The inverted repeats of IS<Emphasis Type="Italic">1384</Emphasis>, a newly described insertion sequence from<Emphasis Type="Italic"> Pseudomonas putida</Emphasis> strain H,represent the specific target for integration of IS<Emphasis Type="Italic">1383</Emphasis>

Analysis of a region on plasmid pPGH1 from Pseudomonas putida strain H that is flanked by two copies of IS1383 has revealed an additional element with the typical features of a bacterial insertion sequence. This new IS element, designated IS1384, contains a single ORF of 972 bp, and is flanked by 9-bp inverted repeats. Based on sequence homology and structural characteristics of the putative transposase it encodes, IS1384 belongs to the IS5 subgroup of the IS5 family. Two copies of IS1384 are present on plasmid pPGH1, whereas none could be detected on the chromosome of P. putida strain H. Sequence analysis revealed the presence of two truncated copies of IS1384 on the second plasmid in this strain, pPGH2. The inverted repeats of all IS1384 copies (including the truncated ones) are interrupted by the integration of an IS1383 element. All integrations were found to be site- and orientation-specific. PCR studies and sequence data indicate that IS1383 can form a circular intermediate on excision. In the circular form, the previously described 13-bp inverted repeats of IS1383 are separated by 10 bp that are identical to the 5-bp motif that flanks each side of the element when it is integrated in its target. We provide evidence that these additional nucleotides, although not of inverted symmetry, represent an essential part of the inverted repeats. Furthermore, the data indicate that IS1383 integrated into the inverted repeats of IS1384 by a site-specific recombination rather than a site-specific insertion event.     

Isolation, characterization, and nucleotide sequence of IS1202, an insertion sequence of Streptococcus pneumoniae.

A comparative hybridization protocol was used to isolate a small segment of DNA present in the Streptococcus pneumoniae type 19F strain SSZ but absent from strain Rx1, a nonencapsulated derivative of the type 2 strain D39. This segment of DNA is a 1,747-bp insertion sequence, designated IS1202, flanked by 23-bp imperfect inverted repeats and containing a single open reading frame sufficient to encode a 54.4-kDa polypeptide. A 27-bp target sequence is duplicated at either end of the element. IS1202 is not related to any of the currently known insertion elements and is the first reported for S. pneumoniae. Although found predominantly in type 19F strains in up to five copies, it has also been shown to be present in the chromosomes of pneumococci belonging to other serotypes. One of the four IS1202 copies in the encapsulated strain SSZ is located 1,009 bp downstream of the dexB gene, and transformation studies reveal that it is also closely linked to the type 19F capsular polysaccharide synthesis (cps) locus.     

Conjugative Interaction Induces Transposition of ISPst9 in Pseudomonas stutzeri AN10

ISPst9 is an ISL3-like insertion sequence (IS) that was recently described in the naphthalene-degrading organism Pseudomonas stutzeri strain AN10. In this paper we describe a novel strong IS regulation stimulus; transposition of ISPst9 is induced in all P. stutzeri AN10 cells after conjugative interaction with Escherichia coli. Thus, we observed that in all P. stutzeri AN10 cells that received genetic material by conjugation the ISPst9 genomic dose and/or distribution was changed. Furthermore, ISPst9 transposition was also observed when P. stutzeri AN10 cells were put in contact with the plasmidless conjugative strain E. coli S17-1λ_pir, but not when they were put in contact with E. coli DH5α (a nonconjugative strain). The mechanism of ISPst9 transposition was analyzed, and transposition was shown to proceed by excision from the donor DNA using a conservative mechanism, which generated 3- to 10-bp deletions of the flanking DNA. Our results indicate that ISPst9 transposes, forming double-stranded DNA circular intermediates consisting of the IS and a 5-bp intervening DNA sequence probably derived from the ISPst9 flanking regions. The kinetics of IS circle formation are also described.     

