Molecular aspects of the bilayer stabilization induced by poly(L-lysines) of varying size in cardiolipin liposomes

The interaction between poly(L-lysines) of varying size with cardiolipin was investigated via binding assays, X-ray diffraction, freeze-fracture electron microscopy, and 31P- and 13C-NMR. Binding of polylysines to the lipid only occurred when three or more lysine residues were present per molecule. The strength of the binding was highly dependent on the polymerization degree, suggesting a cooperative interaction of the lysines within the polymer. Upon binding, a structural reorganization of the lipids takes place, resulting in a closely packed multilamellar system in which the polylysines are sandwiched in between subsequent bilayers. Acyl chain motion is reduced in these liquid-crystalline peptide-lipid complexes. From competition experiments with Ca2+ it could be concluded that when the affinity of the polylysine for cardiolipin was much larger than that of Ca2+, a lamellar polylysine-lipid complex was formed, irrespective of whether an excess of Ca2+ was added prior to or after the polypeptide. When the affinity of the polylysine for cardiolipin was less or of the same order as that of Ca2+, the lipid was organized in the hexagonal HII phase in the presence of Ca2+. These results are discussed in the light of the peptide specificity of bilayer (de)stabilization in cardiolipin model membranes.     

Reconstitution mechanism of nucleosome core particles mediated by poly(l-glutamic acid)

Poly(l-glutamic acid) has been reported to mediate in vitro nucleosome assembly (Stein, A., Whitlock, J.P., Jr. and Bina, M. (1979) Proc. Natl. Acad. Sci. U.S.A. 76, 5000–5004). To study the reaction mechanism, we have reconstituted nucleosome core particles from chicken erythrocyte core DNA and core histones in the presence of poly(l-glutamic acid) and analyzed the assembly products by polyacrylamide gel electrophoresis. Poly(l-glutamic acid), which binds and forms a large complex with core histones, is replaced with core DNA in the reconstitution process. When histone-poly(l-glutamic acid) complex and core DNA are mixed with a histone:DNA ratio of 1.0, the yield of core particles increases by prolonged reconstitution time. Two phases with a distinct time range appear in the process. In the fast phase within 30 min, 60% of the DNA is involved in products containing histones: reconstituted core particles, a larger nucleoprotein complex and aggregation. In the second phase, the remaining DNA and the DNA in the aggregation decrease, and the core particles increase slowly. The yield of core particles is approx. 60% after 24 h. The slow phase is not observed by reconstitution with a histone:DNA ratio of 2.0 in the initial mixture. The reaction scheme of the assembly process derived from these data is given. Based on the in vitro reaction scheme, the possible role of in vivo ‘nucleosome assembly factors’ is also discussed.     

Interaction of cytoplasmic l-glycerol-3-phosphate dehydrogenase with liposomes

NAD-linked l-glycerol-3-phosphate dehydrogenase binds to phosphatidylcholine liposomes as shown by the changes in the properties of both the enzyme and the membrane. The surface potential and the fluidity of the liposome membrane (monitored at the 5th C atom depth) change due to the presence of the enzyme, whereas the enzyme is activated by the liposomes. These findings suggest the occurrence of peripheral protein-lipid interactions.     

CNDO/2 calculations of the relative stability of poly (l-proline I) and poly (l-proline II)

The CNDO/2 method using the tight binding approximation for polymers was applied to poly(l-proline I) and poly(l-proline II). The calculations were also carried out for poly(l-alanines) and model molecules which have the same backbone geometrics as those of poly(l-prolines). The results obtained show that both forms of poly(l-proline I) and poly(l-proline II) have nearly the same energy in agreement with experimental results. From the analysis of the total energy, it was found that the intrasegment energy of poly(l-proline II) was lower than that of poly(l-proline I) while the intersegment energy of poly(l-proline I) was lower than that of poly(l-proline II). This result can be considered to correspond well with the experimental fact that poly(l-proline II) is more stable in good or polar solvents and poly(l-proline I) in poor or non-polar solvents. The analysis of the total energy of poly(l-proline) leads us to the conclusion that the α and β carbons play an important role in determining the relative stability between poly(l-proline I) and poly(l-proline II) and the γ carbon does hvae a marked effect on the electronic structures of the polymers in question. This conclusion was also confirmed by comparison of the electronic structures of poly(l-prolines) with those of poly(l-alanines) and model compounds concerned.     

