softwood kraft pulp fibers in aqueous media. It was found that for the –COOH terminated tips, the adhesion forces are dependent on pH, whereas for the –CH₃ and –OH terminated tips adhesion is not strongly affected by pH. Comparison between the cellulose model surfaces and cellulosic fibers under our experimental conditions reveal that surface roughness does not affect adhesion strongly. X-ray photoelectron spectroscopy (XPS) and Fourier Transformed Infrared (FTIR) spectroscopy reveal that both substrate surfaces have homogeneous chemical composition. The results show that chemical force microscopy can be used for the chemical characterization of cellulose surfaces at a nano-level.     

Enzymatic production of ethanol from cellulose using soluble cellulose acetate as an intermediate

A two-stage process for the enzymatic conversion of cellulose to ethanol is proposed as an alternative to currently incomplete and relatively slow enzymatic conversion processes employing natural insoluble cellulose. This alternative approach is designed to promote faster and more complete conversion of cellulose to fermentable sugars through the use of a homogeneous enzymatic hydrolysis reaction. Cellulose is chemically dissolved in the first stage to form water-soluble cellulose acetate (WSCA). The WSCA is then converted to ethanol in a simultaneous saccharification-fermentation with Pestal-otiopsis westerdijkii enzymes (containing cellulolytic and acetyl esterase components) and yeast.Water-soluble cellulose acetate was successfully prepared from purified wood cellulose (Solka Floe) and chemical reagents. Enzyme pretreatment of WSCAto form metabolizable sugars was a necessary step in achieving practical conversion of WSCA to ethanol using yeast. The results showed that WSCA has a low enzyme requirement and a high convertibility to reducing sugars with enzymes from P. westerdijkii fungus. Pestalotiopsis westerdijkii enzymes were found to be superior to enzymes from Trichoderma viride in producing metabolizable glucose from WSCA. The yeast utilized 55-70% of the hydrolyzate sugars that were produced by P. westerrlijkii enzymes on WSCA and produced ethanol. The acetate that was liberated into solution by the action of acetyl esterase enzymes on WSCA was found to have a stimulatory effect on ethanol production in yeast. This is an important feature that can be used to advantage in manipulating the conversion to maximize the production of ethanol. Hence, the simultaneous saccharification-fermentation of WSCA to ethanol using P. westerdijkii enzymes and yeast has features that are highly desirable for developing an economical cellulose conversion process.     

One-pot synthesis in aqueous system for water-soluble chitosan-graft-poly(ethylene glycol) methyl ether

Chitosan is functionalized with poly(ethylene glycol) methyl ether (mPEG) at the amino and hydroxyl groups via a single step reaction in a homogeneous aqueous system. A chitosan aqueous solution obtained from the mixture of chitosan and hydroxybenzotriazole (HOBt) in water is a key factor in providing mild conditions to conjugate mPEG by using a carbodiimide conjugating agent. The reaction at ambient temperature for 24 h gives chitosan-g-mPEG with water solubility with mPEG content as high as 42%. This work demonstrates that a water-soluble chitosan-HOBt complex is an effective system for the preparation of chitosan derivatives via the aqueous system without the use of acids or organic solvents.