Activation and inactivation of Pseudomonas stutzeri methylbenzene catabolism pathways mediated by a transposable element

The arrangement of the genes involved in o-xylene, m-xylene, and p-xylene catabolism was investigated in three Pseudomonas stutzeri strains: the wild-type strain OX1, which is able to grow on o-xylene but not on the meta and para isomers; the mutant M1, which grows on m-xylene and p-xylene but is unable to utilize the ortho isomer; and the revertant R1, which can utilize all the three isomers of xylene. A 3-kb insertion sequence (IS) termed ISPs1, which inactivates the m-xylene and p-xylene catabolic pathway in P. stutzeri OX1 and the o-xylene catabolic genes in P. stutzeri M1, was detected. No IS was detected in the corresponding catabolic regions of the P. stutzeri R1 genome. ISPs1 is present in several copies in the genomes of the three strains. It is flanked by 24-bp imperfect inverted repeats, causes the direct duplication of 8 bp in the target DNA, and seems to be related to the ISL3 family.     

Identification and characterization of IS1381, a new insertion sequence in Streptococcus pneumoniae.

A new insertion sequence (IS1381) was identified in the genome of Streptococcus pneumoniae R6 as an 846-bp segment containing 20-bp terminal inverted repeats and flanked by 7-bp direct repeats. The three sequenced copies of this element have two overlapping open reading frame (ORF) genes named orfA and orfB. However, significant variations between individual copies were found, suggesting that inactivating mutations have occurred in an original single ORF. Accordingly, the consensus IS1381 element derived from the comparison of the three available copies should contain a single ORF sufficient to encode a basic protein of 267 amino acids which exhibited high similarity to the putative transposases of ISL2 from Lactobacillus helveticus and of IS702 from the cyanobacterium Calothrix sp. strain PCC 7601. A minimum of five to seven copies were detected by hybridization experiments in the R6 genome. In remarkable contrast with the two previously reported pneumococcal insertion sequences, several copies of IS1381 have been detected in all of the clinical isolates tested so far. Interestingly, Streptococcus oralis NCTC 11427 (type strain), a close relative of pneumococcus, does not contain this element, but its occurrence in the type strain of Streptococcus mitis (NCTC 12261) suggests that this species has exchanged DNA with S. pneumoniae directly or through an intermediate species.     

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci.

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.     

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci.

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.     

Is103, a New Insertion Element in Escherichia Coli: Characterization and Distribution in Natural Populations

IS103 is a previously unknown insertion sequence found in Escherichia coli K12. We have sequenced IS103 and find that it is a 1441-bp element that consists of a 1395-bp core flanked by imperfect 23-bp inverted repeats. IS103 causes a 6-bp duplication of the target sequence into which it inserts. There is a single copy of IS103 present in wild-type E. coli K12 strain HfrC. In strain X342 and its descendents there are two additional copies, one of which is located within the bglF gene. IS103 is capable of excising from within bglF and restoring function of that gene. IS103 exhibits 44% sequence identity with IS3, suggesting that the two insertion sequences are probably derived from a common ancestor. We have examined the distribution of IS103 in the chromosomes and plasmids of the ECOR collection of natural isolates of E. coli. IS103 is found in 36 of the 71 strains examined, and it strongly tends to inhabit plasmids rather than chromosomes. Comparison of the observed distribution of IS103 with distributions predicted by nine different models for the regulation of transposition according to copy number and of the effects of copy number on fitness suggest that transposition of IS103 is strongly regulated and that it has only minor effects on fitness. The strong clustering of IS103 within one phylogenetic subgroup of the E. coli population despite its presence on plasmids suggests that plasmids tend to remain within closely related strains and that transfer to distantly related strains is inhibited.     

Transposition of IS10 from the host Escherichia coli genome to a plasmid may lead to cloning artefacts