Production of l-lactic acid by electrodialysis fermentation (EDF)

An efficient process for producing l-lactic acid using an, EDF method is described. The results showed that intermittent EDF with continuous medium feed was the best one among the experiment methods employed. Comparing with the conventional EDF, intermittent EDF (seven on–off) with continuous medium feed indicated that the maximum value of o.d.₆₆₀ was not increased, but productivity was 1.5 times higher. The yield increased by above 30% and glucose transport decreased to 1/10 (from 0.46 to 0.05).     

Reconstitution mechanism of nucleosome core particles mediated by poly(l-glutamic acid)

Poly(l-glutamic acid) has been reported to mediate in vitro nucleosome assembly (Stein, A., Whitlock, J.P., Jr. and Bina, M. (1979) Proc. Natl. Acad. Sci. U.S.A. 76, 5000–5004). To study the reaction mechanism, we have reconstituted nucleosome core particles from chicken erythrocyte core DNA and core histones in the presence of poly(l-glutamic acid) and analyzed the assembly products by polyacrylamide gel electrophoresis. Poly(l-glutamic acid), which binds and forms a large complex with core histones, is replaced with core DNA in the reconstitution process. When histone-poly(l-glutamic acid) complex and core DNA are mixed with a histone:DNA ratio of 1.0, the yield of core particles increases by prolonged reconstitution time. Two phases with a distinct time range appear in the process. In the fast phase within 30 min, 60% of the DNA is involved in products containing histones: reconstituted core particles, a larger nucleoprotein complex and aggregation. In the second phase, the remaining DNA and the DNA in the aggregation decrease, and the core particles increase slowly. The yield of core particles is approx. 60% after 24 h. The slow phase is not observed by reconstitution with a histone:DNA ratio of 2.0 in the initial mixture. The reaction scheme of the assembly process derived from these data is given. Based on the in vitro reaction scheme, the possible role of in vivo ‘nucleosome assembly factors’ is also discussed.     

Guinea pig serum l-asparaginase: Purification, and immunological relationship to liver l-asparaginase and serum l-asparaginases in other mammals

l-asparaginase, an enzyme used in the treatment of acute lymphocytic leukemia, is found in the serum of only a few mammalian groups, including the guinea pig and its close relatives in the superfamily Cavioidea. This report describes the purification and characterization of l-asparaginase from guinea pig serum. Antiserum against the purified enzyme cross-reacted with sera from other Cavioidean species but not with mouse serum. Relatively weak cross-reaction with unpurified l-asparaginase in guinea pig liver indicates a significant degree of evolutionary divergence.     

The use of poly(L-proline)-Sepharose in the isolation of profilin and profilactin complexes

In the purification of proline hydroxylase by affinity chromatography on poly(L-proline)-Sepharose it was found earlier that two other components, profilin and the complex profilin-actin, also bind with high affinity to this matrix. We have exploited this observation to develop a rapid procedure for the isolation of profilin and profilin-actin complexes in high yields directly from high-speed supernatants of crude tissue-extracts. Through an extensive search for elution conditions, avoiding poly(L-proline) as the desorbant, we have found that active proteins can be recovered from the affinity column with a buffer containing 30% dimethyl sulphoxide. Subsequent chromatography on hydroxylapatite separates free profilin and the two isoforms of profilactin, profilin-actin_β and profilin-actin_γ. The profilin-actin complexes produced this way have high specific activities in the DNAase-inhibition assay, give rise to filaments on addition of Mg²⁺, and can be crystallized. From the isolated profilin-actin complexes the β- and γ-actin isoforms of non-muscle cells can easily be prepared in a polymerization competent form. Pure profilin is either obtained from an excess pool present in some extracts or by dissociation of profilin-actin complexes and removal of the actin.     

Poly-l-lysines and poly-l-arginines induce leakage of negatively charged phospholipid vesicles and translocate through the lipid bilayer upon electrostatic binding to the membrane