During recloning of Nicotiana tabacum L. repetitive sequence R8.3 in Escherichia coli, a modified clone that differed from the original by the insertion of an IS10 sequence was unintentionally produced. The insert was flanked by a 9-bp direct repeat derived from the R8.3 sequence, the 9-bp duplication of acceptor DNA in the site of insertion being a characteristic of IS10 transposition events. A database search using the FASTA program showed IS10 and other prokaryotic IS elements inserted into numerous eukaryotic clones. Unexpectedly, the IS10, which is not a natural component of the E. coli genome, appeared to be by far the most frequent contaminant of DNA databases among several IS sequences tested. In the GenEMBL database, the IS10 query sequence yielded positive scores with more than 500 eukaryotic clones. Insertions of shortened IS10 sequences having only one intact terminal inverted repeat were commonly found. Most full-length IS10 insertions (32 out of 40 analyzed) were flanked by 9-bp direct repeats having the consensus 5'-NPuCNN-NGPyN-3' with a strong preference for 5'-TGCTNA-GNN-3'. One insertion was flanked by an inverted repeat of more than 400 bp in length. PCR amplification and Southern analysis revealed the presence of IS10 sequences in E. coli strains commonly used for DNA cloning, including some reported to be Tn10-free. No IS10-specific PCR product was obtained with N. tabacum or human DNA. Our data suggest that transposition of IS10 elements may accompany cloning steps, particularly into large BAC vectors. This might lead to the relatively frequent contamination of DNA databases by this bacterial sequence. It is estimated that one in approximately every thousand eukaryotic clone in the databases is contaminated by IS-derived sequences. We recommend checking submitted sequences for the presence of IS10 and other IS elements. In addition, DNA databases should be corrected by removing contaminating IS sequences.     

Isolation and analysis of IS6120, a new insertion sequence from Mycobacterium smegmatis

Insertion sequence IS6120 from Mycobacterium smegmatis was identified by its ability to transpose into different sites in the lambda repressor gene, cl857, carried on an Escherichia coli/mycobacteria shuttle plasmid. IS6120 is a novel 1.5 kb insertion sequence, which has 24-bp imperfect terminal inverted repeats and generates 9-bp duplications of the target DNA following insertion. IS6120 is present in at least three copies in M. smegmatis but was not found in other species, including Mycobacterium tuberculosis. Nucleotide sequence analysis revealed that IS6120 contains two open reading frames, one of which encodes a putative transposase with similarities to those found in IS256 from Staphylococcus aureus, IST2 from Thiobacillus ferrooxidans, and ISRm3 from Rhizobium meliloti. The fact that IS6120 does not recognize a consensus target sequence for insertion and has no homologous sequences in the other strains studied makes IS6120 useful for transposon mutagenesis in mycobacteria.     

Identification, distribution, and sequence analysis of new insertion elements in Caulobacter crescentus.

We describe two insertion elements isolated from Caulobacter crescentus that are designated IS298 and IS511. These insertion elements were cloned from spontaneous flagellar (fla) gene mutants SC298 and SC511 derived from the wild-type strain CB15 (ATCC 19089), in which they were originally identified as insertions in the flbG operon of the hook gene cluster (N. Ohta, E. Swanson, B. Ely, and A. Newton, J. Bacteriol. 158:897-904, 1984). IS298 and IS511 were each present in C. crescentus CB2 and CB15 in at least four different positions, but neither was present in strain CB13 or in several Caulobacter species examined, including C. vibrioides, C. leidyia, and C. henricii. Nucleotide sequence analysis across the chromosome-insertion element junctions showed that IS298 is located 152 base pairs (bp) upstream from the ATG translation start of the hook protein gene flaK, where it is bounded by a 4-bp direct repeat derived from the site of insertion, and that IS511 is inserted at codon 186 of the flaK coding sequence, where it is also bounded by a 4-bp direct repeat duplicated from the site of insertion. The ilvB102 mutation in strain SC125 was also shown to result from insertion sequence IS511, but no duplication of the genomic sequence was present at the insertion element junctions. IS298 contains an imperfect terminal inverted repeat 16 bp long, and IS511 contains a 32-bp inverted repeat at the termini. IS298 and IS511 are the first insertion elements described in C. crescentus.     

IS861, a group B streptococcal insertion sequence related to IS150 and IS3 of Escherichia coli.

A 1,442-base-pair (bp) insertion sequence (IS861) was identified in the type III group B streptococcal (GBS) strain COH-1. It is flanked by 26-bp imperfect inverted repeats and contains two open reading frames, 1 and 2, encoding 141- and 277-amino-acid proteins, respectively. A 3-bp target sequence, ACA, is duplicated and flanks each inverted repeat. IS861 shares greater than 30% homology with IS3 and IS150 of Escherichia coli, primarily in the region of their putative transposases. Northern (RNA) analysis revealed that RNA is actively transcribed in vivo by IS861 and 17- and 36-kilodalton proteins were synthesized in E. coli maxicell assays. Multiple copies of IS861 were observed throughout the chromosome of COH-1, and one of the copies is located near genes involved in GBS capsule synthesis. IS861 is the first insertion sequence identified in GBS. Its role in GBS and the significance of its relationship to the phylogenetically similar insertion sequences typified by IS150 and IS3 of E. coli are unknown.     