Poly-l-lysines (PLL) and poly-l-arginines (PLA) of different polymer chain lengths interact strongly with negatively charged phospholipid vesicles mainly due to their different electrical charges. 1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG), 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG) and their mixtures (1/1 mol/mol) with the respective phosphatidylcholines of equivalent chain length were chosen as model membrane systems that form at room temperature either the fluid L_α or the gel phase L_β lipid bilayer membranes, respectively. Leakage experiments revealed that the fluid POPG membranes are more perturbed compared to the gel phase DPPG membranes upon peptide binding. Furthermore, it was found that pure PG membranes are more prone to release the vesicle contents as a result of pore formation than the lipid mixtures POPG/POPC and DPPG/DPPC. For the longer polymers (≥ 44 amino acids) maximal dye-release was observed when the molar ratio of the concentrations of amino acid residues to charged lipid molecules reached a value of R_P = 0.5, i.e. when the outer membrane layer was theoretically entirely covered by the polymer. At ratios lower or higher than 0.5 leakage dropped significantly. Furthermore, PLL and PLA insertions and/or translocations through lipid membranes were analyzed by using FITC-labeled polymers by monitoring their fluorescence intensity upon membrane binding. Short PLL molecules and PLA molecules of all lengths seemed to translocate through both fluid and gel phase lipid bilayers. Comparison of the PLL and PLA fluorescence assay results showed that PLA interacts stronger with phospholipid membranes compared to PLL. Isothermal titration calorimetry (ITC) measurements were performed to give further insight into these mechanisms and to support the findings obtained by fluorescence assays. Cryo-transmission electron microscopy (cryo-TEM) was used to visualize changes in the vesicles' morphology after addition of the polypeptides.     

Hydroxylation of l-proline to cis-3-hydroxy-l-proline by recombinant Escherichia coli expressing a synthetic l-proline-3-hydroxylase gene

A synthetic gene encoding a Streptomyces l-proline-3-hydroxylase was constructed and used to produce the hydroxylase protein in recombinant Escherichia coli. A fermentation process for growth of this recombinant E. coli for enzyme production was scaled-up to 250 L. A biotransformation process was developed using cell suspensions of the recombinant E. coli and subsequently scaled-up to 10 L for conversion of l-proline to cis-3-hydroxy-l-proline. A reaction yield of 85 M% and d.e. of 99.9% was obtained for cis-3-hydroxy-l-proline.     

Pharmacokinetics of poly(hydroxyethyl-l-asparagine)-coated liposomes is superior over that of PEG-coated liposomes at low lipid dose and upon repeated administration

‘Stealth’ liposomes with a poly(ethylene glycol) (PEG) coating are frequently studied for drug delivery and diagnostic purposes because of their prolonged blood circulation kinetics. However, several recent reports have demonstrated that PEG-liposomes are rapidly cleared at single low lipid doses (< 1 μmol/kg) and upon repeated administration (time interval between the injections 5 days-4 weeks). Recently, poly(amino acid)-based stealth liposome coatings have been developed as alternative to the PEG-coating. In this study, the pharmacokinetic behavior of liposomes coated with the poly(amino acid) poly(hydroxyethyl-l-asparagine) (PHEA) was evaluated at low lipid doses and upon repeated administration in rats. Blood circulation times and hepatosplenic localization of PHEA-liposomes were assessed after intravenous injection. When administered at a dose of 0.25 μmol/kg or less, PHEA-liposomes showed significantly longer blood circulation times than PEG-liposomes. A second dose of PHEA-liposomes 1 week after the first injection was less rapidly cleared from the circulation than a second dose of PEG-liposomes. Although the mechanisms behind these observations are still not clear yet, the use of PHEA-liposomes appears beneficial when single low lipid doses and/or repeated dosing schedules are being applied.     

Molecular mass control using polyanionic cyclodextrin derivatives for the epsilon-poly-l-lysine biosynthesis by Streptomyces

To control the molecular mass of a natural polycationic, antimicrobial, Streptomyces-biosynthesized polymer, epsilon-poly-l-lysine, addition of polyanionic cyclodextrin derivatives to the culture medium was evaluated. Chemically modified cyclodextrins such as a sulfated cyclodextrin caused a notable shortening of the polymer length of epsilon-poly-l-lysine from 3.5 to 4.5 kDa to less than 2.5 kDa by the enforcing action of glycerol, which has a weak potential to inhibit polymer elongation by terminal esterification. Meanwhile, polyanionic cyclodextrin inhibited the shortening action with n-octanol, which has a strong ability to inhibit polymer elongation through an undetermined function. The design of chemical structures of polyanionic cyclodextrin, optimization of their addition concentrations, and selection of hydroxyl compounds coexisting with them are critical for this simple and easy method for polymer length control and terminal modification of epsilon-poly-l-lysine.     

Transport of l-ascorbic acid and dehydro-l-ascorbic acid across renal cortical basolateral membrane vesicles

The uptake of l-ascorbic acid and dehydro-l-ascorbic acid into renal cortical basolateral membrane vesicles has been characterized. The uptake systems for both solutes demonstrate saturation kinetics. The presence of structural analogs of l-ascorbic acid and dehydro-l-ascorbic acid results in cis-inhibition and trans-stimulation. Uptake of each substrate is Na⁺-independent, proceeding to an endpoint of substrate equilibrium across the vesicular membrane. The transport mechanism(s) for l-ascorbic acid and dehydro-l-ascorbic acid appears to be facilitated diffusion.     

Silk fibroin model,poly(l-alanylglycyl-l-alanylglycyl-l-alanylglycyl-l-seryglycine)

l-Alanylglycyl-l-alanylglycyl-l-alanylglycyl-l-serylglycine and its pentachlorophenyl ester methanesulphonate have been synthesized as monomers for the preparation of silk fibroin model polypeptide. The former octapeptide was polymerized with diphenylphosphorylazide (DPPA) and triethylamine in DMSO or in HMPA—pyridine, and the latter octapeptide pentachlorophenylester was polymerized by adding triethylamine in DMSO to give poly(l-alanylglycyl-l-alanylglycyl-l-alanylglycyl-l-serylglycine). This sequential polypeptide gave a similar i.r. pattern to the crystalline part of Bombyx mori silk fibroin, which indicated antiparallel β-conformation. Dialysis of the solution of this polymer in 60%, aqueous LiBr against water gave mainly the polymer of α-form. O.r.d. measurements suggest that this polypeptide exists as a random structure in dichloroacetic acid on in 60% aqueous LiBr.     

Inhibitors of bacterial N-succinyl-l,l-diaminopimelic acid desuccinylase (DapE) and demonstration of in vitro antimicrobial activity

The dapE-encoded N-succinyl-l,l-diaminopimelic acid desuccinylase (DapE) is a critical bacterial enzyme for the construction of the bacterial cell wall. A screen biased toward compounds containing zinc-binding groups (ZBG’s) including thiols, carboxylic acids, boronic acids, phosphonates and hydroxamates has delivered a number of micromolar inhibitors of DapE from Haemophilus influenzae, including the low micromolar inhibitor l-captopril (IC₅₀ = 3.3 μM, K_i = 1.8 μM). In vitro antimicrobial activity was demonstrated for l-captopril against Escherichia coli.     

l-DOPA (l-3,4-dihydroxyphenylalanine) uptake by human red blood cells

The uptake of l-DOPA (l-3,4-dihydroxyphenylalanine) was studied in normal human red blood cells in vitro using l-[3-¹⁴C]DOPA. Uptake was slow, tending towards a distribution ratio close to unity with a half-time to equilibrium of one hour. Uptake was not Na⁺-dependent. Concentration dependence studies showed both saturable and non-saturable components of uptake, and inhibition studies using l-leucine and l-tryptophan suggest that the L and T systems of red cell amino acid uptake are involved. A powerful inhibitor of both systems, 3,4-dihydroxy-2-methylpropriophenone (U-0521), is described. It is concluded that uptake is by carrier-mediated facilitated diffusion via the L and T systems for which l-DOPA has low affinity.     

Relative stability of poly(β-hydroxy-l-proline)

The semiempirical CNDO/2 SCF MO method using the tight-binding approximation for polymers has been applied to poly(β-hydroxy-l-proline), β-PHP, to compare the electronic structure of β-PHP with that of poly(γ-hydroxy-l-proline), γ-PHP, which we have described in a previous publication. The results obtained show the preferred orientation of the OH group at the β-position of the pyrrolidine ring. The different situation between β-PHP and γ-PHP is briefly discussed. Analysis of the calculated results shows that the energy difference between the two species is not sufficient to deny the existence of either form. This agrees well with the experimental results. The conformational stability between the trans and cis forms of the H---:C---:O---:H group is explained by using the calculated results in connection with the previous experimental and theoretical treatments. From the analysis of the total energy, the dominant stabilizing factors are discussed.     

Profilin oligomerization and its effect on poly (l-proline) binding and phosphorylation

Profilin is a cytoskeletal protein that interacts specifically with actin, phosphoinositides and poly (l-proline). Experimental results and in silico studies revealed that profilin exists as dimer and tetramer. Profilin oligomers possess weak affinity to poly (l-proline) due to unavailability of binding sites in dimers and tetramers. Phosphorylation studies indicate that profilin dimers are not phosphorylated while teramers are preferentially phosphorylated over monomers. In silico studies revealed that PKC phosphorylation site, S137 is buried in dimer while it is accessible in tetramer.