Identification of a second endogenous Porphyromonas gingivalis insertion element.

In this study a second endogenous Porphyromonas gingivalis insertion element (IS element) that is capable of transposition within P. gingivalis was identified. Nucleotide sequence analysis of the Tn4351 insertion site in a P. gingivalis Tn4351-generated transconjugant showed that a complete copy of the previously unidentified IS element, designated PGIS2, had inserted into IS4351R in Tn4351. PGIS2 is 1,207 bp in length with 19-bp imperfect terminal inverted repeats, and insertion resulted in a duplicated 10-bp target sequence. Results of Southern hybridization of chromosomal DNA isolated from several P. gingivalis strains with a PGIS2-specific probe demonstrated that the number of copies of PGIS2 per genome varies among different P. gingivalis strains. Computer analysis of the putative polypeptide encoded by PGIS2 revealed strong homologies to the products encoded by IS1358 from Vibrio cholerae, ISAS1 from Aeromonas salmonicida, and H-rpt in Escherichia coli K-12.     

Artificial transposable elements in the study of the ends of IS1

We have constructed artificial IS1-based transposons by attaching synthetic oligodeoxynucleotides, corresponding to the sequence of the ends of IS1, to a selectable DNA segment ['omega' fragment; Prentki and Krisch, Gene 29 (1984) 303-313]. These transposons were used to examine the sequence requirements at the ends for IS1 transposition. We show here that a 24- to 28-bp sequence from the left or right ends of IS1 is capable of transposition when present at both ends of the omega fragment in the correct orientation. Transposition activity requires the presence of an intact IS1 in cis on the same plasmid molecule. In trans, however, neither resident genomic copies of IS1, nor copies carried by a compatible, high-copy-number plasmid present in the same cell, complement the artificial transposons efficiently. Transposition frequencies in the presence of a cis-complementing IS1 are, however, similar to those of the naturally occurring IS1-based transposon, Tn9. In addition, transposition results in a 9-bp duplication in the target DNA molecule as is usually the case for insertion of the intact IS1. Using this system, we have obtained evidence indicating that the activity of a synthetic IS1 end is not determined exclusively by its sequence, but can be strongly enhanced by a second, wild-type end used in the transposition event. The data also show that single base pair mutations can exhibit a cumulative effect in reducing transposition activity.     

Evidence for insertion sequence-mediated spread of the thermostable direct hemolysin gene among Vibrio species.

The tdh gene of Vibrio parahaemolyticus which encodes the thermostable direct hemolysin has been found in some strains of other Vibrio species. Analysis of seven tdh genes cloned from V. parahaemolyticus, Vibrio mimicus, and non-O1 Vibrio cholerae revealed that all tdh genes were flanked by insertion sequence-like elements (collectively named ISVs) or related sequences derived from genetic rearrangement of ISVs. The ISVs possessed 18-bp terminal inverted repeats highly homologous to those of IS903 (2- to 4-bp mismatch) and were 881 to 1,058 bp long with less than 33.6% sequence divergence. These features and nucleotide sequence similarities among ISVs and IS903 (overall homologies between ISVs and IS903, ca. 50%) strongly suggest that they were derived from a common ancestral sequence. A family of ISVs were widely distributed in Vibrio species, often regardless of the possession of the tdh genes, and one to several copies of the ISVs per organism were detected. A strain of V. mimicus possessed two copies of the ISVs flanking the tdh gene and three copies unrelated to the tdh gene. However, the transposition activity of the ISVs could not be demonstrated, probably because they had suffered from base changes and insertions and deletions within the transposase gene. The possible mode of ISV-mediated spread of the tdh gene is discussed from an evolutionary standpoint.     

Identification and characterization of IS1112 and IS1113 insertion element sequences in Xanthomonas oryzae pv. oryzae.

Two new insertion sequences (IS1112 and IS1113) were identified in the genome of Xanthomonas oryzae pv. oryzae, the causal agent of bacterial blight of rice. Three copies of IS1112 were trapped, one containing 1052-bp and the other two with 1055-bp. They all have 25-bp imperfect inverted repeats with a 3-bp duplication at the site of insertion. They contain an open reading frame (ORF) of 317 and 318 amino acid residues, respectively. IS1113 is 1306-bp, contains 25-bp imperfect terminal inverted repeats, and is flanked by a 9-bp direct repeat at the site of insertion. It contains an ORF of 395 amino acid residues.     

Characterization and distribution of IS8301 in the radioresistant bacterium Deinococcus radiodurans

The insertion sequence element IS8301 isolated from the radiation resistant bacterium Deinococcus radiodurans strain KD8301 was characterized. IS8301 is comprised of 1,736-bp, lacks terminal inverted repeats and does not duplicate target DNA upon its insertion. The amino acid sequence homology of two open reading frames encoded in IS8301 indicates that this insertion sequence element belongs to the IS200/IS605 group. There were seven loci completely identical with the IS8301 sequence in the published D. radiodurans R(1) genome sequence. The genome distribution profiles of IS8301 in strain KD8301 as well as in the three different laboratory isolates (KR(1), MR(1), and R(1)) of wild-type D. radiodurans were investigated using genomic hybridization analysis. At least 21 strong hybridization signals were detected in strain KD8301 while only one hybridization signal was detected in strain KR(1), the parent strain of KD8301. In strain MR1, a different wild-type isolate, six strong hybridization signals were detected. In spite of the identification of seven copies of IS8301 in the published D. radiodurans R(1) genome sequence, only one hybridization signal was detected in strain R(1) purchased from American Type Culture Collection. Using inverse PCR and sequencing analyses, total 13 different insertion loci of IS8301 in the D. radiodurans genome were identified. Sequence comparison of the flanking region of insertion sites indicated that the sequence 5'-TTGAT-3' preceded the left end of IS8301 in all cases.     

Conjugal transfer and mobilization capacity of the completely sequenced naphthalene plasmid pNAH20 from multiplasmid strain Pseudomonas fluorescens PC20

The complete 83 042-bp nucleotide sequence of the IncP-9 naphthalene degradation plasmid pNAH20 from Pseudomonas fluorescens PC20 exhibits striking similarity in size and sequence to another naphthalene (NAH) plasmid pDTG1. However, the positions of insertion sequence (IS) elements significantly alter both catabolic and backbone functions provided by the two plasmids. In pDTG1, insertion of a pCAR1 IS Pre1 -like element disrupts expression of the lower naphthalene operon and this strain utilizes the chromosomal pathway for complete naphthalene degradation. In pNAH20, this operon is intact and functional. The transfer frequency of pNAH20 is 100 times higher than that of pDTG1 probably due to insertion of the pCAR1 IS Pre2 -like element into the mpfR gene coding for a putative repressor of the mpf operon responsible for mating pilus formation. We also demonstrate in situ plasmid transfer – we isolated a rhizosphere transconjugant strain of pNAH20, P. fluorescens NS8. The plasmid pNS8, a derivative of pNAH20, lacks the ability to self-transfer as a result of an additional insertion event of IS Pre2 -like element that disrupts the gene coding for VirB2-like major pilus protein MpfA. The characteristics of the strain PC20 and the conjugal transfer/mobilization capacity of pNAH20 (or its backbone) make this strain/plasmid a potentially successful tool for bioremediation applications.     

Identification of insertion sequence element IS427 in pTiT37 plasmid DNA of an Agrobacterium tumefaciens T37 isolate

The isolation and characterization of an insertion sequence (IS) element, IS427, from Agrobacterium tumefaciens T37 is described. IS427 is present in three nonidentical copies on the pTiT37 plasmid. The copy that was isolated through transposition on the entrapment vector pUCD800 contains at its ends a 16-bp imperfect inverted repeat and generates a 2-bp duplication of the target DNA. IS427 does not show homology with previously characterized IS elements of A. tumefaciens, based on hybridization experiments and/or sequence comparison.